In the past, cgo generated Go code and C code. The C code was linked
into a shared library. The Go code was built into an executable that
dynamically linked against that shared library. C wrappers were
exported from the shared library, and the Go code called them.
It was all a long time ago, but in order to permit C code to call back
into Go, somebody implemented #pragma dynexport (https://golang.org/cl/661043)
to export a Go symbol into the dynamic symbol table. Then that same
person added code to cgo to recognize //export comments
(https://golang.org/cl/853042). The //export comments were implemented
by generating C code, to be compiled by GCC, that would refer to C code,
to be compiled by 6c, that would call the Go code. The GCC code would
go into a shared library. The code compiled by 6c would be in the Go
executable. The GCC code needed to refer to the 6c code, so the 6c
function was marked with #pragma dynexport. The important point here is
that #pragma dynexport was used to expose an internal detail of the
implementation of an exported function, because at the time it was
necessary.
Moving forward to today, cgo no longer generates a shared library and 6c
no longer exists. It's still true that we have a function compiled by
GCC that refers to a wrapper function now written in Go. In the normal
case today we are doing an external link, and we use a
//go:cgo_export_static function to make the Go wrapper function visible
to the C code under a known name.
The #pragma dynexport statement has become a //go:cgo_export_dynamic
comment on the Go code. That comment only takes effect when doing
internal linking. The comment tells the linker to put the symbol in the
dynamic symbol table. That still makes sense for the now unusual case
of using internal linking with a shared library.
However, all the changes to this code have carefully preserved the
property that the //go:cgo_export_dynamic comment refers to an internal
detail of the implementation of an exported function. That was
necessary a long time ago, but no longer makes sense.
This CL changes the code to put the actual C-callable function into the
dynamic symbol table. I considered dropping the comment entirely, but
it turns out that there is even a test for this, so I preserved it.
Change-Id: I66a7958e366e5974363099bfaa6ba862ca327849
Reviewed-on: https://go-review.googlesource.com/17061
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
If you set GODEBUG=cgocheck=2 the runtime package will use the write
barrier to detect cases where a Go program writes a Go pointer into
non-Go memory. In conjunction with the existing cgo checks, and the
not-yet-implemented cgo check for exported functions, this should
reliably detect all cases (that do not import the unsafe package) in
which a Go pointer is incorrectly shared with C code. This check is
optional because it turns on the write barrier at all times, which is
known to be expensive.
Update #12416.
Change-Id: I549d8b2956daa76eac853928e9280e615d6365f4
Reviewed-on: https://go-review.googlesource.com/16899
Reviewed-by: Russ Cox <rsc@golang.org>
Change the linker to use a copy of the C compiler support library,
libgcc.a, when doing internal linking. This will be used to satisfy any
undefined symbols referenced by host objects.
Change the dist tool to copy the support library into a new directory
tree under GOROOT/pkg/libgcc. This ensures that libgcc is available
even when building Go programs on a system that has no C compiler. The
C compiler is required when building the Go installation in the first
place, but is not required thereafter.
Change the go tool to not link libgcc into cgo objects.
Correct the linker handling of a weak symbol in an ELF input object to
not always create a new symbol, but to use an existing symbol if there
is one; this is necessary on freebsd-amd64, where libgcc contains a weak
definition of compilerrt_abort_impl.
Fixes#9510.
Change-Id: I1ab28182263238d9bcaf6a42804e5da2a87d8778
Reviewed-on: https://go-review.googlesource.com/16741
Reviewed-by: Russ Cox <rsc@golang.org>
I keep losing this utility, used as part of other tools to auto-update
the AUTHORS and CONTRIBUTORS files. Check it in to the repo so I
don't lose it, and so others can use it as well.
Updates #12042
Change-Id: Ib5886b85799087aaaddcec4c81169e2726322c05
Reviewed-on: https://go-review.googlesource.com/16824
Reviewed-by: Russ Cox <rsc@golang.org>
The runtime is not instrumented, but the calls to msanread in the
runtime can sometimes refer to the system stack. An example is the call
to copy in stkbucket in mprof.go. Depending on what C code has done,
the system stack may appear uninitialized to msan.
Change-Id: Ic21705b9ac504ae5cf7601a59189302f072e7db1
Reviewed-on: https://go-review.googlesource.com/16660
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is a fix for the -msan option when using cgo callbacks. A cgo
callback works by writing out C code that puts a struct on the stack and
passes the address of that struct into Go. The result parameters are
fields of the struct. The Go code will write to the result parameters,
but the Go code thinks it is just writing into the Go stack, and
therefore won't call msanwrite. This CL adds a call to msanwrite in the
cgo callback code so that the C knows that results were written.
Change-Id: I80438dbd4561502bdee97fad3f02893a06880ee1
Reviewed-on: https://go-review.googlesource.com/16611
Reviewed-by: David Crawshaw <crawshaw@golang.org>
When using gccgo it's OK if a pointer passed to C remains on the stack.
Gccgo does not have the clear distinction between C and Go stacks.
Change-Id: I3af9dd6fe078214ab16d9d8dad2d206608d7891d
Reviewed-on: https://go-review.googlesource.com/16774
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
This implements part of the proposal in issue 12416 by adding dynamic
checks for passing pointers from Go to C. This code is intended to be
on at all times. It does not try to catch every case. It does not
implement checks on calling Go functions from C.
The new cgo checks may be disabled using GODEBUG=cgocheck=0.
Update #12416.
Change-Id: I48de130e7e2e83fb99a1e176b2c856be38a4d3c8
Reviewed-on: https://go-review.googlesource.com/16003
Reviewed-by: Russ Cox <rsc@golang.org>
This is, in effect, what the gc toolchain does. It fixes cases where Go
code refers to a C global variable; without this, if the global variable
was the only thing visible in the C code, the generated cgo file might
not get pulled in from the archive, leaving the Go variable
uninitialized.
This was reported against gccgo as https://gcc.gnu.org/PR68255 .
Change-Id: I3e769dd174f64050ebbff268fbbf5e6fab1e2a1b
Reviewed-on: https://go-review.googlesource.com/16775
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
And enable PIE in cmd/go because that's all it seems to take.
Change-Id: Ie017f427ace5e91de333a9f7cba9684c4641dfd5
Reviewed-on: https://go-review.googlesource.com/14222
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The current mechanism fails if clang cannot be executed by the current
user. Using the `-x` operator for `test` return TRUE if the file is
executable by the user.
Change-Id: I0f3c8dc3880c1ce5a8a833ff3109eb96853184af
Reviewed-on: https://go-review.googlesource.com/16752
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The existing go_darwin_arm_exec.go script does not work with Xcode 7,
not due to any significant changes, but just ordering and timing of
statements from lldb. Unfortunately the current design of
go_darwin_arm_exec.go makes it not obvious what gets stuck where, so
this moves from a moving buffer window to a complete buffer of the
lldb output.
The result is easier code to follow, and it works with Xcode 7.
Updates #12660.
Change-Id: I3b8b890b0bf4474119482e95d84e821a86d1eaed
Reviewed-on: https://go-review.googlesource.com/16634
Reviewed-by: Michael Matloob <matloob@golang.org>
The width of the type of an external variable defined with a type
literal may not be set when the instrumentation pass is run. There are
two cases in the standard library that fail without the call to dowidth:
../../../src/encoding/base32/base32.go:322: constant -1000000000 overflows uintptr
../../../src/encoding/base32/base32.go:329: constant -1000000000 overflows uintptr
../../../src/encoding/json/encode.go:385: constant -1000000000 overflows uintptr
../../../src/encoding/json/encode.go:387: constant -1000000000 overflows uintptr
Change-Id: I7c3334f7decdb7488595ffe4090cd262d7334283
Reviewed-on: https://go-review.googlesource.com/16331
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
On older versions of GCC we need to pass a file name before GCC will
report an unrecognized option.
Fixes#13065.
Change-Id: I7ed34c01a006966a446059025f7d10235c649072
Reviewed-on: https://go-review.googlesource.com/16589
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The error message should indicate the name of the unset variable,
rather than the value. The value will alwayse be empty.
Change-Id: I6f6c165074dfce857b6523703a890d205423cd28
Reviewed-on: https://go-review.googlesource.com/16555
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Depends on external linking right now. I have no immediate use for
this, but wanted to check how hard it is to support as android/amd64
is coming and it will require PIE.
Change-Id: I65c6b19159f40db4c79cf312cd0368c2b2527bfd
Reviewed-on: https://go-review.googlesource.com/16072
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also fix the msan_fail test. It was bogus, since it always aborted one
way or another.
Change-Id: Ic693327d1bddb7bc5c7d859ac047fc93cb9b5b1c
Reviewed-on: https://go-review.googlesource.com/16172
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The -msan option compiles Go code to use the memory sanitizer. This is
intended for use when linking with C/C++ code compiled with
-fsanitize=memory. When memory blocks are passed back and forth between
C/C++ and Go, code in both languages will agree as to whether the memory
is correctly initialized or not, and will report errors for any use of
uninitialized memory.
Change-Id: I2dbdbd26951eacb7d84063cfc7297f88ffadd70c
Reviewed-on: https://go-review.googlesource.com/16169
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Replace the confusing game where a frame size of $-8 would suppress the
implicit setting up of a stack frame with a nice explicit flag.
The code to set up the function prologue is still a little confusing but better
than it was.
Change-Id: I1d49278ff42c6bc734ebfb079998b32bc53f8d9a
Reviewed-on: https://go-review.googlesource.com/15670
Reviewed-by: Minux Ma <minux@golang.org>
Also, handle the case where 'read' returns EINVAL instead of EBADF
when the descriptor is not ready. (android 4.4.4/cyanogenmod, nexus7)
Change-Id: I56c5949d27303d44a4fd0de38951b85e20cef167
Reviewed-on: https://go-review.googlesource.com/15810
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes these warnings from go vet:
buildid_linux.go:25: no formatting directive in Fatalf call
callback.go:180: arg pc[i] for printf verb %p of wrong type: uintptr
env.go:34: possible misuse of unsafe.Pointer
issue7665.go:22: possible misuse of unsafe.Pointer
Change-Id: I83811b9c10c617139713a626b4a34ab05564d4fe
Reviewed-on: https://go-review.googlesource.com/15802
Reviewed-by: David Crawshaw <crawshaw@golang.org>
cgo panics in Package.rewriteRef for:
var a = C.enum_test(1)
or
p := new(C.enum_test)
when the corresponding enum type is not defined.
Check nil values for Type fields and issue a proper
error instead.
Fixes#11097
Updates #12160
Change-Id: I5821d29097ef0a36076ec5273125b09846c7d832
Reviewed-on: https://go-review.googlesource.com/15264
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The memory sanitizer (msan) is a nice compiler feature that can
dynamically check for memory errors in C code. It's not useful for Go
code, since Go is memory safe. But it is useful to be able to use the
memory sanitizer on C code that is linked into a Go program via cgo.
Without this change it does not work, as msan considers memory passed
from Go to C as uninitialized.
To make this work, change the runtime to call the C mmap function when
using cgo. When using msan the mmap call will be intercepted and marked
as returning initialized memory.
Work around what appears to be an msan bug by calling malloc before we
call mmap.
Change-Id: I8ab7286d7595ae84782f68a98bef6d3688b946f9
Reviewed-on: https://go-review.googlesource.com/15170
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Glibc uses some special signals for special thread operations. These
signals will be used in programs that use cgo and invoke certain glibc
functions, such as setgid. In order for this to work, these signals
need to not be masked by any thread. Before this change, they were
being masked by programs that used os/signal.Notify, because it
carefully masks all non-thread-specific signals in all threads so that a
dedicated thread will collect and report those signals (see ensureSigM
in signal1_unix.go).
This change adds the two glibc special signals to the set of signals
that are unmasked in each thread.
Fixes#12498.
Change-Id: I797d71a099a2169c186f024185d44a2e1972d4ad
Reviewed-on: https://go-review.googlesource.com/14297
Reviewed-by: David Crawshaw <crawshaw@golang.org>
It's because runtime links to ntdll, and ntdll exports a couple
incompatible libc functions. We must link to msvcrt first and
then try ntdll.
Fixes#12030.
Change-Id: I0105417bada108da55f5ae4482c2423ac7a92957
Reviewed-on: https://go-review.googlesource.com/14472
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently Go produces shared libraries that cannot be shared between processes
because they have relocations against the text segment (not text section). This
fixes this by moving some data to sections with magic names recognized by the
static linker.
The change in genasmsym to add STYPELINK to the switch should fix things on
darwin/arm64.
Fixes#10914
Updates #9210
Change-Id: Iab4a6678dd04cec6114e683caac5cf31b1063309
Reviewed-on: https://go-review.googlesource.com/14306
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts commit 2c2cbb69c8.
Broke darwin/arm64
Change-Id: Ibd2dea475d6ce6a8b4b40e2da19a83fc0514025d
Reviewed-on: https://go-review.googlesource.com/14301
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently Go produces shared libraries that cannot be shared between processes
because they have relocations against the text segment (not text section). This
fixes this by moving some data to sections with magic names recognized by the
static linker.
Fixes#10914
Updates #9210
Change-Id: I7178daadc0ae87953d5a084aa3d580f4e3b46d47
Reviewed-on: https://go-review.googlesource.com/10300
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#12083
Change-Id: I8256739b33cf08d84dec23120d527667de2e6eea
Reviewed-on: https://go-review.googlesource.com/13822
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In order to fix issue #9401 the compiler was changed to add a padding
byte to any non-empty Go struct that ends in a zero-sized field. That
causes the Go version of such a C struct to have a different size than
the C struct, which can considerable confusion. Change cgo so that it
discards any such zero-sized fields, so that the Go and C structs are
the same size.
This is a change from previous releases, in that it used to be
possible to refer to a zero-sized trailing field (by taking its
address), and with this change it no longer is. That is unfortunate,
but something has to change. It seems better to visibly break
programs that do this rather than to silently break programs that rely
on the struct sizes being the same.
Update #9401.
Fixes#11925.
Change-Id: I3fba3f02f11265b3c41d68616f79dedb05b81225
Reviewed-on: https://go-review.googlesource.com/12864
Reviewed-by: Russ Cox <rsc@golang.org>
This is now superseded by golang.org/x/build/cmd/release.
Fixes#8472
Change-Id: I59664d84996a0fbb5c90582a4702714b3b3cf302
Reviewed-on: https://go-review.googlesource.com/12500
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is mostly Russ's https://golang.org/cl/12145 but with some extra fixes to
account for the fact that function declarations without implementations now
break shared libraries, and including my test case.
Fixes#11480.
Change-Id: Iabdc2934a0378e5025e4e7affadb535eaef2c8f1
Reviewed-on: https://go-review.googlesource.com/12340
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The one in misc/makerelease/makerelease.go is particularly bad and
probably warrants rotating our keys.
I didn't update old weekly notes, and reverted some changes involving
test code for now, since we're late in the Go 1.5 freeze. Otherwise,
the rest are all auto-generated changes, and all manually reviewed.
Change-Id: Ia2753576ab5d64826a167d259f48a2f50508792d
Reviewed-on: https://go-review.googlesource.com/12048
Reviewed-by: Rob Pike <r@golang.org>
Integrate the latest trace-viewer changes.
It now handles nanoseconds without any issues (thanks to @egonelbre!).
So change timestamps from microseconds to nanoseconds.
Change-Id: I010f27effde7e80c9992e6f276f6912354d27df4
Reviewed-on: https://go-review.googlesource.com/11244
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Egon Elbre <egonelbre@gmail.com>
Refactor main a bit to make it possible to run tests without an exec every time.
(Makes a huge difference in run time.)
Add a silver test. Not quite golden, since it looks for pieces rather than the
full output, and also includes tests for what should not appear.
Fixes#10920.
Change-Id: I6a4951cc14e61763379754a10b0cc3484d30c267
Reviewed-on: https://go-review.googlesource.com/11272
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Rob Pike <r@golang.org>
All of the heavy-lifting was done by minux@, with his external-linking support
for darwin/arm64: golang.org/cl/8781
Change-Id: I7c9fbc19246f418c065c92fb2c13c00026ff0f82
Reviewed-on: https://go-review.googlesource.com/11127
Run-TryBot: Srdjan Petrovic <spetrovic@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Adjust timestamps in TestABIChecking to make sure that the library and
executable are rebuilt when expected.
Change-Id: I3288c254ba8201b5b4255347b0cb056fa0908657
Reviewed-on: https://go-review.googlesource.com/11128
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Yves Junqueira <yves.junqueira@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
