Special case for rewriting OAS inits omitted OASWB, added
that and OAS2FUNC. The special case cannot be default case,
that causes racewalk to fail in horrible ways.
Fixes#16008.
Change-Id: Ie0d2f5735fe9d8255a109597b36d196d4f86703a
Reviewed-on: https://go-review.googlesource.com/23954
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The generated code for interface stubs sometimes just messes
with a few of the args and then tail-calls to the target routine.
The args that aren't explicitly modified appear to not be used.
But they are used, by the thing we're tail calling.
Fixes#16016
Change-Id: Ib9b3a8311bb714a201daee002885fcb59e0463fa
Reviewed-on: https://go-review.googlesource.com/23960
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This matches the behavior of the legacy backend.
Fixes#15975 (if this is the intended behavior)
Change-Id: Id277959069b8b8bf9958fa8f2cbc762c752a1a19
Reviewed-on: https://go-review.googlesource.com/23820
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Post-liveness fix, the slices on both sides can now be
indirects of & variables. The cgen code handles those
cases just fine.
Fixes#15988
Change-Id: I378ad1d5121587e6107a9879c167291a70bbb9e4
Reviewed-on: https://go-review.googlesource.com/23863
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Make sure auto names don't conflict with function names. Before this CL,
we confused name a.len (the len field of the slice a) with a.len (the function
len declared on a).
Fixes#15961
Change-Id: I14913de697b521fb35db9a1b10ba201f25d552bb
Reviewed-on: https://go-review.googlesource.com/23789
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adding a .def suffix for DWARF info collided with the DWARF info,
without the suffix, for a method named def. Change the suffix to ..def
instead.
Fixes#15926.
Change-Id: If1bf1bcb5dff1d7f7b79f78e3f7a3bbfcd2201bb
Reviewed-on: https://go-review.googlesource.com/23733
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
If memory might be unaligned, zero it one byte at a time
instead of 4 bytes at a time.
Fixes#15902
Change-Id: I4eff0840e042e2f137c1a4028f08793eb7dfd703
Reviewed-on: https://go-review.googlesource.com/23587
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Some of these errors are reported in the wrong places.
That’s issue #15911 and #15912.
Change-Id: Ia09d7f89be4d15f05217a542a61b6ac08090dd87
Reviewed-on: https://go-review.googlesource.com/23588
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The liveness computation of parameters generally was never
correct, but forcing all parameters to be live throughout the
function covered up that problem. The new SSA back end is
too clever: even though it currently keeps the parameter values live
throughout the function, it may find optimizations that mean
the current values are not written back to the original parameter
stack slots immediately or ever (for example if a parameter is set
to nil, SSA constant propagation may replace all later uses of the
parameter with a constant nil, eliminating the need to write the nil
value back to the stack slot), so the liveness code must now
track the actual operations on the stack slots, exposing these
problems.
One small problem in the handling of arguments is that nodarg
can return ONAME PPARAM nodes with adjusted offsets, so that
there are actually multiple *Node pointers for the same parameter
in the instruction stream. This might be possible to correct, but
not in this CL. For now, we fix this by using n.Orig instead of n
when considering PPARAM and PPARAMOUT nodes.
The major problem in the handling of arguments is general
confusion in the liveness code about the meaning of PPARAM|PHEAP
and PPARAMOUT|PHEAP nodes, especially as contrasted with PAUTO|PHEAP.
The difference between these two is that when a local variable "moves"
to the heap, it's really just allocated there to start with; in contrast,
when an argument moves to the heap, the actual data has to be copied
there from the stack at the beginning of the function, and when a
result "moves" to the heap the value in the heap has to be copied
back to the stack when the function returns
This general confusion is also present in the SSA back end.
The PHEAP bit worked decently when I first introduced it 7 years ago (!)
in 391425ae. The back end did nothing sophisticated, and in particular
there was no analysis at all: no escape analysis, no liveness analysis,
and certainly no SSA back end. But the complications caused in the
various downstream consumers suggest that this should be a detail
kept mainly in the front end.
This CL therefore eliminates both the PHEAP bit and even the idea of
"heap variables" from the back ends.
First, it replaces the PPARAM|PHEAP, PPARAMOUT|PHEAP, and PAUTO|PHEAP
variable classes with the single PAUTOHEAP, a pseudo-class indicating
a variable maintained on the heap and available by indirecting a
local variable kept on the stack (a plain PAUTO).
Second, walkexpr replaces all references to PAUTOHEAP variables
with indirections of the corresponding PAUTO variable.
The back ends and the liveness code now just see plain indirected
variables. This may actually produce better code, but the real goal
here is to eliminate these little-used and somewhat suspect code
paths in the back end analyses.
The OPARAM node type goes away too.
A followup CL will do the same to PPARAMREF. I'm not sure that
the back ends (SSA in particular) are handling those right either,
and with the framework established in this CL that change is trivial
and the result clearly more correct.
Fixes#15747.
Change-Id: I2770b1ce3cbc93981bfc7166be66a9da12013d74
Reviewed-on: https://go-review.googlesource.com/23393
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The importer had several bugs with respect to labels and gotos:
- it didn't create a new ONAME node for label names (label dcl,
goto, continue, and break)
- it overwrote the symbol for gotos with the dclstack
- it didn't set the dclstack for labels
In the process changed export format slightly to always assume
a label name for labels and gotos, and never assume a label for
fallthroughs.
For fallthroughs and switch cases, now also set Xoffset like in
the parser. (Not setting it, i.e., using 0 was ok since this is
only used for verifying correct use of fallthroughs, which was
checked already. But it's an extra level of verification of the
import.)
Fixes#15838.
Change-Id: I3637f6314b8651c918df0c8cd70cd858c92bd483
Reviewed-on: https://go-review.googlesource.com/23445
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 21462 and CL 21463 made this message say explicitly that the problem
was a struct field in a map, but the word "directly" is unnecessary,
sounds wrong, and makes the error long.
Change-Id: I2fb68cdaeb8bd94776b8022cf3eae751919ccf6f
Reviewed-on: https://go-review.googlesource.com/23373
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Non-syntax errors are always counted to determine if to exit
early, but then deduplication eliminates them. This can lead
to situations which report "too many errors" and only one
error is shown.
De-duplicate non-syntax errors early, at least the ones that
appear consecutively, and only count the ones actually being
shown. This doesn't work perfectly as they may not appear in
sequence, but it's cheap and good enough.
Fixes#14136.
Change-Id: I7b11ebb2e1e082f0d604b88e544fe5ba967af1d7
Reviewed-on: https://go-review.googlesource.com/23259
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
They get rewritten to NEWs, and they must be marked as escaping
so walk doesn't try to allocate them back onto the stack.
Fixes#15733
Change-Id: I433033e737c3de51a9e83a5a273168dbc9110b74
Reviewed-on: https://go-review.googlesource.com/23223
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run live vars test only on ssa builds.
We can't just drop KeepAlive ops during regalloc. We need
to replace them with copies.
Change-Id: Ib4b3b1381415db88fdc2165fc0a9541b73ad9759
Reviewed-on: https://go-review.googlesource.com/23225
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Introduce a KeepAlive op which makes sure that its argument is kept
live until the KeepAlive. Use KeepAlive to mark pointer input
arguments as live after each function call and at each return.
We do this change only for pointer arguments. Those are the
critical ones to handle because they might have finalizers.
Doing compound arguments (slices, structs, ...) is more complicated
because we would need to track field liveness individually (we do
that for auto variables now, but inputs requires extra trickery).
Turn off the automatic marking of args as live. That way, when args
are explicitly nulled, plive will know that the original argument is
dead.
The KeepAlive op will be the eventual implementation of
runtime.KeepAlive.
Fixes#15277
Change-Id: I5f223e65d99c9f8342c03fbb1512c4d363e903e5
Reviewed-on: https://go-review.googlesource.com/22365
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Previously statements like
f(unsafe.Pointer(g()), int(h()))
would be reordered into a sequence of statements like
autotmp_g := g()
autotmp_h := h()
f(unsafe.Pointer(autotmp_g), int(autotmp_h))
which can leave g's temporary value on the stack as a uintptr, rather
than an unsafe.Pointer. Instead, recognize uintptr-to-unsafe.Pointer
conversions when reordering function calls to instead produce:
autotmp_g := unsafe.Pointer(g())
autotmp_h := h()
f(autotmp_g, int(autotmp_h))
Fixes#15329.
Change-Id: I2cdbd89d233d0d5c94791513a9fd5fd958d11ed5
Reviewed-on: https://go-review.googlesource.com/22273
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
See #15604. This was a bug in a CL that has since been
rolled back. Adding a test to challenge the next attempter.
Change-Id: Ic43be254ea6eaab0071018cdc61d9b1c21f19cbf
Reviewed-on: https://go-review.googlesource.com/23000
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In regalloc, a sparse map is preallocated for later use by
spill-in-loop sinking. However, variables (spills) are added
during register allocation before spill sinking, and a map
query involving any of these new variables will index out of
bounds in the map.
To fix:
1) fix the queries to use s.orig[v.ID].ID instead, to ensure
proper indexing. Note that s.orig will be nil for values
that are not eligible for spilling (like memory and flags).
2) add a test.
Fixes#15585.
Change-Id: I8f2caa93b132a0f2a9161d2178320d5550583075
Reviewed-on: https://go-review.googlesource.com/22911
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This flag is experimental and the semantics may change
even after Go 1.7 is released. There are no changes to code
not using the flag.
The first part is for reading by future compiles.
The second part is for reading by the final link step.
Splitting the file this way allows distributed build systems
to ship the compile-input part only to compile steps and
the linker-input part only to linker steps.
The first part is basically just the export data,
and the second part is basically everything else.
The overall files still have the same broad structure,
so that existing tools will work with both halves.
It's just that various pieces are empty in the two halves.
This also copies the two bits of data the linker needed from
export data into the object header proper, so that the linker
doesn't need any export data at all. That eliminates a TODO
that was left for switching to the binary export data.
(Now the linker doesn't need to know about the switch.)
The default is still to write out a combined output file.
Nothing changes unless you pass -linkobj to the compiler.
There is no support in the go command for -linkobj,
since the go command doesn't copy objects around.
The expectation is that other build systems (like bazel, say)
might take advantage of this.
The header adjustment and the option for the split output
was intended as part of the zip archives, but the zip archives
have been cut from Go 1.7. Doing this to the current archives
both unblocks one step in the switch to binary export data
and enables alternate build systems to experiment with the
new flag using the Go 1.7 release.
Change-Id: I8b6eab25b8a22b0a266ba0ac6d31e594f3d117f3
Reviewed-on: https://go-review.googlesource.com/22500
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The problem was fixed by the rollback in CL 22930.
This CL just adds a test to prevent regressions.
Fixes#15602
Change-Id: I37453f6e18ca43081266fe7f154c6d63fbaffd9b
Reviewed-on: https://go-review.googlesource.com/22931
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The new export format keeps track of all types that are exported.
If a type is seen that was exported before, only a reference to
that type is emitted. The importer maintains a list of all the
seen types and uses that list to resolve type references.
The existing compiler infrastructure's invariants assumes that
only named types are referred to before they are fully set up.
Referring to unnamed incomplete types causes problems. One of
the issues was #15548.
Added a new internal flag 'trackAllTypes' to enable/disable
this type tracking. With this change only named types are
tracked.
Verified that this fix also addresses #15548, even w/o the
prior fix for that issue (in fact that prior fix is turned
off if trackAllTypes is disabled because it's not needed).
The test for #15548 covers also this change.
For #15548.
Change-Id: Id0b3ff983629703d025a442823f99649fd728a56
Reviewed-on: https://go-review.googlesource.com/22839
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The boolean destination in an OAS2DOTTYPE expression craps out during
compilation when trying to assign to a map entry because, unlike slice entries,
map entries are not directly addressable in memory. The solution is to
properly order the boolean destination node so that map entries are set
via autotmp variables.
Fixes#14678
Change-Id: If344e8f232b5bdac1b53c0f0d21eeb43ab17d3de
Reviewed-on: https://go-review.googlesource.com/22833
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Accidentally checked in the version of file c.go that doesn't
exhibit the bug - hence the test was not testing the bug fix.
Double-checked that this version exposes the bug w/o the fix.
Change-Id: Ie4dc455229d1ac802a80164b5d549c2ad4d971f5
Reviewed-on: https://go-review.googlesource.com/22837
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
external linking is now supported.
Change-Id: I13e90c39dad86e60781adecdbe8e6bc9e522f740
Reviewed-on: https://go-review.googlesource.com/19811
Reviewed-by: Minux Ma <minux@golang.org>
This is necessary to avoid disrupting the go1 suite and gives
us a place to put other tests of basic compiler function and
correctness.
Change-Id: I36933819ff2bfe6a2121fff2be9a98efd2123d9a
Reviewed-on: https://go-review.googlesource.com/22597
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The underlying issues have been fixed.
All the individual fixes have their own tests,
but it's still useful to have a plain source test.
Fixes#15084
Change-Id: I06c485a7d0716201bd57d1f3be53668dddd7ec14
Reviewed-on: https://go-review.googlesource.com/22426
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This is a follow-up to CLs 19769 and 19770.
Change-Id: Ia9b71055613b80df4ce62b34fcc4f479f04f72fd
Reviewed-on: https://go-review.googlesource.com/22399
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
func f(x, y, z *int) {
a := []*int{x,y,z}
...
}
We used to use:
var tmp [3]*int
a := tmp[:]
a[0] = x
a[1] = y
a[2] = z
Now we do:
var tmp [3]*int
tmp[0] = x
tmp[1] = y
tmp[2] = z
a := tmp[:]
Doesn't sound like a big deal, but the compiler has trouble
eliminating write barriers when using the former method because it
doesn't know that the slice points to the stack. In the latter
method, the compiler knows the array is on the stack and as a result
doesn't emit any write barriers.
This turns out to be extremely common when building ... args, like
for calls fmt.Printf.
Makes go binaries ~1% smaller.
Doesn't have a measurable effect on the go1 fmt benchmarks,
unfortunately.
Fixes#14263
Update #6853
Change-Id: I9074a2788ec9e561a75f3b71c119b69f304d6ba2
Reviewed-on: https://go-review.googlesource.com/22395
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
See discussion at [1]. True value must have a fixed non-zero
representation meaning that a && b can be implemented as a & b.
[1] https://groups.google.com/forum/#!topic/golang-dev/xV0vPuFP9Vg
This change helps with m := a && b, but it's more common to see
if a && b { do something } which is not handled.
Change-Id: Ib6f9ff898a0a8c05d12466e2464e4fe781035394
Reviewed-on: https://go-review.googlesource.com/22313
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
They are guaranteed to be non-nil, no point in inserting
nil checks for them.
Fixes#15390
Change-Id: I3b9a0f2319affc2139dcc446d0a56c6785ae5a86
Reviewed-on: https://go-review.googlesource.com/22291
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
func f(a, b bool) bool {
return a || b
}
is now a single instructions (excluding loading and unloading the arguments):
v10 = ORB <bool> v11 v12 : AX
Change-Id: Iff63399410cb46909f4318ea1c3f45a029f4aa5e
Reviewed-on: https://go-review.googlesource.com/21872
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The result of ODOTPTR, as well as a bunch of other ops,
should be the type of the result, not always a pointer type.
This fixes an amd64p32 bug where we were incorrectly truncating
a 64-bit slice index to 32 bits, and then barfing on a weird
load-64-bits-but-then-truncate-to-32-bits op that doesn't exist.
Fixes#15252
Change-Id: Ie62f4315fffd79f233e5449324ccc0879f5ac343
Reviewed-on: https://go-review.googlesource.com/22094
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Print numGC followed by numGC1, rather than printing numGC twice.
Change-Id: I8e7144b6a11d4ae9be0d82d88b86fed04b906e2f
Reviewed-on: https://go-review.googlesource.com/22087
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Map keys are currently validated in multiple locations but share
a common validation routine. The problem is that early validations
should be lenient enough to allow for forward types while the final
validations should not. The final validations should fail on forward
types since they've already settled.
This change also separates the key type checking from the creation
of the map via typMap. Instead of the mapqueue being populated in
copytype() by checking the map line number, it's populated in the
same block that validates the key type. This isolates key validation
logic while type checking.
Fixes#14988
Change-Id: Ia47cf6213585d6c63b3a35249104c0439feae658
Reviewed-on: https://go-review.googlesource.com/21830
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
