Go 1.6 is soon (but not yet).
Fixes#14301.
Change-Id: I85e329b643adcb5d4fa680c5333fbc1f928d4d9d
Reviewed-on: https://go-review.googlesource.com/19550
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
Fixes#13651.
Change-Id: I1d21b49e2b5bc6c507eb084d6d2553e5a9c607cf
Reviewed-on: https://go-review.googlesource.com/19552
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
Go 1.6 significantly improves pause times for large heaps, but it
improves them in many other situations as well, such as when goroutine
churn is high, allocation rate is high, or when there are many
finalizers. Hence, make the statement about pause times a bit more
general.
Change-Id: Ic034b1c904c39dd1d966ee7fa96ca8bbb3614e53
Reviewed-on: https://go-review.googlesource.com/19504
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently we use "Section's" as the plural of the debug/elf Section
struct. Change this to "Sections" because it's not possessive and
doesn't seem to fall in to any special cases were the apostrophe is
acceptable.
Change-Id: Id5d3abbd748502a67ead3f483182ee7729db94a2
Reviewed-on: https://go-review.googlesource.com/19505
Reviewed-by: Russ Cox <rsc@golang.org>
The plan9.bell-labs.com site has fallen into disrepair.
We'll instead use the site maintained by contributor David du Colombier.
Fixes#14233
Change-Id: I0c702e5d3b091cccd42b288ea32f34d507a4733d
Reviewed-on: https://go-review.googlesource.com/19240
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>
Also fix a few bad links.
Change-Id: If04cdd312db24a827a3c958a9974c50ab148656c
Reviewed-on: https://go-review.googlesource.com/18979
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes#13954
Change-Id: I4c01e9bb3fb08e8b9fa14d4c59b7ea824ba3f0c9
Reviewed-on: https://go-review.googlesource.com/18937
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Consider this code:
func f(*int)
func g() {
p := new(int)
f(p)
}
where f is an assembly function.
In general liveness analysis assumes that during the call to f, p is dead
in this frame. If f has retained p, p will be found alive in f's frame and keep
the new(int) from being garbage collected. This is all correct and works.
We use the Go func declaration for f to give the assembly function
liveness information (the arguments are assumed live for the entire call).
Now consider this code:
func h1() {
p := new(int)
syscall.Syscall(1, 2, 3, uintptr(unsafe.Pointer(p)))
}
Here syscall.Syscall is taking the place of f, but because its arguments
are uintptr, the liveness analysis and the garbage collector ignore them.
Since p is no longer live in h once the call starts, if the garbage collector
scans the stack while the system call is blocked, it will find no reference
to the new(int) and reclaim it. If the kernel is going to write to *p once
the call finishes, reclaiming the memory is a mistake.
We can't change the arguments or the liveness information for
syscall.Syscall itself, both for compatibility and because sometimes the
arguments really are integers, and the garbage collector will get quite upset
if it finds an integer where it expects a pointer. The problem is that
these arguments are fundamentally untyped.
The solution we have taken in the syscall package's wrappers in past
releases is to insert a call to a dummy function named "use", to make
it look like the argument is live during the call to syscall.Syscall:
func h2() {
p := new(int)
syscall.Syscall(1, 2, 3, uintptr(unsafe.Pointer(p)))
use(unsafe.Pointer(p))
}
Keeping p alive during the call means that if the garbage collector
scans the stack during the system call now, it will find the reference to p.
Unfortunately, this approach is not available to users outside syscall,
because 'use' is unexported, and people also have to realize they need
to use it and do so. There is much existing code using syscall.Syscall
without a 'use'-like function. That code will fail very occasionally in
mysterious ways (see #13372).
This CL fixes all that existing code by making the compiler do the right
thing automatically, without any code modifications. That is, it takes h1
above, which is incorrect code today, and makes it correct code.
Specifically, if the compiler sees a foreign func definition (one
without a body) that has uintptr arguments, it marks those arguments
as "unsafe uintptrs". If it later sees the function being called
with uintptr(unsafe.Pointer(x)) as an argument, it arranges to mark x
as having escaped, and it makes sure to hold x in a live temporary
variable until the call returns, so that the garbage collector cannot
reclaim whatever heap memory x points to.
For now I am leaving the explicit calls to use in package syscall,
but they can be removed early in a future cycle (likely Go 1.7).
The rule has no effect on escape analysis, only on liveness analysis.
Fixes#13372.
Change-Id: I2addb83f70d08db08c64d394f9d06ff0a063c500
Reviewed-on: https://go-review.googlesource.com/18584
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Now there are ARM downloads too.
Change-Id: I236381508c69d56748e672d184b92caa715e81ae
Reviewed-on: https://go-review.googlesource.com/18342
Reviewed-by: Andrew Gerrand <adg@golang.org>
The old link died; replace with an archive.org copy.
Fixes#13345.
Change-Id: Ic4a7fdcf258e1ff3b4a02ecb4f237ae7db2686c7
Reviewed-on: https://go-review.googlesource.com/18335
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Also reference the new Transport.ExpectContinueTimeout after the
mention of 100-continue.
Fixes#13721
Change-Id: I3445c011ed20f29128092c801c7a4bb4dd2b8351
Reviewed-on: https://go-review.googlesource.com/18281
Reviewed-by: Andrew Gerrand <adg@golang.org>
Slightly rephrased sentence to emphasize the contents of the
Unicode categories w/o repeating the full category name each
time.
Fixes#13414.
Change-Id: Icd32ff1547fa81e866c5937a631c3344bb6087c6
Reviewed-on: https://go-review.googlesource.com/18265
Reviewed-by: Rob Pike <r@golang.org>
The proper term is "untyped boolean".
Change-Id: Id871164190a03c64a8a8987b1ad5d8653a21d96e
Reviewed-on: https://go-review.googlesource.com/16135
Reviewed-by: Robert Griesemer <gri@golang.org>
The spec defines precise numeric constants which do not overflow.
Consequently, +/-Inf and NaN values were excluded. The case was not
clear for -0.0 but they are mostly of interest to determine the sign
of infinities which don't exist.
That said, the conversion rules explicitly say that T(x) (for a numeric
x and floating-point type T) is the value after rounding per IEEE-754.
The result is constant if x is constant. Rounding per IEEE-754 can
produce a -0.0 which we cannot represent as a constant.
Thus, the spec is inconsistent. Attempt to fix the inconsistency by
adjusting the rounding rule rather than letting -0.0 into the language.
For more details, see the issue below.
Open to discussion.
Fixes#12576.
Change-Id: Ibe3c676372ab16d9229f1f9daaf316f761e074ee
Reviewed-on: https://go-review.googlesource.com/14727
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The prose discussing composite literals referred to the composite
literal type with 'LiteralType', denoting the literal type's EBNF
production explicitly. Changed 'LiteralType' to 'literal type' to
remove the literal (no pun intended) connection and instead mean
the underlying type. Seems a simpler and more readable change
than referring to the underlying type everywhere explicitly.
Fixes#12717.
Change-Id: I225df95f9ece2664b19068525ea8bda5ca05a44a
Reviewed-on: https://go-review.googlesource.com/14851
Reviewed-by: Rob Pike <r@golang.org>
Fixes#12288.
For inclusion in the 1.5.1 release.
Change-Id: I9354b7eaa76000498465c4a5cbab7246de9ecb7c
Reviewed-on: https://go-review.googlesource.com/14382
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Start go1.6.txt with a note that nacl ports are no longer
restricted to pepper_41 and a record of the text/template change.
Change-Id: I21dda64aec113c35caf1d565f29e3aac8171480a
Reviewed-on: https://go-review.googlesource.com/14004
Reviewed-by: Rob Pike <r@golang.org>
This makes sure the release page in the release will mention the release.
Fixes#12102.
Change-Id: I36befd7dba7ba9e70ae3335e21c8841179ac4eff
Reviewed-on: https://go-review.googlesource.com/13490
Reviewed-by: Rob Pike <r@golang.org>
