For register maps, we need a dense numbering of registers that may
contain pointers of interest to the garbage collector. Add this to
Register and compute it from the GP register set.
For #24543.
Change-Id: If6f0521effca5eca4d17895468b1fc52d67e0f32
Reviewed-on: https://go-review.googlesource.com/109351
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Compiling without optimizations (-N) can result in write barrier
blocks that have been optimized away but not actually pruned from the
block set. Fix unsafe-point analysis to recognize and ignore these.
For #24543.
Change-Id: I2ca86fb1a0346214ec71d7d6c17b6a121857b01d
Reviewed-on: https://go-review.googlesource.com/114076
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
- Uncomment tests for AVX512 encoder
- Permit instruction suffixes for x86
- Permit limited reg list [reg-reg] syntax for x86 for multi-source ops
- EVEX encoding support in obj/x86 (Z-cases, asmevex, etc.)
- optabs and ytabs generated by x86avxgen (https://golang.org/cl/107216)
Note: suffix formatting implemented with updated CConv function.
Now arch asm backend should register formatting function by
calling RegisterOpSuffix.
Updates #22779
Change-Id: I076a167ee49582700e058c56ad74e6696710c8c8
Reviewed-on: https://go-review.googlesource.com/113315
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
1. Some incorrect test cases are disabled.
2. Some wrong test cases are corrected.
3. Some new test cases are added.
Change-Id: Ib5d0473d55159f233ddab79f96967eaec7b08597
Reviewed-on: https://go-review.googlesource.com/113736
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This modifies issafepoint in liveness analysis to report almost every
operation as a safe point. There are four things we don't mark as
safe-points:
1. Runtime code (other than at calls).
2. go:nosplit functions (other than at calls).
3. Instructions between the load of the write barrier-enabled flag and
the write.
4. Instructions leading up to a uintptr -> unsafe.Pointer conversion.
We'll optimize this in later CLs:
name old time/op new time/op delta
Template 185ms ± 2% 190ms ± 2% +2.95% (p=0.000 n=10+10)
Unicode 96.3ms ± 3% 96.4ms ± 1% ~ (p=0.905 n=10+9)
GoTypes 658ms ± 0% 669ms ± 1% +1.72% (p=0.000 n=10+9)
Compiler 3.14s ± 1% 3.18s ± 1% +1.56% (p=0.000 n=9+10)
SSA 7.41s ± 2% 7.59s ± 1% +2.48% (p=0.000 n=9+10)
Flate 126ms ± 1% 128ms ± 1% +2.08% (p=0.000 n=10+10)
GoParser 153ms ± 1% 157ms ± 2% +2.38% (p=0.000 n=10+10)
Reflect 437ms ± 1% 442ms ± 1% +0.98% (p=0.001 n=10+10)
Tar 178ms ± 1% 179ms ± 1% +0.67% (p=0.035 n=10+9)
XML 223ms ± 1% 229ms ± 1% +2.58% (p=0.000 n=10+10)
[Geo mean] 394ms 401ms +1.75%
No effect on binary size because we're not yet emitting these extra
safe points.
For #24543.
Change-Id: I16a1eebb9183cad7cef9d53c0fd21a973cad6859
Reviewed-on: https://go-review.googlesource.com/109348
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Currently liveness only produces a stack map index at each safe point,
so the information is summarized in a map[*ssa.Value]int. We're about
to have both a stack map index and a register map index, so replace
the int with a LivenessIndex type we can extend, and replace the map
with a LivenessMap that we can also change more easily in the future.
This also gives us an easy hook for defining the value that means "not
a safe point".
Passes toolstash -cmp.
For #24543.
Change-Id: Ic4c069839635efed4fd0f603899b80f8be3b56ec
Reviewed-on: https://go-review.googlesource.com/109347
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The obj package needs to emit the PCDATA to select the entry stack map
before calling morestack. Currently this is copied for every
architecture. Since we're about to change how this works, consolidate
all of these copies into a single helper function.
For #24543.
Change-Id: Ia92d94de78f8e23fd06dba747c43e03e5989f67b
Reviewed-on: https://go-review.googlesource.com/109346
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Currently, range loops over slices and arrays are compiled roughly
like:
for i, x := range s { b }
⇓
for i, _n, _p := 0, len(s), &s[0]; i < _n; i, _p = i+1, _p + unsafe.Sizeof(s[0]) { b }
⇓
i, _n, _p := 0, len(s), &s[0]
goto cond
body:
{ b }
i, _p = i+1, _p + unsafe.Sizeof(s[0])
cond:
if i < _n { goto body } else { goto end }
end:
The problem with this lowering is that _p may temporarily point past
the end of the allocation the moment before the loop terminates. Right
now this isn't a problem because there's never a safe-point during
this brief moment.
We're about to introduce safe-points everywhere, so this bad pointer
is going to be a problem. We could mark the increment as an unsafe
block, but this inhibits reordering opportunities and could result in
infrequent safe-points if the body is short.
Instead, this CL fixes this by changing how we compile range loops to
never produce this past-the-end pointer. It changes the lowering to
roughly:
i, _n, _p := 0, len(s), &s[0]
if i < _n { goto body } else { goto end }
top:
_p += unsafe.Sizeof(s[0])
body:
{ b }
i++
if i < _n { goto top } else { goto end }
end:
Notably, the increment is split into two parts: we increment the index
before checking the condition, but increment the pointer only *after*
the condition check has succeeded.
The implementation builds on the OFORUNTIL construct that was
introduced during the loop preemption experiments, since OFORUNTIL
places the increment and condition after the loop body. To support the
extra "late increment" step, we further define OFORUNTIL's "List"
field to contain the late increment statements. This makes all of this
a relatively small change.
This depends on the improvements to the prove pass in CL 102603. With
the current lowering, bounds-check elimination knows that i < _n in
the body because the body block is dominated by the cond block. In the
new lowering, deriving this fact requires detecting that i < _n on
*both* paths into body and hence is true in body. CL 102603 made prove
able to detect this.
The code size effect of this is minimal. The cmd/go binary on
linux/amd64 increases by 0.17%. Performance-wise, this actually
appears to be a net win, though it's mostly noise:
name old time/op new time/op delta
BinaryTree17-12 2.80s ± 0% 2.61s ± 1% -6.88% (p=0.000 n=20+18)
Fannkuch11-12 2.41s ± 0% 2.42s ± 0% +0.05% (p=0.005 n=20+20)
FmtFprintfEmpty-12 41.6ns ± 5% 41.4ns ± 6% ~ (p=0.765 n=20+19)
FmtFprintfString-12 69.4ns ± 3% 69.3ns ± 1% ~ (p=0.084 n=19+17)
FmtFprintfInt-12 76.1ns ± 1% 77.3ns ± 1% +1.57% (p=0.000 n=19+19)
FmtFprintfIntInt-12 122ns ± 2% 123ns ± 3% +0.95% (p=0.015 n=20+20)
FmtFprintfPrefixedInt-12 153ns ± 2% 151ns ± 3% -1.27% (p=0.013 n=20+20)
FmtFprintfFloat-12 215ns ± 0% 216ns ± 0% +0.47% (p=0.000 n=20+16)
FmtManyArgs-12 486ns ± 1% 498ns ± 0% +2.40% (p=0.000 n=20+17)
GobDecode-12 6.43ms ± 0% 6.50ms ± 0% +1.08% (p=0.000 n=18+19)
GobEncode-12 5.43ms ± 1% 5.47ms ± 0% +0.76% (p=0.000 n=20+20)
Gzip-12 218ms ± 1% 218ms ± 1% ~ (p=0.883 n=20+20)
Gunzip-12 38.8ms ± 0% 38.9ms ± 0% ~ (p=0.644 n=19+19)
HTTPClientServer-12 76.2µs ± 1% 76.4µs ± 2% ~ (p=0.218 n=20+20)
JSONEncode-12 12.2ms ± 0% 12.3ms ± 1% +0.45% (p=0.000 n=19+19)
JSONDecode-12 54.2ms ± 1% 53.3ms ± 0% -1.67% (p=0.000 n=20+20)
Mandelbrot200-12 3.71ms ± 0% 3.71ms ± 0% ~ (p=0.143 n=19+20)
GoParse-12 3.22ms ± 0% 3.19ms ± 1% -0.72% (p=0.000 n=20+20)
RegexpMatchEasy0_32-12 76.7ns ± 1% 75.8ns ± 1% -1.19% (p=0.000 n=20+17)
RegexpMatchEasy0_1K-12 245ns ± 1% 243ns ± 0% -0.72% (p=0.000 n=18+17)
RegexpMatchEasy1_32-12 71.9ns ± 0% 71.7ns ± 1% -0.39% (p=0.006 n=12+18)
RegexpMatchEasy1_1K-12 358ns ± 1% 354ns ± 1% -1.13% (p=0.000 n=20+19)
RegexpMatchMedium_32-12 105ns ± 2% 105ns ± 1% -0.63% (p=0.007 n=19+20)
RegexpMatchMedium_1K-12 31.9µs ± 1% 31.9µs ± 1% ~ (p=1.000 n=17+17)
RegexpMatchHard_32-12 1.51µs ± 1% 1.52µs ± 2% +0.46% (p=0.042 n=18+18)
RegexpMatchHard_1K-12 45.3µs ± 1% 45.5µs ± 2% +0.44% (p=0.029 n=18+19)
Revcomp-12 388ms ± 1% 385ms ± 0% -0.57% (p=0.000 n=19+18)
Template-12 63.0ms ± 1% 63.3ms ± 0% +0.50% (p=0.000 n=19+20)
TimeParse-12 309ns ± 1% 307ns ± 0% -0.62% (p=0.000 n=20+20)
TimeFormat-12 328ns ± 0% 333ns ± 0% +1.35% (p=0.000 n=19+19)
[Geo mean] 47.0µs 46.9µs -0.20%
(https://perf.golang.org/search?q=upload:20180326.1)
For #10958.
For #24543.
Change-Id: Icbd52e711fdbe7938a1fea3e6baca1104b53ac3a
Reviewed-on: https://go-review.googlesource.com/102604
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Currently, we compile range loops into for loops with the obvious
initialization and update of the index variable. In this form, the
prove pass can see that the body is dominated by an i < len condition,
and findIndVar can detect that i is an induction variable and that
0 <= i < len.
GOEXPERIMENT=preemptibleloops compiles range loops to OFORUNTIL and
we're preparing to unconditionally switch to a variation of this for
#24543. OFORUNTIL moves the increment and condition *after* the body,
which makes the bounds on the index variable much less obvious. With
OFORUNTIL, proving anything about the index variable requires
understanding the phi that joins the index values at the top of the
loop body block.
This interferes with both prove's ability to see that i < len (this is
true on both paths that enter the body, but from two different
conditional checks) and with findIndVar's ability to detect the
induction pattern.
Fix this by teaching prove to detect that the index in the pattern
constructed by OFORUNTIL is an induction variable and add both bounds
to the facts table. Currently this is done separately from findIndVar
because it depends on prove's factsTable, while findIndVar runs before
visiting blocks and building the factsTable.
Without any GOEXPERIMENT, this has no effect on std or cmd. However,
with GOEXPERIMENT=preemptibleloops, this change becomes necessary to
prove 90 conditions in std and cmd.
Change-Id: Ic025d669f81b53426309da5a6e8010e5ccaf4f49
Reviewed-on: https://go-review.googlesource.com/102603
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Currently, the prove pass derives implicit relations between len and
cap in the code that adds branch conditions. This is fine right now
because that's the only place we can encounter len and cap, but we're
about to add a second way to add assertions to the facts table that
can also produce facts involving len and cap.
Prepare for this by moving the fact derivation from updateRestrictions
(where it only applies on branches) to factsTable.update, which can
derive these facts no matter where the root facts come from.
Passes toolstash -cmp.
Change-Id: If09692d9eb98ffaa93f4cfa58ed2d8ba0887c111
Reviewed-on: https://go-review.googlesource.com/102602
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Currently, we never add a relation between two constants to prove's
fact table because these are eliminated before prove runs, so it
currently doesn't handle facts like this very well even though they're
easy to prove.
We're about to start asserting some conditions that don't appear in
the SSA, but are constructed from existing SSA values that may both be
constants.
Hence, improve the fact table to understand relations between
constants by initializing the constant bounds of constant values to
the value itself, rather than noLimit.
Passes toolstash -cmp.
Change-Id: I71f8dc294e59f19433feab1c10b6d3c99b7f1e26
Reviewed-on: https://go-review.googlesource.com/102601
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Inlining was refactored to perform tuning experiments,
with the "knobs" now set to also inline functions/methods
that include panic(), and -l=4 (inline calls) now expressed
as a change to costs, rather than scattered if-thens.
The -l=4 inline-calls penalty is chosen to be the best
found during experiments; it makes some programs much
larger and slower (notably, the compiler itself) and is
believed to be risky for machine-generated code in general,
which is why it is not the default. It is also not
well-tested with the debugger and DWARF output.
This change includes an explicit go:noinline applied to the
method that is the largest cause of compiler binary growth
and slowdown for midstack inlining; there are others,
ideally whatever heuristic eventually appears will make
this unnecessary.
Change-Id: Idf7056ed2f961472cf49d2fd154ee98bef9421e2
Reviewed-on: https://go-review.googlesource.com/109918
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This change brings back the EKU checking from 1.9. In 1.10, we checked
EKU nesting independent of the requested EKUs so that, after verifying a
certifciate, one could inspect the EKUs in the leaf and trust them.
That, however, was too optimistic. I had misunderstood that the PKI was
/currently/ clean enough to require that, rather than it being
desirable. Go generally does not push the envelope on these sorts of
things and lets the browsers clear the path first.
Fixes#24590
Change-Id: I18c070478e3bbb6468800ae461c207af9e954949
Reviewed-on: https://go-review.googlesource.com/113475
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Now that raise on darwin targets the current thread, we can remove
the workaround in dieFromSignal.
Change-Id: I1e468dc05e49403ee0bbe0a3a85e764c81fec4f2
Reviewed-on: https://go-review.googlesource.com/110476
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL is the darwin/arm and darwin/arm64 equivalent to CL 108679,
110215, 110437, 110438, 111258, 110655.
Updates #17490
Change-Id: Ia95b27b38f9c3535012c566f17a44b4ed26b9db6
Reviewed-on: https://go-review.googlesource.com/111015
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
pthread_self and pthread_kill are not safe to call from a signal
handler. In particular, pthread_self fails in iOS when called from
a signal handler context.
Use raise instead; it is signal handler safe and simpler.
Change-Id: I0cbfe25151aed245f55d7b76719ce06dc78c6a75
Reviewed-on: https://go-review.googlesource.com/113877
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
When an object spans heap arenas, its bitmap is discontiguous, so
heapBitsSetType unrolls the bitmap into the object itself and then
copies it out to the real heap bitmap. Unfortunately, since this code
path is rare, it had two unnoticed bugs related to the head and tail
of the bitmap:
1. At the head of the object, we were using hbitp as the destination
bitmap pointer rather than h.bitp, but hbitp points into the
*temporary* bitmap space (that is, the object itself), so we were
failing to copy the partial bitmap byte at the head of an object.
2. The core copying loop copied all of the full bitmap bytes, but
always drove the remaining word count down to 0, even if there was a
partial bitmap byte for the tail of the object. As a result, we never
wrote partial bitmap bytes at the tail of an object.
I found these by enabling out-of-place unrolling all the time. To
improve our chances of detecting these sorts of bugs in the future,
this CL mimics this by enabling out-of-place mode 50% of the time when
doubleCheck is enabled so that we test both in-place and out-of-place
mode.
Change-Id: I69e5d829fb3444be4cf11f4c6d8462c26dc467e8
Reviewed-on: https://go-review.googlesource.com/110995
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
We have a workaround in place in the runtime (see CL 16853 and
CL 111176) to keep arm and arm64 Go binaries working under QEMU
in user-emulation mode (Issue #13024).
This change adds a regression test about arm/arm64 QEMU emulation
to cmd/go.
Change-Id: Ic67f476e7c30a7d7852d9b01834f1dcabfac2ff7
Reviewed-on: https://go-review.googlesource.com/111477
Reviewed-by: Ian Lance Taylor <iant@golang.org>
First, the regions sort was buggy, as its last comparison was
ineffective.
Second, the insyscall and insyscallRuntime fields were unsigned, so the
check for them being negative was pointless. Make them signed instead,
to also prevent the possibility of underflows when decreasing numbers
that might realistically be 0.
Third, the color constants were all untyped strings except the first
one. Be consistent with their typing.
Change-Id: I4eb8d08028ed92589493c2a4b9cc5a88d83f769b
Reviewed-on: https://go-review.googlesource.com/113895
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The function signatures in the comments used a C-like style. Using
Go function signatures is cleaner.
Change-Id: I1a093ed8fe5df59f3697c613cf3fce58bba4f5c1
Reviewed-on: https://go-review.googlesource.com/113876
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Use the math/bits functions to calculate the number of leading/
trailing zeros, bit length and the population count.
The math/bits package is built as part of the bootstrap process
so we do not need to provide an alternative implementation for
Go versions prior to 1.9.
Passes toolstash-check -all.
Change-Id: I393b4cc1c8accd0ca7cb3599d3926fa6319b574f
Reviewed-on: https://go-review.googlesource.com/113336
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Use mach_absolute_time and mach_timebase_info to get nanosecond-level
timing information from libc on Darwin.
The conversion code from Apple's arbitrary time unit to nanoseconds is
really annoying. It would be nice if we could replace the internal
runtime "time" with arbitrary units and put the conversion to nanoseconds
only in the places that really need it (so it isn't in every nanotime call).
It's especially annoying because numer==denom==1 for all the machines
I tried. Makes it hard to test the conversion code :(
Update #17490
Change-Id: I6c5d602a802f5c24e35184e33d5e8194aa7afa86
Reviewed-on: https://go-review.googlesource.com/110655
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
A few libc_ calls were missing stack switches.
Unfortunately, adding the stack switches revealed a deeper problem.
systemstack() is fundamentally flawed because when you do
systemstack(func() { ... })
There's no way to mark the anonymous function as nosplit. At first I
thought it didn't matter, as that function runs on the g0 stack. But
nosplit is still required, because some syscalls are done when stack
bounds are not set up correctly (e.g. in a signal handler, which runs
on the g0 stack, but g is still pointing at the g stack). Instead use
asmcgocall and funcPC, so we can be nosplit all the way down.
Mid-stack inlining now pushes darwin over the nosplit limit also.
Leaving that as a TODO.
Update #23168
This might fix the cause of occasional darwin hangs.
Update #25181
Update #17490
Change-Id: If9c3ef052822c7679f5a1dd192443f714483327e
Reviewed-on: https://go-review.googlesource.com/111258
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This parses the import table properly which allows for debug/pe
to extract import symbols from pecoffs linked with an import
table in a section named something other than ".idata"
The section names in a pecoff object aren't guaranteed to actually
mean anything, so hardcoding a search for the ".idata" section
is not guaranteed to find the import table in all shared libraries.
This resulted in debug/pe being unable to read import symbols
from some libraries.
The proper way to locate the import table is to validate the
number of data directory entries, locate the import entry, and
then use the va to identify the section containing the import
table. This patch does exactly this.
Fixes#16103.
Change-Id: I3ab6de7f896a0c56bb86c3863e504e8dd4c8faf3
GitHub-Last-Rev: ce8077cb15
GitHub-Pull-Request: golang/go#25193
Reviewed-on: https://go-review.googlesource.com/110555
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
There's a glitch in how attributes from procs that do not
generate code are combined, and the workaround for this
glitch appeared in two places.
"One big pile is better than two little ones."
Updates #25426.
Change-Id: I252f9adc5b77591720a61fa22e6f9dda33d95350
Reviewed-on: https://go-review.googlesource.com/113717
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This commit improves wasm_exec.js to give more control to the
code that uses this helper:
- Allow to load and run more than one Go program at the same time.
- Move WebAssembly.instantiate out of wasm_exec.js so the caller
can optimize for load-time performance, e.g. by using
instantiateStreaming.
- Allow caller to provide argv, env and exit callback.
Updates #18892
Change-Id: Ib582e6f43848c0118ea5c89f2e24b371c45c2050
Reviewed-on: https://go-review.googlesource.com/113515
Reviewed-by: Agniva De Sarker <agniva.quicksilver@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This prevents a crash in go/types due to a nil condition in an 'if'
statement. There's more we can do to make go/types more robust but
this will address the immediate cause and also makes sure that the
parser returns a valid AST in this case.
Fixes#25438.
Change-Id: Ie55dc2c722352a5ecb17af6a16983741e8a8b515
Reviewed-on: https://go-review.googlesource.com/113735
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Dominik Honnef <dominik@honnef.co>
Reviewed-by: Alan Donovan <adonovan@google.com>
The check has worked this way for a long time, but it has never been
well documented.
For #25453.
Change-Id: If603e53348ba51f73b2f449b943c6f97f64aa3eb
Reviewed-on: https://go-review.googlesource.com/113755
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Without this running go vet -compiler=gccgo causes vet to fail.
The vet tool does need to know the compiler, but it is passed in
vetConfig.Compiler.
Change-Id: If857be4f336f6d7c425972fabcf82fae2cdc8a90
Reviewed-on: https://go-review.googlesource.com/113715
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
ASN.1 has an private class, but current implementation does not support it.
Change-Id: I3ebf07a048831869572f75223cb17d4c115caef7
GitHub-Last-Rev: b3c69ad091
GitHub-Pull-Request: golang/go#25195
Reviewed-on: https://go-review.googlesource.com/110561
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
If go toolchain is not built with GOEXPERIMENT=fieldtrack,
skip fieldtrack pass in the linker as it does full symtab traversal.
For linking "hello world" example from net/http:
name old time/op new time/op delta
Linker-4 530ms ± 2% 525ms ± 2% -1.03% (p=0.028 n=17+19)
Fixes#20318
Updates #14624
Change-Id: I99336513db77d13f95f47d27339d76f01c42a5da
Reviewed-on: https://go-review.googlesource.com/113635
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 113095 tried to deflake net tests on iOS by skipping the test
that uses the most sockets. That didn't work well enough and will
be reverted in CL 113555.
The flakes appeared after the iOS exec harness started to forward
environment variables, causing testenv.Builder to be non-empty on
the iOS builder. This CL attempts to fix the flakes with the more
conservative strategy of skipping tests that only run on builders.
The skipped tests happen to be those requiring external network
access; it's plausible that the iOS builder network isn't reliable
enough to run the many parallel DNS lookups and dial outs, while
keeping the number of open file descriptors below the 250 limit.
Change-Id: I9cafdaf2845dd6f3844c4819dcaaaa5970f5da15
Reviewed-on: https://go-review.googlesource.com/113575
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This reverts commit 3027932ac3.
Reason for revert: It didn't work well enough; a replacement CL that skips external net tests altogether on iOS is coming.
Change-Id: Ib2c5656cee92bcae744f9c99fbcb9f9f2baa0694
Reviewed-on: https://go-review.googlesource.com/113555
Run-TryBot: Elias Naur <elias.naur@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The file is not used ('go tool' uses cmd/pprof/pprof.go instead)
and the external package import in this file causes test failure.
Fixes#25367
Change-Id: I71fbf8a3631efb1bd9e459b8247e5f7a6683894c
Reviewed-on: https://go-review.googlesource.com/113295
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds functionality to properly handle NoPadding in NewDecoder.
Removes the following expectations when using NoPadding:
* the input message length is a multiple of 8
* the input message length is 0, or longer than 7 characters
Fixes#25332
Change-Id: I7c38160df23f7e8da4f85a5629530016e7bf71f3
GitHub-Last-Rev: 68ab8d2291
GitHub-Pull-Request: golang/go#25394
Reviewed-on: https://go-review.googlesource.com/113215
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
So we can have builders running go test -short=false.
Updates golang/go#12508
Change-Id: If90f0f6d9f89268c33b1d1876139ad551fecd3d8
Reviewed-on: https://go-review.googlesource.com/113435
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This block of code once was commented by the original author, but commenting
code looks a little annoying. However, the debugSelect flag is just for the
situation that debug code will be compiled when debuging, when release this
code will be eliminated by the compiler.
Change-Id: I7b94297e368b515116ef44a36058214ddddf9adb
Reviewed-on: https://go-review.googlesource.com/113395
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
After CL 113016 the "a" article is no longer necessary.
Change-Id: I5a80a210bd2b9eedd73d5f9f3f338d7f22c29ea6
Reviewed-on: https://go-review.googlesource.com/113355
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When a variable of type int is compared with sizeof's return
value, gcc warns:
comparison between signed and unsigned integer expressions
Change the type of a couple loop indices that looped over sizeof from
int to size_t to silence the warnings.
Fixes#25411
Change-Id: I2c7858f84237e77945651c7b1b6a75b97edcef65
Reviewed-on: https://go-review.googlesource.com/113335
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Before:
unexpected at 2721:load with unexpected source op v3278unexpected at 2775:load with
unexpected source op v3281unexpected at 2249:load with unexpected source op
v3289unexpected at 2875:load with unexpected source op v3278unexpected at 2232:load
with unexpected source op v286unexpected at 2231:load with unexpected source op
v3291unexpected at 2784:load with unexpected source op v3289unexpected at 2785:load
with unexpected source op v3291
After:
debug info generation: v2721: load with unexpected source op: Phi (v3278)
debug info generation: v2775: load with unexpected source op: Phi (v3281)
debug info generation: v2249: load with unexpected source op: Phi (v3289)
debug info generation: v2875: load with unexpected source op: Phi (v3278)
debug info generation: v2232: load with unexpected source op: Phi (v286)
debug info generation: v2231: load with unexpected source op: Phi (v3291)
debug info generation: v2784: load with unexpected source op: Phi (v3289)
debug info generation: v2785: load with unexpected source op: Phi (v3291)
Updates #25404.
Change-Id: Ib97722848d27ca18bdcd482a610626bc3c6def7d
Reviewed-on: https://go-review.googlesource.com/113275
Run-TryBot: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change updates the vendored copy of golang.org/x/crypto to
commit 1a580b3eff7814fc9b40602fd35256c63b50f491.
An import of golang.org/x/sys/cpu was replaced with an import of
internal/cpu as required by
https://github.com/golang/go/issues/24843#issuecomment-383194779.
The following bash command can be used to replicate this import
update:
find `pwd` -name '*.go' -exec sed -i 's/golang\.org\/x\/sys\/cpu/internal\/cpu/g' '{}' \;
Change-Id: Ic80d361f940a96c70e4196f594d791c63421d73c
Reviewed-on: https://go-review.googlesource.com/113175
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The preallocated memory size is comparable to bytes.Buffer bootstraping
array length (bytes.Buffer was used before rewrite to strings.Builder).
Without preallocation, encodeWord does more than one allocation for
almost any possible input.
The regression happens because bytes.Buffer did a 80-bytes allocation
at the beginning of encodeWord while strings.Builder did several
smaller allocations (started with cap=0).
Comparison with reported regression:
name old time/op new time/op delta
QEncodeWord-4 781ns ± 1% 593ns ± 1% -24.08% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
QEncodeWord-4 152B ± 0% 80B ± 0% -47.37% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
QEncodeWord-4 5.00 ± 0% 2.00 ± 0% -60.00% (p=0.008 n=5+5)
Comparison with buffer solution (like before strings.Builder, but
without sync pool for buffer re-using):
name old time/op new time/op delta
QEncodeWord-4 595ns ± 1% 593ns ± 1% ~ (p=0.460 n=5+5)
name old alloc/op new alloc/op delta
QEncodeWord-4 160B ± 0% 80B ± 0% -50.00% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
QEncodeWord-4 2.00 ± 0% 2.00 ± 0% ~ (all equal)
We avoid allocation in buf.String(), as expected.
Fixes#25379
Change-Id: I19763f0e593a27390c1a549b86ce6507b489046b
Reviewed-on: https://go-review.googlesource.com/113235
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
