The existing code for deciding how to format defined type names is
incredibly convoluted and difficult to follow. In particular, I'm
looking at changing how Vargen works, and I couldn't tell from the
existing code whether my idea was viable.
This CL overhauls the logic to be much simpler with fewer special
cases, while overall behaving the same. A few notable intentional
differences from how the current code works:
1. The old code replaced the 'S' verb for fmtTypeGo and fmtTypeDebug
to 'v', whereas the new code leaves it alone. There's currently no
code that actually uses 'S' with these modes anyway, so it doesn't
seem important to maintain this special case. If future code wants 'v'
formatting, it should just use 'v' instead of 'S'.
2. The old code included Vargen for fmtTypeIDName mode with the 'S'
verb; but again, this functionality isn't actually used. I think it
would make sense for fmtTypeIDName to include Vargen like fmtTypeID
does (Vargen is logically part of the type's identity after all), but
that breaks tests and toolstash -cmp. So for now, this is left as a
TODO to investigate in the future.
3. The old code only added Vargen for fmtTypeID in 'v' mode when
printing types from the local package. But because we don't currently
support exporting function-scoped defined types anyway, this is again
irrelevant. In fact, once we *do* support exporting function-scoped
defined types, we'll need to include Vargen to generate the linker
symbols correctly.
Passes toolstash -cmp.
Change-Id: I4e481276bc4dc8d5b17eebf597b612737f26be5b
Reviewed-on: https://go-review.googlesource.com/c/go/+/323709
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The GoVersion field was added to types.Config as part of the work on
type parameters. Specifically, it was added to be consistent with
cmd/compile/internal/types2, which requires such an option.
This configuration option is useful, but is also non-trivial and did not
go through the proposal process. Unexport it for Go 1.17; we can create
a proposal to export it for Go 1.18.
Fixes#46296
Change-Id: Id82d8a7096887dcfc404c4d6d8da9c761b316609
Reviewed-on: https://go-review.googlesource.com/c/go/+/323430
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Documents the newly added mode that skips type checking
functions as per CL 301493.
Fixes#46025
For #34652
For #44513
For #38627
Change-Id: I56c4f65924702a931944796e39f43cfeb66abc8a
Reviewed-on: https://go-review.googlesource.com/c/go/+/311569
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Trust: Michael Knyszek <mknyszek@google.com>
For #44513
Change-Id: I8c0070b116ee520a76726eb9d3dcbdd489a1fb1f
Reviewed-on: https://go-review.googlesource.com/c/go/+/323351
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
For #44513
Change-Id: Ib21af742e574fcaa7e38bb437d42dbeed9d01f0b
Reviewed-on: https://go-review.googlesource.com/c/go/+/323350
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
The IsMethod method was added to FuncDecl in the process of working on
support for type parameters, but is now only used in one place. It also
didn't go through the proposal process. Remove it for 1.17.
Also clean up a doc comment that mentioned type parameters.
Fixes#46297
Change-Id: I432bdd626324f613baf059540b7c5436985b2b16
Reviewed-on: https://go-review.googlesource.com/c/go/+/323369
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Rather than re-parsing and re-resolving the import path string, use
the PkgName object provided by types2 to determine what package path
it refers to.
Also, decompose importfile into smaller functions, so that we can
directly pass the already-resolved package path to the importer.
Finally, switch to simply using height as calculated by types2 rather
than redoing the calculations.
Change-Id: I3338f4e68387b2835b2e58d6df65d740d6a648cb
Reviewed-on: https://go-review.googlesource.com/c/go/+/323309
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
This CL refactors mkinlcall by extracting the core InlinedCallExpr
construction code into a new "oldInline" function, and adds a new
"NewInline" hook point that can be overriden with a new inliner
implementation that only needs to worry about the details of
constructing the InlinedCallExpr.
It also moves the delayretvars optimization check into CanInline, so
it's performed just once per inlinable function rather than once for
each inlined call.
Finally, it skips printing the function body about to be inlined (and
updates the couple of regress tests that expected this output). We
already report the inline body as it was saved, and this diagnostic is
only applicable to the current inliner, which clones existing function
body instances. In the unified IR inliner, we'll directly construct
inline bodies from the serialized representation.
Change-Id: Ibdbe617da83c07665dcbda402cc8d4d4431dde2f
Reviewed-on: https://go-review.googlesource.com/c/go/+/323290
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
15 more tests are passing from recent changes. 83 still to go.
Change-Id: I155b3e3db966d604ccec8bf3a7c182421f3d26c4
Reviewed-on: https://go-review.googlesource.com/c/go/+/323211
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This CL adds ir.RawOrigExpr, which can be used to represent arbitrary
constant expressions without needing to build and carry around an
entire IR representation of the original expression. It also allows
distinguishing how the constant was originally written by the
user (e.g., "0xff" vs "255").
This CL then also updates irgen to make use of this functionality for
expressions that were constant folded by types2.
Change-Id: I41e04e228e715ae2735c357b75633a2d08ee7021
Reviewed-on: https://go-review.googlesource.com/c/go/+/323210
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
This CL makes a handful of changes to either bring existing compiler
output consistent with what types2 produces or to make it easier to
reproduce with types2:
1. The position for embedded fields is corrected to the position of
the syntax.Field, rather than the syntax.Type.
2. Methods and embedded types are sorted in export data the same way
that types2 sorts them.
3. Don't write out position information for OLITERALs that don't have
their own position (i.e., references to named constants).
Change-Id: Ic3979215ae9ef280cfbba7b44c236e03fc12a2ef
Reviewed-on: https://go-review.googlesource.com/c/go/+/323209
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
The documentation of the Client.Do method and Get function incorrectly
stated that, in case of context cancelation, the returned url.Error
Timeout method returns true.
Update the documentation to correctly match the implementation.
See also CL 200798 that, due to an oversight, corrected only the
documentation of the Client.Get method.
Remove a TODO note added in CL 125575 (net/http: document that Client
methods always return *url.Error), since it is no longer applicable
after CL 200798 (net/http: fix and lock-in Client.Do docs on request
cancelation).
Fixes#46402
Change-Id: Ied2ee971ba22b61777762dbb19f16e08686634ca
Reviewed-on: https://go-review.googlesource.com/c/go/+/323089
Reviewed-by: Damien Neil <dneil@google.com>
Trust: Michael Knyszek <mknyszek@google.com>
For #44513.
Fixes#46019.
Change-Id: Ica84edd5703a4ccf343ff01e10483f8d51d1c79f
Reviewed-on: https://go-review.googlesource.com/c/go/+/323069
Trust: Damien Neil <dneil@google.com>
Run-TryBot: Damien Neil <dneil@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
'go mod download' calls modload.LoadModFile early to find the main
module path in order to validate arguments. LoadModFile may write
go.mod and go.sum to fix formatting and add a go directive. This calls
keepSums, which, in eager mode, loaded the complete module graph in
order to find out what sums are needed to load the complete module
graph. If go.mod requires a lower version of a module than will be
selected later, keepSums causes the sum for that version's go.mod to
be retained, even though it isn't needed later after a consistent
go.mod is written.
This CL fixes keepSums not to load the graph if it hasn't already been
loaded (whether eager or lazy), addressing comments from CL 318629.
For #45332
Change-Id: I20d4404004e4ad335450fd0fd753e7bc0060f702
Reviewed-on: https://go-review.googlesource.com/c/go/+/322369
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
For the methods LookupCNAME, LookupSRV, LookupMX, LookupNS, and
LookupAddr check that the returned domain names are in fact valid DNS
names using the existing isDomainName function.
Thanks to Philipp Jeitner and Haya Shulman from Fraunhofer SIT for
reporting this issue.
Fixes#46241
Fixes CVE-2021-33195
Change-Id: I47a4f58c031cb752f732e88bbdae7f819f0af4f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/323131
Trust: Roland Shoemaker <roland@golang.org>
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
Write out export data with the old export format (iexportVersionPosCol)
if not compiling with generics (-G=0, the default value). This helps
ensure we don't break tests involving x/tools/go/gcexportdata (since we
can't modify that tool yet to use the new format).
Change-Id: I5f9bce44ed1e0696fc65fead6bab9e30de88461d
Reviewed-on: https://go-review.googlesource.com/c/go/+/323189
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Robert Griesemer <gri@golang.org>
During DWARF debug location generation, as a preamble to the main data
flow analysis, examine the function entry block to look for in-params
arriving in registers that are partially or completely dead, and
insert new OpArg{Int,Float}Reg values for the dead or partially-dead
pieces. In addition, add entries to the f.NamedValues table for
incoming live register-resident params that don't already have
entries. This helps create better/saner DWARF location expressions for
params. Example:
func foo(s string, used int, notused int) int {
return len(s) + used
}
When optimization is complete for this function, the parameter
"notused" is completely dead, meaning that there is no entry for it in
the f.NamedValues table (which then means we don't emit a DWARF
variable location expression for it in the function enty block). In
addition, since only the length field of "s" is used, there is no
DWARF location expression for the other component of "s", leading to
degraded DWARF.
There are still problems/issues with DWARF location generation, but
this does improve things with respect to being able to print the
values of incoming parameters when stopped in the debugger at the
entry point of a function (when optimization is enabled).
Updates #40724.
Change-Id: I5bb5253648942f9fd33b081fe1a5a36208e75785
Reviewed-on: https://go-review.googlesource.com/c/go/+/322631
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Tweak the register allocator to maintain the invariant that
OpArg{Int,Float}Reg values are placed together at the start of the
entry block, before any other non-pseudo-op values. Without this
change, when the register allocator adds spills we can wind up with an
interleaving of OpArg*Reg and stores, which complicates debug location
analysis.
Updates #40724.
Change-Id: Icf30dd814a9e25263ecbea2e48feb840a6e7f2bd
Reviewed-on: https://go-review.googlesource.com/c/go/+/322630
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Apparently C printf emits "\r\n" on Windows. Accept that.
Change-Id: If87ba41435e3147d3892cfc3fe3a105b066ff0aa
Reviewed-on: https://go-review.googlesource.com/c/go/+/322973
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
When importing generic named types, it is possible for Checker.newNamed
to be called during type instantiation when the Checker is nil.
In this case we should be able to safely skip this delayed expansion.
Updates #45580
Change-Id: I75422100464d57eba24642c93e06e8b47d904fc3
Reviewed-on: https://go-review.googlesource.com/c/go/+/322974
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Now it will be used for functions marked go:registerparams.
test/abi tests are passing with it.
Change-Id: I5af37ae6b79a1064832a42c7ef5f2cc0b5b6a342
Reviewed-on: https://go-review.googlesource.com/c/go/+/322854
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Add code that loads results into registers (used in defer return
code path) and spills argument registers (used for partially lived
in-register args).
Move some code from the amd64 package to a common place.
Change-Id: I8d59b68693048fdba86e10769c4ac58de5fcfb64
Reviewed-on: https://go-review.googlesource.com/c/go/+/322851
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
This reverts commit c89f1224a5.
Reason for revert: reverting so we can apply follow-up fixes and do a single cherry pick.
Change-Id: I16c6283a0bcab056216f330fb98fa3b5f2b0780c
Reviewed-on: https://go-review.googlesource.com/c/go/+/323129
Reviewed-by: Katie Hockman <katie@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Trust: Katie Hockman <katie@golang.org>
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Instead, check that stale packages in the standard library
are not rebuilt when already present in the build cache,
and are not installed implicitly when rebuilt.
We retain the staleness checks for the runtime package in tests
involving '-i', because those are guaranteed to fail anyway if the
package is stale and the "stale" failure message is arguably clearer.
They can be removed if/when we remove the '-i' flag, but the runtime
package is less likely to become stale because it does not have cgo
dependencies.
Fixes#46347
Updates #33598
Updates #35459
Updates #41696
Change-Id: I7b0a808addd930f9f4911ff53ded62272af75a40
Reviewed-on: https://go-review.googlesource.com/c/go/+/322629
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This CL makes to minor changes motivated by making it easier to make
large-scale changes to the inliner while satisfying toolstash -cmp:
1. When creating inlining variables, make sure to preserve the
AutoTemp flag. This is necessary so that temporary variables
introduced by rewriting f(g()) calls during typecheck stay autotemp
after inlining and are (correctly) omitted from DWARF debugging
information.
2. When sorting variables for stack frame layout, use a stable
sort. This ensures that layout is insensitive to whether deadcode
elimination happens before or after inlining.
Change-Id: I672e752a873c7e16749b9873fd6573607e074309
Reviewed-on: https://go-review.googlesource.com/c/go/+/323011
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
We already have and use FixVariadicCall to normalize non-dotted calls
to variadic functions elsewhere in the compiler to simplify rewriting
of function calls. This CL updates inl.go to use it too.
A couple tests need to be updated to (correctly) expect diagnostics
about "... argument" instead of a slice literal. This is because
inl.go previously failed to set Implicit on the slice literal node.
Change-Id: I76bd79b95ae1f16e3b26ff7e9e1c468f538fd1f0
Reviewed-on: https://go-review.googlesource.com/c/go/+/323009
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
The compiler renames anonymous and blank result parameters to ~rN or
~bN, but the current semantics for computing N are rather annoying and
difficult to reproduce cleanly. They also lead to difficult to read
escape analysis results in tests.
This CL changes N to always be calculated as the parameter's index
within the function's result parameter tuple. E.g., if a function has
a single result, it will now always be named "~r0".
The normative change to this CL is fairly simple, but it requires
updating a lot of test expectations.
Change-Id: I58a3c94de00cb822cb94efe52d115531193c993c
Reviewed-on: https://go-review.googlesource.com/c/go/+/323010
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Spill arg registers before calling morestack, and reload after.
Change-Id: I09404def321b8f935d5e8836a46ccae8256d0d55
Reviewed-on: https://go-review.googlesource.com/c/go/+/322853
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Avoid using R1, R2, etc. in function prologue, which may carry
live argument values.
Change-Id: I80322b3f7e8fda7aaff622aaa99bc76d02e09727
Reviewed-on: https://go-review.googlesource.com/c/go/+/322852
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: David Chase <drchase@google.com>
The test would hang if the call to Fd set the pipe to be non-blocking
before the Read entered the first read system call. Avoid that problem
by writing data to the pipe to wake up the read.
For #24481Fixes#44818
Change-Id: I0b798874c7b81e7308a38ebbf657efc4392ffacd
Reviewed-on: https://go-review.googlesource.com/c/go/+/322893
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
Define the registers.
They are not really enabled for now. Otherwise the compiler will
start using them for go:registerparams functions and it is not
fully working. Some test will fail.
Now we can compile a simple Add function with registerparams
(with registers enabled).
Change-Id: Ifdfac931052c0196096a1dd8b0687b5fdedb14d5
Reviewed-on: https://go-review.googlesource.com/c/go/+/322850
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
In the scheduler we have the logic that if a Value is used as the
block's control, we schedule it at the end, except for Phis and
Args. Even the comment says so, the code doesn't exclude
in-register Args (OpArgXXXReg).
Change to check for score instead, which includes OpArgXXXRegs.
It also includes GetClosurePtr, which must be scheduled early.
We just happen to never use it as block control.
Found when working on ARM64 register ABI. In theory this could
apply to AMD64 as well. But on AMD64 we never use in-register
Value as block control, as conditional branch is always based on
FLAGS, never based on registers, so it doesn't actually cause any
problem.
Change-Id: I167a550309772639574f7468caf91bd805eb74c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/322849
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: David Chase <drchase@google.com>
Change-Id: Ib34984a6bd0abc76266e8aac96f9f8ad8ae21d17
Reviewed-on: https://go-review.googlesource.com/c/go/+/322894
Trust: Damien Neil <dneil@google.com>
Run-TryBot: Damien Neil <dneil@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#46023
Change-Id: Ia63829d03afb0936862b16f0971175cbaa1095bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/322890
Trust: Damien Neil <dneil@google.com>
Run-TryBot: Damien Neil <dneil@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #44513.
Fixes#46013.
Change-Id: I382603208aa94b66d5220cf0f418b8528a4e4148
Reviewed-on: https://go-review.googlesource.com/c/go/+/322892
Trust: Damien Neil <dneil@google.com>
Run-TryBot: Damien Neil <dneil@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Always generate (*T).M wrappers for instantiated methods, even when the
instantiated method is being generated for another package (its source
package)
Added new function t.IsInstantiated() to check for fully-instantiated
types (generic type instantiated with concrete types, hence concrete
themselves). This function helps hide the representation of instantiated
types outside of the types package.
Added new export/import test setsimp.go that needs this change.
Change-Id: Ifb700db8c9494e1684c93735edb20f4709be5f7f
Reviewed-on: https://go-review.googlesource.com/c/go/+/322193
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Generic types can the source type of a type alias, so modify g.typ0() to
be able to deal with base generic types.
Added test aliasimp.go that tests aliasing of local generic types and
imported generic types.
Change-Id: I1c398193819d47a36b014cc1f9bb55107e9a565b
Reviewed-on: https://go-review.googlesource.com/c/go/+/322194
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This CL updates noder and typecheck to avoid a couple of instances of
redundant evaluation of type expressions:
1. When noding struct fields or parameter tuples, check for
syntax.Type reuse between adjacent fields and then reuse the
corresponding ir.Node type expression. It would perhaps be even better
to avoid re-noding the type expression too, but noder's days are
numbered anyway, so I'd rather be minimally invasive here.
2. When importing an empty interface, reuse the same cached empty
interface instance that is used for empty interfaces that appear in
source. This matches types2's behavior, which uses a single
types2.Interface instance for all empty interfaces.
These changes are motivated by making it possible to migrate from
typecheck to types2 while passing toolstash -cmp.
Updates #46208.
Change-Id: Ia6458894494464d863181db356f3284630c90ffe
Reviewed-on: https://go-review.googlesource.com/c/go/+/320789
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
