Just a first basic test, I'll extend this to test more but want to get an
opinion on basic approach first.
Change-Id: Idab9ebd7d9960b000b81a01a1e53258bf4bce755
Reviewed-on: https://go-review.googlesource.com/9386
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
This doesn't test much with gccgo, but at least it builds now, and the
test does, unsurprisingly, pass. A proper test would require adding
assembly files in GCC syntax for all platforms that gccgo supports,
which would be infeasible.
Also added copyright headers to the asm files.
Change-Id: Icea5af29d7d521a0681506ddb617a79705b76d33
Reviewed-on: https://go-review.googlesource.com/9417
Reviewed-by: Minux Ma <minux@golang.org>
Instead of comparing against the entire output that may include
verbose warning messages, use the last line of the output and check
it includes the expected success message (PASS).
Change-Id: Iafd583ee5529a8aef5439b9f1f6ce0185e4b1331
Reviewed-on: https://go-review.googlesource.com/9304
Reviewed-by: David Crawshaw <crawshaw@golang.org>
- main3.c tests main.main is exported when compiled for GOOS=android.
- wait longer for main2.c (it's slow on android/arm)
- rearranged test.bash
Fixes#10070.
Change-Id: I6e5a98d1c5fae776afa54ecb5da633b59b269316
Reviewed-on: https://go-review.googlesource.com/9296
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
Forward signals to signal handlers installed before Go installs its own,
under certain circumstances. In particular, as iant@ suggests, signals are
forwarded iff:
(1) a non-SIG_DFL signal handler existed before Go, and
(2) signal is synchronous (i.e., one of SIGSEGV, SIGBUS, SIGFPE), and
(3a) signal occured on a non-Go thread, or
(3b) signal occurred on a Go thread but in CGo code.
Supported only on Linux, for now.
Change-Id: I403219ee47b26cf65da819fb86cf1ec04d3e25f5
Reviewed-on: https://go-review.googlesource.com/8712
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The purpose of this test is to make sure that -buildmode=c-shared
works even when the shared library can be built without invoking cgo.
Change-Id: Id6f95af755992b209aff770440ca9819b74113ab
Reviewed-on: https://go-review.googlesource.com/9166
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Change-Id: I0d3f9841500e0a41f1c427244869bf3736a31e18
Reviewed-on: https://go-review.googlesource.com/9075
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Followed the same test pattern in misc/cgo/testcarchive.
Change-Id: I2f863b5c24a28f0b38b0128ed3e8a92c17fb5b9f
Reviewed-on: https://go-review.googlesource.com/8985
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This memory is untyped and can't be used anymore.
The next version of SWIG won't need it.
Change-Id: I592b287c5f5186975ee09a9b28d8efe3b57134e7
Reviewed-on: https://go-review.googlesource.com/8956
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is a follow-up to CL 8910.
This is the version that I have tested and which works
when appID and teamID are not the same (which they appear
to be for the builder).
I am unsure how I submitted it with the wrong code.
Change-Id: I186e34e91953d082b507390c1cd2042e5419c4c9
Reviewed-on: https://go-review.googlesource.com/8943
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Because there is no libgcc.
Change-Id: I3b3f80791a1db4c2b7318f81a115972cd2237f07
Signed-off-by: Shenghou Ma <minux@golang.org>
Reviewed-on: https://go-review.googlesource.com/8786
Reviewed-by: David Crawshaw <crawshaw@golang.org>
We no longer need the EXC_BAD_ACCESS watcher as runtime/cgo contains
a mach exception handler that catches it. And now lldb only
intermittently reports process connection and exiting, so instead
just look for the PASS from Go.
Change-Id: I403266558f5a900e0b87ec1019d9baec88148d23
Reviewed-on: https://go-review.googlesource.com/8957
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Use environment variables to allow set-and-forget.
Add a script to attempt to autodetect codesign info.
Change-Id: Ic56b9c5f097b1a4117ebb89c408bc333d91f581d
Reviewed-on: https://go-review.googlesource.com/8910
Reviewed-by: David Crawshaw <crawshaw@golang.org>
With the new buildmodes c-archive and c-shared, it is possible for a
cgo call to come in early in the lifecycle of a Go program. Calls
before the runtime has been initialized are caught by
_cgo_wait_runtime_init_done. However a call can come in after the
runtime has initialized, but before the program's package init
functions have finished running.
To avoid this cgocallback checks m.ncgo to see if we are on a thread
running Go. If not, we may be a foreign thread and it blocks until
main_init is complete.
Change-Id: I7a9f137fa2a40c322a0b93764261f9aa17fcf5b8
Reviewed-on: https://go-review.googlesource.com/8897
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
The -lldb flag makes it easy to use go run and end up in a debugging
session on darwin/arm.
Change-Id: I556f93e950086a7dff4839f301b9c55f7579f87b
Reviewed-on: https://go-review.googlesource.com/8024
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
This reverts commit 9fa9f966e9.
The change has broken darwin and netbsd builders. It needs to be tested properly.
Change-Id: Id9e2d30caa8764c362c9f33890015dfc1aae0dab
Reviewed-on: https://go-review.googlesource.com/8527
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
After moving the darwin/arm builder to new hardware several new flaky
error messages appeared. This provided enough information to Google
to make it clear that iOS build systems have been flaky for many
years, and that is unlikely to change any time soon.
However, all of the pain of lldb and using a breakpoint early in
program initialization gives us an advantage: all install and
initialization flakiness appears to happen before the Go program ever
gets going. So if we see an error or we timeout before we reach our
breakpoint (before any test code has executed), we can assume it is
the fault of the builder and restart without risking hiding a flaky
Go test.
This code has successfully processed the last 8 builds. I am hopeful.
Change-Id: Ide24aaae4fa7bdab9d8f4432bb85d8f2256c7606
Reviewed-on: https://go-review.googlesource.com/8241
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
The clever partial timer I added interacts badly with iOS app launch
timeout termination. A fixed timeout will be easier to debug.
Change-Id: I6eb4ee5f1431539f00fa707e8cde6f3cf86983fc
Reviewed-on: https://go-review.googlesource.com/8083
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Split out from cl/8024 for clarity and improved approach.
Rarely, "stop reason = breakpoint" does not appear in the lldb stop
text. However the program is ready to proceed. To be a little more
robust about those cases, we wait for two seconds, and if that text
doesn't appear but a prompt does we continue and hope for the best.
Worst case, this results in a harder to read failure message.
Change-Id: Ib20aa92564cdccefd2b7260417c647cd44122b66
Reviewed-on: https://go-review.googlesource.com/8080
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
The SecureRandom named service was removed in
https://codereview.chromium.org/550523002. And the new syscall
was introduced in https://codereview.chromium.org/537543003.
Accepting this will remove the support for older version of
sel_ldr. I've confirmed that both pepper_40 and current
pepper_canary have this syscall.
After this change, we need sel_ldr from pepper_39 or above to
work.
Fixes#9261
Change-Id: I096973593aa302ade61f259a3a71ebc7c1a57913
Signed-off-by: Shenghou Ma <minux@golang.org>
Reviewed-on: https://go-review.googlesource.com/1755
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
The test used to import ../callback. I forget why that ever worked,
but it probably had something to do with the shared libraries we used
to use with SWIG. It doesn't work today.
Change-Id: Ib83d6c398aa46bf2fc66320b47b6e6d9897ee0b7
Reviewed-on: https://go-review.googlesource.com/7004
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This will enable test sharding over multiple VMs, to speed trybot answers.
Update #10029
Change-Id: Ie277c6459bc38005e4d6af14d22effeaa0a4667e
Reviewed-on: https://go-review.googlesource.com/6531
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
We now wait until we see the completed prompt from a command before
proceeding. This seems to cut down on a spurious error I have seen
this afternoon.
Change-Id: Ic0a3481d8c265c3c3b4449ec7ac1c2752b85b0b6
Reviewed-on: https://go-review.googlesource.com/6691
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
See golang.org/cl/6511.
Change-Id: I2145a42877ed6b78400f29c2ef18969870dab5c3
Reviewed-on: https://go-review.googlesource.com/6512
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
This script is getting very close to complete, and is complex enough
that I'd like to get what's there so far reviewed. With it the builder
is left failing on eight packages. Two of those involve correcting
GOROOT which may need modifications to this script, the others are
either a unix sockets bug I have to hunt down or are caused by lldb
getting stuck on SIGSEGV, a TODO.
Change-Id: I5ff933800167b6764b51ad195da7dcda61d59ff8
Reviewed-on: https://go-review.googlesource.com/6404
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Trace command allows to visualize and analyze traces.
Run as:
$ go tool trace binary trace.file
The commands opens web browser with the main page,
which contains links for trace visualization,
blocking profiler, network IO profiler and per-goroutine
traces.
Also move trace parser from runtime/pprof/trace_parser_test.go
to internal/trace/parser.go, so that it can be shared between
tests and the command.
Change-Id: Ic97ed59ad6e4c7e1dc9eca5e979701a2b4aed7cf
Reviewed-on: https://go-review.googlesource.com/3601
Reviewed-by: Andrew Gerrand <adg@golang.org>
Only documentation / comment changes. Update references to
point to golang.org permalinks or go.googlesource.com/go.
References in historical release notes under doc are left as is.
Change-Id: Icfc14e4998723e2c2d48f9877a91c5abef6794ea
Reviewed-on: https://go-review.googlesource.com/4060
Reviewed-by: Ian Lance Taylor <iant@golang.org>
On Darwin/ARM, because libSystem doesn't provide functions for
__sync_fetch_and_add, and only clang can inline that function,
skip the test when building with GCC.
Change-Id: Id5e9d8f9bbe1e6bcb2f381f0f66cf68aa95277c7
Reviewed-on: https://go-review.googlesource.com/2125
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This dashboard is no longer in use, and doesn't work with Gerrit.
Change-Id: Ib7c367dcad97322566610157b15e23db5bec58ff
Reviewed-on: https://go-review.googlesource.com/3028
Reviewed-by: David Symonds <dsymonds@golang.org>
This change includes the cleanup of temporary files created during
the binary execution as well.
Change-Id: Ic01a0a537d1daafcaa3acda1ec344aff5dcddfc2
Reviewed-on: https://go-review.googlesource.com/2903
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This test requires external linking, but we don't yet implement
external linking on ppc64 (tracked in issue #8912). Disable the test
on ppc64 until external linking is implemented.
This makes all.bash pass on ppc64le.
Change-Id: I741498d4d9321607e7a65792a33faf8187bd18e4
Reviewed-on: https://go-review.googlesource.com/2908
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Git marks some of its files read only, so os.RemoveAll isn't sufficient
to remove them from the ".git" directory.
Change-Id: I3150596931d1c77e7cf9fb8da1a999d2c6730121
Reviewed-on: https://go-review.googlesource.com/2930
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
