When either the server or client are lacking hardware support for
AES-GCM ciphers, indicated by the server lacking the relevant
instructions and by the client not putting AES-GCM ciphers at the top
of its preference list, reorder the preference list to de-prioritize
AES-GCM based ciphers when they are adjacent to other AEAD ciphers.
Also updates a number of recorded openssl TLS tests which previously
only specified TLS 1.2 cipher preferences (using -cipher), but not
TLS 1.3 cipher preferences (using -ciphersuites), to specify both
preferences, making these tests more predictable.
Fixes#41181.
Change-Id: Ied896c96c095481e755aaff9ff0746fb4cb9568e
Reviewed-on: https://go-review.googlesource.com/c/go/+/262857
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Trust: Katie Hockman <katie@golang.org>
This is a SHALL in RFC 7301, Section 3.2.
Also some more cleanup after NPN, which worked the other way around
(with the possibility that the client could pick a protocol the server
did not suggest).
Change-Id: I83cc43ca1b3c686dfece8315436441c077065d82
Reviewed-on: https://go-review.googlesource.com/c/go/+/239748
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Filippo Valsorda <filippo@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Reviewed-by: Roland Shoemaker <roland@golang.org>
Adds the (*tls.Conn).HandshakeContext method. This allows
us to pass the context provided down the call stack to
eventually reach the tls.ClientHelloInfo and
tls.CertificateRequestInfo structs.
These contexts are exposed to the user as read-only via Context()
methods.
This allows users of (*tls.Config).GetCertificate and
(*tls.Config).GetClientCertificate to use the context for
request scoped parameters and cancellation.
Replace uses of (*tls.Conn).Handshake with (*tls.Conn).HandshakeContext
where appropriate, to propagate existing contexts.
Fixes#32406
Change-Id: I33c228904fe82dcf57683b63627497d3eb841ff2
Reviewed-on: https://go-review.googlesource.com/c/go/+/246338
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
build, install, and test will now print deprecation messages when the
-i flag is used. clean will continue to support -i.
For #41696
Change-Id: I956c235c487a872c5e6c1395388b4d6cd5ef817a
Reviewed-on: https://go-review.googlesource.com/c/go/+/266368
Trust: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
For #40276
Change-Id: I5e631a4c9ce07f23640fb56eb455457bc55072c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/266360
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This change also documents the need to set a Deadline before
calling Read or Write.
Fixes#31224
Change-Id: I89d6fe3ecb0a0076b4c61765f61c88056f951406
Reviewed-on: https://go-review.googlesource.com/c/go/+/266037
Trust: Katie Hockman <katie@golang.org>
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Previously, we resolved each argument to 'go get' to a package path or
module path based on what was in the build list at existing versions,
even if the argument specified a different version explicitly. That
resulted in bugs like #37438, in which we variously resolved the wrong
version or guessed the wrong argument type for what is unambiguously a
package argument at the requested version.
We were also using a two-step upgrade/downgrade algorithm, which could
not only upgrade more that is strictly necessary, but could also
unintentionally upgrade *above* the requested versions during the
downgrade step.
This change instead uses an iterative approach, with an explicit
disambiguation step for the (rare) cases where an argument could match
the same package path in multiple modules. We use a hook in the
package loader to halt package loading as soon as an incorrect version
is found — preventing over-resolving — and verify that the result
after applying downgrades successfully obtained the requested versions
of all modules.
Making 'go get' be correct and usable is especially important now that
we are defaulting to read-only mode (#40728), for which we are
recommending 'go get' more heavily.
While I'm in here refactoring, I'm also reworking the API boundary
between the modget and modload packages. Previously, the modget
package edited the build list directly, and the modload package
accepted the edited build list without validation. For lazy loading
(#36460), the modload package will need to maintain additional
metadata about the requirement graph, so it needs tighter control over
the changes to the build list.
As of this change, modget no longer invokes MVS directly, but instead
goes through the modload package. The resulting API gives clearer
reasons in case of updates, which we can use to emit more useful
errors.
Fixes#37438
Updates #36460
Updates #40728
Change-Id: I596f0020f3795870dec258147e6fc26a3292c93a
Reviewed-on: https://go-review.googlesource.com/c/go/+/263267
Trust: Bryan C. Mills <bcmills@google.com>
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
In the current (pre-CL) version of the spec, the 2nd last shift
example appears to be using the array declared in the last example.
On a 32-bit platform, that array would have length 0, which would
lead to a panic in the 2nd last example. Also, if this code were
inside a function, it wouldn't compile (array declared after use).
Use an explicitly declared array for that specific shift example.
Also, split out all cases that produce different results for 32-
vs 64-bit ints.
Fixes#41835.
Change-Id: Ie45114224509e4999197226f91f7f6f934449abb
Reviewed-on: https://go-review.googlesource.com/c/go/+/260398
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts commit 8f26b57f9a.
Reason for revert: break a bunch of code, include standard library.
Fixes#42123
Change-Id: Ife90ecbafd2cb395623d1db555fbfc9c1b0098e0
Reviewed-on: https://go-review.googlesource.com/c/go/+/264026
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This corresponds to the feature in https://golang.org/cl/263542, since
this can be a noteworthy change to people writing tools to inspect Go
builds.
Also amend the wording to clarify that build IDs are for an entire
compiled package, not just their export data or object file.
Change-Id: I2eb295492807d5d2997a35e5e2371914cb3ad3a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/264158
Trust: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Change-Id: I89c61e444b3ab36f0081a5252d210cb265344122
Reviewed-on: https://go-review.googlesource.com/c/go/+/264157
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Trust: Alex Brainman <alex.brainman@gmail.com>
This way, a -toolexec tool can tell precisely what package is being
built when it's run. This was very hard to do before, because the tool
had to piece together that information given the build action's
arguments or flags.
Since there wasn't a good set of tests for -toolexec, add one in the
form of a test script. It builds a simple set of packages with a variety
of build tools, to ensure that all the cases behave as expected.
Like other recent master changes, include the changelog item for this
user-facing change too.
Fixes#15677.
Change-Id: I0a5a1d9485840323ec138b2e64b7e7dd803fdf90
Reviewed-on: https://go-review.googlesource.com/c/go/+/263357
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Trust: Daniel Martí <mvdan@mvdan.cc>
Fixes the check for the reserved namespace prefix
"xml" to be case insensitive, so as to match all variants of:
(('X'|'x')('M'|'m')('L'|'l'))
as mandated by Section 2.3 of https://www.w3.org/TR/REC-xml/
This is a roll forward of CL 203417, which was rolled back by CL 240179.
We've decided that the roll back was incorrect, and any broken tests
should be fixed.
The original CL 203417 was by Tamás Gulácsi.
Fixes#35151
For #39876
Change-Id: I2e6daa7aeb252531fba0b8a56086613e13059528
Reviewed-on: https://go-review.googlesource.com/c/go/+/264024
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
The other named errors - UnmarshalTypeError, etc - in this package do
the same, so we should prepend the package prefix to error messages
for consistency.
Add a note to the release docs in case this is interpreted as
a breaking change.
Fixes#36221.
Change-Id: Ie24b532bbf9812e108c259fa377e2a6b64319ed4
Reviewed-on: https://go-review.googlesource.com/c/go/+/263619
Run-TryBot: Kevin Burke <kev@inburke.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Kevin Burke <kev@inburke.com>
Trust: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Also put Reset in the correct place for the other
benchmarks.
name old time/op new time/op delta
NewWriteSum-8 1.01µs ± 0% 1.01µs ± 1% ~ (p=0.945 n=9+9)
name old speed new speed delta
NewWriteSum-8 31.7MB/s ± 0% 31.6MB/s ± 1% ~ (p=0.948 n=9+9)
name old alloc/op new alloc/op delta
NewWriteSum-8 544B ± 0% 544B ± 0% ~ (all equal)
name old allocs/op new allocs/op delta
NewWriteSum-8 7.00 ± 0% 7.00 ± 0% ~ (all equal)
Fixes#41089
Change-Id: I3dae660adbe4993963130bf3c2636bd53899164b
Reviewed-on: https://go-review.googlesource.com/c/go/+/261960
Trust: Katie Hockman <katie@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Roland Shoemaker <roland@golang.org>
Also fix BenchmarkAtof64Random* to initialize the test data when none
of the TestAtof* tests are run.
Passing "go test -test.count=5 -test.run=xxx -test.bench=Atof64" on to
benchstat:
name old time/op new time/op delta
Atof64Decimal-4 47.9ns ± 0% 48.3ns ± 1% ~ (p=0.238 n=4+5)
Atof64Float-4 58.3ns ± 3% 57.7ns ± 0% ~ (p=0.151 n=5+5)
Atof64FloatExp-4 107ns ± 0% 71ns ± 1% -33.89% (p=0.016 n=4+5)
Atof64Big-4 163ns ± 0% 166ns ± 2% ~ (p=0.159 n=4+5)
Atof64RandomBits-4 299ns ± 1% 166ns ± 1% -44.41% (p=0.008 n=5+5)
Atof64RandomFloats-4 188ns ± 1% 144ns ± 0% -23.03% (p=0.008 n=5+5)
The canada.json file from github.com/miloyip/nativejson-benchmark is
full of geospatial coordinates (i.e. numbers). With this program:
src, _ := ioutil.ReadFile("canada.json")
for i := 0; i < 5; i++ {
now := time.Now()
for j := 0; j < 10; j++ {
dst := interface{}(nil)
if err := json.Unmarshal(src, &dst); err != nil {
log.Fatal(err)
}
}
fmt.Println(time.Since(now))
}
Median of the 5 printed numbers, lower is better.
Before: 760.819549ms
After: 702.651646ms
Ratio: 1.08x
The new detailedPowersOfTen table weighs in at 596 * 16 = 9536 bytes,
but some of that weight gain can be clawed back, in a follow-up commit,
that folds in the existing powersOfTen table in extfloat.go.
RELNOTE=yes
Change-Id: I3953110deaa1f5f6941e88e8417c4665b649ed80
Reviewed-on: https://go-review.googlesource.com/c/go/+/260858
Run-TryBot: Nigel Tao <nigeltao@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Nigel Tao <nigeltao@golang.org>
This changes checks the signature generated during CreateCertificate
and returns an error if the verification fails. A benchmark is also
added. For RSA keys the delta looks to be insignificant, but for
ECDSA keys it introduces a much larger delta which is not ideal.
name old time/op new time/op delta
RSA_2048-8 1.38ms ± 6% 1.41ms ± 2% ~ (p=0.182 n=10)
ECDSA_P256-8 42.6µs ± 4% 116.8µs ± 4% +174.00% (p=0.000 n=1
Fixes#40458
Change-Id: I22827795bb9bb6868b4fa47391927db1d3bc19a1
Reviewed-on: https://go-review.googlesource.com/c/go/+/259697
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Trust: Emmanuel Odeke <emm.odeke@gmail.com>
Trust: Roland Shoemaker <roland@golang.org>
Setting inittrace=1 causes the runtime to emit a single line to standard error for
each package with init work, summarizing the execution time and memory allocation.
The emitted debug information for init functions can be used to find bottlenecks
or regressions in Go startup performance.
Packages with no init function work (user defined or compiler generated) are omitted.
Tracing plugin inits is not supported as they can execute concurrently. This would
make the implementation of tracing more complex while adding support for a very rare
use case. Plugin inits can be traced separately by testing a main package importing
the plugins package imports explicitly.
$ GODEBUG=inittrace=1 go test
init internal/bytealg @0.008 ms, 0 ms clock, 0 bytes, 0 allocs
init runtime @0.059 ms, 0.026 ms clock, 0 bytes, 0 allocs
init math @0.19 ms, 0.001 ms clock, 0 bytes, 0 allocs
init errors @0.22 ms, 0.004 ms clock, 0 bytes, 0 allocs
init strconv @0.24 ms, 0.002 ms clock, 32 bytes, 2 allocs
init sync @0.28 ms, 0.003 ms clock, 16 bytes, 1 allocs
init unicode @0.44 ms, 0.11 ms clock, 23328 bytes, 24 allocs
...
Inspired by stapelberg@google.com who instrumented doInit
in a prototype to measure init times with GDB.
Fixes#41378
Change-Id: Ic37c6a0cfc95488de9e737f5e346b8dbb39174e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/254659
Trust: Martin Möhrmann <moehrmann@google.com>
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Currently, mhdr/methods is emitted with the same len/cap. There's no way
to distinguish between exported and non-exported methods statically.
This CL splits mhdr/methods into two parts, use "len" for number of
exported methods, and "cap" for all methods. This fixes the bug in
issue #22075, which intends to return the number of exported methods but
currently return all methods.
Note that with this encoding, we still can access either
all/exported-only/non-exported-only methods:
mhdr[:cap(mhdr)] // all methods
mhdr // exported methods
mhdr[len(mhdr):cap(mhdr)] // non-exported methods
Thank to Matthew Dempsky (@mdempsky) for suggesting this encoding.
Fixes#22075
Change-Id: If662adb03ccff27407d55a5578a0ed05a15e7cdd
Reviewed-on: https://go-review.googlesource.com/c/go/+/259237
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The current specification does not foresee a SameSite attribute without
a value. While the existing implementation would serialize SameSite in a
way that would likely be ignored by well-impelemented clients, it is
better to not rely on this kind of quirks.
Specification: https://tools.ietf.org/html/draft-ietf-httpbis-rfc6265bis-05#section-4.1.1Fixes#36990
Change-Id: Ie51152741d7e84bab64d3e4e4f780286932acbde
Reviewed-on: https://go-review.googlesource.com/c/go/+/256498
Trust: Roberto Clapis <roberto@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Also add a few more TODOs as found by the relnote command.
It's an incomplete list due to #41849.
For #40700.
Change-Id: Id17a9be86d3338e1fcb281d26e7298ff26e92864
Reviewed-on: https://go-review.googlesource.com/c/go/+/260337
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
netbsd/arm64 now complies with all the requirements for a port as
specified on https://golang.org/wiki/PortingPolicy
Note that this was preliminarily announced in the Go 1.13 release notes
(CL 183637) but then removed again due to the port lacking a builder at
that time (CL 192997).
Updates #30824
Change-Id: I2f40fabc84fe9cb699282e6a9d13ed9b64478e36
Reviewed-on: https://go-review.googlesource.com/c/go/+/259277
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Extends the IA5String encoding restrictions that are currently applied
to name constraints to dNSName, rfc822Name, and
uniformResourceIdentifier elements of the SAN. The utility function
isIA5String is updated to use unicode.MaxASCII rather than utf8.RuneSelf
as it is somewhat more readable.
Certificates that include these badly encoded names do exist, but are
exceedingly rare. zlint and other linters enforce this encoding and
searching censys.io reveals only three currently trusted certificates
with this particular encoding issue.
Fixes#26362
Change-Id: I7a4f3e165a1754e5b4bfaeabc03e01eb7367f3c9
Reviewed-on: https://go-review.googlesource.com/c/go/+/235078
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Suggested by @yaxinlx.
Fixes#41612.
Change-Id: I98b9968a95d090ee3c67ff02678e1874e6d98c33
Reviewed-on: https://go-review.googlesource.com/c/go/+/257159
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Introduce GOOS=ios for iOS systems. GOOS=ios matches "darwin"
build tag, like GOOS=android matches "linux" and GOOS=illumos
matches "solaris". Only ios/arm64 is supported (ios/amd64 is
not).
GOOS=ios and GOOS=darwin remain essentially the same at this
point. They will diverge at later time, to differentiate macOS
and iOS.
Uses of GOOS=="darwin" are changed to (GOOS=="darwin" || GOOS=="ios"),
except if it clearly means macOS (e.g. GOOS=="darwin" && GOARCH=="amd64"),
it remains GOOS=="darwin".
Updates #38485.
Change-Id: I4faacdc1008f42434599efb3c3ad90763a83b67c
Reviewed-on: https://go-review.googlesource.com/c/go/+/254740
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The instructions have already been updated in greater
detail in "Step 2: Configure git authentication", but
the overview needs updated to reflect the new workflow.
Change-Id: I6f411a3dc500a9058036a4a828403c0153e4220a
Reviewed-on: https://go-review.googlesource.com/c/go/+/256857
Trust: Katie Hockman <katie@golang.org>
Run-TryBot: Katie Hockman <katie@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
This flag, like the -e flag to 'go list', instructs the command to
make a best effort to continue in spite of errors for specific packages.
Fixes#26603
Change-Id: I5ee2f50c71870ae8ef3f9b3e5b045474adcca525
Reviewed-on: https://go-review.googlesource.com/c/go/+/255960
Trust: Bryan C. Mills <bcmills@google.com>
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
The cgo tool would sometimes emit a bitfield at an offset that did not
correspond to the C offset, such as for the example in the new test.
Change-Id: I61b2ca10ee44a42f81c13ed12865f2060168fed5
Reviewed-on: https://go-review.googlesource.com/c/go/+/252378
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
With this change, 'go install' will install executables in module mode
without using or modifying the module in the current directory, if
there is one.
For #40276
Change-Id: I922e71719b3a4e0c779ce7a30429355fc29930bf
Reviewed-on: https://go-review.googlesource.com/c/go/+/254365
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
The new semantics of the "all" package pattern can be implemented
without actually changing module loading per se. This change
implements those semantics, so that the change can be decoupled from
the changes to the module requirement graph.
For #36460
Change-Id: I0ee8b17afa8b728dc470a42a540fcc01764a4442
Reviewed-on: https://go-review.googlesource.com/c/go/+/240623
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Change the section to use <dl>, <dt>, and <dd> tags to match
previous documents.
Change-Id: Ide0bea698a84ed6b61b364ef9e2f3801ebb8d4d6
Reviewed-on: https://go-review.googlesource.com/c/go/+/250897
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes the file server to reject requests of the form:
"Range": "bytes=--N"
where "-N" is a negative suffix-length as designated by the
grammar in RFC 7233 Section 2.1, "Byte-Ranges", which specifies
that suffix-length MUST be of the form 1*DIGIT aka a non-negative digit.
Thus requests such as:
"Range": "bytes=--2"
will be rejected with a "416 Range Not Satisfiable" response.
Fixes#40940
Change-Id: I3e89f8326c14af30d8bdb126998a50e02ba002d9
Reviewed-on: https://go-review.googlesource.com/c/go/+/252497
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This catches cases where a test calls code that calls os.Exit(0),
thereby skipping all subsequent tests.
Fixes#29062
Change-Id: If9478972f40189e27623557e7141469ca4234d89
Reviewed-on: https://go-review.googlesource.com/c/go/+/250977
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This permits programs to reliably detect whether they are using a
closed network connection.
Fixes#4373
Change-Id: Ib4ce8cc82bbb134c4689f0ebc8b9b11bb8b32a22
Reviewed-on: https://go-review.googlesource.com/c/go/+/250357
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>
For #24031
Change-Id: I9bd0905e9aacee4bec3463b7d91f6f0929744752
Reviewed-on: https://go-review.googlesource.com/c/go/+/228384
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The StripPrefix wrapper strips a prefix string from the request's
URL.Path field, but doesn't touch the RawPath field. This leads to the
confusing situation when StripPrefix handles a request with URL.RawPath
populated (due to some escaped characters in the request path) and the
wrapped request's RawPath contains the prefix but Path does not.
This change modifies StripPrefix to strip the prefix from both Path and
RawPath. If there are escaped characters in the prefix part of the
request URL the stripped handler serves a 404 instead of invoking the
underlying handler with a mismatched Path/RawPath pair.
This is a backward incompatible change for a very small minority of
requests; I would be surprised if anyone is depending on this behavior,
but it is possible. If that's the case, we could make a more
conservative change where the RawPath is trimmed if possible, but when
the prefix contains escaped characters then we don't 404 but rather send
through the invalid Path/RawPath pair as before.
Fixes#24366
Change-Id: I7030b8c183a3dfce307bc0272bba9a18df4cfe08
Reviewed-on: https://go-review.googlesource.com/c/go/+/233637
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The log package is used with the net/http but was not in the import clause.
Change-Id: Ic45b987633adf0ee15defd4d136b5d37027e22b0
GitHub-Last-Rev: e74aff5337
GitHub-Pull-Request: golang/go#36674
Reviewed-on: https://go-review.googlesource.com/c/go/+/215618
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Add a draft version of a blurb on improvements to the linker. This
will need to be finalized later in the release since there are still
some additional changes to be made to the linker in 1.16.
Updates #40703.
Change-Id: Id85c7e129071cc2faacb09c53a2968bd52b0a7b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/248238
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
In Go 1.15 we switched the default linking mode for PIE on
Linux/AMD64 and Linux/ARM64 to internal linking. Clarify that
the previous behavior (external linking) can still be used with
a flag.
Fixes#40719.
Change-Id: Ib7042622bc91e1b1aa31f520990d03b5eb6c56bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/248199
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This template is based on CL 220278 and previous ones like it.
Include Compiler and Linker sections proactively, they can be
removed if they don't end up being needed for Go 1.16.
Use two spaces of indentation for TODOs to set a better precedent
for the final text that will take its place.
'relnote -html' does not report any changes at this time.
For #40700.
Change-Id: I096b0ce0d33aaaa6fae9c91c0d2dfb89b9c5e94c
Reviewed-on: https://go-review.googlesource.com/c/go/+/248198
Reviewed-by: Carlos Amedee <carlos@golang.org>
See golang.org/cl/240657, which reverted the original change to fix the
regression reported in golang.org/issue/39427.
Updates #37419.
Change-Id: I39fbaa0b028ee00856cffea38879a631f540f057
Reviewed-on: https://go-review.googlesource.com/c/go/+/247718
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Andrew Bonventre <andybons@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The StdFormat flag was added as part of CL 231461, where the primary aim
was to fix the bug #37476. It's expected that the existing printer modes
only adjust spacing but do not change any of the code text itself. A new
printing flag served as a way for cmd/gofmt and go/format to delegate
a part of formatting work to the printer—where it's more more convenient
and efficient to perform—while maintaining current low-level printing
behavior of go/printer unmodified.
We already have cmd/gofmt and the go/format API that implement standard
formatting of Go source code, so there isn't a need to expose StdFormat
flag to the world, as it can only cause confusion.
Consider that to format source in canonical gofmt style completely it
may require tasks A, B, C to be done. In one version of Go, the printer
may do both A and B, while cmd/gofmt and go/format will do the remaining
task C. In another version, the printer may take on doing just A, while
cmd/gofmt and go/format will perform B and C. This makes it hard to add
a gofmt-like mode to the printer without compromising on above fluidity.
This change prefers to shift back some complexity to the implementation
of the standard library, allowing us to avoid creating the new exported
printing flag just for the internal needs of gofmt and go/format today.
We may still want to re-think the API and consider if something better
should be added, but unfortunately there isn't time for Go 1.15. We are
not adding new APIs now, so we can defer this decision until Go 1.16 or
later, when there is more time.
For #37476.
For #37453.
For #39489.
For #37419.
Change-Id: I0bb07156dca852b043487099dcf05c5350b29e20
Reviewed-on: https://go-review.googlesource.com/c/go/+/240683
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This doesn't change how ExtraNames are printed, so as not to cause
unnecessary churn of current outputs. Switched the ExtraNames check to a
nil check as we are checking for just-parsed values.
Fixes#39924Fixes#39873
Change-Id: Ifa07cfc1a057d73643710a774ef8a154222db187
Reviewed-on: https://go-review.googlesource.com/c/go/+/240543
Run-TryBot: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The additions were generated using golang.org/x/build/cmd/relnote.
Updates #37419
Change-Id: I99e934377e4bb511c44908039ad6d3bfd3ee35ce
Reviewed-on: https://go-review.googlesource.com/c/go/+/241065
Run-TryBot: Carlos Amedee <carlos@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Mention support for the 64-bit RISC-V instruction set (GOARCH=riscv64)
in the "Installing Go from source" document. Also sort the list of
supported instruction sets alphabetically.
Updates #27532
Change-Id: I07a443044a41a803853978dd7f7446de89ecceb5
Reviewed-on: https://go-review.googlesource.com/c/go/+/240377
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
Also fix missing <code> tags in the other encoding/asn1 note.
Updates #37419
Change-Id: Ic0e9131016b44ed864629aa8d0a7fddb57146d21
Reviewed-on: https://go-review.googlesource.com/c/go/+/240518
Reviewed-by: Filippo Valsorda <filippo@golang.org>
The sample code in 'Interfaces and methods' section contains a
data race. Handlers are served concurrently. The handler does write
and read operations; `go test -race` would fail (with concurrent
requests). Since the doc is frozen and the code remains less
cluttered without locks/atomic, don't change the sample code.
Change-Id: I654b324d2f0b7f48497822751907c7d39e2f0e3d
Reviewed-on: https://go-review.googlesource.com/c/go/+/239877
Reviewed-by: Rob Pike <r@golang.org>
The change is rolled back in CL 240179.
For #35151
For #39876
Change-Id: Id26ccbdb482772ac31c642156a9900102397b043
Reviewed-on: https://go-review.googlesource.com/c/go/+/240012
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This adds an alt tag for accessibility. The alt text is a visual
description of the text that is read out loud to users using a
screen reader. The HTML specifications indicate that alt tags for
decorative images should be left blank.
Fixes#39861
Change-Id: I76c39a461ceabe685826aa46e4f26ad893d50634
Reviewed-on: https://go-review.googlesource.com/c/go/+/240258
Reviewed-by: Alexander Nohe <alex.nohe427@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Also crypto/tls.Config.BuildNameToCertificate.
Note that this field and method were deprecated in the Go 1.14 release,
so this change is to the 1.14 release notes.
Fixes#37626
Change-Id: If8549bc746f42a93f1903439e1b464b3e81e2c19
Reviewed-on: https://go-review.googlesource.com/c/go/+/240005
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Now that we've added a os.File.ReadFrom method, io.CopyBuffer to a
os.File will no longer use the provided buffer.
For #16474
For #36817
For #37419
Change-Id: I79a3bf778ff93eab88e88dd9ecbb8c7ea101e868
Reviewed-on: https://go-review.googlesource.com/c/go/+/238864
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Users don't necessarily know if their OS is ELF-based.
For #37419.
Change-Id: I4a4256c5f5eb34211729e1311582bb0e210f1f8d
Reviewed-on: https://go-review.googlesource.com/c/go/+/238240
Reviewed-by: Than McIntosh <thanm@google.com>
This saves a redirect and makes the document more consistent.
For #37419
Change-Id: Ic3bd62f8caacf67ffe43a359624e11bed8b8cfaf
Reviewed-on: https://go-review.googlesource.com/c/go/+/237540
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Use the binutils Git repository instead of CVS.
Change-Id: I10100ca44d64ab3621367d1d4ac9e9a50d212d0d
Reviewed-on: https://go-review.googlesource.com/c/go/+/237839
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The GCC code repository is now hosted on Git. Adjust the instructions in
gccgo_install.html accordingly.
Change-Id: I443a8b645b63e63785979bc0554521e3dc3b0bf7
Reviewed-on: https://go-review.googlesource.com/c/go/+/237798
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Other command line arguments are written in code tags, so add a code tag for consistency.
For #37419
Change-Id: I1948536c3a1860d93726484be2dc7bcb03dfdc2f
Reviewed-on: https://go-review.googlesource.com/c/go/+/237539
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Replace tab indentation with spaces for consistency, as all other indentation is done with spaces.
For #37419
Change-Id: I728a75ae0d00e637f57eb455b6039ffc1a5feed2
Reviewed-on: https://go-review.googlesource.com/c/go/+/237538
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Restore previously sent SCTs and stapled OCSP response during session
resumption for both TLS 1.2 and 1.3. This behavior is somewhat
complicated for TLS 1.2 as SCTs are sent during the server hello,
so they override what is saved in ClientSessionState. It is likely
that if the server is sending a different set of SCTs there is probably
a reason for doing so, such as a log being retired, or SCT validation
requirements changing, so it makes sense to defer to the server in
that case.
Fixes#39075
Change-Id: I3c0fa2f69c6bf0247a447c48a1b4c733a882a233
Reviewed-on: https://go-review.googlesource.com/c/go/+/234237
Reviewed-by: Filippo Valsorda <filippo@golang.org>
The minor changes to the library section has been populated
with TODOs for individual packages using relnote in CL 235757,
and they've been resolved in the following CLs.
We will look things over as part of finishing touches on
the release notes, but this TODO is resolved for beta 1.
For #37419.
Change-Id: I942f81a957fe8df8f630b4406ca29f73602d080a
Reviewed-on: https://go-review.googlesource.com/c/go/+/237157
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
CL 236857 removed all uses of whitelist/blacklist, which is great.
But it substituted awkward phrasing using allowlist/blocklist,
especially as verbs or participles. This CL uses more standard English,
like "allow the function" or "blocked functions" instead of
"allowlist the function" or "blocklisted functions".
Change-Id: I9106a2fdbd62751c4cbda3a77181358a8a6d0f13
Reviewed-on: https://go-review.googlesource.com/c/go/+/236917
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I had a look at the changes between 1.14 and master, and these are the
only two that seem relevant enough for the changelog.
There was also CL 179337 to reuse values when decoding map elements, but
it got reverted in CL 234559 and is not being included in 1.15.
Updates #37419.
Change-Id: Ib125415a953471ce29553a413d85aaf4b18a7a12
Reviewed-on: https://go-review.googlesource.com/c/go/+/236523
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
There's been plenty of discussion on the usage of these terms in tech.
I'm not trying to have yet another debate. It's clear that there are
people who are hurt by them and who are made to feel unwelcome by their
use due not to technical reasons but to their historical and social
context. That's simply enough reason to replace them.
Anyway, allowlist and blocklist are more self-explanatory than whitelist
and blacklist, so this change has negative cost.
Didn't change vendored, bundled, and minified files. Nearly all changes
are tests or comments, with a couple renames in cmd/link and cmd/oldlink
which are extremely safe. This should be fine to land during the freeze
without even asking for an exception.
Change-Id: I8fc54a3c8f9cc1973b710bbb9558a9e45810b896
Reviewed-on: https://go-review.googlesource.com/c/go/+/236857
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Khosrow Moossavi <khos2ow@gmail.com>
Reviewed-by: Leigh McCulloch <leighmcc@gmail.com>
Reviewed-by: Urban Ishimwe <urbainishimwe@gmail.com>
Use the "Core library -> runtime" section for changes that affect the
runtime package API and use the top-level "Runtime" section for
package-independent behavior changes. Also, move the one change that's
really about os (and net) into the "os" package section and reword it
to be more accurate.
Updates #37419.
Change-Id: I32896b039f29ac67308badd0d0b36e8c6e39f64f
Reviewed-on: https://go-review.googlesource.com/c/go/+/236718
Reviewed-by: Michael Knyszek <mknyszek@google.com>
The TODO was added durring the initial creation of the document.
In the current location, it makes it seem like the tzdata documents
are incomplete when they are complete. It is understood that the
entire Core library section will be a work in progress until the release.
For #37419
Change-Id: Ic857eb0ec2583781c701985ea62e519e9d940090
Reviewed-on: https://go-review.googlesource.com/c/go/+/236760
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
The current contributor documentation is tailored towards contributors
to golang/go, but we have a number of increasingly popular x/ repos.
In this CL, I tried to generalize the language to make it apply to any
repository.
Also, I fixed an old link I noticed in editors.html.
Change-Id: Id9d8e448262ed8c3a67f49be5d554ca29df9d3c1
Reviewed-on: https://go-review.googlesource.com/c/go/+/234899
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
The constants were added in CL 222637.
For #37419
Change-Id: Iae662d677d31c44a7560399ef6771f520c1f7663
Reviewed-on: https://go-review.googlesource.com/c/go/+/236682
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Per the note at the top of go1.15.html.
Updates #37419.
Change-Id: Ia6917347ca1e3ebe8c55f9c0ec74e49ff481a64f
Reviewed-on: https://go-review.googlesource.com/c/go/+/236719
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Add a blurb to the release notes mentioning that the
linker now supports DWARF generation for -buildmode=plugin,
and that plugin builds work now for freebsd/amd64.
Updates #37419.
Change-Id: I84da7a52af84a9d765f73ca7ea525e7af8d64f05
Reviewed-on: https://go-review.googlesource.com/c/go/+/236162
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Change-Id: Ie37e993e840df2c063dee98fa3f6eca8e8713ca3
Reviewed-on: https://go-review.googlesource.com/c/go/+/236177
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Add a blurb to the release notes describing improvements made to the
Go linker in the most recent development cycle.
Updates #37419.
Change-Id: I3b870f0c00efc0b7b33aab2631d8c4e1c273922d
Reviewed-on: https://go-review.googlesource.com/c/go/+/236159
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
The additions were generated using golang.org/x/build/cmd/relnote.
Updates #37419
Change-Id: Iad7b564dd7e6cbcbd0d216c2530802e086ec49cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/235757
Run-TryBot: Alexander Rakoczy <alex@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
There are no language changes in Go 1.15, so document that.
For #37419.
Change-Id: I1e96e58b701f1758d64c79881dfa0b1109836b83
Reviewed-on: https://go-review.googlesource.com/c/go/+/235580
Reviewed-by: Robert Griesemer <gri@golang.org>
Fold the descriptions of testing.T.Deadline and TestMain related changes
into the existing section for package testing.
Also link T.Deadline to its godoc.
Change-Id: I732c45fb879305099cb8a51a77ef11fba1b2f1e3
Reviewed-on: https://go-review.googlesource.com/c/go/+/234557
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Ctty was always handled as a child descriptor, but in some cases
passing a parent descriptor would also work. This depended on
unpredictable details of the implementation. Reject those cases to
avoid confusion.
Also reject setting both Setctty and Foreground, as they use Ctty
in incompatible ways. It's unlikely that any programs set both fields,
as they don't make sense together.
Fixes#29458
Change-Id: Ieba2d625711fd4b82c8e65e1feed02fd1fb25e6d
Reviewed-on: https://go-review.googlesource.com/c/go/+/231638
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
Adding the usage of PCALIGN directive for arm64, and updating some
details on using some directives defined in the textflag.h file.
Change-Id: I43d363e3337939bab69b856831caf06803a292d2
Reviewed-on: https://go-review.googlesource.com/c/go/+/227801
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This change adjusts go command to pass -buildmode=pie to cmd/link,
if -buildmode is not explicitly provided.
Fixes#35192
Change-Id: Iec020131e676eb3e9a2df9eea1929b2af2b6df04
Reviewed-on: https://go-review.googlesource.com/c/go/+/230217
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If an I/O operation fails because a deadline was exceeded,
return os.ErrDeadlineExceeded. We used to return poll.ErrTimeout,
an internal error, and told users to check the Timeout method.
However, there are other errors with a Timeout method that returns true,
notably syscall.ETIMEDOUT which is returned for a keep-alive timeout.
Checking errors.Is(err, os.ErrDeadlineExceeded) should permit code
to reliably tell why it failed.
This change does not affect the handling of net.Dialer.Deadline,
nor does it change the handling of net.DialContext when the context
deadline is exceeded. Those cases continue to return an error
reported as "i/o timeout" for which Timeout is true, but that error
is not os.ErrDeadlineExceeded.
Fixes#31449
Change-Id: I0323f42e944324c6f2578f00c3ac90c24fe81177
Reviewed-on: https://go-review.googlesource.com/c/go/+/228645
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
net/http/pprof: delta profile support
runtime/pprof: profile labels plumbing for goroutine profiles
Change-Id: I92e750dc894c8c6b3c3ba10f7be58bb541d3c289
Reviewed-on: https://go-review.googlesource.com/c/go/+/230023
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This page has moved to the x/website repo in CL 229482 (commit
golang/website@70f4ee8c7e).
Remove the old copy in this repo since it's no longer used.
For #29206.
Change-Id: Ief093ed8c5dfec43e06d473e4282275f61da74a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/229485
Reviewed-by: Alexander Rakoczy <alex@golang.org>
unsafe.Pointer safety rule #4 says "The compiler handles a Pointer
converted to a uintptr in the argument list of a call". Within escape
analysis, we've always required this be a single conversion
unsafe.Pointer->uintptr conversion, but the corresponding logic in
order is somewhat laxer, allowing arbitrary chains of OCONVNOPs from
unsafe.Pointer to uintptr.
This CL changes order to be stricter to match escape analysis.
Passes toolstash-check.
Change-Id: Iadd210d2123accb2020f5728ea2a47814f703352
Reviewed-on: https://go-review.googlesource.com/c/go/+/229578
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Clean up the code a little bit to make it clearer:
Don't check throwsplit for a SI_USER signal.
If throwsplit is set for a SigPanic signal, always throw;
discard any other flags.
Fixes#36420
Change-Id: Ic9dcd1108603d241f71c040504dfdc6e528f9767
Reviewed-on: https://go-review.googlesource.com/c/go/+/228900
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Given:
type u struct{}
func (u) M() {}
type t struct { u; u2 u }
var v = reflect.ValueOf(t{})
Package reflect allows:
v.Method(0) // v.M
v.Field(0).Method(0) // v.u.M
but panics from:
v.Field(1).Method(0) // v.u2.M
because u2 is not an exported field. However, u is not an exported
field either, so this is inconsistent.
It seems like this behavior originates from #12367, where it was
decided to allow traversing unexported embedded fields to be able to
access their exported fields, since package reflect doesn't provide an
alternative way to access promoted fields directly.
But extending that logic to promoted *methods* was inappropriate,
because package reflect's normal method handling logic already handles
promoted methods correctly. This CL corrects that mistake.
Fixes#38521.
Change-Id: If65008965f35927b4e7927cddf8614695288eb19
Reviewed-on: https://go-review.googlesource.com/c/go/+/228902
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
These are analogous to URL.RawPath and URL.EscapedPath
and allow users fine-grained control over how the fragment
section of the URL is escaped. Some tools care about / vs %2f,
same problem as in paths.
Fixes#37776.
Change-Id: Ie6f556d86bdff750c47fe65398cbafd834152b47
Reviewed-on: https://go-review.googlesource.com/c/go/+/227645
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Importing the time/tzdata package will embed a copy of the IANA
timezone database into the program. This will let the program work
correctly when the timezone database is not available on the system.
It will increase the size of the binary by about 800K.
You can also build a program with -tags timetzdata to embed the
timezone database in the program being built.
This is a roll forward of CL 224588 which was rolled back due to
test failures. In this version, the test is in the time package,
not the time/tzdata package. That lets us compare the zip file
to the time/tzdata package, ensuring that we are looking at similar
versions of tzdata information.
Fixes#21881Fixes#38013Fixes#38017
Change-Id: I916d9d8473abe201b897cdc2bbd9168df4ad671c
Reviewed-on: https://go-review.googlesource.com/c/go/+/228101
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
This reverts CL 224588.
Reason for revert: Test failing on secondary platforms.
Change-Id: Ic15fdc73a0d2b860e776733abb82c58809e13160
Reviewed-on: https://go-review.googlesource.com/c/go/+/228200
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Importing the time/tzdata package will embed a copy of the IANA
timezone database into the program. This will let the program work
correctly when the timezone database is not available on the system.
It will increase the size of the binary by about 800K.
You can also build a program with -tags timetzdata to embed the
timezone database in the program being built.
Fixes#21881Fixes#38013Fixes#38017
Change-Id: Iffddee72a8f46c95fee3bcde43c142d6899d9246
Reviewed-on: https://go-review.googlesource.com/c/go/+/224588
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
The repository of delve has already switched from the personal
account github.com/derekparker/delve to the organization account
github.com/go-delve/delve. According to go-delve/delve#1456.
Change-Id: Ie64f72c2808a8aca5059a75e2c2f11d8691e66b3
GitHub-Last-Rev: f90120c3b3
GitHub-Pull-Request: golang/go#38387
Reviewed-on: https://go-review.googlesource.com/c/go/+/227999
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Adds an entry in the Go1.15 release notes, but also
adds an example test for URL.Redacted.
Follow-up of CL 207082.
Updates #37419
Change-Id: Ibf81989778907511a3a3a3e4a03d1802b5dd9762
Reviewed-on: https://go-review.googlesource.com/c/go/+/227997
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
flag treats -h or -help as a special case to print a nice help
message, but exit with a status code of 2. This update makes
that status code 0.
Fixes#37533
Change-Id: I7e0bd29944ce46607fb7cfc6740734f7444a151a
GitHub-Last-Rev: 83f64d757b
GitHub-Pull-Request: golang/go#37530
Reviewed-on: https://go-review.googlesource.com/c/go/+/221427
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
URLs in GOPROXY may now be separated with commas (,) or pipes (|). If
a request to a proxy fails with any error (including connection errors
and timeouts) and the proxy URL is followed by a pipe, the go command
will try the request with the next proxy in the list. If the proxy is
followed by a comma, the go command will only try the next proxy if
the error a 404 or 410 HTTP response.
The go command will determine how to connect to the checksum database
using the same logic. Before accessing the checksum database, the go
command sends a request to <proxyURL>/sumdb/<sumdb-name>/supported.
If a proxy responds with 404 or 410, or if any other error occurs and
the proxy URL in GOPROXY is followed by a pipe, the go command will
try the request with the next proxy. If all proxies respond with 404
or 410 or are configured to fall back on errors, the go command will
connect to the checksum database directly.
This CL does not change the default value or meaning of GOPROXY.
Fixes#37367
Change-Id: I35dd218823fe8cb9383e9ac7bbfec2cc8a358748
Reviewed-on: https://go-review.googlesource.com/c/go/+/226460
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Go build scripts on UNIX (make.bash, all.bash) have not required
GOROOT_BOOTSTRAP since August 2017 (CL 57753). Windows build scripts
have followed suit since CL 96455. Most people building Go will have
a Go toolchain in their PATH and will not need to specify a different
toolchain.
This CL removes the GOROOT_BOOTSTRAP mention from the contribution guide
(it was there for Windows only, but it's not required anymore). The guide
is meant to be light and clear for beginners and is not supposed to be
a reference, so there's not need to keep mentioning GOROOT_BOOTSTRAP.
Also update install-source.html to reflect the current status quo,
where using the PATH is probably the first and most used default, and
GOROOT_BOOTSTRAP is just an option.
Change-Id: Iab453e61b0c749c256aaaf81ea9b2ae58822cb89
Reviewed-on: https://go-review.googlesource.com/c/go/+/224717
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This reverts CL 223257.
Reason for revert: broke TestScript/mod_gonoproxy on the longtest builders.
Change-Id: I8637c52c5a7d5333a37ed1e9998c49786525ecb1
Reviewed-on: https://go-review.googlesource.com/c/go/+/225757
Reviewed-by: Michael Matloob <matloob@golang.org>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
URLs in GOPROXY may now be separated with commas (,) or pipes (|). If
a request to a proxy fails with any error (including connection errors
and timeouts) and the proxy URL is followed by a pipe, the go command
will try the request with the next proxy in the list. If the proxy is
followed by a comma, the go command will only try the next proxy if
the error a 404 or 410 HTTP response.
The go command will determine how to connect to the checksum database
using the same logic. Before accessing the checksum database, the go
command sends a request to <proxyURL>/sumdb/<sumdb-name>/supported.
If a proxy responds with 404 or 410, or if any other error occurs and
the proxy URL in GOPROXY is followed by a pipe, the go command will
try the request with the next proxy. If all proxies respond with 404
or 410 or are configured to fall back on errors, the go command will
connect to the checksum database directly.
This CL does not change the default value or meaning of GOPROXY.
Fixes#37367
Change-Id: If53152ec1c3282c67d4909818b666af58884fb2c
Reviewed-on: https://go-review.googlesource.com/c/go/+/223257
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
If TestMain reports a wrong exit code to os.Exit, the test will be
exited with exist code inconsist with test results.
This CL eliminates the requirement of calling os.Exit in TestMain.
Now, m.Run records the execution status of its test, the outer
main func will call os.Exit with that exit code if TestMain does
not call os.Exit.
If TestMain does not call m.Run, the outer main func remain calls
os.Exit(0) as before.
Fixes#34129
Change-Id: I9598023e03b0a6260f0217f34df41c231c7d6489
Reviewed-on: https://go-review.googlesource.com/c/go/+/219639
Reviewed-by: Ian Lance Taylor <iant@golang.org>
currently the snippet is segmented but should be one code snippet.
Change-Id: Ic747faf9bb1b52f9d1786eca70616a05b71ee801
Reviewed-on: https://go-review.googlesource.com/c/go/+/211198
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Make panics more useful by printing values, if their
underlying kind is printable, instead of just their memory address.
Thus now given any custom type derived from any of:
float*, int*, string, uint*
if we have panic with such a result, its value will be printed.
Thus given any of:
type MyComplex128 complex128
type MyFloat64 float64
type MyString string
type MyUintptr uintptr
panic(MyComplex128(32.1 + 10i))
panic(MyFloat64(-93.7))
panic(MyString("This one"))
panic(MyUintptr(93))
They will now print in the panic:
panic: main.MyComplex64(+1.100000e-001+3.000000e+000i)
panic: main.MyFloat64(-9.370000e+001)
panic: main.MyString("This one")
panic: main.MyUintptr(93)
instead of:
panic: (main.MyComplex128) (0xe0100,0x138cc0)
panic: (main.MyFloat64) (0xe0100,0x138068)
panic: (main.MyString) (0x48aa00,0x4c0840)
panic: (main.MyUintptr) (0xe0100,0x137e58)
and anything else will be printed as in the past with:
panic: (main.MyStruct) (0xe4ee0,0x40a0e0)
Also while here, updated the Go1.15 release notes.
Fixes#37531
Change-Id: Ia486424344a386014f2869ab3483e42a9ef48ac4
Reviewed-on: https://go-review.googlesource.com/c/go/+/221779
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL documents that unsynchronized send and close operations
on a channel are detected as a race condition.
Fixes#27769
Change-Id: I7495a2d0dd834c3f3b6339f8ca18ea21ae979aa8
Reviewed-on: https://go-review.googlesource.com/c/go/+/219637
Reviewed-by: Rob Pike <r@golang.org>
This removes much of the complexity of the implementation and use of
the cmd/go/internal/cmdflag package, and makes the behavior of GOFLAGS
in 'go test' and 'go vet' more consistent with other subcommands.
Some of the complexity reduction has been offset by code comments and
bug fixes, particularly for the handling of GOPATH arguments and flag
terminators ('--').
Fixes#32471Fixes#18682
Change-Id: I1f6e46a7c679062e1e409e44a2b9f03b9172883b
Reviewed-on: https://go-review.googlesource.com/c/go/+/211358
Reviewed-by: Jay Conrod <jayconrod@google.com>
Adding a link to this guide will provide more value to instructing Go
users to migrate to modules.
Updates #36878
Change-Id: Ie6ab45efcd35cc5e5ba5adc16ba0ca4cca4292bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/220906
Run-TryBot: Alexander Rakoczy <alex@golang.org>
Reviewed-by: thepudds <thepudds1460@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As far as I can tell, there is no public documentation on this topic,
which cost me several days of debugging.
I am possibly unusual in that I run binaries in production with the
race detector turned on, but I think that others who do the same may
want to be aware of the risk.
Updates #26813.
Updates #37233.
Change-Id: I1f8111bd01d0000596e6057b7cb5ed017d5dc655
Reviewed-on: https://go-review.googlesource.com/c/go/+/220586
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Use consistent indentation for one of the paragraphs.
Include issue number in the visible text, so it is easier to read.
Fixes#36878
Change-Id: Iab857b26b1d27b0137e981126207089db108d530
Reviewed-on: https://go-review.googlesource.com/c/go/+/220646
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Alexander Rakoczy <alex@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL implements Ticker.Reset method in time package.
Benchmark:
name time/op
TickerReset-12 6.41µs ±10%
TickerResetNaive-12 95.7µs ±12%
Fixes#33184
Change-Id: I4cbd31796efa012b2a297bb342158f11a4a31fef
Reviewed-on: https://go-review.googlesource.com/c/go/+/220424
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts CL 217362 (6e5652bebede2d53484a872f6d1dfeb498b0b50c.)
Reason for revert: Causing failures on arm64 bots. See #33184 for more info
Change-Id: I72ba40047e4138767d95aaa68842893c3508c52f
Reviewed-on: https://go-review.googlesource.com/c/go/+/220638
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL implements Ticker.Reset method in time package.
Benchmark:
name time/op
TickerReset-12 6.41µs ±10%
TickerResetNaive-12 95.7µs ±12%
Fixes#33184
Change-Id: I12c651f81e452541bcbbc748b45f038aae1f8dae
Reviewed-on: https://go-review.googlesource.com/c/go/+/217362
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It might break a program if it was depending on undocumented behavior.
Give a proper heads up.
Fixes#37308.
Change-Id: Id65bc70def1138d5506b694329c52250b417ec6f
Reviewed-on: https://go-review.googlesource.com/c/go/+/220418
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Copied from go1.14.html, with changes redacted back to TODOs following
the model of CL 195058.
'relnote -html' does not report any changes at this time.
Updates #33738
Change-Id: I580232805ab7db35935f3e1ba03b720be4796a7e
Reviewed-on: https://go-review.googlesource.com/c/go/+/220278
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Run-TryBot: Alexander Rakoczy <alex@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Given that it's a package that did not exist before, was a proposal
in issue #28322, got accepted and implemented for 1.14, it seems to
be more than a minor change to the library. Highlight it accordingly.
Also specify the results are 64-bit integers, as done in CL 219340.
Updates #36878
Updates #28322
Change-Id: Idefe63d4c47a02cdcf8be8ab08c40cdb94ff2098
Reviewed-on: https://go-review.googlesource.com/c/go/+/219877
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Toshihiro Shiino <shiino.toshihiro@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
These were left out of CL 216759 because they are trivial, but I was
advised to be thorough.
Updates #36878
Change-Id: Id4fd3a84866a82265e3f89abfdad6e3d231b507c
Reviewed-on: https://go-review.googlesource.com/c/go/+/218918
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Moved /doc/modules.md from GOROOT to x/website. The corresponding
change in x/website is CL 218239. See explanation there.
Updates #33637
Change-Id: I329935624e6e264873bc68b6487405a63d3e7030
Reviewed-on: https://go-review.googlesource.com/c/go/+/218240
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
"Minor changes to the library" are basically arranged in alphabetical
order, but there are some mistakes so we will correct them.
Updates #36878
Change-Id: I8498563b739eff9f1b0a76ead3cf290191e0ce36
Reviewed-on: https://go-review.googlesource.com/c/go/+/218638
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
For convenience, TempFile in io/ioutil now has a link to the document.
Updates #36878
Change-Id: I5c22f57c886badd8ca423e34527c4b4bb029847b
Reviewed-on: https://go-review.googlesource.com/c/go/+/218637
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Unlike the others, the dt tag of reflect is not next to the dl tag.
The dd's closing tags may or may not have been omitted. They were unified without omission.
Updates #36878
Change-Id: I4e24f93fe8763ae8a1e4392db72e0b4818884f44
Reviewed-on: https://go-review.googlesource.com/c/go/+/217701
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
HTML pages served by the website have the option to opt-in to template
processing, by including "Template: true" in the page metadata.
This functionality is documented at
403f1254bd/godoc/template.go (L5-L30).
Historically, the Go 1 release notes have used template processing
to a great extent, but release notes for all subsequent major Go
releases have not.
Since this feature is generally not used and not very well known,
it tends to do more harm than good by making it possible for errors
in the template to prevent the release notes from showing up at all.
Disable this feature for Go 1.14 release notes and onwards.
We can consider enabling it when there's a stronger need for it.
Fixes#37072
Updates #37070
Change-Id: If93553d52df12544b46c4edcf3aa5eddc2a155ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/218058
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This caused 35 test failures in Google internal code,
so it's worth mentioning in the release notes.
Updates #31810
Updates #36878Fixes#37066
Change-Id: I2faa6bce4c7d735107eceaef7d95223844846454
Reviewed-on: https://go-review.googlesource.com/c/go/+/217978
Reviewed-by: Rob Pike <r@golang.org>
Documents io/ioutil.TempDir's new ability to create
predictable prefixes and suffixes, derived from the argument
'pattern', separated by the last '*' in it.
References: CL 198488
Updates #36878
Change-Id: I92c52fcc7d480ce74746e99e6e85a04efb87294f
Reviewed-on: https://go-review.googlesource.com/c/go/+/217780
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Document that for Windows, net/http.ServeFile can now
correctly serve files >2GB after we fixed internal/poll.SendFile
to transmit files larger than the default Windows limit of 2GB.
References: CL 192518, CL 194218
Updates #36878
Change-Id: Ibefc8b2841bc0cee3a89884a680085f99d2b6928
Reviewed-on: https://go-review.googlesource.com/c/go/+/217779
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In CL 199417, we updated “How to Write Go Code” to give a basic
introduction to modules and to include module-mode commands.
However, most new users will end up reading “Getting Started”
(doc/install.html) before “How to Write Go Code”, and we forgot to
update the handful of commands there for module mode.
Before this change, the “Test your installation” section also covered
quite a few operations beoyond merely testing the installation: it
included setting up a GOPATH, building a binary, and installing and
cleaning binaries. Those are valuable operations to learn, but they
arguably belong in “How to Write Go Code”, not “Test your
installation” — and having all that extra detail in the install
instructions may well discourage folks from further essential reading.
Rather than updating all of those operations here, I've removed them.
A companion CL will update “How to Write Go Code” to ensure that it
mentions GOPATH (as the location of the module cache and the default
install location for binaries) and 'go clean -i'.
Updates #37042
Change-Id: I157f21ccbe3896575fa1115dc821abf6c71ed15e
Reviewed-on: https://go-review.googlesource.com/c/go/+/217840
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Tyler Bui-Palsulich <tbp@google.com>
These 3 release notes have had an element ID collision because both
the runtime changes and changes to the package "runtime" used the
same ID. Fix it by using a "pkg-" prefix for the runtime package.
Move the "runtime-again" ID from CL 129635 to a nearby <dt> element
so that existing links to https://golang.org/doc/go1.11#runtime-again
don't break.
Fixes#37036
Updates #36878
Change-Id: Ib68d93acfac802fd84c0a57485937e45dea2064a
Reviewed-on: https://go-review.googlesource.com/c/go/+/217797
Reviewed-by: Toshihiro Shiino <shiino.toshihiro@gmail.com>
Reviewed-by: Agniva De Sarker <agniva.quicksilver@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Previously, the release notes broke up the sentences that modules
is now ready for production use and where to file issues for
migration problems into separate paragraphs. This made it look like
the migration paragraph was about upgrading to 1.14, not to modules,
and made the reading a bit confusing. Now the entire idea is in one
paragraph.
Change-Id: I10bddfb8aba5f5909ac6842f25e3e97d505835e6
Reviewed-on: https://go-review.googlesource.com/c/go/+/217720
Run-TryBot: Katie Hockman <katie@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The solaris-amd64-oraclerel builder is passing for the main Go repo
(on tip and release branches for 1.13 and 1.12), and golang.org/x repos
(also on tip and release branches for 1.13 and 1.12).
The builder is still maintained as described at
https://golang.org/issue/15581#issuecomment-550368581.
Updates #36878
Updates #15581
Change-Id: Icc6f7529ca2e05bb34f09ce4363d9582e80829c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/217738
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
There is an active builder that was added in CL 201597,
and it is passing on Go tip and release-branch.go1.13
(with one failure that appears to be flaky due to being
out of memory). It's also passing on all golang.org/x repos
on tip and release-branch.go1.13. It's not configured to
run on Go 1.12 release branches.
Updates #36878
Updates #15581
Change-Id: I4ed7fc62c11a09743832fca39bd61fa0cf6e7ded
Reviewed-on: https://go-review.googlesource.com/c/go/+/217737
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Both the Dragonfly release and tip builder have been passing for a
while. The net package's interface API is working on both builders since
CL 202317 which has been re-vendored in CL 202438.
Updates #34368
Updates #36878
Change-Id: I187178b3a59f2604187af453207fb4e24a56105c
Reviewed-on: https://go-review.googlesource.com/c/go/+/217358
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This saves a redirect and makes the document more consistent.
Change-Id: I67840f5dc05dffd8893a055618eb202b682a0ebc
Reviewed-on: https://go-review.googlesource.com/c/go/+/217698
Reviewed-by: Ian Lance Taylor <iant@golang.org>
GCD is a method, not a function, so the link was broken.
Change-Id: Icbb09d39959e7c71a48987b15bb82febe12c3a19
Reviewed-on: https://go-review.googlesource.com/c/go/+/217303
Reviewed-by: Ian Lance Taylor <iant@golang.org>
A few minor changes that didn't feel worth mentioning:
* CL 205059: support leaving Certificates/GetCertificate nil if
GetConfigForClient is set
* CL 205059: send the unrecognized_name alert when there are no
available certificates
* CL 205068: add correct names for CHACHA20_POLY1305 ciphersuite constants
* CL 204046: fix CreateCRL for Ed25519 CAs
* CL 205058: add CertificateRequestInfo.Version
Change-Id: Ie820fb0c6842e669edde031132c7cda5b09e7682
Reviewed-on: https://go-review.googlesource.com/c/go/+/216759
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This heading was below the minor changes to the standard library.
It should be on top.
Many of the minor changes have been documented, so remove the broad
TODO comment. It is still a TODO to highlight more prominent changes
to the library, if there are any, under the "Core library" heading.
Updates #36878
Change-Id: If7fd9af9a933af917523e33fd2922c5f3c02c98b
Reviewed-on: https://go-review.googlesource.com/c/go/+/217277
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Some tweaks based on comments from CL 216917.
Change-Id: I538ea0dfa947b53d5c4a7135c1aec912b0357083
Reviewed-on: https://go-review.googlesource.com/c/go/+/217121
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Minor edits to text on go command changes.
Also, moved a note about runtime respecting zone CPU caps from
Native Client section to Runtime section.
Change-Id: Ic21e59d7ffecb4b5676a841e7f3743203a82d266
Reviewed-on: https://go-review.googlesource.com/c/go/+/216878
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Fixes#36690.
Change-Id: Id4234ab9467270d51f0411375b71ece7f41269b2
Reviewed-on: https://go-review.googlesource.com/c/go/+/215817
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Hopefully this won't affect many people, but it's a substantial change
in behavior for a specific case, so it's probably worth mentioning.
Updates #32027
Change-Id: I61cd50e93d0199e94b011cc90150e072b6bb10ca
Reviewed-on: https://go-review.googlesource.com/c/go/+/216597
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The public proxy and checksum database launched with Go 1.13 have been
running smoothly, pkg.go.dev is serving module-aware documentation,
and in 1.14 we have improved the vendoring workflow and finished
Subversion support to reach parity with GOPATH mode for users of those
features, updated documentation (including the “How to Write Go Code”
intro document) and published blog posts describing common modes of
usage, and improved the migration path for existing v2+ modules by
making version resolution less aggressive about "+incompatible" major
versions.
We (always) have more fit-and-finish work to do, but at this point we
believe that module mode will provide a better user experience than
GOPATH mode for most users, including in production use.
Change-Id: I897e0a43e3aebe4c90553c414337a46bfc9c2bef
Reviewed-on: https://go-review.googlesource.com/c/go/+/216317
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Katie Hockman <katie@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The HTML linter 'tidy' reports:
go_spec.html:2556: Warning: unescaped & which should be written as &
go_spec.html:3293: Warning: unescaped & or unknown entity "&s1"
go_spec.html:3293: Warning: unescaped & or unknown entity "&a"
go_spec.html:3294: Warning: unescaped & or unknown entity "&s2"
go_spec.html:3294: Warning: unescaped & or unknown entity "&a"
go_spec.html:2045: Warning: trimming empty <p>
go_spec.html:4526: Warning: trimming empty <ul>
go_spec.html:4533: Warning: trimming empty <ul>
go_spec.html:4539: Warning: trimming empty <ul>
This CL fixes all but the <ul> ones, which I think should be fixed
but are defended by a comment.
Change-Id: I0ca88f5e80755024801877ab1298025ecf8f10c5
Reviewed-on: https://go-review.googlesource.com/c/go/+/214457
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
