This CL makes resolveInternetAddr return a list of addresses that
contain a pair of different address family IP addresses if possible,
but doesn't contain any API behavioral changes yet. A simple IP
address selection mechanism for Resolve{TCP,UDP,IP}Addr and Dial API
still prefers IPv4.
This is in preparation for TCP connection setup with fast failover on
dual IP stack node as described in RFC 6555.
Update #3610
Update #5267
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/13374043
This CL adds a new type addrList that will carry a short list of IP
addresses to dial helper functions in the upcoming CLs.
This is in preparation for TCP connection setup with fast failover on
dual IP stack node as described in RFC 6555.
Update #3610
Update #5267
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/13241046
This CL adds the netaddr interface that will carry a single network
endpoint address or a short list of IP addresses to dial helper
functions in the upcoming CLs.
This is in preparation for TCP connection setup with fast failover on
dual IP stack node as described in RFC 6555.
Update #3610
Update #5267
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/13368044
Just forgot to include this in CL 12843043.
Also consolidates the code dealing with test environment.
Update #6122
R=alex.brainman
CC=golang-dev
https://golang.org/cl/13184043
RFC 6265 allows a leading dot in a cookie domain attribute
but is clear (see section 4.1.1) that a Set-Cookie header
should be sent without these dots.
R=bradfitz
CC=golang-dev
https://golang.org/cl/13111043
Also avoids platform-dependent datagram truncation in raw IP tests.
At least it's different between Windows and others.
Fixes#6122.
R=alex.brainman
CC=golang-dev
https://golang.org/cl/12843043
This CL adds minimal information for supporting platforms that don't
have a complete list of internet protocol numbers.
Fixes#5344.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/12898045
The net package consists of thin three layers like the follwoing;
- Exposed API, that contains net.Dial, net.DialUDP, net.DialUnix
- Socket and network file descriptor, that contains net.netFD and
its methods, helper functions such as dialUDP, dialUnix
- Network pollster, that contains net.pollDesc and its methods
This CL removes redundant argument check which is already done by
API layer.
R=golang-dev, dave, bradfitz
CC=golang-dev
https://golang.org/cl/13092043
Update #5000
Should reduce the flakiness a little. Malloc counting is important
to general testing but not to the build dashboard, which uses -short.
R=golang-dev, dsymonds
CC=golang-dev
https://golang.org/cl/12866047
The limit is 500. There is no way to change it.
This primarily affects name resolution.
If a million goroutines try to resolve DNS names,
only 500 will get to execute cgo calls at a time.
But in return the operating system will not crash.
Fixes#5625.
R=golang-dev, dan.kortschak, r, dvyukov
CC=bradfitz, golang-dev
https://golang.org/cl/13038043
Also start of some test helper unification, long overdue.
I refrained from cleaning up the rest in this CL.
Fixes#6157
R=golang-dev, adg
CC=golang-dev
https://golang.org/cl/13030043
This CL rearranges the call order for raw networking primitives like
the following;
- For dialers that open active connections, pollDesc.Init will be
called before syscall.Connect.
- For stream listeners that open passive stream connections,
pollDesc.Init will be called just after syscall.Listen.
- For datagram listeners that open datagram connections,
pollDesc.Init will be called just after syscall.Bind.
This is in preparation for runtime-integrated network pollster for BSD
variants.
Update #5199
R=golang-dev, alex.brainman
CC=golang-dev
https://golang.org/cl/12730043
Just for readability reasons; to prevent overlooking deadline stuff
across over platforms.
R=golang-dev, dvyukov
CC=golang-dev
https://golang.org/cl/8656044
Malformed domain attributes are not sent in a Set-Cookie header.
Instead the domain attribute is dropped which turns the cookie
into a host-only cookie. This is much safer than dropping characters
from domain attribute.
Domain attributes with a leading dot '.' are still allowed, even
if discouraged by RFC 6265 section 4.1.1.
Fixes#6013
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/12745043
Probably we should remove this type before Go 1 contract has settled,
but too late. Instead, keep InvalidAddrError close to package generic
error types.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/12670044
lookup_plan9.go's lookupSRV is using the wrong order for srv results. order should be weight, priority, port, following the response from /net/dns:
chi Aug 9 20:31:13 Rread tag 20 count 61 '_xmpp-client._tcp.offblast.org srv 5 0 5222 iota.offblast.org' 72
R=golang-dev, bradfitz
CC=ality, golang-dev, r, rsc
https://golang.org/cl/12708043
The mutex, fdMutex, handles locking and lifetime of sysfd,
and serializes Read and Write methods.
This allows to strip 2 sync.Mutex.Lock calls,
2 sync.Mutex.Unlock calls, 1 defer and some amount
of misc overhead from every network operation.
On linux/amd64, Intel E5-2690:
benchmark old ns/op new ns/op delta
BenchmarkTCP4Persistent 9595 9454 -1.47%
BenchmarkTCP4Persistent-2 8978 8772 -2.29%
BenchmarkTCP4ConcurrentReadWrite 4900 4625 -5.61%
BenchmarkTCP4ConcurrentReadWrite-2 2603 2500 -3.96%
In general it strips 70-500 ns from every network operation depending
on processor model. On my relatively new E5-2690 it accounts to ~5%
of network op cost.
Fixes#6074.
R=golang-dev, bradfitz, alex.brainman, iant, mikioh.mikioh
CC=golang-dev
https://golang.org/cl/12418043
Unlike the existing net package own pollster, runtime-integrated
network pollster on BSD variants, actually kqueue, requires a socket
that has beed passed to syscall.Listen previously for a stream
listener.
This CL separates pollDesc.Init of Unix network pollster from newFD
to avoid any breakages in the transition from Unix network pollster
to runtime-integrated pollster. Upcoming CLs will rearrange the call
order of pollster and syscall functions like the following;
- For dialers that open active connections, pollDesc.Init will be
called in between syscall.Bind and syscall.Connect.
- For stream listeners that open passive stream connections,
pollDesc.Init will be called just after syscall.Listen.
- For datagram listeners that open datagram connections,
pollDesc.Init will be called just after syscall.Bind.
This is in preparation for runtime-integrated network pollster for BSD
variants.
Update #5199
R=dvyukov, bradfitz
CC=golang-dev
https://golang.org/cl/12663043
Having a trailing dot in the string doesn't really simplify
the checking loop in isDomainName. Avoid this unnecessary allocation.
Also make the valid domain names more explicit by adding some more
test cases.
benchmark old ns/op new ns/op delta
BenchmarkDNSNames 2420.0 983.0 -59.38%
benchmark old allocs new allocs delta
BenchmarkDNSNames 12 0 -100.00%
benchmark old bytes new bytes delta
BenchmarkDNSNames 336 0 -100.00%
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/12662043
The ResponseWriter's ReadFrom method was causing side effects on
the output before any data was read.
Now, bail out early and do a normal copy (which does a read
before writing) when our input and output are known to not to
be the pair of types we need for sendfile.
Fixes#5660
R=golang-dev, rsc, nightlyone
CC=golang-dev
https://golang.org/cl/12632043
There were some issues with the code sometimes using base64.StdEncoding,
and sometimes base64.URLEncoding.
Encoding basic authentication is now always done by the same code.
Fixes#5970.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/12397043
HTTP/1.0 connections are closed implicitly, unless otherwise specified.
Note that this change does not test or fix "request too large" responses.
Reasoning: (a) it complicates tests and fixes, (b) they should be rare,
and (c) this is just a minor wire optimization, and thus not really worth worrying
about in this context.
Fixes#5955.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/12435043
A response to a HEAD request is supposed to look the same as a
response to a GET request, just without a body.
HEAD requests are incredibly rare in the wild.
The Go net/http package has so far treated HEAD requests
specially: a Write on our default ResponseWriter returned
ErrBodyNotAllowed, telling handlers that something was wrong.
This was to optimize the fast path for HEAD requests, but:
1) because HEAD requests are incredibly rare, they're not
worth having a fast path for.
2) Letting the http.Handler handle but do nop Writes is still
very fast.
3) this forces ugly error handling into the application.
e.g. https://code.google.com/p/go/source/detail?r=6f596be7a31e
and related.
4) The net/http package nowadays does Content-Type sniffing,
but you don't get that for HEAD.
5) The net/http package nowadays does Content-Length counting
for small (few KB) responses, but not for HEAD.
6) ErrBodyNotAllowed was useless. By the time you received it,
you had probably already done all your heavy computation
and I/O to calculate what to write.
So, this change makes HEAD requests like GET requests.
We now count content-length and sniff content-type for HEAD
requests. If you Write, it doesn't return an error.
If you want a fast-path in your code for HEAD, you have to do
it early and set all the response headers yourself. Just like
before. If you choose not to Write in HEAD requests, be sure
to set Content-Length if you know it. We won't write
"Content-Length: 0" because you might've just chosen to not
write (or you don't know your Content-Length in advance).
Fixes#5454
R=golang-dev, dsymonds
CC=golang-dev
https://golang.org/cl/12583043
This CL refactors the existing listenerSockaddr function into several
methods on netFD.
This is in preparation for runtime-integrated network pollster for BSD
variants.
Update #5199
R=golang-dev, dave, alex.brainman, dvyukov, remyoudompheng
CC=golang-dev
https://golang.org/cl/12023043
Looks like latest FreeBSD doesn't set address family identifer
for RTAX_NETMASK stuff; probably RTAX_GENMASK too, not confirmed.
This CL tries to identify address families by using the length of
each socket address if possible.
The issue is confirmed on FreeBSD 9.1.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/12332043
Unlike the existing net package own pollster, runtime-integrated
network pollster on BSD variants, actually kqueue, requires a socket
that has beed passed to syscall.Listen previously for a stream
listener.
This CL separates pollDesc.Init (actually runtime_pollOpen) from newFD
to allow control of each state of sockets and adds init method to netFD
instead. Upcoming CLs will rearrange the call order of runtime-integrated
pollster and syscall functions like the following;
- For dialers that open active connections, runtime_pollOpen will be
called in between syscall.Bind and syscall.Connect.
- For stream listeners that open passive stream connections,
runtime_pollOpen will be called just after syscall.Listen.
- For datagram listeners that open datagram connections,
runtime_pollOpen will be called just after syscall.Bind.
This is in preparation for runtime-integrated network pollster for BSD
variants.
Update #5199
R=dvyukov, alex.brainman, minux.ma
CC=golang-dev
https://golang.org/cl/8608044
Embed all data necessary for read/write operations directly into netFD.
benchmark old ns/op new ns/op delta
BenchmarkTCP4Persistent 27669 23341 -15.64%
BenchmarkTCP4Persistent-2 18173 12558 -30.90%
BenchmarkTCP4Persistent-4 10390 7319 -29.56%
This change will intentionally break all builders to see
how many allocations they do per read/write.
This will be fixed soon afterwards.
R=golang-dev, alex.brainman
CC=golang-dev
https://golang.org/cl/12413043
This means that in the common case (modern kernel), we only
make 1 system call to dup instead of two, and we also avoid
grabbing the syscall.ForkLock.
R=golang-dev, iant
CC=golang-dev
https://golang.org/cl/12476043
Runtime netpoll supports at most one read waiter
and at most one write waiter. It's responsibility
of net package to ensure that. Currently windows
implementation allows more than one waiter in Accept.
It leads to "fatal error: netpollblock: double wait".
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/12400045
Whether the keys are concatenated or separate (or a mixture) depends on the server.
Fixes#5979.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/12433043
Windows dynamic priority boosting assumes that a process has different types
of dedicated threads -- GUI, IO, computational, etc. Go processes use
equivalent threads that all do a mix of GUI, IO, computations, etc.
In such context dynamic priority boosting does nothing but harm, so turn it off.
In particular, if 2 goroutines do heavy IO on a server uniprocessor machine,
windows rejects to schedule timer thread for 2+ seconds when priority boosting is enabled.
Fixes#5971.
R=alex.brainman
CC=golang-dev
https://golang.org/cl/12406043
This CL makes IPAddr, UDPAddr and TCPAddr implement sockaddr
interface, UnixAddr is already sockaddr interface compliant, and
reduces unnecessary conversions between net.Addr, net.sockaddr and
syscall.Sockaddr.
This is in preparation for runtime-integrated network pollster for BSD
variants.
Update #5199
R=golang-dev, dave, bradfitz
CC=golang-dev
https://golang.org/cl/12010043
If netFD is closed by finalizer, runtime netpoll descriptor is not freed.
R=golang-dev, dave, alex.brainman
CC=golang-dev
https://golang.org/cl/12037043
