This extends the GCSweepDone event with counts of swept and reclaimed
bytes. These are useful for understanding the duration and
effectiveness of sweep events.
Change-Id: I3c97a4f0f3aad3adbd188adb264859775f54e2df
Reviewed-on: https://go-review.googlesource.com/40811
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Currently, each individual span sweep emits a span to the trace. But
sweeps are generally done in loops until some condition is satisfied,
so this tracing is lower-level than anyone really wants any hides the
fact that no other work is being accomplished between adjacent sweep
events. This is also high overhead: enabling tracing significantly
impacts sweep latency.
Replace this with instead tracing around the sweep loops used for
allocation. This is slightly tricky because sweep loops don't
generally know if any sweeping will happen in them. Hence, we make the
tracing lazy by recording in the P that we would like to start tracing
the sweep *if* one happens, and then only closing the sweep event if
we started it.
This does mean we don't get tracing on every sweep path, which are
legion. However, we get much more informative tracing on the paths
that block allocation, which are the paths that matter.
Change-Id: I73e14fbb250acb0c9d92e3648bddaa5e7d7e271c
Reviewed-on: https://go-review.googlesource.com/40810
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Changes the text to match GOOS which appends 'and so on' at the
end to avoid restricting the set of possible values.
Change-Id: I54bcde71334202cf701662cdc2582c974ba8bf53
Reviewed-on: https://go-review.googlesource.com/41074
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Patch from Vlad Krasnov and confirmed to be under CLA.
Fixes#20040.
Change-Id: Ieb8436c4dcb6669a1620f1e0d257efd047b1b87c
Reviewed-on: https://go-review.googlesource.com/41070
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When allocating a non-small array of buckets for a map,
also preallocate some overflow buckets.
The estimate of the number of overflow buckets
is based on a simulation of putting mid=(low+high)/2 elements
into a map, where low is the minimum number of elements
needed to reach this value of b (according to overLoadFactor),
and high is the maximum number of elements possible
to put in this value of b (according to overLoadFactor).
This estimate is surprisingly reliable and accurate.
The number of overflow buckets needed is quadratic,
for a fixed value of b.
Using this mid estimate means that we will overallocate a few
too many overflow buckets when the actual number of elements is near low,
and underallocate significantly too few overflow buckets
when the actual number of elements is near high.
The mechanism introduced in this CL can be re-used for
other overflow bucket optimizations.
For example, given an initial size hint,
we could estimate quite precisely the number of overflow buckets.
This is #19931.
We could also change from "non-nil means end-of-list"
to "pointer-to-hmap.buckets means end-of-list",
and then create a linked list of reusable overflow buckets
when they are freed by map growth.
That is #19992.
We could also use a similar mechanism to do bulk allocation
of overflow buckets.
All these uses can co-exist with only the one additional pointer
in mapextra, given a little care.
name old time/op new time/op delta
MapPopulate/1-8 60.1ns ± 2% 60.3ns ± 2% ~ (p=0.278 n=19+20)
MapPopulate/10-8 577ns ± 1% 578ns ± 1% ~ (p=0.140 n=20+20)
MapPopulate/100-8 8.06µs ± 1% 8.19µs ± 1% +1.67% (p=0.000 n=20+20)
MapPopulate/1000-8 104µs ± 1% 104µs ± 1% ~ (p=0.317 n=20+20)
MapPopulate/10000-8 891µs ± 1% 888µs ± 1% ~ (p=0.101 n=19+20)
MapPopulate/100000-8 8.61ms ± 1% 8.58ms ± 0% -0.34% (p=0.009 n=20+17)
name old alloc/op new alloc/op delta
MapPopulate/1-8 0.00B 0.00B ~ (all equal)
MapPopulate/10-8 179B ± 0% 179B ± 0% ~ (all equal)
MapPopulate/100-8 3.33kB ± 0% 3.38kB ± 0% +1.48% (p=0.000 n=20+16)
MapPopulate/1000-8 55.5kB ± 0% 53.4kB ± 0% -3.84% (p=0.000 n=19+20)
MapPopulate/10000-8 432kB ± 0% 428kB ± 0% -1.06% (p=0.000 n=19+20)
MapPopulate/100000-8 3.65MB ± 0% 3.62MB ± 0% -0.70% (p=0.000 n=20+20)
name old allocs/op new allocs/op delta
MapPopulate/1-8 0.00 0.00 ~ (all equal)
MapPopulate/10-8 1.00 ± 0% 1.00 ± 0% ~ (all equal)
MapPopulate/100-8 18.0 ± 0% 17.0 ± 0% -5.56% (p=0.000 n=20+20)
MapPopulate/1000-8 96.0 ± 0% 72.6 ± 1% -24.38% (p=0.000 n=20+20)
MapPopulate/10000-8 625 ± 0% 319 ± 0% -48.86% (p=0.000 n=20+20)
MapPopulate/100000-8 6.23k ± 0% 4.00k ± 0% -35.79% (p=0.000 n=20+20)
Change-Id: I01f41cb1374bdb99ccedbc00d04fb9ae43daa204
Reviewed-on: https://go-review.googlesource.com/40979
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Any change to how we allocate overflow buckets
will require some extra hmap storage,
but we don't want hmap to grow,
particular as small maps usually don't need overflow buckets.
This CL converts the existing hmap overflow field,
which is usually used for pointer-free maps,
into a generic extra field.
This extra field can be used to hold data that is optional.
If it is valuable enough to do have special
handling of overflow buckets, which are medium-sized,
it is valuable enough to pay an extra alloc and two extra words for.
Adding fields to extra would entail adding overhead to pointer-free maps;
any mapextra fields added would need to be weighed against that.
This CL is just rearrangement, though.
Updates #19931
Updates #19992
Change-Id: If8537a206905b9d4dc6cd9d886184ece671b3f80
Reviewed-on: https://go-review.googlesource.com/40976
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This simplifies the code, as well as providing
a single place to modify to change the
allocation of new overflow buckets.
Updates #19931
Updates #19992
Change-Id: I77070619f5c8fe449bbc35278278bca5eda780f2
Reviewed-on: https://go-review.googlesource.com/40975
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
goobj.importPathToPrefix is 3x faster than gc.pathToPrefix so rename and
move it to cmd/internal/objabi which is already imported by both goobj and
gc.
Change-Id: I10eda5bce95ef6d5d888818c5c47258c2833ea45
Reviewed-on: https://go-review.googlesource.com/40875
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The last use of condOps was removed in c644a76.
Change-Id: I5383d0e7a9078fc17ca12ed032ecf8e7f4aa95d7
Reviewed-on: https://go-review.googlesource.com/41030
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Replace derecursed postorder computation with one that
mimics DFS traversal.
Corrected outerinner function in loopfinder
Leave enhanced checks in place.
Change-Id: I657ba5e89c88941028d6d4c72e9f9056e30f1ce8
Reviewed-on: https://go-review.googlesource.com/40872
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Follow-up on https://go-review.googlesource.com/#/c/39998/
which dropped this information.
The reported blocks are the innermost blocks containing a
label jumped to from outside, not the outermost block as
reported originally by cmd/compile.
We could report the outermost block with a slighly more
involved algorithm (need to track containing blocks for
all unresolved forward gotos), but since gccgo also reports
the innermost blocks, the current approach seems good enough.
Change-Id: Ic0235b8fafe8d5f99dc9872b58e90e8d9e72c5db
Reviewed-on: https://go-review.googlesource.com/40980
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Marvin Stenger <marvin.stenger94@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
zbootstrap.go was moved in 1e3570a. This updates .gitignore to match.
Change-Id: I7500e0abc8e60b6c36c6ae056b2f68b9d021fc6f
Reviewed-on: https://go-review.googlesource.com/40993
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Instead of a separate check control flow pass (checkcfg.go)
operating on nodes, perform this check at parse time on the
new syntax tree. Permits this check to be done concurrently,
and doesn't depend on the specifics of the symbol's dclstack
implementation anymore. The remaining dclstack uses will be
removed in a follow-up change.
- added CheckBranches Mode flag (so we can turn off the check
if we only care about syntactic correctness, e.g. for tests)
- adjusted test/goto.go error messages: the new branches
checker only reports if a goto jumps into a block, but not
which block (we may want to improve this again, eventually)
- also, the new branches checker reports one variable that
is being jumped over by a goto, but it may not be the first
one declared (this is fine either way)
- the new branches checker reports additional errors for
fixedbugs/issue14006.go (not crucial to avoid those errors)
- the new branches checker now correctly reports only
variable declarations being jumped over, rather than
all declarations (issue 8042). Added respective tests.
Fixes#8042.
Change-Id: I53b6e1bda189748e1e1fb5b765a8a64337c27d40
Reviewed-on: https://go-review.googlesource.com/39998
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Now only cmd/asm and cmd/compile depend on cmd/internal/obj. Changing
the assembler backends no longer requires reinstalling cmd/link or
cmd/addr2line.
There's also now one canonical definition of the object file format in
cmd/internal/objabi/doc.go, with a warning to update all three
implementations.
objabi is still something of a grab bag of unrelated code (e.g., flag
and environment variable handling probably belong in a separate "tool"
package), but this is still progress.
Fixes#15165.
Fixes#20026.
Change-Id: Ic4b92fac7d0d35438e0d20c9579aad4085c5534c
Reviewed-on: https://go-review.googlesource.com/40972
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Now cgo reads source files twice: for c prefix generation and parsing
go code to an ast node. It can be narrowed down to single loop.
Change-Id: Ie05452a3a12106aaab863244727390037e69e8e6
Reviewed-on: https://go-review.googlesource.com/40939
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Someday we should write errchk in Go. But not today.
Fixes#20007
Change-Id: I61ccf3cfaa66a710782f8a2212a6a2b4040698da
Reviewed-on: https://go-review.googlesource.com/40950
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Here we restrict using cgo builtin references because internally they're go functions
as opposed to C usafe.Pointer values.
Fixes#18889
Change-Id: I1e4332e4884063ccbaf9772c172d4462ec8f3d13
Reviewed-on: https://go-review.googlesource.com/40934
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
TestMultiReaderFlatten determines the call depth by counting PCs
returned by runtime.Callers. With inlining, this is incorrect because
a PC can represent multiple calls. Furthermore, runtime.Callers might
return an additional "skip" PC, which does not represent a real call.
This modifies the test to use CallersFrames to determine the call depth.
Now the test passes with -l=4.
Change-Id: I284f3b1e0b2d194bd08c230c616914503e5a370d
Reviewed-on: https://go-review.googlesource.com/40990
Run-TryBot: David Lazar <lazard@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Only the noinline pragma on testCallerFoo is needed to pass the test,
but the second pragma makes the test robust to future changes to the
inliner.
Change-Id: I80b384380c598f52e0382f53b59bb47ff196363d
Reviewed-on: https://go-review.googlesource.com/40877
Run-TryBot: David Lazar <lazard@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Otherwise, with -l=4, runtime.Callers gets inlined and the example
prints too many frames. Now the example passes with -l=4.
Change-Id: I9e420af9371724ac3ec89efafd76a658cf82bb4a
Reviewed-on: https://go-review.googlesource.com/40876
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This rewrites runtime.Caller in terms of stackExpander, which already
handles inlined frames and partially skipped frames. This also has the
effect of making runtime.Caller understand cgo frames if there is a cgo
symbolizer.
Updates #19348.
Change-Id: Icdf4df921aab5aa394d4d92e3becc4dd169c9a6e
Reviewed-on: https://go-review.googlesource.com/40270
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
CL 27254 changed hextable to a byte array for performance.
CL 28219 fixed the compiler so that that is no longer necessary.
As Kirill notes in #15808, a string is preferable
as the linker can easily de-dup it.
So go back. No performance changes.
Change-Id: Ibef7d21d0f2507968a0606602c5dd57ed4a85b1b
Reviewed-on: https://go-review.googlesource.com/40970
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Automated refactoring using github.com/mdempsky/unbed (to rewrite
s.Foo to s.FuncInfo.Foo) and then gorename (to rename the FuncInfo
field to just Func).
Passes toolstash-check -all.
Change-Id: I802c07a1239e0efea058a91a87c5efe12170083a
Reviewed-on: https://go-review.googlesource.com/40670
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This CL adds a simple explanation about what means the ptrdata field of
the reflect.rtype type.
Also document that rtype needs to be kept in sync with the runtime._type
type that rtype mirrors.
Change-Id: Icd9663a2e4bb94d922a2417cfe4537861d2ccc97
Reviewed-on: https://go-review.googlesource.com/40917
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If the bool value isn't used, there is no need to assign to underscore -
there is a shorter form that only returns the value and behaves in the
exact same way.
Change-Id: Iaf801b8e966da6c2f565bc39e3bb028175c92d60
Reviewed-on: https://go-review.googlesource.com/40920
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change just picks a few constants from DragonfFly BSD 4.6 kernel
and doesn't synchronize all the existing constants with the latest
DragonFly BSD kernels.
Updates #14222.
Change-Id: Ie107a8bee1a09393b3b42b6f82489532f5d13290
Reviewed-on: https://go-review.googlesource.com/40894
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
A prior CL eliminated the last reference to Ctxt.Hash
from the compiler.
Change-Id: Ic97ff84ed1a14e0c93fb0e8ec0b2617c3397c0e8
Reviewed-on: https://go-review.googlesource.com/40699
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It was a bit weird to have it at the top of pgen.go.
This does half of the TODO at the top of the comment.
Change-Id: I65140fa05673b2dbb6feddb8c1877f6d624a7844
Reviewed-on: https://go-review.googlesource.com/40698
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The compiler handled gcargs and gclocals LSyms unusually.
It generated placeholder symbols (makefuncdatasym),
filled them in, and then renamed them for content-addressability.
This is an important binary size optimization;
the same locals information occurs over and over.
This CL continues to treat these LSyms unusually,
but in a slightly more explicit way,
and importantly for concurrent compilation,
in a way that does not require concurrent
modification of Ctxt.Hash.
Instead of creating gcargs and gclocals in the usual way,
by creating a types.Sym and then an obj.LSym,
we add them directly to obj.FuncInfo,
initialize them in obj.InitTextSym,
and deduplicate and add them to ctxt.Data at the end.
Then the backend's job is simply to fill them in
and rename them appropriately.
Updates #15756
name old alloc/op new alloc/op delta
Template 38.8MB ± 0% 38.7MB ± 0% -0.22% (p=0.016 n=5+5)
Unicode 29.8MB ± 0% 29.8MB ± 0% ~ (p=0.690 n=5+5)
GoTypes 113MB ± 0% 113MB ± 0% -0.24% (p=0.008 n=5+5)
SSA 1.25GB ± 0% 1.24GB ± 0% -0.39% (p=0.008 n=5+5)
Flate 25.3MB ± 0% 25.2MB ± 0% -0.43% (p=0.008 n=5+5)
GoParser 31.7MB ± 0% 31.7MB ± 0% -0.22% (p=0.008 n=5+5)
Reflect 78.2MB ± 0% 77.6MB ± 0% -0.80% (p=0.008 n=5+5)
Tar 26.6MB ± 0% 26.3MB ± 0% -0.85% (p=0.008 n=5+5)
XML 42.4MB ± 0% 41.9MB ± 0% -1.04% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
Template 378k ± 0% 377k ± 1% ~ (p=0.151 n=5+5)
Unicode 321k ± 1% 321k ± 0% ~ (p=0.841 n=5+5)
GoTypes 1.14M ± 0% 1.14M ± 0% -0.47% (p=0.016 n=5+5)
SSA 9.71M ± 0% 9.67M ± 0% -0.33% (p=0.008 n=5+5)
Flate 233k ± 1% 232k ± 1% ~ (p=0.151 n=5+5)
GoParser 316k ± 0% 315k ± 0% -0.49% (p=0.016 n=5+5)
Reflect 979k ± 0% 972k ± 0% -0.75% (p=0.008 n=5+5)
Tar 250k ± 0% 247k ± 1% -0.92% (p=0.008 n=5+5)
XML 392k ± 1% 389k ± 0% -0.67% (p=0.008 n=5+5)
Change-Id: Idc36186ca9d2f8214b5f7720bbc27b6bb22fdc48
Reviewed-on: https://go-review.googlesource.com/40697
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The Frames API forces the PC slice to escape to the heap because it
stores it in the Frames object. However, we'd like to use this API for
call stack expansion internally in the runtime in places where it
would be very good to avoid heap allocation.
This commit makes this possible by pulling the bulk of the Frames
implementation into an internal frameExpander API. The key difference
between these APIs is that the frameExpander does not hold the PC
slice; instead, the caller is responsible for threading the PC slice
through the frameExpander API calls. This makes it possible to keep
the PC slice on the stack. The Frames API then becomes a thin shim
around the frameExpander that keeps the PC slice in the Frames object.
Change-Id: If6b2d0b9132a2a905a0cf5deced9feddce76fc0e
Reviewed-on: https://go-review.googlesource.com/40610
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Lazar <lazard@golang.org>
Reading a response with a status line like "HTTP/1.0 401 Unauthorized"
(with two spaces after the version) has been returning an error. Now the
extra space will be ignored.
Fixes#19989
Change-Id: I0c88a6ef7562ba80e2e2635be2070dd1b5b671a7
Reviewed-on: https://go-review.googlesource.com/40933
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously the "ABI hash" for a package (used to determine if a loaded shared
library has the ABI expected by its loader) was the hash of the entire
__.PKGDEF file. But that means it depends on the build ID generated by the go
tool for the package, which means that if a file is added (even a .c or .h
file!) to the package, the ABI changes, perhaps uncessarily.
Fixes#19920
Change-Id: If919481e1a03afb350c8a9c7a0666bb90ee90270
Reviewed-on: https://go-review.googlesource.com/40401
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Added a paragraph and examples explaining when an implementation
may use fused floating-point operations (such as FMA) and how to
prevent operation fusion.
For #17895.
Change-Id: I64c9559fc1097e597525caca420cfa7032d67014
Reviewed-on: https://go-review.googlesource.com/40391
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
While debugging a recent regression it was discovered that
the assembler for ppc64x was not always generating the correct
instruction for DS form loads and stores. When an instruction
is DS form then the offset must be a multiple of 4, and if it
isn't then bits outside the offset field were being incorrectly
set resulting in unexpected and incorrect instructions.
This change adds a check to determine when the opcode is DS form
and then verifies that the offset is a multiple of 4 before
generating the instruction, otherwise logs an error.
This also changes a few asm files that were using unaligned offsets
for DS form loads and stores. In the runtime package these were
instructions intended to cause a crash so using aligned or unaligned
offsets doesn't change that behavior.
Change-Id: Ie3a7e1e65dcc9933b54de7a46a054da8459cb56f
Reviewed-on: https://go-review.googlesource.com/40476
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Avoid the use of constant absolute temp files in tests. This could
produce flaky results, for example on multiuser development machines.
Change-Id: Ia76157a0660fbe294bb31a46ded886cea5deec97
Reviewed-on: https://go-review.googlesource.com/40916
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some tests need the src/runtime/textflag.h file. Make sure it is
included in iOS test runs.
Change-Id: I5e0e7ebe85679686ef15a7d336f28ac9b68a587a
Reviewed-on: https://go-review.googlesource.com/40915
Run-TryBot: Elias Naur <elias.naur@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The first part of this test tries to confirm that we can't create
a TempFile in a non-existent directory, but does not ensure that
the non-existent directory really does not exist. Instead, let's
create an empty temp directory, and use a non-existent subdir of
that.
Change-Id: I176f14ed5f5a2d7a8c29d8f6949755db69d7dbb6
Reviewed-on: https://go-review.googlesource.com/40914
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
