Make sure that we compare fields of structs and elements of arrays in order,
with proper short-circuiting.
Update #8606
Change-Id: I0a66ad92ea0af7bcc56dfdb275dec2b8d7e8b4fe
Reviewed-on: https://go-review.googlesource.com/c/go/+/236147
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change fixes a race condition between beforeIdle waking up the
innermost event handler and a timer causing a different goroutine to
wake up at the exact same moment. This messes up the wasm event handling
and leads to memory corruption. The solution is to make beforeIdle
return the goroutine that must run next and have findrunnable pick
this goroutine without considering timers again.
Fixes#38093Fixes#38574
Change-Id: Iffbe99411d25c2730953d1c8b0741fd892f8e540
Reviewed-on: https://go-review.googlesource.com/c/go/+/230178
Run-TryBot: Richard Musiol <neelance@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
CL 233857 fixed the underlying issue for #37246,
which had arisen again as #38916.
Add the test case from #37246 to ensure it stays fixed.
Fixes#37246
Change-Id: If7fd75a096d2ce4364dc15509253c3882838161d
Reviewed-on: https://go-review.googlesource.com/c/go/+/233941
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
When tuple generators and selectors are eliminated as part of the
CSE pass we may end up with tuple selectors that are in different
blocks to the tuple generators that they correspond to. This breaks
the invariant that tuple generators and their corresponding
selectors must be in the same block. Therefore after CSE this
situation must be corrected.
Unfortunately the fixup code did not take into account that selectors
could be eliminated by CSE. It assumed that only the tuple generators
could be eliminated. In some situations this meant that it got into
a state where it was replacing references to selectors with references
to dead selectors in the wrong block.
To fix this we move the fixup code after the CSE rewrites have been
applied. This removes any difficult-to-reason-about interactions
with the CSE rewriter.
Fixes#38916.
Change-Id: I2211982dcdba399d03299f0a819945b3eb93b291
Reviewed-on: https://go-review.googlesource.com/c/go/+/233857
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Improve the error user experience when users try to set/refer
to unexported fields and methods of struct literals, by directly saying
"cannot refer to unexported field or method"
Fixes#31053
Change-Id: I6fd3caf64b7ca9f9d8ea60b7756875e340792d59
Reviewed-on: https://go-review.googlesource.com/c/go/+/201657
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Omits printing the file:line:column when trying to
open non-existent files
Given:
go tool compile x.go
* Before:
x.go:0: open x.go: no such file or directory
* After:
open x.go: no such file or directory
Reverts the revert in CL 231043 by only fixing the case
of non-existent errors which is what the original bug
was about. The fix for "permission errors" will come later
on when I have bandwidth to investigate the differences
between running with root and why os.Open works for some
builders and not others.
Fixes#36437
Change-Id: I9c8a0981ad708b504bb43990a4105b42266fa41f
Reviewed-on: https://go-review.googlesource.com/c/go/+/230941
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
The {AND,OR,XOR}const ops can only take an int32 as an argument.
Make sure that when rewriting a BTx op to one of these, the result
has no high-order bits.
Fixes#38746
Change-Id: Ia7c5f76952329f60974bc033c29a5433610f3b28
Reviewed-on: https://go-review.googlesource.com/c/go/+/231977
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This reverts commit 4f7053c87f.
Reason for revert: Newly added test is failing on several builders.
Change-Id: I22dcbfebf2f57735b2f479886bbeb623f95b132f
Reviewed-on: https://go-review.googlesource.com/c/go/+/231043
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Omits printing the file:line:column when trying to open either
* non-existent files
* files without permission
Given:
go tool compile x.go
For either of x.go not existing, or if no read permissions:
* Before:
x.go:0: open x.go: no such file or directory
x.go:0: open x.go: permission denied
* After:
open x.go: no such file or directory
open x.go: permission denied
While here, noticed an oddity with the Linux builders, that appear
to always be running under root, hence the test for permission errors
with 0222 -W-*-W-*-W- can't pass on linux-amd64 builders.
The filed bug is #38608.
Fixes#36437
Change-Id: I9645ef73177c286c99547e3a0f3719fa07b35cb5
Reviewed-on: https://go-review.googlesource.com/c/go/+/229357
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This CL uses fixVariadicCall before escape analyzing function calls.
This has a number of benefits, though also some minor obstacles:
Most notably, it allows us to remove ODDDARG along with the logic
involved in setting it up, manipulating EscHoles, and later copying
its escape analysis flags to the actual slice argument. Instead, we
uniformly handle all variadic calls the same way. (E.g., issue31573.go
is updated because now f() and f(nil...) are handled identically.)
It also allows us to simplify handling of builtins and generic
function calls. Previously handling of calls was hairy enough to
require multiple dispatches on n.Op, whereas now the logic is uniform
enough that we can easily handle it with a single dispatch.
The downside is handling //go:uintptrescapes is now somewhat clumsy.
(It used to be clumsy, but it still is, too.) The proper fix here is
probably to stop using escape analysis tags for //go:uintptrescapes
and unsafe-uintptr, and have an earlier pass responsible for them.
Finally, note that while we now call fixVariadicCall in Escape, we
still have to call it in Order, because we don't (yet) run Escape on
all compiler-generated functions. In particular, the generated "init"
function for initializing package-level variables can contain calls to
variadic functions and isn't escape analyzed.
Passes toolstash-check -race.
Change-Id: I4cdb92a393ac487910aeee58a5cb8c1500eef881
Reviewed-on: https://go-review.googlesource.com/c/go/+/229759
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Previously for a method value "x.M", we always flowed x directly to
the heap, which led to the receiver argument generally needing to be
heap allocated.
This CL changes it to flow x to the closure and M's receiver
parameter. This allows receiver arguments to be stack allocated as
long as (1) the closure never escapes, *and* (2) method doesn't leak
its receiver parameter.
Within the standard library, this allows a handful of objects to be
stack allocated instead. Listed here are diagnostics that were
previously emitted by "go build -gcflags=-m std cmd" that are no
longer emitted:
archive/tar/writer.go:118:6: moved to heap: f
archive/tar/writer.go:208:6: moved to heap: f
archive/tar/writer.go:248:6: moved to heap: f
cmd/compile/internal/gc/initorder.go:252:2: moved to heap: d
cmd/compile/internal/gc/initorder.go:75:2: moved to heap: s
cmd/go/internal/generate/generate.go:206:7: &Generator literal escapes to heap
cmd/internal/obj/arm64/asm7.go:910:2: moved to heap: c
cmd/internal/obj/mips/asm0.go:415:2: moved to heap: c
cmd/internal/obj/pcln.go:294:22: new(pcinlineState) escapes to heap
cmd/internal/obj/s390x/asmz.go:459:2: moved to heap: c
crypto/tls/handshake_server.go:56:2: moved to heap: hs
Thanks to Cuong Manh Le for help coming up with this solution.
Fixes#27557.
Change-Id: I8c85d671d07fb9b53e11d2dd05949a34dbbd7e17
Reviewed-on: https://go-review.googlesource.com/c/go/+/228263
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This test started failing at CL 228106 and was fixed by CL 228677.
Fixes#38496
Change-Id: I2dadcd99227347e8d28179039f5f345e728c4595
Reviewed-on: https://go-review.googlesource.com/c/go/+/228698
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
When inserting Select0 and Select1 ops we need to ensure that they
live in the same block as their argument. This is because they need
to be scheduled immediately after their argument for register and
flag allocation to work correctly.
Fixes#38356.
Change-Id: Iba384dbe87010f1c7c4ce909f08011e5f1de7fd5
Reviewed-on: https://go-review.googlesource.com/c/go/+/227879
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Missed as part of CL 221790. It isn't just * and / that can make NaNs.
Update #36400Fixes#38359
Change-Id: I3fa562f772fe03b510793a6dc0cf6189c0c3e652
Reviewed-on: https://go-review.googlesource.com/c/go/+/227860
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This removes all files that are only used on darwin/arm and cleans up
build tags in files that are still used on other platforms.
Updates #37611.
Change-Id: Ic9490cf0edfc157c6276a7ca950c1768b34a998f
Reviewed-on: https://go-review.googlesource.com/c/go/+/227197
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
If slice cap is not set, it will be equal to slice len. So
isSmallMakeSlice only needs to check whether slice cap is constant.
While at it, also add test to make sure panicmakeslicecap is called
when make slice contains invalid non-constant len.
For this benchmark:
func BenchmarkMakeSliceNonConstantLen(b *testing.B) {
len := 1
for i := 0; i < b.N; i++ {
s := make([]int, len, 2)
_ = s
}
}
Result compare with parent:
name old time/op new time/op delta
MakeSliceNonConstantLen-12 18.4ns ± 1% 0.2ns ± 2% -98.66% (p=0.008 n=5+5)
Fixes#37975
Change-Id: I4bc926361bc2ffeab4cfaa888ef0a30cbc3b80e8
Reviewed-on: https://go-review.googlesource.com/c/go/+/226278
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
In CL 187657, I refactored constant conversion logic without realizing
that conversions between int/float and complex types are allowed for
constants (assuming the constant values are representable by the
destination type), but are never allowed for non-constant expressions.
This CL expands convertop to take an extra srcConstant parameter to
indicate whether the source expression is a constant; and if so, to
allow any numeric-to-numeric conversion. (Conversions of values that
cannot be represented in the destination type are rejected by
evconst.)
Fixes#38117.
Change-Id: Id7077d749a14c8fd910be38da170fa5254819f2b
Reviewed-on: https://go-review.googlesource.com/c/go/+/226197
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The "runindir" tests used "go run", but relied on relative imports
(which are not supported by "go run" in module mode). Instead, such
tests must use fully-qualified imports, which require either a go.mod
file (in module mode) or that the package be in an appropriate
subdirectory of GOPATH/src (in GOPATH mode).
To set up such a directory, we use yet another copy of the same
overlayDir function currently found in the misc subdirectory of this
repository.
Fixes#33912
Updates #30228
Change-Id: If3d7ea2f7942ba496d98aaaf24a90bcdcf4df9f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/225205
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If typehash (used by reflect) does not match the built-in map's hash,
then problems occur. If a map is built using reflect, and then
assigned to a variable of map type, the hash function can change. That
causes very bad things.
This issue is rare. MapOf consults a cache of all types that occur in
the binary before making a new one. To make a true new map type (with
a hash function derived from typehash) that map type must not occur in
the binary anywhere. But to cause the bug, we need a variable of that
type in order to assign to it. The only way to make that work is to
use a named map type for the variable, so it is distinct from the
unnamed version that MapOf looks for.
Fixes#37716
Change-Id: I3537bfceca8cbfa1af84202f432f3c06953fe0ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/222357
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
CL 212777 added a check to isNonNegative
to return true for unsigned values.
However, the SSA backend isn't type safe
enough for that to be sound.
The other checks in isNonNegative
look only at the pattern of bits.
Remove the type-based check.
Updates #37753
Change-Id: I059d0e86353453133f2a160dce53af299f42e533
Reviewed-on: https://go-review.googlesource.com/c/go/+/222620
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This is one of several changes that were part of a larger rewrite
which I made in early 2019 after switching to the new number literal
syntax implementation. The purpose of the rewrite was to simplify
reading of source code (Unicode character by character) and speed up
the scanner but was never submitted for review due to other priorities.
Part 2 of 3:
This change contains improvements to the scanner error messages:
- Use "rune literal" rather than "character literal" to match the
spec nomenclature.
- Shorter, more to the point error messages.
(For instance, "more than one character in rune literal" rather
than "invalid character literal (more than one character)", etc.)
Change-Id: I1aaf79003374a68dbb05926437ed305cf2a8ec96
Reviewed-on: https://go-review.googlesource.com/c/go/+/221602
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Print the bytes of the instruction that generated a SIGILL.
This should help us respond to bug reports without having to
go back-and-forth with the reporter to get the instruction involved.
Might also help with SIGILL problems that are difficult to reproduce.
Update #37513
Change-Id: I33059b1dbfc97bce16142a843f32a88a6547e280
Reviewed-on: https://go-review.googlesource.com/c/go/+/221431
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The existing implementation outputs inline cost iff function cannot be inlined with Debug['m'] > 1, the cost info is also useful if the function is inlineable.
Fixes#36780
Change-Id: Ic96f6baf96aee25fb4b33d31d4d644dc2310e536
Reviewed-on: https://go-review.googlesource.com/c/go/+/216778
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The wrapper takes a pointer to the argument, not the argument itself.
Fixes#36705
Change-Id: I566d4457d00bf5b84e4a8315a26516975f0d7e10
Reviewed-on: https://go-review.googlesource.com/c/go/+/215942
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
We should panic in this situation. Rewriting to a SSA op just leads
to a compiler panic.
Fixes#36259
Change-Id: I6e0bccbed7dd0fdac7ebae76b98a211947947386
Reviewed-on: https://go-review.googlesource.com/c/go/+/212405
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The error message is now positioned at the statement position (which is
an identifing token, such as the '=' for assignments); and in case of
assignments it emphasizes the assignment by putting the Lhs and Rhs
in parentheses. Finally, the wording is changed from "use of * as value"
to the stronger "cannot use * as value" (for which there is precedent
elsewhere in the parser).
Fixes#36858.
Change-Id: Ic3f101bba50f58e3a1d9b29645066634631f2d61
Reviewed-on: https://go-review.googlesource.com/c/go/+/218337
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
On PPC64, MOVWload, MOVDload, and MOVDstore are assembled to a
"DS from" instruction which requiers the offset is a multiple of
4. Only fold offset to such instructions if it is a multiple of 4.
Fixes#36723.
"GOARCH=ppc64 GOOS=linux go build -gcflags=all=-d=ssa/check/on std cmd"
passes now.
Change-Id: I67f2a6ac02f0d33d470f68ff54936c289a4c765b
Reviewed-on: https://go-review.googlesource.com/c/go/+/216379
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
This disables some tests that are unsupported on riscv64 and adds support
for risc64 to test/nosplit.
Updates #27532, #36739 and #36765
Change-Id: I0a57797a05bc80236709fc240c0a0efb0ee0d16b
Reviewed-on: https://go-review.googlesource.com/c/go/+/216263
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
CL 214679 added a -race test which shouldn't be run when cgo is not
enabled.
Fixes the nocgo builder.
Change-Id: Iceddf802c4ef6c0de2c3a968e86342303d2d27d8
Reviewed-on: https://go-review.googlesource.com/c/go/+/215477
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This avoids the security problem in #29312 where two very deep, but
distinct, types are given the same name. They both make it to the
linker which chooses one, and the use of the other is now type unsafe.
Instead, give every very deep type its own name. This errs on the
other side, in that very deep types that should be convertible to each
other might now not be. But at least that's not a security hole.
Update #29312.
Change-Id: Iac0ebe73fdc50594fd6fbf7432eef65f9a053126
Reviewed-on: https://go-review.googlesource.com/c/go/+/213517
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
The gccgo compiler did not generate type descriptor for a pointer
to a type alias defined in another package, causing linking error.
The fix is CL 210787. This CL adds a test.
Updates #36085.
Change-Id: I3237c7fedb4d92fb2dc610ee2b88087f96dc2a1a
Reviewed-on: https://go-review.googlesource.com/c/go/+/210858
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This test was recently added in CL 209961.
Apparently Windows can't seek a directory filehandle?
And move the test from test/fixedbugs (which is mostly for compiler bugs) to
an os package test.
Updates #36019
Change-Id: I626b69b0294471014901d0ccfeefe5e2c7651788
Reviewed-on: https://go-review.googlesource.com/c/go/+/210283
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The first Readdirnames calls opendir and caches the result.
The behavior of that cached opendir result isn't specified on a seek
of the underlying fd. Free the opendir result on a seek so that
we'll allocate a new one the next time around.
Also fix wasm behavior in this regard, so that a seek to the
file start resets the Readdirnames position, regardless of platform.
p.s. I hate the Readdirnames API.
Fixes#35767.
Change-Id: Ieffb61b3c5cdd42591f69ab13f932003966f2297
Reviewed-on: https://go-review.googlesource.com/c/go/+/209961
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The fix for #35652 did not guarantee that it was using a non-empty
src position to replace an empty one. The new code checks again
and falls back to a more certain position. (The input in question
compiles to a single empty infinite loop, and none of the actual instructions
had any source position at all. That is a bug, but given the pathology
of this input, not one worth dealing with this late in the release cycle,
if ever.)
Literally:
00000 (5) TEXT "".f(SB), ABIInternal
00001 (5) PCDATA $0, $-2
00002 (5) PCDATA $1, $-2
00003 (5) FUNCDATA $0, gclocals·33cdeccccebe80329f1fdbee7f5874cb(SB)
00004 (5) FUNCDATA $1, gclocals·33cdeccccebe80329f1fdbee7f5874cb(SB)
00005 (5) FUNCDATA $2, gclocals·33cdeccccebe80329f1fdbee7f5874cb(SB)
b2
00006 (?) XCHGL AX, AX
b6
00007 (+1048575) JMP 6
00008 (?) END
TODO: Add runtime.InfiniteLoop(), replace infinite loops with a call to
that, and use an eco-friendly runtime.gopark instead. (This was Cherry's
excellent idea.)
Updates #35652Fixes#35695
Change-Id: I4b9a841142ee4df0f6b10863cfa0721a7e13b437
Reviewed-on: https://go-review.googlesource.com/c/go/+/207964
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The old recipe for making an infinite loop not be infinite
in the debugger could create an instruction (Prog) with a
line number not tied to any file (index == 0). This caused
downstream failures in DWARF processing.
So don't do that. Also adds a test, also adds a check+panic
to ensure that the next time this happens the error is less
mystifying.
Fixes#35652
Change-Id: I04f30bc94fdc4aef20dd9130561303ff84fd945e
Reviewed-on: https://go-review.googlesource.com/c/go/+/207613
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This reverts CL 207477, restoring CL 207352 with a fix for the
regression observed in the Windows builders.
cmd/compile evidently does not fully support NUL as an output on
Windows, so this time we write ignored 'compile' outputs
to temporary files (instead of os.DevNull as in CL 207352).
Updates #28387Fixes#35619
Change-Id: I2edc5727c3738fa1bccb4b74e50d114cf2a7fcff
Reviewed-on: https://go-review.googlesource.com/c/go/+/207602
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL detects infinite loops due to negative dereference cycles
during escape analysis, and terminates the loop gracefully. We still
fail to print a complete explanation of the escape path, but esc.go
didn't print *any* explanation for these test cases, so the release
blocking issue here is simply that we don't infinite loop.
Updates #35518.
Change-Id: I39beed036e5a685706248852f1fa619af3b7abbc
Reviewed-on: https://go-review.googlesource.com/c/go/+/206619
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Unlike function calls, when processing instructions that directly
fault we must not subtract 1 from the pc before looking up the
file/line information.
Since the file/line lookup unconditionally subtracts 1, add 1 to
the faulting instruction PCs to compensate.
Fixes#34123
Change-Id: Ie7361e3d2f84a0d4f48d97e5a9e74f6291ba7a8b
Reviewed-on: https://go-review.googlesource.com/c/go/+/196962
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
When we do a successful recover of a panic, we resume normal execution by
returning from the frame that had the deferred call that did the recover (after
executing any remaining deferred calls in that frame).
However, suppose we have called runtime.Goexit and there is a panic during one of the
deferred calls run by the Goexit. Further assume that there is a deferred call in
the frame of the Goexit or a parent frame that does a recover. Then the recovery
process will actually resume normal execution above the Goexit frame and hence
abort the Goexit. We will not terminate the thread as expected, but continue
running in the frame above the Goexit.
To fix this, we explicitly create a _panic object for a Goexit call. We then
change the "abort" behavior for Goexits, but not panics. After a recovery, if the
top-level panic is actually a Goexit that is marked to be aborted, then we return
to the Goexit defer-processing loop, so that the Goexit is not actually aborted.
Actual code changes are just panic.go, runtime2.go, and funcid.go. Adjusted the
test related to the new Goexit behavior (TestRecoverBeforePanicAfterGoexit) and
added several new tests of aborted panics (whose behavior has not changed).
Fixes#29226
Change-Id: Ib13cb0074f5acc2567a28db7ca6912cfc47eecb5
Reviewed-on: https://go-review.googlesource.com/c/go/+/200081
Run-TryBot: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
"declared and not used" is technically correct, but might confuse
the user. Switching "and" to "but" will hopefully create the
contrast for the users: they did one thing (declaration), but
not the other --- actually using the variable.
This new message is still not ideal (specifically, declared is not
entirely precise here), but at least it matches the other parsers
and is one step in the right direction.
Change-Id: I725c7c663535f9ab9725c4b0bf35b4fa74b0eb20
Reviewed-on: https://go-review.googlesource.com/c/go/+/203282
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Updates #35157 (the bug there was fixed by CL200861)
Change-Id: I67069207b4cdc2ad4a475dd0bbc8555ecc5f534f
Reviewed-on: https://go-review.googlesource.com/c/go/+/203598
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
We need to explicitly convert pointers to unsafe.Pointer before
passing to the runtime checkptr instrumentation in case the user
declared their own type with underlying type unsafe.Pointer.
Updates #22218.
Fixes#34966.
Change-Id: I3baa2809d77f8257167cd78f57156f819130baa8
Reviewed-on: https://go-review.googlesource.com/c/go/+/201782
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
When a subsequent load/store of a ptr makes the nil check of that pointer
unnecessary, if their lines differ, change the line of the load/store
to that of the nilcheck, and attempt to rehome the load/store position
instead.
This fix makes profiling less accurate in order to make panics more
informative.
Fixes#33724
Change-Id: Ib9afaac12fe0d0320aea1bf493617facc34034b3
Reviewed-on: https://go-review.googlesource.com/c/go/+/200197
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Add to the testcase originally created for issue 34577 so
as to also trigger the error condition for issue 34852 (the
two bugs are closely related).
Updates #34577.
Updates #34852.
Change-Id: I2347369652ce500184347606b2bb3e76d802b204
Reviewed-on: https://go-review.googlesource.com/c/go/+/201017
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Increases the exec timeout from 5sec to 1min, but
also print out the error value on any test failure.
Fixes#34836
Change-Id: Ida2b8bd460243491ef0f90dfe0f978dfe02a0703
Reviewed-on: https://go-review.googlesource.com/c/go/+/200519
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Test case with code that caused a gccgo error while emitting export
data for an inlinable function.
Updates #34577.
Change-Id: I28b598c4c893c77f4a76bb4f2d27e5b42f702992
Reviewed-on: https://go-review.googlesource.com/c/go/+/198057
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 170950 had a regression that makes the compiler produce
an invalid wasm binary if the data section is too large.
Loading such a binary gives the following error:
"LinkError: WebAssembly.instantiate(): data segment is out of bounds"
This change fixes the issue by ensuring that the minimum size of the
linear memory is larger than the end of the data section.
Fixes#34395.
Change-Id: I0c8629de7ffd0d85895ad31bf8c9d45fef197a57
Reviewed-on: https://go-review.googlesource.com/c/go/+/199358
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We're allowed to remove a write barrier when both the old
value in memory and the new value we're writing are not heap pointers.
Improve both those checks a little bit.
A pointer is known to not be a heap pointer if it is read from
read-only memory. This sometimes happens for loads of pointers
from string constants in read-only memory.
Do a better job of tracking which parts of memory are known to be
zero. Before we just kept track of a range of offsets in the most
recently allocated object. For code that initializes the new object's
fields in a nonstandard order, that tracking is imprecise. Instead,
keep a bit map of the first 64 words of that object, so we can track
precisely what we know to be zeroed.
The new scheme is only precise up to the first 512 bytes of the object.
After that, we'll use write barriers unnecessarily. Hopefully most
initializers of large objects will use typedmemmove, which does only one
write barrier check for the whole initialization.
Fixes#34723
Update #21561
Change-Id: Idf6e1b7d525042fb67961302d4fc6f941393cac8
Reviewed-on: https://go-review.googlesource.com/c/go/+/199558
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
CL 188317 introduced a compiler crash during dwarf generation which
was reported as Issue #34520. After CL 188217, the issue appears to be
fixed. Add a testcase to avoid future regressions.
Fixes#34520
Change-Id: I73544a9e9baf8dbfb85c19eb6d202beea05affb6
Reviewed-on: https://go-review.googlesource.com/c/go/+/198546
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
By lazily starting the signal watch loop only on Notify,
we are able to have deadlock detection even when
"os/signal" is imported.
Thanks to Ian Lance Taylor for the solution and discussion.
With this change in, fix a runtime gorountine count test that
assumed that os/signal.init would unconditionally start the
signal watching goroutine, but alas no more.
Fixes#21576.
Change-Id: I6eecf82a887f59f2ec8897f1bcd67ca311ca42ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/101036
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This commit just adds a regress test for a few of the important corner
cases that I identified in #27557, which turn out to not be tested
anywhere.
While here, annotate a few of the existing test cases where we could
improve escape analysis.
Updates #27557.
Change-Id: Ie57792a538f7899bb17915485fabc86100f469a3
Reviewed-on: https://go-review.googlesource.com/c/go/+/197137
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
golang.org/cl/109517 optimized the compiler to avoid the allocation for make in
append(x, make([]T, y)...). This was only implemented for the case that y has type int.
This change extends the optimization to trigger for all integer types where the value
is known at compile time to fit into an int.
name old time/op new time/op delta
ExtendInt-12 106ns ± 4% 106ns ± 0% ~ (p=0.351 n=10+6)
ExtendUint64-12 1.03µs ± 5% 0.10µs ± 4% -90.01% (p=0.000 n=9+10)
name old alloc/op new alloc/op delta
ExtendInt-12 0.00B 0.00B ~ (all equal)
ExtendUint64-12 13.6kB ± 0% 0.0kB -100.00% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
ExtendInt-12 0.00 0.00 ~ (all equal)
ExtendUint64-12 1.00 ± 0% 0.00 -100.00% (p=0.000 n=10+10)
Updates #29785
Change-Id: Ief7760097c285abd591712da98c5b02bc3961fcd
Reviewed-on: https://go-review.googlesource.com/c/go/+/182559
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL expands the test for #29612 to check that type switches also
work correctly when type hashes collide.
Change-Id: Ia153743e6ea0736c1a33191acfe4d8ba890be527
Reviewed-on: https://go-review.googlesource.com/c/go/+/195782
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Support for overlapping interfaces is a new (proposed) Go language
feature to be supported in Go 1.14, so it shouldn't be supported under
-lang=go1.13 or earlier.
Fixes#34329.
Change-Id: I5fea5716b7d135476980bc40b4f6e8c611b67735
Reviewed-on: https://go-review.googlesource.com/c/go/+/195678
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This information is redundant with the position information already
provided. Also, no other -m diagnostics print out function name.
While here, report parameter leak diagnostics against the parameter
declaration position rather than the function, and use Warnl for
"moved to heap" messages.
Test cases updated programmatically by removing the first word from
every "no match for" error emitted by run.go:
go run run.go |& \
sed -E -n 's/^(.*):(.*): no match for `([^ ]* (.*))` in:$/\1!\2!\3!\4/p' | \
while IFS='!' read -r fn line before after; do
before=$(echo "$before" | sed 's/[.[\*^$()+?{|]/\\&/g')
after=$(echo "$after" | sed -E 's/(\&|\\)/\\&/g')
fn=$(find . -name "${fn}" | head -1)
sed -i -E -e "${line}s/\"${before}\"/\"${after}\"/" "${fn}"
done
Passes toolstash-check.
Change-Id: I6e02486b1409e4a8dbb2b9b816d22095835426b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/195040
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Previously, we used a single "untyped number" type for all untyped
numeric constants. This led to vague error messages like "string(1.0)"
reporting that "1 (type untyped number)" can't be converted to string,
even though "string(1)" is valid.
This CL makes cmd/compile more like go/types by utilizing
types.Ideal{int,rune,float,complex} instead of types.Types[TIDEAL],
and keeping n.Type in sync with n.Val().Ctype() during constant
folding.
Thanks to K Heller for looking into this issue, and for the included
test case.
Fixes#21979.
Change-Id: Ibfea88c05704bc3c0a502a455d018a375589754d
Reviewed-on: https://go-review.googlesource.com/c/go/+/194019
Reviewed-by: Robert Griesemer <gri@golang.org>
Use the following (suboptimal) script to obtain a list of possible
typos:
#!/usr/bin/env sh
set -x
git ls-files |\
grep -e '\.\(c\|cc\|go\)$' |\
xargs -n 1\
awk\
'/\/\// { gsub(/.*\/\//, ""); print; } /\/\*/, /\*\// { gsub(/.*\/\*/, ""); gsub(/\*\/.*/, ""); }' |\
hunspell -d en_US -l |\
grep '^[[:upper:]]\{0,1\}[[:lower:]]\{1,\}$' |\
grep -v -e '^.\{1,4\}$' -e '^.\{16,\}$' |\
sort -f |\
uniq -c |\
awk '$1 == 1 { print $2; }'
Then, go through the results manually and fix the most obvious typos in
the non-vendored code.
Change-Id: I3cb5830a176850e1a0584b8a40b47bde7b260eae
Reviewed-on: https://go-review.googlesource.com/c/go/+/193848
Reviewed-by: Robert Griesemer <gri@golang.org>
This CL detangles the hairy mess that was convlit+defaultlit. In
particular, it makes the following changes:
1. convlit1 now follows the standard typecheck behavior of setting
"n.Type = nil" if there's an error. Notably, this means for a lot of
test cases, we now avoid reporting useless follow-on error messages.
For example, after reporting that "1 << s + 1.0" has an invalid shift,
we no longer also report that it can't be assigned to string.
2. Previously, assignconvfn had some extra logic for trying to
suppress errors from convlit/defaultlit so that it could provide its
own errors with better context information. Instead, this extra
context information is now passed down into convlit1 directly.
3. Relatedly, this CL also removes redundant calls to defaultlit prior
to assignconv. As a consequence, when an expression doesn't make sense
for a particular assignment (e.g., assigning an untyped string to an
integer), the error messages now say "untyped string" instead of just
"string". This is more consistent with go/types behavior.
4. defaultlit2 is now smarter about only trying to convert pairs of
untyped constants when it's likely to succeed. This allows us to
report better error messages for things like 3+"x"; instead of "cannot
convert 3 to string" we now report "mismatched types untyped number
and untyped string".
Passes toolstash-check.
Change-Id: I26822a02dc35855bd0ac774907b1cf5737e91882
Reviewed-on: https://go-review.googlesource.com/c/go/+/187657
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This reverts commit 2da9c3e0f9.
Reason for revert: while the new error messages are more informative,
they're not strictly correct. This CL also conflicts with CL 187657.
Change-Id: I1c36cf7e86c2f35ee83a4f98918ee38aa1f59965
Reviewed-on: https://go-review.googlesource.com/c/go/+/193977
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Follow-up to Change-Id: If6e52c59eab438599d641ecf6f110ebafca740a9
This addresses the remaining tech debt on issue 21979.
The aforementioned previous CL silenced one of two mostly redundant
compiler errors. However, the silenced error was the more expressive
error. This CL now imbues the surviving error with the same level
of expressiveness as the old semi-redundant error.
Fixes#21979
Change-Id: I3273d48c88bbab073fabe53421d801df621ce321
Reviewed-on: https://go-review.googlesource.com/c/go/+/191079
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Test with some code that triggered a compilation error bug in gccgo.
Updates #33866.
Change-Id: Ib2f226bbbebbfae33b41037438fe34dc5f2ad034
Reviewed-on: https://go-review.googlesource.com/c/go/+/193261
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In general, a conversion to interface type may require values to be
boxed, which in turn necessitates escape analysis to determine whether
the boxed representation can be stack allocated.
However, esc.go used to unconditionally print escape analysis
decisions about OCONVIFACE, even for conversions that don't require
boxing (e.g., pointers, channels, maps, functions).
For test compatibility with esc.go, escape.go similarly printed these
useless diagnostics. This CL removes the diagnostics, and updates test
expectations accordingly.
Change-Id: I97c57a4a08e44d265bba516c78426ff4f2bf1e12
Reviewed-on: https://go-review.googlesource.com/c/go/+/192697
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL extends {defer,resume}checkwidth to support nesting, which
simplifies usage.
Updates #33658.
Change-Id: Ib3ffb8a7cabfae2cbeba74e21748c228436f4726
Reviewed-on: https://go-review.googlesource.com/c/go/+/192721
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Raising an out-of-bounds panic is confusing. There's no indication
that the underlying problem is a race.
The runtime already does a pretty good job of detecting this kind of
race (modification while iterating). We might as well just reorganize
a bit to avoid the out-of-bounds panic.
Fixes#33275
Change-Id: Icdd337ad2eb3c84f999db0850ec1d2ff2c146b6e
Reviewed-on: https://go-review.googlesource.com/c/go/+/191197
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
- only convert literal strings if there were no syntax errors
(some of the conversion routines exit if there is an error)
- mark nodes for literals with syntax errors to avoid follow-on
errors
- don't attempt to import packages whose path had syntax errors
Fixes#32133.
Change-Id: I1803ad48c65abfecf6f48ddff1e27eded5e282c5
Reviewed-on: https://go-review.googlesource.com/c/go/+/192437
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The existing pointer comparison optimizations
don't include pointer arithmetic. Add them.
These rules trigger a few times in std cmd, while compiling:
time.Duration.String
cmd/go/internal/tlog.NodeHash
crypto/tls.ticketKeyFromBytes (3 times)
crypto/elliptic.(*p256Point).p256ScalarMult (15 times!)
crypto/elliptic.initTable
These weird comparisons occur when using the copy builtin,
which does a pointer comparison between src and dst.
This also happens to fix#32454, by optimizing enough
early on that all values can be eliminated.
Fixes#32454
Change-Id: I799d45743350bddd15a295dc1e12f8d03c11d1c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/180940
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The original report in #5172 was that cmd/compile was generating bogus
follow-on error messages when typechecking a struct failed. Instead of
fixing those follow-on error messages, golang.org/cl/9614044 suppress all
follow-on error messages after struct typecheck fails. We should
continue emitting error messages instead.
While at it, also add the test case for original report.
Fixes#33947
Change-Id: I4a5c6878977128abccd704350a12df743631c7bf
Reviewed-on: https://go-review.googlesource.com/c/go/+/191944
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Complex type is the only TIDEAL that lack of support for all comparison
operators. When rewriting constant comparison into literal node, that
missing cause compiler raise an internal error.
Checking the operator is available for complex type before that fix the
problem.
We can make this check works more generally if there's more type lack of
supporting all comparison operators added, but it does not seem to be
happened, so just check explicitly for complex only.
Fixes#32723
Change-Id: I4938b1bdcbcdae9a9d87436024984bd2ab12995e
Reviewed-on: https://go-review.googlesource.com/c/go/+/183459
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
typecheck only set n.Type.Nod for declared type, and leave it nil for
anonymous types, type alias. It leads to compiler crashes, because
n.Type.Nod is nil at the time dowidth was called.
Fixing it by set n.Type.Nod right after n.Type initialization if n.Op is
OTYPE.
When embedding interface cycles involve in type alias, it also helps
pointing the error message to the position of the type alias
declaration, instead of position of embedding interface.
Fixes#31872
Change-Id: Ia18391e987036a91f42ba0c08b5506f52d07f683
Reviewed-on: https://go-review.googlesource.com/c/go/+/191540
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Testcase for a gollvm bug (assert in Llvm_backend::materializeComposite).
Updates golang/go#33020.
Change-Id: Icdf5b4b2b6eb55a5b48a31a61c41215b1ae4cf01
Reviewed-on: https://go-review.googlesource.com/c/go/+/191743
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In interface-to-concrete comparisons, we are short circuiting on the interface
value's dynamic type before evaluating the concrete expression for side effects,
causing concrete expression won't panic at runtime, while it should.
To fix it, evaluating the RHS of comparison before we do the short-circuit.
We also want to prioritize panics in the LHS over the RHS, so evaluating
the LHS too.
Fixes#32187
Change-Id: I15b58a523491b7fd1856b8fdb9ba0cba5d11ebb4
Reviewed-on: https://go-review.googlesource.com/c/go/+/178817
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Prep for subsequent CLs to remove old escape analysis pass.
This CL removes -newescape=true from tests that use it, and deletes
tests that use -newescape=false. (For history, see CL 170447.)
Notably, this removes escape_because.go without any replacement, but
this is being tracked by #31489.
Change-Id: I6f6058d58fff2c5d210cb1d2713200cc9f501ca7
Reviewed-on: https://go-review.googlesource.com/c/go/+/187617
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This CL add test cases for the unary FP negative
operation.
Change-Id: I54e7292ca9df05da0c2b113adefc97ee1e94c6e2
Reviewed-on: https://go-review.googlesource.com/c/go/+/190937
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Because the Node AST represents references to declared objects (e.g.,
variables, packages, types, constants) by directly pointing to the
referred object, we don't have use-position info for these objects.
For switch statements with duplicate cases, we report back where the
first duplicate value appeared. However, due to the AST
representation, if the value was a declared constant, we mistakenly
reported the constant declaration position as the previous case
position.
This CL reports back against the 'case' keyword's position instead, if
there's no more precise information available to us.
It also refactors code to emit the same "previous at" error message
for duplicate values in map literals.
Thanks to Emmanuel Odeke for the test case.
Fixes#33460.
Change-Id: Iec69542ccd4aad594dde8df02d1b880a422c5622
Reviewed-on: https://go-review.googlesource.com/c/go/+/188901
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Don't skip closing parentheses of any kind after a missing
expression. They are likely part of the lexical construct
enclosing the expression.
Fixes#33386.
Change-Id: Ic0abc2037ec339a345ec357ccc724b7ad2a64c00
Reviewed-on: https://go-review.googlesource.com/c/go/+/188502
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Quietly drop duplicate methods inherited from embedded interfaces if
they have an identical signature to existing methods.
Updates #6977.
Change-Id: I144151cb7d99695f12b555c0db56207993c56284
Reviewed-on: https://go-review.googlesource.com/c/go/+/187519
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Quietly drop duplicate methods from embedded interfaces
if they have an identical signature to existing methods.
Instead of adjusting the prior syntax-based only method set
computation where methods don't have signature information
(and thus where de-duplication according to the new rules
would have been somewhat tricky to get right), this change
completely rewrites interface method set computation, taking
a page from the cmd/compiler's implementation. In a first
pass, when type-checking interfaces, explicit methods and
embedded interfaces are collected, but the interfaces are
not "expanded", that is the final method set computation
is done lazily, either when needed for method lookup, or
at the end of type-checking.
While this is a substantial rewrite, it allows us to get
rid of the separate (duplicate and delicate) syntactical
method set computation and generally simplifies checking
of interface types significantly. A few (esoteric) test
cases now have slightly different error messages but all
tests that are accepted by cmd/compile are also accepted
by go/types.
(This is a replacement for golang.org/cl/190258.)
Updates #6977.
Change-Id: Ic8b9321374ab4f617498d97c12871b69d1119735
Reviewed-on: https://go-review.googlesource.com/c/go/+/191257
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
There is real (albeit generated) code that exceeds the limit.
Fixes#33555
Change-Id: I668e85825d3d2a471970e869abe63f3492213cc1
Reviewed-on: https://go-review.googlesource.com/c/go/+/189697
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The compiler can crash if the compiled code tries to
unconditionally read from a nil pointer. This should cause
the generated binary to panic, not the compiler.
Fixes#33438
Change-Id: Ic8fa89646d6968e2cc4e27da0ad9286662f8bc49
Reviewed-on: https://go-review.googlesource.com/c/go/+/188760
Reviewed-by: Austin Clements <austin@google.com>
We shouldn't mask to desired registers if we haven't masked out all the
forbidden registers yet. In this path we haven't masked out the nospill
registers yet. If the resulting mask contains only nospill registers, then
allocReg fails.
This can only happen on resultNotInArgs-marked instructions, which exist
only on the ARM64, MIPS, MIPS64, and PPC64 ports.
Maybe there's a better way to handle resultNotInArgs instructions.
But for 1.13, this is a low-risk fix.
Fixes#33355
Change-Id: I1082f78f798d1371bde65c58cc265540480e4fa4
Reviewed-on: https://go-review.googlesource.com/c/go/+/188178
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Gccgo generates incorrect type equality functions for some types.
CL 185817 fixes it. This CL adds a test.
Updates #33062.
Change-Id: Id445c5d44a437512c65c46a029e49b7fc32e4d89
Reviewed-on: https://go-review.googlesource.com/c/go/+/185818
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Updates #33013
Change-Id: I3db062b37860bb0c6c99a553408b47cf0313531e
Reviewed-on: https://go-review.googlesource.com/c/go/+/185517
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For OLSH/ORSH, the right node is not a uintptr-typed. However,
unsafeValue still be called recursively for it, causing the
compiler crashes.
To fixing, the right node only needs to be evaluated
for side-effects, so just discard its value.
Fixes#32959
Change-Id: I34d5aa0823a0545f6dad1ec34774235ecf11addc
Reviewed-on: https://go-review.googlesource.com/c/go/+/185039
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Test case that causes incorrect compiler error from gccgo.
Updates #32922
Change-Id: I59432a8e8770cf03eda293f6d110c081c18fa88b
Reviewed-on: https://go-review.googlesource.com/c/go/+/184918
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL adds a test for gccgo bug #32901: not all the type
descriptors are registered and thus deduplicated with types
created by reflection. It needs a few levels of indirect imports
to trigger this bug.
Updates #32901.
Change-Id: Idbd89bedd63fea746769f2687f3f31c9767e5ec0
Reviewed-on: https://go-review.googlesource.com/c/go/+/184718
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Test case that caused a compiler crash in gofrontend, related to
exporting inlinable function bodies.
Updates #32778
Change-Id: Iacf1753825d5359da43e5e281189876d4c3dd3c9
Reviewed-on: https://go-review.googlesource.com/c/go/+/183851
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It ends up making two similar types, [N]uint8 of both
alg and noalg varieties. Comparsions between the two then
don't come out equal when they should.
In particular, the type *[N]uint8 has an Elem pointer which
must point to one of the above two types; it can't point to both.
Thus allocating a *[N]uint8 and dereferencing it might be a
different type than a [N]uint8.
The fix is easy. Making a small test for this is really hard. It
requires that both a argless defer and the test be imported by a
common parent package. This is why a main binary doesn't see this
issue, but a test does (as Agniva noticed), because there's a wrapper
package that imports both the test and the defer.
Types like [N]uint8 don't really need to be marked noalg anyway,
as the generated code (if any) will be shared among all
vanilla memory types of the same size.
Fixes#32595
Change-Id: If7b77fa6ed56cd4495601c3f90170682d853b82f
Reviewed-on: https://go-review.googlesource.com/c/go/+/182357
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A missing operand to mergePoint caused lower to place values
in the wrong blocks.
Includes test, belt+suspenders to do both ssa check and verify
the output (was is how the bug was originally observed).
The fixed bug here is very likely present in Go versions
1.9-1.12 on amd64 and s390x
Fixes#32680.
Change-Id: I63e702c4c40602cb795ef71b1691eb704d38ccc7
Reviewed-on: https://go-review.googlesource.com/c/go/+/183059
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
For int8, int16, and int32, comparing their unsigned value to MaxInt64
to determine non-negativity doesn't make sense, because they have
negative values whose unsigned representation is smaller than that.
Fix is simply to compare with the appropriate upper bound based on the
value type's size.
Fixes#32560.
Change-Id: Ie7afad7a56af92bd890ba5ff33c86d1df06cfd9a
Reviewed-on: https://go-review.googlesource.com/c/go/+/181797
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The logic for detecting deferreturn calls is wrong.
We used to look for a relocation whose symbol is runtime.deferreturn
and has an offset of 0. But on some architectures, the relocation
offset is not zero. These include arm (the offset is 0xebfffffe) and
s390x (the offset is 6).
This ends up setting the deferreturn offset at 0, so we end up using
the entry point live map instead of the deferreturn live map in a
frame which defers and then segfaults.
Instead, use the IsDirectCall helper to find calls.
Fixes#32477
Update #6980
Change-Id: Iecb530a7cf6eabd7233be7d0731ffa78873f3a54
Reviewed-on: https://go-review.googlesource.com/c/go/+/181258
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Shrinks the size of things that can be stack allocated from
10M to 128k for declared variables and from 64k to 16k for
implicit allocations (new(T), &T{}, etc).
Usage: "go build -gcflags -smallframes hello.go"
An earlier GOEXPERIMENT version of this caused only one
problem, when a gc-should-detect-oversize-stack test no
longer had an oversized stack to detect. The change was
converted to a flag to make it easier to access (for
diagnosing "long" GC-related single-thread pauses) and to
remove interference with the test.
Includes test to verify behavior.
Updates #27732.
Change-Id: I1255d484331e77185e07c78389a8b594041204c2
Reviewed-on: https://go-review.googlesource.com/c/go/+/180817
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Normally, reflect.makeFuncStub records the context value at a known
point in the stack frame, so that the runtime can get the argument map
for reflect.makeFuncStub from that known location.
This doesn't work for defers or goroutines that haven't started yet,
because they haven't allocated a frame or run an instruction yet. The
argument map must be extracted from the context value. We already do
this for defers (the non-nil ctxt arg to getArgInfo), we just need to
do it for unstarted goroutines as well.
When we traceback a goroutine, remember the context value from
g.sched. Use it for the first frame we find.
(We never need it for deeper frames, because we normally don't stop at
the start of reflect.makeFuncStub, as it is nosplit. With this CL we
could allow makeFuncStub to no longer be nosplit.)
Fixes#25897
Change-Id: I427abf332a741a80728cdc0b8412aa8f37e7c418
Reviewed-on: https://go-review.googlesource.com/c/go/+/180258
Reviewed-by: Cherry Zhang <cherryyz@google.com>
We need to make sure that there's no possible faulting
instruction between a VarDef and that variable being
fully initialized. If there was, then anything scanning
the stack during the handling of that fault will see
a live but uninitialized variable on the stack.
If we have:
NilCheck p
VarDef x
x = *p
We can't rewrite that to
VarDef x
NilCheck p
x = *p
Particularly, even though *p faults on p==nil, we still
have to do the explicit nil check before the VarDef.
Fixes#32288
Change-Id: Ib8b88e6a5af3bf6f238ff5491ac86f53f3cf9fc9
Reviewed-on: https://go-review.googlesource.com/c/go/+/179239
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The gccgo compiler crashes with int-to-string conversion with
large integer constant operand. CL 179777 is the fix. This CL
adds a test.
Updates #32347.
Change-Id: Id1d9dbbcdd3addca4636f1b9c5fdbc450cc48c1d
Reviewed-on: https://go-review.googlesource.com/c/go/+/179797
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL rewrites cmd/compile's package-level initialization ordering
algorithm to be compliant with the Go spec. See documentation in
initorder.go for details.
Incidentally, this CL also improves fidelity of initialization loop
diagnostics by including referenced functions in the emitted output
like go/types does.
Fixes#22326.
Change-Id: I7c9ac47ff563df4d4f700cf6195387a0f372cc7b
Reviewed-on: https://go-review.googlesource.com/c/go/+/170062
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The code in #29218 resulted in an If block containing only its control.
That block was then converted by fuseIf into a plain block;
as a result, that control value was dead.
However, the control value was still present in b.Values.
This prevented further fusing of that block.
This change beefs up the check in fuseIf to allow fusing
blocks that contain only dead values (if any).
In the case of #29218, this enables enough extra
fusing that the control value could be eliminated,
allowing all values in turn to be eliminated.
This change also fuses 34 new blocks during make.bash.
It is not clear that this fixes every variant of #29218,
but it is a reasonable standalone change.
And code like #29218 is rare and fundamentally buggy,
so we can handle new instances if/when they actually occur.
Fixes#29218
Negligible toolspeed impact.
name old time/op new time/op delta
Template 213ms ± 3% 213ms ± 2% ~ (p=0.914 n=97+88)
Unicode 89.8ms ± 2% 89.6ms ± 2% -0.22% (p=0.045 n=93+95)
GoTypes 712ms ± 3% 709ms ± 2% -0.35% (p=0.023 n=95+95)
Compiler 3.24s ± 2% 3.23s ± 2% -0.30% (p=0.020 n=98+97)
SSA 10.0s ± 1% 10.0s ± 1% ~ (p=0.382 n=98+99)
Flate 135ms ± 3% 135ms ± 2% ~ (p=0.983 n=98+98)
GoParser 158ms ± 2% 158ms ± 2% ~ (p=0.170 n=99+99)
Reflect 447ms ± 3% 447ms ± 2% ~ (p=0.538 n=98+89)
Tar 189ms ± 2% 189ms ± 3% ~ (p=0.874 n=95+96)
XML 251ms ± 2% 251ms ± 2% ~ (p=0.434 n=94+96)
[Geo mean] 427ms 426ms -0.15%
name old user-time/op new user-time/op delta
Template 264ms ± 2% 265ms ± 2% ~ (p=0.075 n=96+90)
Unicode 119ms ± 6% 119ms ± 7% ~ (p=0.864 n=99+98)
GoTypes 926ms ± 2% 924ms ± 2% ~ (p=0.071 n=94+94)
Compiler 4.38s ± 2% 4.37s ± 2% -0.34% (p=0.001 n=98+97)
SSA 13.4s ± 1% 13.4s ± 1% ~ (p=0.693 n=90+93)
Flate 162ms ± 3% 161ms ± 2% ~ (p=0.163 n=99+99)
GoParser 186ms ± 2% 186ms ± 3% ~ (p=0.130 n=96+100)
Reflect 572ms ± 3% 572ms ± 2% ~ (p=0.608 n=97+97)
Tar 239ms ± 2% 239ms ± 3% ~ (p=0.999 n=93+91)
XML 302ms ± 2% 302ms ± 2% ~ (p=0.627 n=91+97)
[Geo mean] 540ms 540ms -0.08%
file before after Δ %
asm 4862704 4858608 -4096 -0.084%
compile 24001568 24001680 +112 +0.000%
total 132520780 132516796 -3984 -0.003%
file before after Δ %
cmd/compile/internal/gc.a 8887638 8887596 -42 -0.000%
cmd/compile/internal/ssa.a 29995056 29998986 +3930 +0.013%
cmd/internal/obj/wasm.a 209444 203652 -5792 -2.765%
total 129471798 129469894 -1904 -0.001%
Change-Id: I2d18f9278e68b9766058ae8ca621e844f9d89dd8
Reviewed-on: https://go-review.googlesource.com/c/go/+/177140
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This test was designed for #15609 and didn't consider nacl. It's not
worth adding new +build-guarded assembly files in issue15609.dir for
nacl, especially as nacl is going away.
Fixes#32206
Change-Id: Ic5bd48b4f790a1f7019100b8a72d4688df75512f
Reviewed-on: https://go-review.googlesource.com/c/go/+/178698
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, some tests under test/fixedbugs never run:
$ for d in test/fixedbugs/*.dir; do
! test -f "${d%.dir}.go" && echo "$d"
done
test/fixedbugs/issue15071.dir
test/fixedbugs/issue15609.dir
test/fixedbugs/issue29612.dir
Because they missed the corresponding ".go" file, so "go run run.go"
will skip them.
Add missing ".go" files for those tests to make sure they will be
collected and run.
While at it, add another action "runindir", which does "go run ."
inside the t.goDirName then check the output.
Change-Id: I88000b3663a6a615d90c1cf11844ea0377403e3d
Reviewed-on: https://go-review.googlesource.com/c/go/+/177798
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
As an optimization, function literals capture variables by value when
they're not assigned and their address has not been taken. Because
result parameters are implicitly assigned through return statements
(which do not otherwise set the "assigned" flag), result parameters
are explicitly handled to always capture by reference.
However, the logic was slightly mistaken because it was only checking
if the variable in the immediately enclosing context was a return
parameter, whereas in a multiply-nested function literal it would
itself be another closure variable (PAUTOHEAP) rather than a return
parameter (PPARAMOUT).
The fix is to simply test the outermost variable, like the rest of the
if statement's tests were already doing.
Fixes#32175.
Change-Id: Ibadde033ff89a1b47584b3f56c0014d8e5a74512
Reviewed-on: https://go-review.googlesource.com/c/go/+/178541
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
First, remove the randomization of initialization order.
Then, revert to source code order instead of sorted package path order.
This restores the behavior that was in 1.12.
A larger change which will implement the suggestion in #31636 will
wait for 1.14. It's too complicated for 1.13 at this point (it has
tricky interactions with plugins).
Fixes#31636
Change-Id: I35b48e8cc21cf9f93c0973edd9193d2eac197628
Reviewed-on: https://go-review.googlesource.com/c/go/+/178297
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
typecheck type alias always replaces the original definition of the symbol.
This is wrong behavior because if the symbol's definition is replaced by a
local type alias, it ends up being written to compiled file as an alias,
instead of the original type.
To fix, only replace the definition of symbol with global type alias.
Fixes#31959
Change-Id: Id85a15e8a9d6a4b06727e655a95dc81e63df633a
Reviewed-on: https://go-review.googlesource.com/c/go/+/177378
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If a slice's entries are sparse, we decide to initialize it dynamically
instead of statically. That's CL 151319.
But if we do initialize it dynamically, we still need to initialize
the static entries. Typically we do that, but the bug fixed here is
that we don't if the entry's value is itself an array or struct.
To fix, use initKindLocalCode to ensure that both static and
dynamic entries are initialized via code.
Fixes#31987
Change-Id: I1192ffdbfb5cd50445c1206c4a3d8253295201dd
Reviewed-on: https://go-review.googlesource.com/c/go/+/176904
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
MOVBstore's value argument is a value, not a flag. We are storing
a byte so just use UInt8.
Fixes#31915.
Change-Id: Id799e5f44efc3a9c3d8480f6f25ad032c2a631bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/176719
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
This change is a simple work-around to avoid a compiler crash
and provide a reasonable error message. A future change should
fix the root cause for this problem.
Fixes#23823.
Change-Id: Ifc80d9f4d35e063c378e54d5cd8d1cf4c0d2ec6a
Reviewed-on: https://go-review.googlesource.com/c/go/+/175518
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Before this CL we used to panic with "nil pointer dereference" because
the value we're calling assignTo on is the zero Value. Provide a better
error message.
Fixes#28748
Change-Id: I7dd4c9e30b599863664d91e78cc45878d8b0052e
Reviewed-on: https://go-review.googlesource.com/c/go/+/175440
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
golang.org/cl/174498 add ONAME case to isStaticCompositeLiteral, to
detect global variable as compile-time constant.
It does report wrong for struct field, e.g:
o := one{i: two{i: 42}.i}
field i in two{i: 42} was reported as static composite literal, while it
should not.
In general, adding ONAME case for isStaticCompositeLiteral is probably
wrong.
Fixes#31782
Change-Id: Icde7d43bbb002b75df5c52b948b7126a4265e07b
Reviewed-on: https://go-review.googlesource.com/c/go/+/174837
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
golang.org/cl/174498 removes dynamic map entry handling in maplit, by
filtering the static entry only. It panics if it see a dynamic entry.
It relies on order to remove all dynamic entries.
But after recursively call order on the statics, some static entries
become dynamic, e.g OCONVIFACE node:
type i interface {
j()
}
type s struct{}
func (s) j() {}
type foo map[string]i
var f = foo{
"1": s{},
}
To fix it, we recursively call order on each static entry, if it changed
to dynamic, put entry to dynamic then.
Fixes#31777
Change-Id: I1004190ac8f2d1eaa4beb6beab989db74099b025
Reviewed-on: https://go-review.googlesource.com/c/go/+/174777
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In the statement x = a[i], the index panic should appear to come from
the line number of the '['. Previous to this CL we sometimes used the
line number of the '=' instead.
Fixes#29504
Change-Id: Ie718fd303c1ac2aee33e88d52c9ba9bcf220dea1
Reviewed-on: https://go-review.googlesource.com/c/go/+/174617
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Any code that imports the testing package forces the testing flags to be
defined, even in non-test binaries. People work around this today by
defining a copy of the testing.TB interface just to avoid importing
testing.
Fix this by moving flag registration into a new function, testing.Init.
Delay calling Init until the testing binary begins to run, in
testing.MainStart.
Init is exported for cases where users need the testing flags to be
defined outside of a "go test" context. In particular, this may be
needed where testing.Benchmark is called outside of a test.
Fixes#21051
Change-Id: Ib7e02459e693c26ae1ba71bbae7d455a91118ee3
Reviewed-on: https://go-review.googlesource.com/c/go/+/173722
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We already skipped blank field initialization in non-global contexts.
This change makes the global context treatment match.
Fixes#31546
Change-Id: I40acce49b0a9deb351ae0da098f4c114e425ec63
Reviewed-on: https://go-review.googlesource.com/c/go/+/173723
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This pair of packages caused a crash in gollvm, due to a glitch in the
way the front end handles empty/non-name parameters for functions that
are inline candidates.
Updates #31637.
Change-Id: I571c0658a00974dd36025e571638c0c836a3cdfd
Reviewed-on: https://go-review.googlesource.com/c/go/+/173617
Run-TryBot: Benny Siegert <bsiegert@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Stack object generation code was always using the local package name
for its symbol. Normally that doesn't matter, as we usually only
compile functions in the local package. But for wrappers, the compiler
generates functions which live in other packages. When there are two
other packages with identical functions to wrap, the same name appears
twice, and the compiler goes boom.
Fixes#31252
Change-Id: I7026eebabe562cb159b8b6046cf656afd336ba25
Reviewed-on: https://go-review.googlesource.com/c/go/+/171464
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The special case logic for go/defer arguments in Escape.call was
scattered around a bit and was somewhat inconsistently handled across
different types of function calls and parameters. This CL pulls the
logic out into a separate callStmt method that's used uniformly for
all kinds of function calls and arguments.
Fixes#31573.
Change-Id: Icdcdf611754dc3fcf1af7cb52879fb4b73a7a31f
Reviewed-on: https://go-review.googlesource.com/c/go/+/173019
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
In typecheckclosure, a xfunc node will be put to xtop. But that node can
be shared between multiple closures, like in a const declaration group:
const (
x = unsafe.Sizeof(func() {})
y
)
It makes a xfunc node appears multiple times in xtop, causing duplicate
initLSym run.
To fix this issue, we only do typecheck for xfunc one time, and setup
closure node earlier in typecheckclosure process.
Fixes#30709
Change-Id: Ic924a157ee9f3e5d776214bef5390849ddc8aab9
Reviewed-on: https://go-review.googlesource.com/c/go/+/172298
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The new escape analysis implementation tries to emit debugging
diagnostics that are compatible with the existing implementation, but
there's a handful of cases that are easier to handle by updating the
test expectations instead.
For regress tests that need updating, the original file is copied to
oldescapeXXX.go.go with -newescape=false added to the //errorcheck
line, while the file is updated in place with -newescape=true and new
test requirements.
Notable test changes:
1) escape_because.go looks for a lot of detailed internal debugging
messages that are fairly particular to how esc.go works and that I
haven't attempted to port over to escape.go yet.
2) There are a lot of "leaking param: x to result ~r1 level=-1"
messages for code like
func(p *int) *T { return &T{p} }
that were simply wrong. Here &T must be heap allocated unconditionally
(because it's being returned); and since p is stored into it, p
escapes unconditionally too. esc.go incorrectly reports that p escapes
conditionally only if the returned pointer escaped.
3) esc.go used to print each "leaking param" analysis result as it
discovered them, which could lead to redundant messages (e.g., that a
param leaks at level=0 and level=1). escape.go instead prints
everything at the end, once it knows the shortest path to each sink.
4) esc.go didn't precisely model direct-interface types, resulting in
some values unnecessarily escaping to the heap when stored into
non-escaping interface values.
5) For functions written in assembly, esc.go only printed "does not
escape" messages, whereas escape.go prints "does not escape" or
"leaking param" as appropriate, consistent with the behavior for
functions written in Go.
6) 12 tests included "BAD" annotations identifying cases where esc.go
was unnecessarily heap allocating something. These are all fixed by
escape.go.
Updates #23109.
Change-Id: Iabc9eb14c94c9cadde3b183478d1fd54f013502f
Reviewed-on: https://go-review.googlesource.com/c/go/+/170447
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
For a failed interface conversion not in ",ok" form, getitab
calls itab.init to get the name of the missing method for the
panic message. itab.init will try to find the methods, populate
the method table as it goes. When some method is missing, it sets
itab.fun[0] to 0 before return. There is a small window that
itab.fun[0] could be non-zero.
If concurrently, another goroutine tries to do the same interface
conversion, it will read the same itab's fun[0]. If this happens
in the small window, it sees a non-zero fun[0] and thinks the
conversion succeeded, which is bad.
Fix the race by setting fun[0] to non-zero only when we know the
conversion succeeds. While here, also simplify the syntax
slightly.
Fixes#31419.
Change-Id: Ied34d3043079eb933e330c5877b85e13f98f1916
Reviewed-on: https://go-review.googlesource.com/c/go/+/171759
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Some var declarations return "extra expression" or "missing expression"
errors when they should return “assignment mismatch” instead. Change
the returned error messages to exhibit the desired behavior.
Fixes#30085.
Change-Id: I7189355fbb0f976d70100779db4f81a9ae64fb11
Reviewed-on: https://go-review.googlesource.com/c/go/+/161558
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
For most nodes (e.g., OPTRLIT, OMAKESLICE, OCONVIFACE), escape
analysis prints "escapes to heap" or "does not escape" to indicate
whether that node's allocation can be heap or stack allocated.
These messages are also emitted for OADDR, even though OADDR does not
actually allocate anything itself. Moreover, it's redundant because
escape analysis already prints "moved to heap" diagnostics when an
OADDR node like "&x" causes x to require heap allocation.
Because OADDR nodes don't allocate memory, my escape analysis rewrite
doesn't naturally emit the "escapes to heap" / "does not escape"
diagnostics for them. It's also non-trivial to replicate the exact
semantics esc.go uses for OADDR.
Since there are so many of these messages, I'm disabling them in this
CL by themselves. I modified esc.go to suppress the Warnl calls
without any other behavior changes, and then used a shell script to
automatically remove any ERROR messages mentioned by run.go in
"missing error" or "no match for" lines.
Fixes#16300.
Updates #23109.
Change-Id: I3993e2743c3ff83ccd0893f4e73b366ff8871a57
Reviewed-on: https://go-review.googlesource.com/c/go/+/170319
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
The bug in 29612 is that there are two similar-looking anonymous interface
types in two different packages, ./p1/ssa and ./p2/ssa:
v.(interface{ foo() }).foo()
These types should be treated differently because the unexported method
makes the types different (according to the spec).
But when generating the type descriptors for those two types, they
both have the name "interface { ssa.foo() }". They thus get the same
symbol, and the linker happily unifies them. It picks an arbitrary one
for the runtime to use, but that breaks conversions from concrete types
that have a foo method from the package which had its interface type
overwritten.
We need to encode the metadata symbol for unexported methods as package
path qualified (The same as we did in CL 27791 for struct fields).
So switching from FmtUnsigned to Fmtleft by default fixes the issue.
In case of generating namedata, FmtUnsigned is used.
The benchmark result ends up in no significant change of compiled binary
compare to the immediate parent.
Fixes#29612
Change-Id: I775aff91ae4a1bb16eb18a48d55e3b606f3f3352
Reviewed-on: https://go-review.googlesource.com/c/go/+/170157
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Typechecking treats all untyped numbers as integers for the purposes
of validating operators. However, when I refactoring constant
operation evalution in golang.org/cl/139901, I mistakenly interpreted
that the only invalid case that needed to be preserved was % (modulo)
on floating-point values.
This CL restores the other remaining cases that were dropped from that
CL. It also uses the phrasing "invalid operation" instead of "illegal
constant expression" for better consistency with the rest of
cmd/compile and with go/types.
Lastly, this CL extends setconst to recognize failed constant folding
(e.g., division by zero) so that we can properly mark those
expressions as broken rather than continuing forward with bogus values
that might lead to further spurious errors.
Fixes#31060.
Change-Id: I1ab6491371925e22bc8b95649f1a0eed010abca6
Reviewed-on: https://go-review.googlesource.com/c/go/+/169719
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Update the issue 30908 test to work with the no-opt builder
(this requires a corresponding change in the linker as well).
As part of this change, 'rundir' tests are now linked without
passing "-w" to the linker.
Updates #30908.
Fixes#31034.
Change-Id: Ic776e1607075c295e409e1c8230aaf55a79a6323
Reviewed-on: https://go-review.googlesource.com/c/go/+/169161
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 135377 introduces pass strings and slices to convT2{E,I} by value.
Before that CL, all types, except interface will be allocated temporary
address. The CL changes the logic that only constant and type which
needs address (determine by convFuncName) will be allocated.
It fails to cover the case where type is static composite literal.
Adding condition to check that case fixes the issue.
Also, static composite literal node implies constant type, so consttype
checking can be removed.
Fixes#30956
Change-Id: Ifc750a029fb4889c2d06e73e44bf85e6ef4ce881
Reviewed-on: https://go-review.googlesource.com/c/go/+/168858
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Some special-case code paths in order.go didn't expect OCALLFUNC to
have Ninit; in particular, OAS2FUNC and ODEFER/OGO failed to call
o.init on their child OCALLFUNC node. This resulted in not all of the
AST being properly ordered.
This was noticed because order is responsible for introducing an
invariant around how OAPPEND is used, which is enforced by walk.
However, there were perhaps simpler cases (e.g., simple order of
evaluation) that were being silently miscompiled.
Fixes#31010.
Change-Id: Ib928890ab5ec2aebd8e30a030bc2b404387f9123
Reviewed-on: https://go-review.googlesource.com/c/go/+/169257
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
New test case designed to mimic the code in issue 30908, which
features duplicate but non-indentical DWARF abstract subprogram DIEs.
Updates #30908.
Change-Id: Iacb4b53e6a988e46c801cdac236cef883c553f8f
Reviewed-on: https://go-review.googlesource.com/c/go/+/168957
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
It is possible that a "volatile" value (one that can be clobbered
by preparing args of a call) to be used in multiple write barrier
calls. We used to copy the volatile value right before each call.
But this doesn't work if the value is used the second time, after
the first call where it is already clobbered. Copy it before
emitting any call.
Fixes#30977.
Change-Id: Iedcc91ad848d5ded547bf37a8359c125d32e994c
Reviewed-on: https://go-review.googlesource.com/c/go/+/168677
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The name change init -> init.ializers was initially required for
initialization code.
With CL 161337 there's no wrapper code any more, there's a data
structure instead (named .inittask). So we can go back to just
plain init appearing in tracebacks.
RELNOTE=yes
Update #29919. Followon to CL 161337.
Change-Id: I5a4a49d286df24b53b2baa193dfda482f3ea82a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/167780
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Instead of writing an init function per package that does the same
thing for every package, just write that implementation once in the
runtime. Change the compiler to generate a data structure that encodes
the required initialization operations.
Reduces cmd/go binary size by 0.3%+. Most of the init code is gone,
including all the corresponding stack map info. The .inittask
structures that replace them are quite a bit smaller.
Most usefully to me, there is no longer an init function in every -S output.
(There is an .inittask global there, but it's much less distracting.)
After this CL we could change the name of the "init.ializers" function
back to just "init".
Update #6853
R=go1.13
Change-Id: Iec82b205cc52fe3ade4d36406933c97dbc9c01b1
Reviewed-on: https://go-review.googlesource.com/c/go/+/161337
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
golang.org/cl/166983 started serializing the Ninit field of OCALL
nodes within function inline bodies (necessary to fix a regression in
building crypto/ecdsa with -gcflags=-l=4), but this means the Ninit
field needs to be typechecked when the imported function body is used.
It's unclear why this wasn't necessary for the crypto/ecdsa
regression.
Fixes#30907.
Change-Id: Id5f0bf3c4d17bbd6d5318913b859093c93a0a20c
Reviewed-on: https://go-review.googlesource.com/c/go/+/168199
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A few examples (for accessing a slice of length 3):
s[-1] runtime error: index out of range [-1]
s[3] runtime error: index out of range [3] with length 3
s[-1:0] runtime error: slice bounds out of range [-1:]
s[3:0] runtime error: slice bounds out of range [3:0]
s[3:-1] runtime error: slice bounds out of range [:-1]
s[3:4] runtime error: slice bounds out of range [:4] with capacity 3
s[0:3:4] runtime error: slice bounds out of range [::4] with capacity 3
Note that in cases where there are multiple things wrong with the
indexes (e.g. s[3:-1]), we report one of those errors kind of
arbitrarily, currently the rightmost one.
An exhaustive set of examples is in issue30116[u].out in the CL.
The message text has the same prefix as the old message text. That
leads to slightly awkward phrasing but hopefully minimizes the chance
that code depending on the error text will break.
Increases the size of the go binary by 0.5% (amd64). The panic functions
take arguments in registers in order to keep the size of the compiled code
as small as possible.
Fixes#30116
Change-Id: Idb99a827b7888822ca34c240eca87b7e44a04fdd
Reviewed-on: https://go-review.googlesource.com/c/go/+/161477
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This is a re-attempt at CL 153841, which caused two regressions:
1. crypto/ecdsa failed to build with -gcflags=-l=4. This was because
when "t1, t2, ... := g(); f(t1, t2, ...)" was exported, we were losing
the first assignment from the call's Ninit field.
2. net/http/pprof failed to run with -gcflags=-N. This is due to a
conflict with CL 159717: as of that CL, package-scope initialization
statements are executed within the "init.ializer" function, rather
than the "init" function, and the generated temp variables need to be
moved accordingly too.
[Rest of description is as before.]
This CL moves order.go's copyRet logic for rewriting f(g()) into t1,
t2, ... := g(); f(t1, t2, ...) earlier into typecheck. This allows the
rest of the compiler to stop worrying about multi-value functions
appearing outside of OAS2FUNC nodes.
This changes compiler behavior in a few observable ways:
1. Typechecking error messages for builtin functions now use general
case error messages rather than unnecessarily differing ones.
2. Because f(g()) is rewritten before inlining, saved inline bodies
now see the rewritten form too. This could be addressed, but doesn't
seem worthwhile.
3. Most notably, this simplifies escape analysis and fixes a memory
corruption issue in esc.go. See #29197 for details.
Fixes#15992.
Fixes#29197.
Change-Id: I930b10f7e27af68a0944d6c9bfc8707c3fab27a4
Reviewed-on: https://go-review.googlesource.com/c/go/+/166983
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The only ways to construct an OLITERAL node are (1) a basic literal
from the source package, (2) constant folding within evconst (which
only folds Go language constants), (3) the universal "nil" constant,
and (4) implicit conversions of nil to some concrete type.
Passes toolstash-check.
Change-Id: I30fc6b07ebede7adbdfa4ed562436cbb7078a2ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/166981
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
The CL 164718 adds new condition flags for floating-point comparisons
in arm64 backend, but dose not add the handling in rewrite.go for
corresponding Ops, which causes issue 30679. And this CL fixes this
issue.
Fixes#30679
Change-Id: I8acc749f78227c3e9e74fa7938f05fb442fb62c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/166579
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
New test for issue 30659 (compilation error due to bad
export data).
Updates #30659.
Change-Id: I2541ee3c379e5b22033fea66bb4ebaf720cc5e1f
Reviewed-on: https://go-review.googlesource.com/c/go/+/166917
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
First the insidious bug:
var n uintptr
for n := elemPtrs; n > 120; n -= 120 {
prog = append(prog, 120)
prog = append(prog, mask[:15]...)
mask = mask[15:]
}
prog = append(prog, byte(n))
prog = append(prog, mask[:(n+7)/8]...)
The := breaks this code, because the n after the loop is always 0!
We also do need to handle field padding correctly. In particular
the old padding code doesn't correctly handle fields that are not
a multiple of a pointer in size.
Fixes#30606.
Change-Id: Ifcab9494dc25c20116753c5d7e0145d6c2053ed8
Reviewed-on: https://go-review.googlesource.com/c/go/+/165860
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
They are missing a stop byte at the end.
Normally this doesn't matter, but when including a GC program
in another GC program, we strip the last byte. If that last byte
wasn't a stop byte, then we've thrown away part of the program
we actually need.
Fixes#30606
Change-Id: Ie9604beeb84f7f9442e77d31fe64c374ca132cce
Reviewed-on: https://go-review.googlesource.com/c/go/+/165857
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Make sure the side effects inside short-circuited operations (&& and ||)
happen correctly.
Before this CL, we attached the side effects to the node itself using
exprInPlace. That caused other side effects in sibling expressions
to get reordered with respect to the short circuit side effect.
Instead, rewrite a && b like:
r := a
if r {
r = b
}
That code we can keep correctly ordered with respect to other
side-effects extracted from part of a big expression.
exprInPlace seems generally unsafe. But this was the only case where
exprInPlace is called not at the top level of an expression, so I
don't think the other uses can actually trigger an issue (there can't
be a sibling expression). TODO: maybe those cases don't need "in
place", and we can retire that function generally.
This CL needed a small tweak to the SSA generation of OIF so that the
short circuit optimization still triggers. The short circuit optimization
looks for triangle but not diamonds, so don't bother allocating a block
if it will be empty.
Go 1 benchmarks are in the noise.
Fixes#30566
Change-Id: I19c04296bea63cbd6ad05f87a63b005029123610
Reviewed-on: https://go-review.googlesource.com/c/go/+/165617
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Currently, runtime.KeepAlive applied on a stack object doesn't
actually keeps the stack object alive, and the heap object
referenced from it could be collected. This is because the
address of the stack object is rematerializeable, and we just
ignored KeepAlive on rematerializeable values. This CL fixes it.
Fixes#30476.
Change-Id: Ic1f75ee54ed94ea79bd46a8ddcd9e81d01556d1d
Reviewed-on: https://go-review.googlesource.com/c/164537
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL moves order.go's copyRet logic for rewriting f(g()) into t1,
t2, ... = g(); f(t1, t2, ...) earlier into typecheck. This allows the
rest of the compiler to stop worrying about multi-value functions
appearing outside of OAS2FUNC nodes.
This changes compiler behavior in a few observable ways:
1. Typechecking error messages for builtin functions now use general
case error messages rather than unnecessarily differing ones.
2. Because f(g()) is rewritten before inlining, saved inline bodies
now see the rewritten form too. This could be addressed, but doesn't
seem worthwhile.
3. Most notably, this simplifies escape analysis and fixes a memory
corruption issue in esc.go. See #29197 for details.
Fixes#15992.
Fixes#29197.
Change-Id: I86a70668301efeec8fbd11fe2d242e359a3ad0af
Reviewed-on: https://go-review.googlesource.com/c/153841
Reviewed-by: Robert Griesemer <gri@golang.org>
isGoConst could spuriously return true for variables that shadow a
constant declaration with the same name.
Because even named constants are always represented by OLITERAL nodes,
the easy fix is to just ignore ONAME nodes in isGoConst. We can
similarly ignore ONONAME nodes.
Confirmed that k8s.io/kubernetes/test/e2e/storage builds again with
this fix.
Fixes#30430.
Change-Id: I899400d749982d341dc248a7cd5a18277c2795ec
Reviewed-on: https://go-review.googlesource.com/c/164319
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
If a type switch case expression has failed typechecking, the case body is
likely to also fail with confusing or spurious errors. Suppress
typechecking the case body when this happens.
Fixes#28926
Change-Id: Idfdb9d5627994f2fd90154af1659e9a92bf692c4
Reviewed-on: https://go-review.googlesource.com/c/158617
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Consistent logic for handling both duplicate map keys and case values,
and eliminates ad hoc value hashing code.
Also makes cmd/compile consistent with go/types's handling of
duplicate constants (see #28085), which is at least an improvement
over the status quo even if we settle on something different for the
spec.
As a side effect, this also suppresses cmd/compile's warnings about
duplicate nils in (non-interface expression) switch statements, which
was technically never allowed by the spec anyway.
Updates #28085.
Updates #28378.
Change-Id: I176a251e770c3c5bc11c2bf8d1d862db8f252a17
Reviewed-on: https://go-review.googlesource.com/c/152544
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
When looking for the field specified in a composite literal, check that
the specified name is actually a field and not a method.
Fixes#29855.
Change-Id: Id77666e846f925907b1eec64213b1d25af8a2466
Reviewed-on: https://go-review.googlesource.com/c/158938
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
There are several places where a new (internal) complex constant is allocated
via new(Mpcplx) rather than newMpcmplx(). The problem with using new() is that
the Mpcplx data structure's Real and Imag components don't get initialized with
an Mpflt of the correct precision (they have precision 0, which may be adjusted
later).
In all cases but one, the components of those complex constants are set using
a Set operation which "inherits" the correct precision from the value that is
being set.
But when creating a complex value for an imaginary literal, the imaginary
component is set via SetString which assumes 64bits of precision by default.
As a result, the internal representation of 0.01i and complex(0, 0.01) was
not correct.
Replaced all used of new(Mpcplx) with newMpcmplx() and added a new test.
Fixes#30243.
Change-Id: Ife7fd6ccd42bf887a55c6ce91727754657e6cb2d
Reviewed-on: https://go-review.googlesource.com/c/163000
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 154057 adds guards agaist out-of-bound reads from readonly
constants. It turns out that in dead code, the offset can also
be negative. Guard against negative offset as well.
Fixes#30257.
Change-Id: I47c2a2e434dd466c08ae6f50f213999a358c796e
Reviewed-on: https://go-review.googlesource.com/c/162819
Reviewed-by: Keith Randall <khr@golang.org>
Allow shifts by signed amounts. Panic if the shift amount is negative.
TODO: We end up doing two compares per shift, see Ian's comment
https://github.com/golang/go/issues/19113#issuecomment-443241799 that
we could do it with a single comparison in the normal case.
The prove pass mostly handles this code well. For instance, it removes the
<0 check for cases like this:
if s >= 0 { _ = x << s }
_ = x << len(a)
This case isn't handled well yet:
_ = x << (y & 0xf)
I'll do followon CLs for unhandled cases as needed.
Update #19113
R=go1.13
Change-Id: I839a5933d94b54ab04deb9dd5149f32c51c90fa1
Reviewed-on: https://go-review.googlesource.com/c/158719
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This CL introduces compiler support for the new binary and octal integer
literals, hexadecimal floats, and digit separators for all number literals.
The new Go 2 number literal scanner accepts the following liberal format:
number = [ prefix ] digits [ "." digits ] [ exponent ] [ "i" ] .
prefix = "0" [ "b" |"B" | "o" | "O" | "x" | "X" ] .
digits = { digit | "_" } .
exponent = ( "e" | "E" | "p" | "P" ) [ "+" | "-" ] digits .
If the number starts with "0x" or "0X", digit is any hexadecimal digit;
otherwise, digit is any decimal digit. If the accepted number is not valid,
errors are reported accordingly.
See the new test cases in scanner_test.go for a selection of valid and
invalid numbers and the respective error messages.
R=Go1.13
Updates #12711.
Updates #19308.
Updates #28493.
Updates #29008.
Change-Id: Ic8febc7bd4dc5186b16a8c8897691e81125cf0ca
Reviewed-on: https://go-review.googlesource.com/c/157677
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Make sure the argument to memmove is of pointer type before we try to
get the element type.
This has been noticed for code that uses unsafe+linkname so it can
call runtime.memmove. Probably not the best thing to allow, but the
code is out there and we'd rather not break it unnecessarily.
Fixes#30061
Change-Id: I334a8453f2e293959fd742044c43fbe93f0b3d31
Reviewed-on: https://go-review.googlesource.com/c/160826
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We are copying the results to uninitialized stack space. Write
barrier is not needed.
Fixes#30041.
Change-Id: Ia91d74dbafd96dc2bd92de0cb479808991dda03e
Reviewed-on: https://go-review.googlesource.com/c/160737
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Treat compiler-generated init functions as wrappers, so they will not
be shown in tracebacks.
The exception to this rule is that we'd like to show the line number
of initializers for global variables in tracebacks. In order to
preserve line numbers for those cases, separate out the code for those
initializers into a separate function (which is not marked as
autogenerated).
This CL makes the go binary 0.2% bigger.
Fixes#29919
Change-Id: I0f1fbfc03d10d764ce3a8ddb48fb387ca8453386
Reviewed-on: https://go-review.googlesource.com/c/159717
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Whether a truncation should become a MOVWreg or a MOVWZreg doesn't
depend on the type of the operand, it depends on the type of the final
result. If the final result is unsigned, we can use MOVWZreg. If the
final result is signed, we can use MOVWreg. Checking the type of the
operand does the wrong thing if truncating an unsigned value to a
signed value, or vice-versa.
Fixes#29943
Change-Id: Ia6fc7d006486fa02cffd0bec4d910bdd5b6365f8
Reviewed-on: https://go-review.googlesource.com/c/159760
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
They can't be used, so we don't need code generated for them. We just
need to report errors in their bodies.
This is the minimal CL for 1.12. For 1.13, CL 158845 will remove
a bunch of special cases sprinkled about the compiler to handle "_"
functions, which should (after this CL) be unnecessary.
Update #29870
Change-Id: Iaa1c194bd0017dffdce86589fe2d36726ee83c13
Reviewed-on: https://go-review.googlesource.com/c/158820
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reuse the strict mechanism from FileLine for FuncForPC, so we don't
crash when asking the pcln table about bad pcs.
Fixes#29735
Change-Id: Iaffb32498b8586ecf4eae03823e8aecef841aa68
Reviewed-on: https://go-review.googlesource.com/c/157799
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Normally this happens when combining a sign extension and a load. We
want the resulting combo-instruction to get the line number of the
load, not the line number of the sign extension.
For each rule, compute where we should get its line number by finding
a value on the match side that can fault. Use that line number for
all the new values created on the right-hand side.
Fixes#27201
Change-Id: I19b3c6f468fff1a3c0bfbce2d6581828557064a3
Reviewed-on: https://go-review.googlesource.com/c/156937
Reviewed-by: David Chase <drchase@google.com>
Currently, obj.Ctxt's symbol table does not distinguish between ABI0
and ABIInternal symbols. This is *almost* okay, since a given symbol
name in the final object file is only going to belong to one ABI or
the other, but it requires that the compiler mark a Sym as being a
function symbol before it retrieves its LSym. If it retrieves the LSym
first, that LSym will be created as ABI0, and later marking the Sym as
a function symbol won't change the LSym's ABI.
Marking a Sym as a function symbol before looking up its LSym sounds
easy, except Syms have a dual purpose: they are used just as interned
strings (every function, variable, parameter, etc with the same
textual name shares a Sym), and *also* to store state for whatever
package global has that name. As a result, it's easy to slip up and
look up an LSym when a Sym is serving as the name of a local variable,
and then later mark it as a function when it's serving as the global
with the name.
In general, we were careful to avoid this, but #29610 demonstrates one
case where we messed up. Because of on-demand importing from indexed
export data, it's possible to compile a method wrapper for a type
imported from another package before importing an init function from
that package. If the argument of the method is named "init", the
"init" LSym will be created as a data symbol when compiling the
wrapper, before it gets marked as a function symbol.
To fix this, we separate obj.Ctxt's symbol tables for ABI0 and
ABIInternal symbols. This way, the compiler will simply get a
different LSym once the Sym takes on its package-global meaning as a
function.
This fixes the above ordering issue, and means we no longer need to go
out of our way to create the "init" function early and mark it as a
function symbol.
Fixes#29610.
Updates #27539.
Change-Id: Id9458b40017893d46ef9e4a3f9b47fc49e1ce8df
Reviewed-on: https://go-review.googlesource.com/c/157017
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The compiler appears to contain several squirrelly corner
cases where nodes are double walked, some where new nodes
are created from walked parts. Rather than trust that we
had searched hard enough for the last one, change
exprSwitch.walk() to return immediately if it has already
been walked. This appears to be the only case where
double-walking a node is actually harmful.
Fixes#29562.
Change-Id: I0667e8769aba4c3236666cd836a934e256c0bfc5
Reviewed-on: https://go-review.googlesource.com/c/156317
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
As a followon to CL 152537, modify the panic-printing traceback
to also handle mid-stack inlining correctly.
Also declare -fm functions (aka method functions) as wrappers, so that
they get elided during traceback. This fixes part 2 of #26839.
Fixes#28640Fixes#24488
Update #26839
Change-Id: I1c535a9b87a9a1ea699621be1e6526877b696c21
Reviewed-on: https://go-review.googlesource.com/c/153477
Reviewed-by: David Chase <drchase@google.com>
Use the length of the bitmap to decide how much to pass to the
write barrier, not the total length of the arguments.
The test needs enough arguments so that two distinct bitmaps
get interpreted as a single longer bitmap.
Update #29362
Change-Id: I78f3f7f9ec89c2ad4678f0c52d3d3def9cac8e72
Reviewed-on: https://go-review.googlesource.com/c/156123
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
CL 155917 added a -race test that shouldn't be run when cgo is not
enabled. Enforce this in the test file, with a buildflag.
Fixes the nocgo builder.
Change-Id: I9fe0d8f21da4d6e2de3f8fe9395e1fa7e9664b02
Reviewed-on: https://go-review.googlesource.com/c/155957
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reorg map flags a bit so we don't need any extra space for the extra flag.
Fixes#23734
Change-Id: I436812156240ae90de53d0943fe1aabf3ea37417
Reviewed-on: https://go-review.googlesource.com/c/155918
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
We can't remove race instrumentation unless there are no calls,
not just no static calls. Closure and interface calls also count.
The problem in issue 29329 is that there was a racefuncenter, an
InterCall, and a racefuncexit. The racefuncenter was removed, then
the InterCall was rewritten to a StaticCall. That prevented the
racefuncexit from being removed. That caused an imbalance in
racefuncenter/racefuncexit calls, which made the race detector barf.
Bug introduced at CL 121235
Fixes#29329
Change-Id: I2c94ac6cf918dd910b74b2a0de5dc2480d236f16
Reviewed-on: https://go-review.googlesource.com/c/155917
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Work involved in getting a stack trace is divided between
runtime.Callers and runtime.CallersFrames.
Before this CL, runtime.Callers returns a pc per runtime frame.
runtime.CallersFrames is responsible for expanding a runtime frame
into potentially multiple user frames.
After this CL, runtime.Callers returns a pc per user frame.
runtime.CallersFrames just maps those to user frame info.
Entries in the result of runtime.Callers are now pcs
of the calls (or of the inline marks), not of the instruction
just after the call.
Fixes#29007Fixes#28640
Update #26320
Change-Id: I1c9567596ff73dc73271311005097a9188c3406f
Reviewed-on: https://go-review.googlesource.com/c/152537
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
(SGTconst [c] (SRLconst _ [d])) && 0 <= int32(c) && uint32(d) <= 31 && 1<<(32-uint32(d)) <= int32(c) -> (MOVWconst [1])
This rule is problematic. 1<<(32-uint32(d)) <= int32(c) meant to
say that it is true if c is greater than the largest possible
value of the right shift. But when d==1, 1<<(32-1) is negative
and results in the wrong comparison.
Rewrite the rules in a more direct way.
Fixes#29402.
Change-Id: I5940fc9538d9bc3a4bcae8aa34672867540dc60e
Reviewed-on: https://go-review.googlesource.com/c/155798
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Method expressions where the method is implicitly declared have no
line number. The Error method of the built-in error type is one such
method. We leave the line number at the use of the method expression
in this case.
Fixes#29389
Change-Id: I29c64bb47b1a704576abf086599eb5af7b78df53
Reviewed-on: https://go-review.googlesource.com/c/155639
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It was possible that
var X interface{} = 'x'
could cause a compilation failure due to having not calculated rune's
width yet. typecheck.go normally calculates the width of things, but
it doesn't for implicit conversions to default type. We already
compute the width of all of the standard numeric types in universe.go,
but we failed to calculate it for the rune alias type. So we could
later crash if the code never otherwise explicitly mentioned 'rune'.
While here, explicitly compute widths for 'byte' and 'error' for
consistency.
Fixes#29350.
Change-Id: Ifedd4899527c983ee5258dcf75aaf635b6f812f8
Reviewed-on: https://go-review.googlesource.com/c/155380
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Out-of-bounds reads of globals can happen in dead code. For code
like this:
s := "a"
if len(s) == 3 {
load s[0], s[1], and s[2]
}
The out-of-bounds loads are dead code, but aren't removed yet
when lowering. We need to not panic when compile-time evaluating
those loads. This can only happen for dead code, so the result
doesn't matter.
Fixes#29215
Change-Id: I7fb765766328b9524c6f2a1e6ab8d8edd9875097
Reviewed-on: https://go-review.googlesource.com/c/154057
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
The formatting routines for types use a depth limit as primitive
mechanism to detect cycles. For now, increase the limit from 100
to 250 and file #29312 so we don't drop this on the floor.
Also, adjust some fatal error messages elsewhere to use
better formatting.
Fixes#29264.
Updates #29312.
Change-Id: Idd529f6682d478e0dcd2d469cb802192190602f6
Reviewed-on: https://go-review.googlesource.com/c/154583
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When a println arg contains a call to an inlineable function
that itself contains a switch, that switch statement will be
walked twice, once by the walkexprlist formerly in the
OPRINT/OPRINTN case, then by walkexprlistcheap in walkprint.
Remove the first walkexprlist, it is not necessary.
walkexprlist =
s[i] = walkexpr(s[i], init)
walkexprlistcheap = {
s[i] = cheapexpr(n, init)
s[i] = walkexpr(s[i], init)
}
Seems like this might be possible in other places, i.e.,
calls to inlineable switch-containing functions.
See also #25776.
Fixes#29220.
Change-Id: I3781e86aad6688711597b8bee9bc7ebd3af93601
Reviewed-on: https://go-review.googlesource.com/c/154497
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
A prior optimization (https://golang.org/cl/106175) removed the
generation of unnecessary method expression wrappers, but also
eliminated the generation of the wrapper for error.Error which
was still required.
Special-case error type in the optimization.
Fixes#29304.
Change-Id: I54c8afc88a2c6d1906afa2d09c68a0a3f3e2f1e3
Reviewed-on: https://go-review.googlesource.com/c/154578
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Instead of testing len(slice)+numNewElements > cap(slice) use
uint(len(slice)+numNewElements) > uint(cap(slice)) to test
if a slice needs to be grown in an append operation.
This prevents a possible overflow when len(slice) is near the maximum
int value and the addition of a constant number of new elements
makes it overflow and wrap around to a negative number which is
smaller than the capacity of the slice.
Appending a slice to a slice with append(s1, s2...) already used
a uint comparison to test slice capacity and therefore was not
vulnerable to the same overflow issue.
Fixes: #29190
Change-Id: I41733895838b4f80a44f827bf900ce931d8be5ca
Reviewed-on: https://go-review.googlesource.com/c/154037
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
By combining the load+op, we may force the op to happen earlier in
the store chain. That might force the SymAddr operation earlier, and
in particular earlier than its corresponding VarDef. That leads to
an invalid schedule, so avoid that.
This is kind of a hack to work around the issue presented. I think
the underlying problem, that LEAQ is not directly ordered with respect
to its vardef, is the real problem. The benefit of this CL is that
it fixes the immediate issue, is small, and obviously won't break
anything. A real fix for this issue is much more invasive.
The go binary is unchanged in size.
This situation just doesn't occur very often.
Fixes#28445
Change-Id: I13a765e13f075d5b6808a355ef3c43cdd7cd47b6
Reviewed-on: https://go-review.googlesource.com/c/153641
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
IsSliceInBounds(x, y) asserts that y is not negative, but
there were cases where this is not true. Change code
generation to ensure that this is true when it's not obviously
true. Prove phase cleans a few of these out.
With this change the compiler text section is 0.06% larger,
that is, not very much. Benchmarking still TBD, may need
to wait for access to a benchmarking box (next week).
Also corrected run.go to handle '?' in -update_errors output.
Fixes#28797.
Change-Id: Ia8af90bc50a91ae6e934ef973def8d3f398fac7b
Reviewed-on: https://go-review.googlesource.com/c/152477
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously, when a function signature had defined a non-final variadic
parameter, the error message always referred to the type associated with that
parameter. However, if the offending parameter's name was part of an identifier
list with a variadic type, one could misinterpret the message, thinking the
problem had been with one of the other names in the identifer list.
func bar(a, b ...int) {}
clear ~~~~~~~^ ^~~~~~~~ confusing
This change updates the error message and sets the column position to that of
the offending parameter's name, if it exists.
Fixes#28450.
Change-Id: I076f560925598ed90e218c25d70f9449ffd9b3ea
Reviewed-on: https://go-review.googlesource.com/c/152417
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
staticcopy of a struct or array should recursively call itself, not
staticassign.
This fixes an issue where a struct with a slice in it is copied during
static initialization. In this case, the backing array for the slice
is duplicated, and each copy of the slice refers to a different
backing array, which is incorrect. That issue has existed since at
least Go 1.2.
I'm not sure why this was never noticed. It seems like a pretty
obvious bug if anyone modifies the resulting slice.
In any case, we started to notice when the optimization in CL 140301
landed. Here is basically what happens in issue29013b.go:
1) The error above happens, so we get two backing stores for what
should be the same slice.
2) The code for initializing those backing stores is reused.
But not duplicated: they are the same Node structure.
3) The order pass allocates temporaries for the map operations.
For the first instance, things work fine and two temporaries are
allocated and stored in the OKEY nodes. For the second instance,
the order pass decides new temporaries aren't needed, because
the OKEY nodes already have temporaries in them.
But the order pass also puts a VARKILL of the temporaries between
the two instance initializations.
4) In this state, the code is technically incorrect. But before
CL 140301 it happens to work because the temporaries are still
correctly initialized when they are used for the second time. But then...
5) The new CL 140301 sees the VARKILLs and decides to reuse the
temporary for instance 1 map 2 to initialize the instance 2 map 1
map. Because the keys aren't re-initialized, instance 2 map 1
gets the wrong key inserted into it.
Fixes#29013
Change-Id: I840ce1b297d119caa706acd90e1517a5e47e9848
Reviewed-on: https://go-review.googlesource.com/c/152081
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
A Go user made a well-documented request for a slightly
lower threshold. I tested against a selection of other
people's benchmarks, and saw a tiny benefit (possibly noise)
at equally tiny cost, and no unpleasant surprises observed
in benchmarking.
I.e., might help, doesn't hurt, low risk, request was
delivered on a silver platter.
It did, however, change the behavior of one test because
now bytes.Buffer.Grow is eligible for inlining.
Updates #19348.
Change-Id: I85e3088a4911290872b8c6bda9601b5354c48695
Reviewed-on: https://go-review.googlesource.com/c/151977
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
While here, rename nonnegintconst to indexconst (because that's
what it is) and add Fatalf calls where we are not expecting the
indexconst call to fail, and fixed wrong comparison in smallintconst.
Fixes#23781.
Change-Id: I86eb13081c450943b1806dfe3ae368872f76639a
Reviewed-on: https://go-review.googlesource.com/c/151599
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Don't convert values that aren't Go constants, like
uintptr(unsafe.Pointer(nil)), to a literal constant. This avoids
assuming they are constants for things like indexing, array sizes,
case duplication, etc.
Also, nil is an allowed duplicate in switches. CTNILs aren't Go constants.
Fixes#28078Fixes#28079
Change-Id: I9ab8af47098651ea09ef10481787eae2ae2fb445
Reviewed-on: https://go-review.googlesource.com/c/151320
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When a slice composite literal is sparse, initialize it dynamically
instead of statically.
s := []int{5:5, 20:20}
To initialize the backing store for s, use 2 constant writes instead
of copying from a static array with 21 entries.
This CL also fixes pathologies in the compiler when the slice is
*very* sparse.
Fixes#23780
Change-Id: Iae95c6e6f6a0e2994675cbc750d7a4dd6436b13b
Reviewed-on: https://go-review.googlesource.com/c/151319
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Abort evconst if its argument isn't a Go constant. The SSA backend
will do the optimizations in question later. They tend to be weird
cases, like uintptr(unsafe.Pointer(uintptr(1))).
Fix OADDSTR and OCOMPLEX cases in isGoConst.
OADDSTR has its arguments in n.List, not n.Left and n.Right.
OCOMPLEX might have a 2-result function as its arg in List[0]
(in which case it isn't a Go constant).
Fixes#24760
Change-Id: Iab312d994240d99b3f69bfb33a443607e872b01d
Reviewed-on: https://go-review.googlesource.com/c/151338
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In assembly free packages (aka "complete" or "pure go"), allow
bodyless functions if they are linkname'd to something else.
Presumably the thing the function is linkname'd to has a definition.
If not, the linker will complain. And linkname is unsafe, so we expect
users to know what they are doing.
Note this handles only one direction, where the linkname directive
is in the local package. If the linkname directive is in the remote
package, this CL won't help. (See os/signal/sig.s for an example.)
Fixes#23311
Change-Id: I824361b4b582ee05976d94812e5b0e8b0f7a18a6
Reviewed-on: https://go-review.googlesource.com/c/151318
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This commit allows the runtime to handle 64bits addresses returned by
mmap syscall on AIX.
Mmap syscall returns addresses on 59bits on AIX. But the Arena
implementation only allows addresses with less than 48 bits.
This commit increases the arena size up to 1<<60 for aix/ppc64.
Update: #25893
Change-Id: Iea72e8a944d10d4f00be915785e33ae82dd6329e
Reviewed-on: https://go-review.googlesource.com/c/138736
Reviewed-by: Austin Clements <austin@google.com>
When using soft-float, OMUL might be rewritten to function call
so we should ensure it was evaluated first.
Fixes#28688
Change-Id: I30b87501782fff62d35151f394a1c22b0d490c6c
Reviewed-on: https://go-review.googlesource.com/c/148837
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Because run.go doesn't pass the package being compiled to the compiler
via the -p flag, it can't match up the main·f symbol from the
assembler with the "func f" stub in Go, so it doesn't produce the
correct assembly stub.
Fix this by removing the package prefix from the assembly definition.
Alternatively, we could make run.go pass -p to the compiler, but it's
nicer to remove these package prefixes anyway.
Should fix the linux-arm builder, which was broken by the introduction
of function ABIs in CL 147160.
Updates #27539.
Change-Id: Id62b7701e1108a21a5ad48ffdb5dad4356c273a6
Reviewed-on: https://go-review.googlesource.com/c/149483
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
When we set an explicit argmap, we may want only a prefix of that
argmap. Argmap is set when the function is reflect.makeFuncStub or
reflect.methodValueCall. In this case, arglen specifies how much of
the args section is actually live. (It could be either all the args +
results, or just the args.)
Fixes#28750
Change-Id: Idf060607f15a298ac591016994e58e22f7f92d83
Reviewed-on: https://go-review.googlesource.com/c/149217
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
We have an existing optimization that recognizes
memory moves of the form A -> B -> C and converts
them into A -> C, in the hopes that the store to
B will be end up being dead and thus eliminated.
However, when A, B, and C are large types,
the front end sometimes emits VarDef ops for the moves.
This change adds an optimization to match that pattern.
This required changing an old compiler test.
The test assumed that a temporary was required
to deal with a large return value.
With this optimization in place, that temporary
ended up being eliminated.
Triggers 649 times during 'go build -a std cmd'.
Cuts 16k off cmd/go.
name old object-bytes new object-bytes delta
Template 507kB ± 0% 507kB ± 0% -0.15% (p=0.008 n=5+5)
Unicode 225kB ± 0% 225kB ± 0% ~ (all equal)
GoTypes 1.85MB ± 0% 1.85MB ± 0% ~ (all equal)
Flate 328kB ± 0% 328kB ± 0% ~ (all equal)
GoParser 402kB ± 0% 402kB ± 0% -0.00% (p=0.008 n=5+5)
Reflect 1.41MB ± 0% 1.41MB ± 0% -0.20% (p=0.008 n=5+5)
Tar 458kB ± 0% 458kB ± 0% ~ (all equal)
XML 601kB ± 0% 599kB ± 0% -0.21% (p=0.008 n=5+5)
Change-Id: I9b5f25c8663a0b772ad1ee51fa61f74b74d26dd3
Reviewed-on: https://go-review.googlesource.com/c/143479
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
This is a simple tweak to allow a bit more mid-stack inlining.
In cases like this:
func f() {
g()
}
We'd really like to inline f into its callers. It can't hurt.
We implement this optimization by making calls a bit cheaper, enough
to afford a single call in the function body, but not 2.
The remaining budget allows for some argument modification, or perhaps
a wrapping conditional:
func f(x int) {
g(x, 0)
}
func f(x int) {
if x > 0 {
g()
}
}
Update #19348
Change-Id: Ifb1ea0dd1db216c3fd5c453c31c3355561fe406f
Reviewed-on: https://go-review.googlesource.com/c/147361
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
Dead-code eliminating labels is tricky because there might
be gotos that can still reach them.
Bug probably introduced with CL 91056
Fixes#28616
Change-Id: I6680465134e3486dcb658896f5172606cc51b104
Reviewed-on: https://go-review.googlesource.com/c/147817
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Iskander Sharipov <iskander.sharipov@intel.com>
This change re-introduces (temporarily) a work-around for recursive
alias type declarations, originally in https://golang.org/cl/35831/
(intended as fix for #18640). The work-around was removed later
for a more comprehensive cycle detection check. That check
contained a subtle error which made the code appear to work,
while in fact creating incorrect types internally. See #25838
for details.
By re-introducing the original work-around, we eliminate problems
with many simple recursive type declarations involving aliases;
specifically cases such as #27232 and #27267. However, the more
general problem remains.
This CL also fixes the subtle error (incorrect variable use when
analyzing a type cycle) mentioned above and now issues a fatal
error with a reference to the relevant issue (rather than crashing
later during the compilation). While not great, this is better
than the current status. The long-term solution will need to
address these cycles (see #25838).
As a consequence, several old test cases are not accepted anymore
by the compiler since they happened to work accidentally only.
This CL disables parts or all code of those test cases. The issues
are: #18640, #23823, and #24939.
One of the new test cases (fixedbugs/issue27232.go) exposed a
go/types issue. The test case is excluded from the go/types test
suite and an issue was filed (#28576).
Updates #18640.
Updates #23823.
Updates #24939.
Updates #25838.
Updates #28576.
Fixes#27232.
Fixes#27267.
Change-Id: I6c2d10da98bfc6f4f445c755fcaab17fc7b214c5
Reviewed-on: https://go-review.googlesource.com/c/147286
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This reverts commit 9ce87a63b9.
The fix addresses the specific test case, but not the general
problem.
Updates #24755.
Change-Id: I0ba8463b41b099b1ebf49759f88a423b40f70d58
Reviewed-on: https://go-review.googlesource.com/c/145617
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This way, once the constant declarations are typechecked, all named
types are fully typechecked and have all of their methods added.
Usually this isn't important, as methods and interfaces cannot be used
in constant declarations. However, it can lead to confusing and
incorrect errors, such as:
$ cat f.go
package p
type I interface{ F() }
type T struct{}
const _ = I(T{})
func (T) F() {}
$ go build f.go
./f.go:6:12: cannot convert T literal (type T) to type I:
T does not implement I (missing F method)
The error is clearly wrong, as T does have an F method. If we ensure
that all funcs are typechecked before all constant declarations, we get
the correct error:
$ go build f2.go
# command-line-arguments
./f.go:6:7: const initializer I(T literal) is not a constant
Fixes#24755.
Change-Id: I182b60397b9cac521d9a9ffadb11b42fd42e42fe
Reviewed-on: https://go-review.googlesource.com/c/115096
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
CL 114797 reworked how arguments get written to the stack.
Some type conversions got lost in the process. Restore them.
Fixes#28390
Updates #28430
Change-Id: Ia0d37428d7d615c865500bbd1a7a4167554ee34f
Reviewed-on: https://go-review.googlesource.com/c/144598
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If a field and method have the same name, mark the respective struct field
so that we don't report follow-on errors when the field/method is accessed.
Per suggestion of @mdempsky.
Fixes#28268.
Change-Id: Ia1ca4cdfe9bacd3739d1fd7ca5e014ca094245ee
Reviewed-on: https://go-review.googlesource.com/c/144259
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The second and subsequent return values from f() need to be
converted to the element type of the first return value from f()
(which must be a slice).
Fixes#22327
Change-Id: I5c0a424812c82c1b95b6d124c5626cfc4408bdb6
Reviewed-on: https://go-review.googlesource.com/c/142718
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
As of https://golang.org/cl/43456 gccgo now gives a better error
message for this test.
Before:
fixedbugs/issue5089.go:13:1: error: redefinition of ‘bufio.Buffered’: receiver name changed
func (b *bufio.Reader) Buffered() int { // ERROR "non-local|redefinition"
^
fixedbugs/issue5089.go:11:13: note: previous definition of ‘bufio.Buffered’ was here
import "bufio" // GCCGO_ERROR "previous"
^
Now:
fixedbugs/issue5089.go:13:7: error: may not define methods on non-local type
func (b *bufio.Reader) Buffered() int { // ERROR "non-local|redefinition"
^
Change-Id: I4112ca8d91336f6369f780c1d45b8915b5e8e235
Reviewed-on: https://go-review.googlesource.com/c/130955
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Building with gccgo failed with an undefined symbol error from an
unnecessary hash function.
Updates #19773
Change-Id: Ic78bf1b086ff5ee26d464089c0e14987d3fe8b02
Reviewed-on: https://go-review.googlesource.com/c/130956
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Ensure that label redefinition error column numbers
print the actual start of the label instead of the
position of the label's delimiting token ":".
For example, given this program:
package main
func main() {
foo:
foo:
foo:
foo :
}
* Before:
main.go:5:13: label foo defined and not used
main.go:6:7: label foo already defined at main.go:5:13
main.go:7:4: label foo already defined at main.go:5:13
main.go:8:16: label foo already defined at main.go:5:13
* After:
main.go:5:13: label foo defined and not used
main.go:6:4: label foo already defined at main.go:5:13
main.go:7:1: label foo already defined at main.go:5:13
main.go:8:1: label foo already defined at main.go:5:13
Fixes#26411
Change-Id: I8eb874b97fdc8862547176d57ac2fa0f075f2367
Reviewed-on: https://go-review.googlesource.com/c/124595
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
In golang.org/cl/75310, the compiler's typechecker was changed so that
map key types were validated at a later stage, to make sure that all the
necessary type information was present.
This still worked for map type declarations, but caused a regression for
top-level map variable declarations. These now caused a fatal panic
instead of a typechecking error.
The cause was that checkMapKeys was run too early, before all
typechecking was done. In particular, top-level map variable
declarations are typechecked as external declarations, much later than
where checkMapKeys was run.
Add a test case for both exported and unexported top-level map
declarations, and add a second call to checkMapKeys at the actual end of
typechecking. Simply moving the one call isn't a good solution either;
the comments expand on that.
Fixes#28058.
Change-Id: Ia5febb01a1d877447cf66ba44fb49a7e0f4f18a5
Reviewed-on: https://go-review.googlesource.com/c/140417
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
When we pass these types by reference, we usually have to allocate
temporaries on the stack, initialize them, then pass their address
to the conversion functions. It's simpler to pass these types
directly by value.
This particularly applies to conversions needed for fmt.Printf
(to interface{} for constructing a [...]interface{}).
func f(a, b, c string) {
fmt.Printf("%s %s\n", a, b)
fmt.Printf("%s %s\n", b, c)
}
This function's stack frame shrinks from 200 to 136 bytes, and
its code shrinks from 535 to 453 bytes.
The go binary shrinks 0.3%.
Update #24286
Aside: for this function f, we don't really need to allocate
temporaries for the convT2E function. We could use the address
of a, b, and c directly. That might get similar (or maybe better?)
improvements. I investigated a bit, but it seemed complicated
to do it safely. This change was much easier.
Change-Id: I78cbe51b501fb41e1e324ce4203f0de56a1db82d
Reviewed-on: https://go-review.googlesource.com/c/135377
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This was missed as part of adding a top-level VARDEF
for stack tracing (CL 134156).
Fixes#28055
Change-Id: Id14748dfccb119197d788867d2ec6a3b3c9835cf
Reviewed-on: https://go-review.googlesource.com/c/140304
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
When a function triggers a signal (like a segfault which translates to
a nil pointer exception) during execution, a sigpanic handler is just
below it on the stack. The function itself did not stop at a
safepoint, so we have to figure out what safepoint we should use to
scan its stack frame.
Previously we used the site of the most recent defer to get the live
variables at the signal site. That answer is not quite correct, as
explained in #27518. Instead, use the site of a deferreturn call.
It has all the right variables marked as live (no args, all the return
values, except those that escape to the heap, in which case the
corresponding PAUTOHEAP variables will be live instead).
This CL requires stack objects, so that all the local variables
and args referenced by the deferred closures keep the right variables alive.
Fixes#27518
Change-Id: Id45d8a8666759986c203181090b962e2981e48ca
Reviewed-on: https://go-review.googlesource.com/c/134637
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The previous CL introduced stack objects. This CL removes the old
ambiguously live liveness analysis. After this CL we're relying
on stack objects exclusively.
Update a bunch of liveness tests to reflect the new world.
Fixes#22350
Change-Id: I739b26e015882231011ce6bc1a7f426049e59f31
Reviewed-on: https://go-review.googlesource.com/c/134156
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
In some optimization rules the type of generated OffPtr was
incorrectly set to the type of the pointee, instead of the
pointer. When the OffPtr value is spilled, this may generate
a spill of the wrong type, e.g. a floating point spill of an
integer (pointer) value. On Wasm, this leads to invalid
bytecode.
Fixes#27961.
Change-Id: I5d464847eb900ed90794105c0013a1a7330756cc
Reviewed-on: https://go-review.googlesource.com/c/139257
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Richard Musiol <neelance@gmail.com>
During a call to a reflect-generated function or method (via
makeFuncStub or methodValueCall), when should we scan the return
values?
When we're starting a reflect call, the space on the stack for the
return values is not initialized yet, as it contains whatever junk was
on the stack of the caller at the time. The return space must not be
scanned during a GC.
When we're finishing a reflect call, the return values are
initialized, and must be scanned during a GC to make sure that any
pointers in the return values are found and their referents retained.
When the GC stack walk comes across a reflect call in progress on the
stack, it needs to know whether to scan the results or not. It doesn't
know the progress of the reflect call, so it can't decide by
itself. The reflect package needs to tell it.
This CL adds another slot in the frame of makeFuncStub and
methodValueCall so we can put a boolean in there which tells the
runtime whether to scan the results or not.
This CL also adds the args length to reflectMethodValue so the
runtime can restrict its scanning to only the args section (not the
results) if the reflect package says the results aren't ready yet.
Do a delicate dance in the reflect package to set the "results are
valid" bit. We need to make sure we set the bit only after we've
copied the results back to the stack. But we must set the bit before
we drop reflect's copy of the results. Otherwise, we might have a
state where (temporarily) no one has a live copy of the results.
That's the state we were observing in issue #27695 before this CL.
The bitmap used by the runtime currently contains only the args.
(Actually, it contains all the bits, but the size is set so we use
only the args portion.) This is safe for early in a reflect call, but
unsafe late in a reflect call. The test issue27695.go demonstrates
this unsafety. We change the bitmap to always include both args
and results, and decide at runtime which portion to use.
issue27695.go only has a test for method calls. Function calls were ok
because there wasn't a safepoint between when reflect dropped its copy
of the return values and when the caller is resumed. This may change
when we introduce safepoints everywhere.
This truncate-to-only-the-args was part of CL 9888 (in 2015). That
part of the CL fixed the problem demonstrated in issue27695b.go but
introduced the problem demonstrated in issue27695.go.
TODO, in another CL: simplify FuncLayout and its test. stack return
value is now identical to frametype.ptrdata + frametype.gcdata.
Fixes#27695
Change-Id: I2d49b34e34a82c6328b34f02610587a291b25c5f
Reviewed-on: https://go-review.googlesource.com/137440
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Also includes a small tweak to test/run.go to allow package names
with Unicode letters (as opposed to just ASCII chars).
Updates #27836
Change-Id: Idbf0bdea24174808cddcb69974dab820eb13e521
Reviewed-on: https://go-review.googlesource.com/138075
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Show a more specifc error message in the form of "%d variables but %v
returns %d values" if an assignment mismatch occurs with a function
or method call on the right.
Fixes#27595
Change-Id: Ibc97d070662b08f150ac22d686059cf224e012ab
Reviewed-on: https://go-review.googlesource.com/135575
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Adds a new build tag "gcflags_noopt" that can be used in test/*.go
tests.
Fixes#27833
Change-Id: I4ea0ccd9e9e58c4639de18645fec81eb24a3a929
Reviewed-on: https://go-review.googlesource.com/136898
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
&^ and << have equal precedence. Add some parentheses to make sure
we shift before we andnot.
Fixes#27829
Change-Id: Iba8576201f0f7c52bf9795aaa75d15d8f9a76811
Reviewed-on: https://go-review.googlesource.com/136899
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
See the change and comment in typecheck.go for a detailed explanation.
Fixes#26855.
Change-Id: I7867f948490fc0873b1bd849048cda6acbc36e76
Reviewed-on: https://go-review.googlesource.com/136395
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
That optimization is not valid if x == -0.
The test is a bit tricky because 0 == -0. We distinguish
0 from -0 with 1/0 == inf, 1/-0 == -inf.
This has been a bug since CL 24790 in Go 1.8. Probably doesn't
warrant a backport.
Fixes#27718
Note: the optimization x-0 -> x is actually valid.
But it's probably best to take it out, so as to not confuse readers.
Change-Id: I99f16a93b45f7406ec8053c2dc759a13eba035fa
Reviewed-on: https://go-review.googlesource.com/135701
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Added some more cases that should be guarded against regression.
Change-Id: I9f1dda2fd0be9b6e167ef1cc018fc8cce55c066c
Reviewed-on: https://go-review.googlesource.com/134017
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Rationale: small buffer optimization does not work and it has
made things slower since 2014. Until we can make it work,
we should prefer simpler code that also turns out to be more
efficient.
With this change, it's possible to use
NewBuffer(make([]byte, 0, bootstrapSize)) to get the desired
stack-allocated initial buffer since escape analysis can
prove the created slice to be non-escaping.
New implementation key points:
- Zero value bytes.Buffer performs better than before
- You can have a truly stack-allocated buffer, and it's not even limited to 64 bytes
- The unsafe.Sizeof(bytes.Buffer{}) is reduced significantly
- Empty writes don't cause allocations
Buffer benchmarks from bytes package:
name old time/op new time/op delta
ReadString-8 9.20µs ± 1% 9.22µs ± 1% ~ (p=0.148 n=10+10)
WriteByte-8 28.1µs ± 0% 26.2µs ± 0% -6.78% (p=0.000 n=10+10)
WriteRune-8 64.9µs ± 0% 65.0µs ± 0% +0.16% (p=0.000 n=10+10)
BufferNotEmptyWriteRead-8 469µs ± 0% 461µs ± 0% -1.76% (p=0.000 n=9+10)
BufferFullSmallReads-8 108µs ± 0% 108µs ± 0% -0.21% (p=0.000 n=10+10)
name old speed new speed delta
ReadString-8 3.56GB/s ± 1% 3.55GB/s ± 1% ~ (p=0.165 n=10+10)
WriteByte-8 146MB/s ± 0% 156MB/s ± 0% +7.26% (p=0.000 n=9+10)
WriteRune-8 189MB/s ± 0% 189MB/s ± 0% -0.16% (p=0.000 n=10+10)
name old alloc/op new alloc/op delta
ReadString-8 32.8kB ± 0% 32.8kB ± 0% ~ (all equal)
WriteByte-8 0.00B 0.00B ~ (all equal)
WriteRune-8 0.00B 0.00B ~ (all equal)
BufferNotEmptyWriteRead-8 4.72kB ± 0% 4.67kB ± 0% -1.02% (p=0.000 n=10+10)
BufferFullSmallReads-8 3.44kB ± 0% 3.33kB ± 0% -3.26% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
ReadString-8 1.00 ± 0% 1.00 ± 0% ~ (all equal)
WriteByte-8 0.00 0.00 ~ (all equal)
WriteRune-8 0.00 0.00 ~ (all equal)
BufferNotEmptyWriteRead-8 3.00 ± 0% 3.00 ± 0% ~ (all equal)
BufferFullSmallReads-8 3.00 ± 0% 2.00 ± 0% -33.33% (p=0.000 n=10+10)
The most notable thing in go1 benchmarks is reduced allocs in HTTPClientServer (-1 alloc):
HTTPClientServer-8 64.0 ± 0% 63.0 ± 0% -1.56% (p=0.000 n=10+10)
For more explanations and benchmarks see the referenced issue.
Updates #7921
Change-Id: Ica0bf85e1b70fb4f5dc4f6a61045e2cf4ef72aa3
Reviewed-on: https://go-review.googlesource.com/133715
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
