Clean up the code a little bit to make it clearer:
Don't check throwsplit for a SI_USER signal.
If throwsplit is set for a SigPanic signal, always throw;
discard any other flags.
Fixes#36420
Change-Id: Ic9dcd1108603d241f71c040504dfdc6e528f9767
Reviewed-on: https://go-review.googlesource.com/c/go/+/228900
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Wait for Listeners to drop to zero too, not just conns.
Fixes#33313
Change-Id: I09350ae38087990d368dcf9302fbde3e95c02fcd
Reviewed-on: https://go-review.googlesource.com/c/go/+/213442
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hasit Bhatt <hasit.p.bhatt@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently markrootSpans, the scanning routine which scans span specials
(particularly finalizers) as roots, uses sweepSpans to shard work and
find spans to mark.
However, as part of a future CL to change span ownership and how
mcentral works, we want to avoid having markrootSpans use the sweep bufs
to find specials, so in this change we introduce a new mechanism.
Much like for the page reclaimer, we set up a per-page bitmap where the
first page for a span is marked if the span contains any specials, and
unmarked if it has no specials. This bitmap is updated by addspecial,
removespecial, and during sweeping.
markrootSpans then shards this bitmap into mark work and markers iterate
over the bitmap looking for spans with specials to mark. Unlike the page
reclaimer, we don't need to use the pageInUse bits because having a
special implies that a span is in-use.
While in terms of computational complexity this design is technically
worse, because it needs to iterate over the mapped heap, in practice
this iteration is very fast (we can skip over large swathes of the heap
very quickly) and we only look at spans that have any specials at all,
rather than having to touch each span.
This new implementation of markrootSpans is behind a feature flag called
go115NewMarkrootSpans.
Updates #37487.
Change-Id: I8ea07b6c11059f6d412fe419e0ab512d989377b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/221178
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Previously for a method value "x.M", we always flowed x directly to
the heap, which led to the receiver argument generally needing to be
heap allocated.
This CL changes it to flow x to the closure and M's receiver
parameter. This allows receiver arguments to be stack allocated as
long as (1) the closure never escapes, *and* (2) method doesn't leak
its receiver parameter.
Within the standard library, this allows a handful of objects to be
stack allocated instead. Listed here are diagnostics that were
previously emitted by "go build -gcflags=-m std cmd" that are no
longer emitted:
archive/tar/writer.go:118:6: moved to heap: f
archive/tar/writer.go:208:6: moved to heap: f
archive/tar/writer.go:248:6: moved to heap: f
cmd/compile/internal/gc/initorder.go:252:2: moved to heap: d
cmd/compile/internal/gc/initorder.go:75:2: moved to heap: s
cmd/go/internal/generate/generate.go:206:7: &Generator literal escapes to heap
cmd/internal/obj/arm64/asm7.go:910:2: moved to heap: c
cmd/internal/obj/mips/asm0.go:415:2: moved to heap: c
cmd/internal/obj/pcln.go:294:22: new(pcinlineState) escapes to heap
cmd/internal/obj/s390x/asmz.go:459:2: moved to heap: c
crypto/tls/handshake_server.go:56:2: moved to heap: hs
Thanks to Cuong Manh Le for help coming up with this solution.
Fixes#27557.
Change-Id: I8c85d671d07fb9b53e11d2dd05949a34dbbd7e17
Reviewed-on: https://go-review.googlesource.com/c/go/+/228263
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL refactors tagHole to handle all three call situations (unknown
function; known function in same analysis batch; known function in
previous analysis batch). This will make it somewhat easier to reuse
in a followup CL.
Passes toolstash-check.
Change-Id: I764d047a333dfc593d721a881361683e94b485df
Reviewed-on: https://go-review.googlesource.com/c/go/+/229059
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
During schedinit, these may occur in:
mProf_Malloc
stkbucket
newBucket
persistentalloc
persistentalloc1
mProf_Malloc
setprofilebucket
fixalloc.alloc
persistentalloc
persistentalloc1
These seem to be legitimate lock orderings.
Additionally, mheap.speciallock had a defined rank, but it was never
actually used. That is fixed now.
Updates #38474
Change-Id: I0f6e981852eac66dafb72159f426476509620a65
Reviewed-on: https://go-review.googlesource.com/c/go/+/228786
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
When generating code for unsigned equals (==) and not equals (!=)
comparisons we currently, on s390x, always use signed comparisons.
This mostly works well, however signed comparisons on s390x sign
extend their immediates and unsigned comparisons zero extend them.
For compare-and-branch instructions which can only have 8-bit
immediates this significantly changes the range of immediate values
we can represent: [-128, 127] for signed comparisons and [0, 255]
for unsigned comparisons.
When generating equals and not equals checks we don't neet to worry
about whether the comparison is signed or unsigned. This CL
therefore adds rules to allow us to switch signedness for such
comparisons if it means that it brings a constant into range for an
8-bit immediate.
For example, a signed equals with an integer in the range [128, 255]
will now be implemented using an unsigned compare-and-branch
instruction rather than separate compare and branch instructions.
As part of this change I've also added support for adding a name
to block control values using the same `x:(...)` syntax we use for
value rules.
Triggers 792 times when compiling cmd and std.
Change-Id: I77fa80a128f0a8ce51a2888d1e384bd5e9b61a77
Reviewed-on: https://go-review.googlesource.com/c/go/+/228642
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This reverts commit 1f0738c157.
Reason for revert: This May have caused issue 38567.
Change-Id: I2afa6a9d42cb29cfad09e706fb465c57e3774abd
Reviewed-on: https://go-review.googlesource.com/c/go/+/229301
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Use nlzX variants instead. While at it, also remove tests involve
nlz/nlo/nto/log2, since when we are calling directly "math/bits"
functions.
Passes toolstash-check.
Change-Id: I83899741a29e05bc2c19d73652961ac795001781
Reviewed-on: https://go-review.googlesource.com/c/go/+/229138
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
go/build.Import can return errors for many different reasons like
inconsistent package clauses or errors parsing build constraints.
It will still return a *build.Package with imports from files it was
able to process. Package.load should load these imports, even after an
unknown error.
There is already a special case for scanner.ErrorList (parse
error). This CL expands that behavior for all errors.
Fixes#38568
Change-Id: I871827299c556f1a9a5b12e7755b221e9d8c6e0e
Reviewed-on: https://go-review.googlesource.com/c/go/+/229243
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Thie CL changes cmd/compile/internal/syntax to give the gc half of
the compiler more control over pragma handling, so that it can prepare
better errors, diagnose misuse, and so on. Before, the API between
the two was hard-coded as a uint16. Now it is an interface{}.
This should set us up better for future directives.
In addition to the split, this CL emits a "misplaced compiler directive"
error for any directive that is in a place where it has no effect.
I've certainly been confused in the past by adding comments
that were doing nothing and not realizing it. This should help
avoid that kind of confusion.
The rule, now applied consistently, is that a //go: directive
must appear on a line by itself immediately before the declaration
specifier it means to apply to. See cmd/compile/doc.go for
precise text and test/directive.go for examples.
This may cause some code to stop compiling, but that code
was broken. For example, this code formerly applied the
//go:noinline to f (not c) but now will fail to compile:
//go:noinline
const c = 1
func f() {}
Change-Id: Ieba9b8d90a27cfab25de79d2790a895cefe5296f
Reviewed-on: https://go-review.googlesource.com/c/go/+/228578
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Split out DWARF symbol-to-section assignment into its own separate
helper routine, to improve readability. No change in functionality.
Change-Id: Ic2e4f4d99afbff65161cbb8bd63e866ea555f322
Reviewed-on: https://go-review.googlesource.com/c/go/+/228957
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Additional cleanups and refactorings in the allocateSections portion
of dodata. Introduce some new helper routines to be used for common
cases in creating sections and assigning symbols, with a goal of
reducing duplicated code blocks and having more readable code.
No change in functionality.
Change-Id: I1b020b3ee993674329b2bebfd7c35995e3a2c043
Reviewed-on: https://go-review.googlesource.com/c/go/+/228883
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
In cmd/go/internal/modfetch/fetch.go,
`checkModSum()` forgets Unlock before return, which may lead to deadlock.
876c1feb7d/src/cmd/go/internal/modfetch/fetch.go (L514-L520)
The fix is to add `goSum.mu.Unlock()` before return.
Change-Id: I855b1c1bc00aeada2c1e84aabb5328f02823007d
GitHub-Last-Rev: afeb3763dd
GitHub-Pull-Request: golang/go#38563
Reviewed-on: https://go-review.googlesource.com/c/go/+/229219
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
The trace tool had a broken link due to a parameter encoding error,
which has been corrected.
In addition:
- the user regions page has been enhanced to include links to
pprof style profiles for region specific io, block, syscall and
schedwait profiles.
- sortable table headers have a pointer cursor to indicate they're
clickable.
Fixes#38518
Change-Id: I26cd5157bd9753750f5f53ea03aac5d2d41b021c
Reviewed-on: https://go-review.googlesource.com/c/go/+/228899
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
This is more or less a direct translation, to get things going.
There are more things we can do to make it better, especially on
the handling of container symbols.
Change-Id: I11a0087e402be8d42b9d06869385ead531755272
Reviewed-on: https://go-review.googlesource.com/c/go/+/229125
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
On Plan 9, FileOpen with flag O_CREATE & ~O_TRUNC is done in two
steps. First, syscall.Open is attempted, to avoid truncation when opening
an existing file. If that fails because the file doesn't exist,
syscall.Create is used to create a new file. If the Create fails,
for example because we are racing with another process to create a
ModeExclusive file, the PathError returned from FileOpen should reflect
the result of the Create, not the "does not exist" error from the initial
Open attempt.
Fixes#38540
Change-Id: I90c95a301de417ecdf79cd52748591edb1dbf528
Reviewed-on: https://go-review.googlesource.com/c/go/+/229099
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>
Convert first section of 386 optimization rules to the typed aux form.
Adds addOffset{32,64} functions that returns ValAndOffs and a
ValAndOff.canAdd32 function that takes an int32.
Passes
GOARCH=386 gotip build -toolexec 'toolstash -cmp' -a std
Change-Id: I69d2a8ace6936d5e8ba6ba047183002bf07dd5be
Reviewed-on: https://go-review.googlesource.com/c/go/+/228825
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This is the second attempt. The first attempt was CL 229127,
which got rolled back by CL 229177, because it caused
an infinite loop during compilation on some platforms.
I didn't notice that the trybots hadn't completed when I submitted; mea culpa.
The bug was that we were checking x&(x-1)==0, which is also true of 0,
which does not have exactly one bit set.
This caused an infinite rewrite rule loop.
Updates #38547
file before after Δ %
compile 19678112 19669808 -8304 -0.042%
total 113143160 113134856 -8304 -0.007%
Change-Id: I417a4f806e1ba61277e31bab2e57dd3f1ac7e835
Reviewed-on: https://go-review.googlesource.com/c/go/+/229197
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Given:
type u struct{}
func (u) M() {}
type t struct { u; u2 u }
var v = reflect.ValueOf(t{})
Package reflect allows:
v.Method(0) // v.M
v.Field(0).Method(0) // v.u.M
but panics from:
v.Field(1).Method(0) // v.u2.M
because u2 is not an exported field. However, u is not an exported
field either, so this is inconsistent.
It seems like this behavior originates from #12367, where it was
decided to allow traversing unexported embedded fields to be able to
access their exported fields, since package reflect doesn't provide an
alternative way to access promoted fields directly.
But extending that logic to promoted *methods* was inappropriate,
because package reflect's normal method handling logic already handles
promoted methods correctly. This CL corrects that mistake.
Fixes#38521.
Change-Id: If65008965f35927b4e7927cddf8614695288eb19
Reviewed-on: https://go-review.googlesource.com/c/go/+/228902
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts commit 066c47ca5f.
Reason for revert: This appears to have broken a bunch of builders.
Change-Id: I68b4decf3c1892766e195d8eb018844cdff69443
Reviewed-on: https://go-review.googlesource.com/c/go/+/229177
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This was accidentally broken in CL 166462, which introduce another
function in the panicking path without adjusting the argument to
runtime.Caller.
Change-Id: Ib6f9ed8673fefd458c7a4e3a918c45c5b31ca552
Reviewed-on: https://go-review.googlesource.com/c/go/+/229082
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This is followup of CL 228860, which rewrite shift rules to use typed
aux. That CL introduced nlz* functions, to refactor left shift rules.
While at it, we realize there's a bug in old rules with both right/left
shift rules, but only fix for left shift rules only.
This CL fixes the bug for right shift rules.
Passes toolstash-check.
Change-Id: Id8f2158b1b66c9e87f3fdeaa7ae3e35dc0666f8b
Reviewed-on: https://go-review.googlesource.com/c/go/+/229137
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
This optimization works on any integer with exactly one bit set.
This is identical to being a power of two, except in the
most negative number. Use oneBit instead.
The rule now triggers in a few more places in std+cmd,
in packages encoding/asn1, crypto/elliptic, and
vendor/golang.org/x/crypto/cryptobyte.
This change obviates the need for CL 222479
by doing this optimization consistently in the compiler.
Change-Id: I983c6235290fdc634fda5e11b10f1f8ce041272f
Reviewed-on: https://go-review.googlesource.com/c/go/+/229124
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This reverts commit 98c32670fd454939794504225dca1d4ec55045d5.
Rolling-forward with trivial format-string fix
cmd/compile: adjust RISCV64 rewrite rules to use typed aux fields
Also add a typed version of mergeSym to rewrite.go to assist with a few
rules that used mergeSym in the untyped-form.
Remove a few extra int32 overflow checks that no longer make sense, as
adding two int8s or int16s should never overflow an int32.
Passes toolstash-check -all.
Original review: https://go-review.googlesource.com/c/go/+/228882
Change-Id: Ib63db4ee1687446f0f3d9f11575a40dd85cbce55
Reviewed-on: https://go-review.googlesource.com/c/go/+/229126
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Adds a missing <title> tag to the HTML template to make it
more compliant as <title> tags are generally required for valid
HTML documents.
Change-Id: I1ab2a6ee221c8a79d3cc13d9ac6110f6f4963914
GitHub-Last-Rev: 6d519dc9dd
GitHub-Pull-Request: golang/go#38313
Reviewed-on: https://go-review.googlesource.com/c/go/+/227547
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Each invocation of 'go list' may consume a significant quantity of
system resources, including buffers for reading files and RAM for the
runtime's memory footprint.
Very small builders may even hit swap as a result of that load,
further exacerbating resource contention.
To avoid overloading small builders, restrict 'go list' calls to
runtime.GOMAXPROCS as it is set at the first call to loadImports.
This also somewhat improves running time even on larger machines: on
my workstation, this change reduces the wall time for 'go test
cmd/api' by around 100ms.
Updates #38537
Change-Id: I968e0f961a8f1d84c27e1ab8b621b9670dcfd448
Reviewed-on: https://go-review.googlesource.com/c/go/+/228998
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Also add a typed version of mergeSym to rewrite.go to assist with a few
rules that used mergeSym in the untyped-form.
Remove a few extra int32 overflow checks that no longer make sense, as
adding two int8s or int16s should never overflow an int32.
Passes toolstash-check -all.
Change-Id: I72ddd2b0d9001faa87ad0ab54f500057164661b7
Reviewed-on: https://go-review.googlesource.com/c/go/+/228882
Reviewed-by: Keith Randall <khr@golang.org>
The rewrite loop in shortcircuit is identical to the one in fuse.
That's not surprising; shortcircuit is fuse-like.
Take advantage of that by merging the two loops.
Passes toolstash-check.
Change-Id: I642cb39a23d2ac8964ed577678f062fce721439c
Reviewed-on: https://go-review.googlesource.com/c/go/+/229003
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Create a couple of helper routines to aid in assigning symbols to
sections in dodata's allocateSections, then replace loops over symbol
lists with calls to the helpers, to reduce the amount of duplicate
code.
This patch also decouples gcprog/gcdata generation from
symbol-to-section assignment (previously intertwined), as an aid to
making the code less complicated.
No change in functionality.
Change-Id: If126579486bce458f697e32bad556df453df53e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/228781
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Change linker DWARF generation to move away from emitting a single
giant list of DWARF symbols, and instead emit a list of descriptors,
with each descriptor holding the symbols for a specific DWARF section.
While placing all DWARF symbols in a single lists does come in handy
in certain instances, it also creates a lot of confusion and weird
code in other cases, specifically where we want to perform operations
on a section-by-section basis (resulting in code that tries to
re-discover section boundaries by walking/inspecting the list).
Change-Id: I4dac81bd38cba903c9fd7004d613597e76dfb77a
Reviewed-on: https://go-review.googlesource.com/c/go/+/228780
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Move more items into the dodata state object (including the "datsize"
variable used in allocateSections) and the Link ctxt pointer), so as
to prepare for follow-on refactorings. No change in functionality.
Change-Id: Ie2b1651c1ac9b89deb3f7692227dcd931240afa9
Reviewed-on: https://go-review.googlesource.com/c/go/+/228779
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Previously the Tx would drop the connection after rolling back from
a context cancel. Now if the driver can reset the session,
keep the connection.
Change-Id: Ie6a3124275632787629844d91a06bb2e70cc060b
Reviewed-on: https://go-review.googlesource.com/c/go/+/216241
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The fallocate calls will lower the chances of SIGBUS in the linker, but
it might still happen on other unsupported platforms and filesystems.
Darwin cmd/compile stats:
Munmap 16.0ms ± 8% 0.8ms ± 3% -95.19% (p=0.000 n=8+10)
TotalTime 484ms ± 2% 462ms ± 2% -4.52% (p=0.000 n=10+9)
Updates #37310
Change-Id: I41c6e490adec26fa1ebee49a5b268828f5ba05e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/228385
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
deadcode's been completely replaced. Make its death official.
Change-Id: I85f1e3968463f216b8bce2fb7217c3b51641939f
Reviewed-on: https://go-review.googlesource.com/c/go/+/229002
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When using plugins, on darwin we do weird things with
runtime.etext symbol, assigning a value for it, then clear it,
reassign a different value. This breaks the logic of writing text
address directly.
I think we should remove the weird thing with runtime.etext, if
possible. But for now, disable the optimization (this is not a
common case anyway).
Fix darwin-nocgo build.
Change-Id: Iab6a9f8519115226a5bbaaafe4a93f17042a928a
Reviewed-on: https://go-review.googlesource.com/c/go/+/229057
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
It was possible for a Tx that was aborted for rollback
asynchronously to execute a query after the rollback had completed
on the database, which often would auto commit the query outside
of the transaction.
By W-locking the tx.closemu prior to issuing the rollback
connection it ensures any Tx query either fails or finishes
on the Tx, and never after the Tx has rolled back.
Fixes#34775Fixes#32942
Change-Id: I017b7932082f2f4ead70bae08b61ed9068ac1d01
Reviewed-on: https://go-review.googlesource.com/c/go/+/216240
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
With the original connection reuse strategy, it was possible that
when a new connection was requested, the pool would wait for an
an existing connection to return for re-use in a full connection
pool, and then it would check if the returned connection was expired.
If the returned connection expired while awaiting re-use, it would
return an error to the location requestiong the new connection.
The existing call sites requesting a new connection was often the last
attempt at returning a connection for a query. This would then
result in a failed query.
This change ensures that we perform the expiry check right
before a connection is inserted back in to the connection pool
for while requesting a new connection. If requesting a new connection
it will no longer fail due to the connection expiring.
Fixes#32530
Change-Id: If16379befe0e14d90160219c0c9396243fe062f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/216197
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Follow-up to (and similar to) CL 228885.
Triggers a handful of times in std+cmd.
Change-Id: Ie04057ca3974ef9eef669335e326a5ed4b7472cc
Reviewed-on: https://go-review.googlesource.com/c/go/+/228999
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This has a minor positive effect on generated code,
particularly code using type switches.
Change-Id: I7269769ab0d861ef6fc9e6d7809ffc3573c68340
Reviewed-on: https://go-review.googlesource.com/c/go/+/228885
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Node.NonNil and Node.Bounded were a bit muddled. This led to #38496.
This change clarifies and documents them.
It also corrects one misuse.
However, since ssa conversion doesn't make full use of the bounded hint,
this correction doesn't change any generated code.
The next change will fix that.
Passes toolstash-check.
Change-Id: I2bcd487a0a4aef5d7f6090e653974fce0dce3b8e
Reviewed-on: https://go-review.googlesource.com/c/go/+/228787
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The core CPU profiling loop contains a 100ms sleep.
This is important to reduce overhead.
However, it means that it takes 200ms to shutting down a program
with CPU profiling enabled. When trying to collect many samples
by running a short-lived program many times, this adds up.
This change cuts the shutdown penalty in half by skipping
the sleep whenever possible.
Change-Id: Ic3177f8e1a2d331fe1a1ecd7c8c06f50beb42535
Reviewed-on: https://go-review.googlesource.com/c/go/+/228886
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
All callers to gdata knew the kind of node they were working with,
so all calls to gdata have been replaced with more specific calls.
Some OADDR nodes were constructed solely for the purpose of
passing them to gdata for unwrapping. In those cases, we can now
cut to the chase.
Passes toolstash-check.
Change-Id: Iacc1abefd7f748cb269661a03768d3367319b0b0
Reviewed-on: https://go-review.googlesource.com/c/go/+/228888
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If we are internal linking a static executable, in pclntab
generation, the function addresses are known, so we can just use
them directly instead of emitting relocations.
For external linking or other build modes, we are generating a
relocatable binary so we still need to emit relocations.
Reduce some allocations: for linking cmd/compile,
name old alloc/op new alloc/op delta
Pclntab_GC 38.8MB ± 0% 36.4MB ± 0% -6.19% (p=0.008 n=5+5)
TODO: can we also do this in DWARF generation?
Change-Id: I43920d930ab1da97c205871027e01844a07a5e60
Reviewed-on: https://go-review.googlesource.com/c/go/+/228478
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Recreation of CL 228317.
The problem with that original CL was a late requested change,
reordering reloc and asmb, resulting in symbols having stale pointers to
their data. I've fixed this by preallocating the heap variable in OutBuf
for platforms w/o mmap.
Change-Id: Icdb392ac2c8d6518830f4c84cf422e78b8ab68c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/228782
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
This is followup of CL 228861, which remove another un-necessary nil
check for s.Pkg.
Passes toolstash-check.
Change-Id: Ide750beddd2594199af21b56ec6af734dfa55b9c
Reviewed-on: https://go-review.googlesource.com/c/go/+/228862
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 228859 refactored detecting reflect package logic in to isReflectPkg
function. The function has un-necessary nil check for p, so remove that
check.
Passes toolstash-check.
Change-Id: I2f3f1ac967fe8d176dda3f3b4698ded08602e2fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/228861
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
A DWARF testpoint was calling t.Fatal() but should have been calling
t.Fatalf(); switch it to the correct method.
Change-Id: I996a1041adea4299cda85c147a35b513a219b970
Reviewed-on: https://go-review.googlesource.com/c/go/+/228790
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Convert all the 386 lowering rules to the typed aux form.
Passes
GOARCH=386 gotip build -toolexec 'toolstash -cmp' -a std
Change-Id: I15256f20bc4442391755e6fffb8206dcaab94830
Reviewed-on: https://go-review.googlesource.com/c/go/+/228818
Reviewed-by: Keith Randall <khr@golang.org>
Currently we only check for reflect.Value.Method. And
reflect.Value.MethodByName is covered since it calls
reflect.Value.Method internally. But it is brittle to rely on
implementation detail of the reflect package. Check for
MethodByName explicitly.
Change-Id: Ifa8920e997524003dade03abc4fb3c4e64723643
Reviewed-on: https://go-review.googlesource.com/c/go/+/228881
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
reflect.Type.Method (and MethodByName) can be used to obtain a
reference of a method by reflection. The linker needs to know
if reflect.Type.Method is called, and retain all exported methods
accordingly. This is handled by the compiler, which marks the
caller of reflect.Type.Method with REFLECTMETHOD attribute. The
current code failed to handle the reflect package itself, so the
method wrapper reflect.Type.Method is not marked. This CL fixes
it.
Fixes#38515.
Change-Id: I12904d23eda664cf1794bc3676152f3218fb762b
Reviewed-on: https://go-review.googlesource.com/c/go/+/228880
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
reflect.Value.Call, if reachable, used to bring all exported
methods live. CL 228792 fixes this, removing the check of
reflect.Value.Call. This CL adds a test.
Updates #38505.
Change-Id: Ib4cab3c3c86c9c9702d041266e59b159d0ff0a97
Reviewed-on: https://go-review.googlesource.com/c/go/+/228878
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The types used while generating code, such as Rule and File, have been
exported for a while. This is harmless for a main package, and lets us
easily differentiate types from variables and functions, as well as use
names like "If" since "if" is a keyword.
However, the fields remained unexported. This was a bit inconsistent,
and also meant that we couldn't use some intuitive names like If.else.
Export them.
Besides the capitalization, the only change is that the If type now has
the fields Then and Else, instead of stmt and alt.
Change-Id: I426ff140c6ca186fec394f17b29165861da5fd98
Reviewed-on: https://go-review.googlesource.com/c/go/+/228821
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Update the comment to be in sync with the code.
Change-Id: I19586767a37347c4da1b4d3f7c6dc6cc2292a90f
Reviewed-on: https://go-review.googlesource.com/c/go/+/228877
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In the linker's deadcode pass, we need to keep a method live if
it can be reached through reflection. We do this by marking all
exported method live if reflect.Value.Method or
reflect.Type.Method is used. Currently we also check for
reflect.Value.Call, which is unnecessary because in order to call
a method through reflection, the method must be obtained through
reflect.Value.Method or reflect.Type.Method, which we already
check.
Per discussion in https://groups.google.com/d/msg/golang-dev/eG9It63-Bxg/_bnoVy-eAwAJ
Thanks Brad, Russ, and Ian for bringing this up.
Change-Id: I8e9529a224bb898dbf5752674cc9d155db386c14
Reviewed-on: https://go-review.googlesource.com/c/go/+/228792
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
p.literal's doc comment said it returned a value but it doesn't.
While we're here, p.newLiteral is only called from p.literal,
so simplify the code by merging the two.
Change-Id: Ia357937a99f4e7473f0f1ec837113a39eaeb83d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/222659
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Everybody was deferring a flush when main already
did that, so drop all that nonsense. (Flush was doing
the package clause stuff.) But then make sure we do
get a package clause when there is correctly no output,
as for an empty package. Do that by triggering a
package clause in allDoc and packageDoc.
Slightly tricky but way less intricate than before.
Fixes#37969.
Change-Id: Ia86828436e6c4ab46e6fdaf2c550047f37f353f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/226998
Reviewed-by: Russ Cox <rsc@golang.org>
I'm planning to modify this test in a follow-up CL, so we might
as well convert it to a script test. I don't think there's an easy
way to detect whether we have a case-insensitive file system, without
adding a new condition to the script framework, so the test is just
guessing that darwin and windows could have case-insensitive file systems.
Change-Id: I48bb36f86f19898618681515ac448c3bb4735857
Reviewed-on: https://go-review.googlesource.com/c/go/+/228783
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
At least as far as I can tell, this file never explicitly states whether
locks with higher or lower rank should be taken first. It is implied in
some comments, and clear from the code, of course.
Add an explicit comment to make things more clear and hopefully reduce
new locks being adding in the wrong spot.
Change-Id: I17c6fd5fc216954e5f3550cf91f17e25139f1587
Reviewed-on: https://go-review.googlesource.com/c/go/+/228785
Reviewed-by: Dan Scales <danscales@google.com>
When the seconds param is given, the block and mutex profile endpoints
report the difference between two measurements collected the given
seconds apart. Historically, the block and mutex profiles have reported
the cumulative counts since the process start, and it turned out they
are more useful when interpreted along with the time duration.
Note: cpu profile and trace endpoints already accept the "seconds"
parameter. With this CL, the block and mutex profile endpoints will
accept the "seconds" parameter. Providing the "seconds" parameter
to other types of profiles is an error.
This change moves runtime/pprof/internal/profile to internal/profile and
adds part of merge logic from github.com/google/pprof/profile/merge.go to
internal/profile, in order to allow both net/http/pprof and runtime/pprof
to access it.
Fixes#23401
Change-Id: Ie2486f1a63eb8ff210d7d3bc2de683e9335fd5cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/147598
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
The call does nothing when applied to an OLSH node.
It would be unnecessary anyway, since we're shifting by a small constant.
Passes toolstash-check.
Change-Id: If858711f1704f44637fa0f6a4c66cbaad6db24b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/228699
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This first pass makes the rules using the condition code mask
(CCMask) and rotate parameters (RotateParams) aux values strongly
typed. This required adding strongly typed aux handling to the
block rulegen.
More CLs like this to follow, but this is probably the most
complex.
Passes toolstash-check -all.
Change-Id: Ie513b07d527f0c1b398d7748331442dcb5f7b17d
Reviewed-on: https://go-review.googlesource.com/c/go/+/228518
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
n.Bounded() is overloaded for multiple meanings based on n.Op. We
can't safely use n.Left.Bounded() without checking n.Left.Op.
Change-Id: I71fe4faa24798dfe3a5705fa3419a35ef93b0ce2
Reviewed-on: https://go-review.googlesource.com/c/go/+/228677
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
A case that I missed in CL 205239: profilealloc can be called at
program startup if GOMAXPROCS is large enough.
Fixes#38474
Change-Id: I2f089fc6ec00c376680e1c0b8a2557b62789dd7f
Reviewed-on: https://go-review.googlesource.com/c/go/+/228420
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
These were originally introduced for the binary export format, which
required forward references to arbitrary types and later filling them
in. They're no longer needed since we switched to the indexed export
format, which only requires forward references to declared types.
Passes toolstash-check.
Change-Id: I696dc9029ec7652d01ff49fb98e658a9ed510979
Reviewed-on: https://go-review.googlesource.com/c/go/+/228579
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
These are analogous to URL.RawPath and URL.EscapedPath
and allow users fine-grained control over how the fragment
section of the URL is escaped. Some tools care about / vs %2f,
same problem as in paths.
Fixes#37776.
Change-Id: Ie6f556d86bdff750c47fe65398cbafd834152b47
Reviewed-on: https://go-review.googlesource.com/c/go/+/227645
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
The existing implementation is not compatible with JSON
escape as it uses hex escaping.
Unicode escape, instead, is valid for both JSON and JS.
This fix avoids creating a separate escaping context for
scripts of type "application/ld+json" and it is more
future-proof in case more JSON+JS contexts get added
to the platform (e.g. import maps).
Fixes#33671Fixes#37634
Change-Id: Id6f6524b4abc52e81d9d744d46bbe5bf2e081543
Reviewed-on: https://go-review.googlesource.com/c/go/+/226097
Reviewed-by: Carl Johnson <me@carlmjohnson.net>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When a concrete type doesn't exactly implement an interface, the error
messages produced by go/types are often unhelpful. The compiler shows
the expected signature versus the one found, which is useful, so add
this behavior here.
Fixesgolang/go#38475
Change-Id: I8b780b7e1f1f433a0efe670de3b1437053f42fba
Reviewed-on: https://go-review.googlesource.com/c/go/+/228457
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
If we are internal linking a static executable, and address assignment
has happened, then when emitting some parts of DWARF we can just emit
a function address directly instead of generating a relocation. For
external linking or other build modes, we are generating a relocatable
binary so we still need to emit relocations.
This CL inspired by Cherry's similar CL for pclntab at
https://go-review.googlesource.com/c/go/+/228478.
Change-Id: Ib03fbe2dd72d0ba746bf46015e0f2d6c3f3d53ab
Reviewed-on: https://go-review.googlesource.com/c/go/+/228537
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
All platforms now support pushCall, hence remove the now unnecessary
pushCallSupported flag/guard.
Change-Id: I99e4be73839da68a742f3c239bae9ce2f8764624
Reviewed-on: https://go-review.googlesource.com/c/go/+/228497
Run-TryBot: Joel Sing <joel@sing.id.au>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Now that we have converted pclntab pass to using the loader,
trampoline insertion should work again. Add a test.
Change-Id: Ia9a0485456ac75cc6e706218a359f109cd8fce43
Reviewed-on: https://go-review.googlesource.com/c/go/+/228141
Reviewed-by: Than McIntosh <thanm@google.com>
lib.Textp2 is used to assemble the global Textp2. It is not used
after that point. Free some memory.
Slightly reduces allocation: for linking cmd/compile,
Linksetup_GC 1.10MB ± 0% 0.84MB ± 0% -23.43% (p=0.008 n=5+5)
Change-Id: Iec4572e282655306d5ff3e490f8855d479e45acf
Reviewed-on: https://go-review.googlesource.com/c/go/+/228481
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
The addend should be applied to the target symbol, not the TOC
symbol.
Change-Id: I0a14873cdcafc4ede401878882646dade9cd8e3b
Reviewed-on: https://go-review.googlesource.com/c/go/+/228479
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
The Context object we pass to GetThreadContext on Windows must be 16
byte-aligned. We also can't allocate in the contexts where we create
these, so they must be stack-allocated. There's no great way to do
this, but this CL makes the code at least a little clearer, and makes
profilem and preemptM more consistent with each other.
Change-Id: I5ec47a27d7580ed6003030bf953e668e8cae2cef
Reviewed-on: https://go-review.googlesource.com/c/go/+/207967
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
This CL adds support of call injection and async preemption on
riscv64. We also clobbered REG_TMP for the injected call. Unsafe
points related to REG_TMP access have been marked in previous commits.
Fixes#36711.
Change-Id: I1a1df5b7fc23eaafc34a6a6448fcc3c91054496e
GitHub-Last-Rev: f6110d4707
GitHub-Pull-Request: golang/go#38146
Reviewed-on: https://go-review.googlesource.com/c/go/+/226206
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Joel Sing <joel@sing.id.au>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, as a result of us releasing worldsema now to allow STW events
during a mark phase, we release worldsema between starting the world and
having the goroutine block in STW mode. This inserts preemption points
which, if followed through, could lead to a deadlock. Specifically,
because user goroutine scheduling is disabled in STW mode, the goroutine
will block before properly releasing worldsema.
The fix here is to prevent preemption while releasing the worldsema.
Fixes#38404.
Updates #19812.
Change-Id: I8ed5b3aa108ab2e4680c38e77b0584fb75690e3d
Reviewed-on: https://go-review.googlesource.com/c/go/+/228337
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
After CL 211357 (commit 499dc1c),
hasTests and numDecl were not updated properly for function
declarations with parameters, which affected the whole file
example detection logic. This caused examples like
package foo_test
func Foo(x int) {
}
func Example() {
fmt.Println("Hello, world!")
// Output: Hello, world!
}
to not be detected as whole file ones.
Change-Id: I9ebd47e52d7ee9d91eb6f8e0257511de69b2a402
GitHub-Last-Rev: cc71c31124
GitHub-Pull-Request: golang/go#37730
Reviewed-on: https://go-review.googlesource.com/c/go/+/222477
Reviewed-by: Agniva De Sarker <agniva.quicksilver@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Agniva De Sarker <agniva.quicksilver@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is an attempt to distinguish between a dropped signal and
general builder slowness.
The previous attempt (increasing the settle time to 250ms) still
resulted in a timeout:
https://build.golang.org/log/dd62939f6d3b512fe3e6147074a9c6db1144113f
For #33174
Change-Id: I79027e91ba651f9f889985975f38c7b01d82f634
Reviewed-on: https://go-review.googlesource.com/c/go/+/228266
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This saves 166 KiB for a tls.Dial hello world program (5382441 to
5212356 to bytes), by permitting the linker to remove TLS server code.
Change-Id: I16610b836bb0802b7d84995ff881d79ec03b6a84
Reviewed-on: https://go-review.googlesource.com/c/go/+/228111
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Benchmarking suggests that the combo instruction is notably slower,
at least in the places where we measure.
Updates #37955
Change-Id: I829f1975dd6edf38163128ba51d84604055512f4
Reviewed-on: https://go-review.googlesource.com/c/go/+/228157
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
The types funcAllocInfo and funcInfoSym are no longer referenced.
Fixes#38456.
Change-Id: Icd32445f6027429f4a2781554d2086790ebe5daf
Reviewed-on: https://go-review.googlesource.com/c/go/+/228318
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The Float.Sqrt method switches (for performance reasons) between
direct (uses Quo) and inverse (doesn't) computation, depending on the
precision, with threshold 128.
Unfortunately the implementation of recursive division in CL 172018
made Quo slightly slower exactly in the range around and below the
threshold Sqrt is using, so this strategy is no longer profitable.
The new division algorithm allocates more, and this has increased the
amount of allocations performed by Sqrt when using the direct method;
on low precisions the computation is fast, so additional allocations
have an negative impact on performance.
Interestingly, only using the inverse method doesn't just reverse the
effects of the Quo algorithm change, but it seems to make performances
better overall for small precisions:
name old time/op new time/op delta
FloatSqrt/64-4 643ns ± 1% 635ns ± 1% -1.24% (p=0.000 n=10+10)
FloatSqrt/128-4 1.44µs ± 1% 1.02µs ± 1% -29.25% (p=0.000 n=10+10)
FloatSqrt/256-4 1.49µs ± 1% 1.49µs ± 1% ~ (p=0.752 n=10+10)
FloatSqrt/1000-4 3.71µs ± 1% 3.74µs ± 1% +0.87% (p=0.001 n=10+10)
FloatSqrt/10000-4 35.3µs ± 1% 35.6µs ± 1% +0.82% (p=0.002 n=10+9)
FloatSqrt/100000-4 844µs ± 1% 844µs ± 0% ~ (p=0.549 n=10+9)
FloatSqrt/1000000-4 69.5ms ± 0% 69.6ms ± 0% ~ (p=0.222 n=9+9)
name old alloc/op new alloc/op delta
FloatSqrt/64-4 280B ± 0% 200B ± 0% -28.57% (p=0.000 n=10+10)
FloatSqrt/128-4 504B ± 0% 248B ± 0% -50.79% (p=0.000 n=10+10)
FloatSqrt/256-4 344B ± 0% 344B ± 0% ~ (all equal)
FloatSqrt/1000-4 1.30kB ± 0% 1.30kB ± 0% ~ (all equal)
FloatSqrt/10000-4 13.5kB ± 0% 13.5kB ± 0% ~ (p=0.237 n=10+10)
FloatSqrt/100000-4 123kB ± 0% 123kB ± 0% ~ (p=0.247 n=10+10)
FloatSqrt/1000000-4 1.83MB ± 1% 1.83MB ± 3% ~ (p=0.779 n=8+10)
name old allocs/op new allocs/op delta
FloatSqrt/64-4 8.00 ± 0% 5.00 ± 0% -37.50% (p=0.000 n=10+10)
FloatSqrt/128-4 11.0 ± 0% 5.0 ± 0% -54.55% (p=0.000 n=10+10)
FloatSqrt/256-4 5.00 ± 0% 5.00 ± 0% ~ (all equal)
FloatSqrt/1000-4 6.00 ± 0% 6.00 ± 0% ~ (all equal)
FloatSqrt/10000-4 6.00 ± 0% 6.00 ± 0% ~ (all equal)
FloatSqrt/100000-4 6.00 ± 0% 6.00 ± 0% ~ (all equal)
FloatSqrt/1000000-4 10.3 ±13% 10.3 ±13% ~ (p=1.000 n=10+10)
For example, 1.02µs for FloatSqrt/128 is actually better than what I
was getting on the same machine before the Quo changes.
The .8% slowdown on /1000 and /10000 appears to be real and it is
quite baffling (that codepath was not touched at all); it may be
caused by code alignment changes.
Change-Id: Ib03761cdc1055674bc7526d4f3a23d7a25094029
Reviewed-on: https://go-review.googlesource.com/c/go/+/228062
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This adds support support for the PCALIGN value 32. When this
directive occurs code will be aligned to 32 bytes unless
too many NOPs are needed, and then will fall back to 16
byte alignment.
On Linux the function's alignment is promoted from 16 to 32
in functions where PCALIGN 32 appears. On AIX the function's
alignment is left at 16 due to complexity with modifying its
alignment, which means code will be aligned to at least 16,
possibly 32 at times, which is still good.
Test was updated to accept new value.
Change-Id: I28e72d5f30ca472ed9ba736ddeabfea192d11797
Reviewed-on: https://go-review.googlesource.com/c/go/+/228258
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Begin refactoring dodata to try to convert it from a single giant blob
to something more hierarchical, with descriptive function names for
sub-parts.
Add a state object to hold things like "data" and "dataMaxAlign"
arrays that are used throughout dodata. Extract out the code that
allocates data symbols to sections into a separate method (this
method is still too big, probably needs to be refactored again).
No change in functionality.
Change-Id: I7b52dc2aff0356e7d4b5d6f629d907fd37d3082c
Reviewed-on: https://go-review.googlesource.com/c/go/+/228259
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Fixes#38304
Also change `If m > 0, y < 0, ...` to `If m != 0, y < 0, ...` since `Exp` will return `nil`
whatever `m`'s sign is.
Change-Id: I17d7337ccd1404318cea5d42a8de904ad185fd00
GitHub-Last-Rev: 2399510300
GitHub-Pull-Request: golang/go#38390
Reviewed-on: https://go-review.googlesource.com/c/go/+/228000
Reviewed-by: Robert Griesemer <gri@golang.org>
TestExtraFiles seems to be flaky on GNU/Linux systems when using cgo
because creating a new thread will call malloc which can create a new
arena which can open a file to see how many processors there are.
Try to avoid the flake by creating several new threads at process
startup time.
For #25628
Change-Id: Ie781acdbba475d993c39782fe172cf7f29a05b24
Reviewed-on: https://go-review.googlesource.com/c/go/+/228099
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Hoist dwarfGenerateDebugSyms call up out of dodata to before
loadlibfull. This required a couple of small tweaks to the
loader and to loadlibfull.
Change-Id: I48ffb450d2e48b9e55775b73a6debcd27dbb7b9c
Reviewed-on: https://go-review.googlesource.com/c/go/+/228221
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Importing the time/tzdata package will embed a copy of the IANA
timezone database into the program. This will let the program work
correctly when the timezone database is not available on the system.
It will increase the size of the binary by about 800K.
You can also build a program with -tags timetzdata to embed the
timezone database in the program being built.
This is a roll forward of CL 224588 which was rolled back due to
test failures. In this version, the test is in the time package,
not the time/tzdata package. That lets us compare the zip file
to the time/tzdata package, ensuring that we are looking at similar
versions of tzdata information.
Fixes#21881Fixes#38013Fixes#38017
Change-Id: I916d9d8473abe201b897cdc2bbd9168df4ad671c
Reviewed-on: https://go-review.googlesource.com/c/go/+/228101
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
When setting the edge state in register allocation we should only
be setting each register once. It is not possible for a register
to hold multiple values at once.
This CL converts the runtime error seen in #38195 into an internal
compiler error (ICE). It is better for the compiler to fail than
generate an incorrect program.
The bug reported in #38195 is now exposed as:
./parserc.go:459:11: internal compiler error: 'yaml_parser_parse_node': R5 is already set (v1074/v1241)
[stack trace]
Updates #38195.
Change-Id: Id95842fd850b95494cbd472b6fd5a55513ecacec
Reviewed-on: https://go-review.googlesource.com/c/go/+/228060
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
When deallocating the input register to a phi so that the phi
itself could be allocated to that register the code was also
deallocating all copies of that phi input value. Those copies
of the value could still be live and if they were the register
allocator could reuse them incorrectly to hold speculative
copies of other phi inputs. This causes strange bugs.
No test because this is a very obscure scenario that is hard
to replicate but CL 228060 adds an assertion to the compiler
that does trigger when running the std tests on linux/s390x
without this CL applied. Hopefully that assertion will prevent
future regressions.
Fixes#38195.
Change-Id: Id975dadedd731c7bb21933b9ea6b17daaa5c9e1d
Reviewed-on: https://go-review.googlesource.com/c/go/+/228061
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
When inserting Select0 and Select1 ops we need to ensure that they
live in the same block as their argument. This is because they need
to be scheduled immediately after their argument for register and
flag allocation to work correctly.
Fixes#38356.
Change-Id: Iba384dbe87010f1c7c4ce909f08011e5f1de7fd5
Reviewed-on: https://go-review.googlesource.com/c/go/+/227879
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 228106 moved the position at which we
checked whether a type switch variable had a particular type
from the type switch to the case statement, but only for
single, concrete types. This is a better position,
so this change changes the rest.
Change-Id: I601d4a5c4a0d9400e7804b9f1e729af948349a8f
Reviewed-on: https://go-review.googlesource.com/c/go/+/228220
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This lets us provide a better position in its use in swt.go.
Change-Id: I7c0da6bd0adea81acfc9a591e6a01b241a5e0942
Reviewed-on: https://go-review.googlesource.com/c/go/+/228219
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Consider
switch x:= x.(type) {
case int:
// int stmts
case error:
// error stmts
}
Prior to this change, we lowered this roughly as:
if x, ok := x.(int); ok {
// int stmts
} else if x, ok := x.(error); ok {
// error stmts
}
x, ok := x.(error) is implemented with a call to runtime.assertE2I2 or runtime.assertI2I2.
x, ok := x.(int) generates inline code that checks whether x has type int,
and populates x and ok as appropriate. We then immediately branch again on ok.
The shortcircuit pass in the SSA backend is designed to recognize situations
like this, in which we are immediately branching on a bool value
that we just calculated with a branch.
However, the shortcircuit pass has limitations when the intermediate state has phis.
In this case, the phi value is x (the int).
CL 222923 improved the situation, but many cases are still unhandled.
I have further improvements in progress, which is how I found this particular problem,
but they are expensive, and may or may not see the light of day.
In the common case of a lone concrete type in a type switch case,
it is easier and cheaper to simply lower a different way, roughly:
if _, ok := x.(int); ok {
x := x.(int)
// int stmts
}
Instead of using a type assertion, though, we extract the value of x
from the interface directly.
This removes the need to track x (the int) across the branch on ok,
which removes the phi, which lets the shortcircuit pass do its job.
Benchmarks for encoding/binary show improvements, as well as some
wild swings on the super fast benchmarks (alignment effects?):
name old time/op new time/op delta
ReadSlice1000Int32s-8 5.25µs ± 2% 4.87µs ± 3% -7.11% (p=0.000 n=44+49)
ReadStruct-8 451ns ± 2% 417ns ± 2% -7.39% (p=0.000 n=45+46)
WriteStruct-8 412ns ± 2% 405ns ± 3% -1.58% (p=0.000 n=46+48)
ReadInts-8 296ns ± 8% 275ns ± 3% -7.23% (p=0.000 n=48+50)
WriteInts-8 324ns ± 1% 318ns ± 2% -1.67% (p=0.000 n=44+49)
WriteSlice1000Int32s-8 5.21µs ± 2% 4.92µs ± 1% -5.67% (p=0.000 n=46+44)
PutUint16-8 0.58ns ± 2% 0.59ns ± 2% +0.63% (p=0.000 n=49+49)
PutUint32-8 0.87ns ± 1% 0.58ns ± 1% -33.10% (p=0.000 n=46+44)
PutUint64-8 0.66ns ± 2% 0.87ns ± 2% +33.07% (p=0.000 n=47+48)
LittleEndianPutUint16-8 0.86ns ± 2% 0.87ns ± 2% +0.55% (p=0.003 n=47+50)
LittleEndianPutUint32-8 0.87ns ± 1% 0.87ns ± 1% ~ (p=0.547 n=45+47)
LittleEndianPutUint64-8 0.87ns ± 2% 0.87ns ± 1% ~ (p=0.451 n=46+47)
ReadFloats-8 79.8ns ± 5% 75.9ns ± 2% -4.83% (p=0.000 n=50+47)
WriteFloats-8 89.3ns ± 1% 88.9ns ± 1% -0.48% (p=0.000 n=46+44)
ReadSlice1000Float32s-8 5.51µs ± 1% 4.87µs ± 2% -11.74% (p=0.000 n=47+46)
WriteSlice1000Float32s-8 5.51µs ± 1% 4.93µs ± 1% -10.60% (p=0.000 n=48+47)
PutUvarint32-8 25.9ns ± 2% 24.0ns ± 2% -7.02% (p=0.000 n=48+50)
PutUvarint64-8 75.1ns ± 1% 61.5ns ± 2% -18.12% (p=0.000 n=45+47)
[Geo mean] 57.3ns 54.3ns -5.33%
Despite the rarity of type switches, this generates noticeably smaller binaries.
file before after Δ %
addr2line 4413296 4409200 -4096 -0.093%
api 5982648 5962168 -20480 -0.342%
cgo 4854168 4833688 -20480 -0.422%
compile 19694784 19682560 -12224 -0.062%
cover 5278008 5265720 -12288 -0.233%
doc 4694824 4682536 -12288 -0.262%
fix 3411336 3394952 -16384 -0.480%
link 6721496 6717400 -4096 -0.061%
nm 4371152 4358864 -12288 -0.281%
objdump 4760960 4752768 -8192 -0.172%
pprof 14810820 14790340 -20480 -0.138%
trace 11681076 11668788 -12288 -0.105%
vet 8285464 8244504 -40960 -0.494%
total 115824120 115627576 -196544 -0.170%
Compiler performance is marginally improved (note that go/types has many type switches):
name old alloc/op new alloc/op delta
Template 35.0MB ± 0% 35.0MB ± 0% +0.09% (p=0.008 n=5+5)
Unicode 28.5MB ± 0% 28.5MB ± 0% ~ (p=0.548 n=5+5)
GoTypes 114MB ± 0% 114MB ± 0% -0.76% (p=0.008 n=5+5)
Compiler 541MB ± 0% 541MB ± 0% -0.03% (p=0.008 n=5+5)
SSA 1.17GB ± 0% 1.17GB ± 0% ~ (p=0.841 n=5+5)
Flate 21.9MB ± 0% 21.9MB ± 0% ~ (p=0.421 n=5+5)
GoParser 26.9MB ± 0% 26.9MB ± 0% ~ (p=0.222 n=5+5)
Reflect 74.6MB ± 0% 74.6MB ± 0% ~ (p=1.000 n=5+5)
Tar 32.9MB ± 0% 32.8MB ± 0% ~ (p=0.056 n=5+5)
XML 42.4MB ± 0% 42.1MB ± 0% -0.77% (p=0.008 n=5+5)
[Geo mean] 73.2MB 73.1MB -0.15%
name old allocs/op new allocs/op delta
Template 377k ± 0% 377k ± 0% +0.06% (p=0.008 n=5+5)
Unicode 354k ± 0% 354k ± 0% ~ (p=0.095 n=5+5)
GoTypes 1.31M ± 0% 1.30M ± 0% -0.73% (p=0.008 n=5+5)
Compiler 5.44M ± 0% 5.44M ± 0% -0.04% (p=0.008 n=5+5)
SSA 11.7M ± 0% 11.7M ± 0% ~ (p=1.000 n=5+5)
Flate 239k ± 0% 239k ± 0% ~ (p=1.000 n=5+5)
GoParser 302k ± 0% 302k ± 0% -0.04% (p=0.008 n=5+5)
Reflect 977k ± 0% 977k ± 0% ~ (p=0.690 n=5+5)
Tar 346k ± 0% 346k ± 0% ~ (p=0.889 n=5+5)
XML 431k ± 0% 430k ± 0% -0.25% (p=0.008 n=5+5)
[Geo mean] 806k 806k -0.10%
For packages with many type switches, this considerably shrinks function text size.
Some examples:
file before after Δ %
encoding/binary.s 30726 29504 -1222 -3.977%
go/printer.s 77597 76005 -1592 -2.052%
cmd/vendor/golang.org/x/tools/go/ast/astutil.s 65704 63318 -2386 -3.631%
cmd/vendor/golang.org/x/tools/go/analysis/passes/unreachable.s 8047 7714 -333 -4.138%
Text size regressions are rare.
Change-Id: Ic10982bbb04876250eaa5bfee97990141ae5fc28
Reviewed-on: https://go-review.googlesource.com/c/go/+/228106
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
In the dev.link branch we continued developing the new object
file format support and the linker improvements described in
https://golang.org/s/better-linker . Since the last merge, more
progress has been made to improve the new linker.
This is a clean merge, as we already merged master branch to
dev.link first.
Change-Id: I1fef2b1d94bd2410001142da8991544da5ee896d
ascompatee does not generate 'x = x' during return, so we don't have to
check for samelist and disguising special return anymore.
While at it, also remove samelist, as this is the only place it's used.
Passes toolstash-check.
Change-Id: I41c7b077d562aadb5916a61e2ab6229bae3cdef4
Reviewed-on: https://go-review.googlesource.com/c/go/+/227807
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Currently this CL has no effect because V == x.typ in the affected
code. But if we should ever manipulate V (e.g., to support some form
of lazy evaluation of the type), not using V consistently would
lead to a subtle bug.
Change-Id: I465e72d18bbd2b6cd8fcbd746e0d28d14f758c03
Reviewed-on: https://go-review.googlesource.com/c/go/+/228105
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Quote original values passed as substring of ParseError.Message.
Improves the user experience of ParseDuration by making it
quote its original argument, for example:
_, err := time.ParseDuration("for breakfast")
will now produce an error, which when printed out is:
time: invalid duration "for breakfast"
instead of:
time: invalid duration for breakfast
Adapt test cases for format.Parse and format.ParseDuration.
Fixes#38295
Change-Id: Ife322c8f3c859e1e4e8dd546d4cf0d519b4bfa81
Reviewed-on: https://go-review.googlesource.com/c/go/+/227878
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts CL 224588.
Reason for revert: Test failing on secondary platforms.
Change-Id: Ic15fdc73a0d2b860e776733abb82c58809e13160
Reviewed-on: https://go-review.googlesource.com/c/go/+/228200
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- CopyN: 5 creates ambiguity with respect to whitespace and upperbound
- TeeReader less boilerplate and displays a common usage of it
- SectionReader_* all sections unified to 5:17 for clarity
- SectionReader_Seek uses io.Copy to stdout like other examples
- Seeker_Seek remove useless prints
- Pipe print reader like other examples
Updates #36417
Change-Id: Ibd01761d5a5786cdb1ea934f7a98f8302430c8a5
GitHub-Last-Rev: 4c17f9a8e3
GitHub-Pull-Request: golang/go#38379
Reviewed-on: https://go-review.googlesource.com/c/go/+/227868
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
We split the output into blocks and write them in parallel. The
block boundary is placed at symbol boundary. In the case of outer
symbols and sub symbols, currently we may split an outer symbol
into two blocks. This will be bad, as the two blocks will have
overlapping address range, since outer symbol and its sub symbols
occupies the same address range.
Make sure we place block boundary only at top-level symbol
boundaries.
Fix boringcrypto build.
Change-Id: I56811d3969c65c6be97672d8e1f1ea36b2447465
Reviewed-on: https://go-review.googlesource.com/c/go/+/227957
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
(cherry picked from commit 636fa3148f)
Reviewed-on: https://go-review.googlesource.com/c/go/+/228138
If -d=ssa/PASS/debug=N is specified (N >= 2) for a rewrite pass
(e.g. lower), when a Value (or Block) is rewritten, print the
Value (or Block) before and after.
For #31915.
Updates #19013.
Change-Id: I80eadd44302ae736bc7daed0ef68529ab7a16776
Reviewed-on: https://go-review.googlesource.com/c/go/+/176718
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Importing the time/tzdata package will embed a copy of the IANA
timezone database into the program. This will let the program work
correctly when the timezone database is not available on the system.
It will increase the size of the binary by about 800K.
You can also build a program with -tags timetzdata to embed the
timezone database in the program being built.
Fixes#21881Fixes#38013Fixes#38017
Change-Id: Iffddee72a8f46c95fee3bcde43c142d6899d9246
Reviewed-on: https://go-review.googlesource.com/c/go/+/224588
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Following CL 226818, the compiler will allow inlining a single cycle in
an inline chain. Immediately-recursive functions are still disallowed,
which is what this heuristic refers to.
Add a regression test for this case.
Note that in addition to this check, if the compiler were to inline
multiple cycles via a loop (i.e., rather than appending duplicate code),
much more work would be required here to handle a single address
appearing in multiple different inline frames.
Updates #29737
Change-Id: I88de15cfbeabb9c04381e1c12cc36778623132a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/227346
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
TestTryAdd is particularly brittle because it tests some real cases by
constructing fake sample stack frames. If those frames don't correctly
represent what the runtime would generate then they may fail to catch
regressions.
Instead, call runtime.Callers at the bottom of real function calls to
generate real frames as a base for truncation, etc in tests. Several of
these tests still have to fake parts of the frames to test the right
thing, but this is a bit less fragile.
This change is equivalent to the original
0dfb0513ec (golang.org/cl/227484), except
that the test skips if the test functions aren't inline (e.g., noopt
builders).
Change-Id: Ie9e32b5660cfe28a924f9cfcddcd887ea2effd66
Reviewed-on: https://go-review.googlesource.com/c/go/+/227922
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The parameter name is dt, not t. Also, line-wrap the godoc comment.
Change-Id: Ie012d2a5680525b88e244a3380d72bc4f61da8e7
Reviewed-on: https://go-review.googlesource.com/c/go/+/228058
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matt Layher <mdlayher@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It is no longer used. The only remaining use is in generating
Plan 9 debug info, which is already not supported.
Change-Id: Ia023d6f2fa7d57b97ba861ce464e2eec8ac2d1f5
Reviewed-on: https://go-review.googlesource.com/c/go/+/228142
Reviewed-by: Than McIntosh <thanm@google.com>
lib.Textp was used for text address assignment and trampoline
insertion. Now that it has been converted to using the loader,
no need to populate lib.Textp.
Port the logic of canonicalizing dupok symbol's package to the
loader.
unit.Textp was used for DWARF generation, which has also been
converted to using the loader.
Change-Id: I22d4dd30a52a29dd5b1b7b795d43a19f6215e4ac
Reviewed-on: https://go-review.googlesource.com/c/go/+/228140
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
