If a cycle has length 1, don't enumerate the single cycle entry;
instead just mention "refers to itself". For instance, for an
invalid recursive type T we now report:
invalid recursive type: T refers to itself
instead of:
invalid recursive type T
T refers to
T
Adjust tests to check for the different error messages.
Change-Id: I5bd46f62fac0cf167f0d0c9a55f952981d294ff4
Reviewed-on: https://go-review.googlesource.com/c/go/+/436295
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Robert Griesemer <gri@google.com>
Add hooks/apis to support writing of coverage counter data and
meta-data under user control (from within an executing "-cover"
binary), so as to provide a way to obtain coverage data from programs
that do not terminate. This patch also adds a hook for clearing the
coverage counter data for a running program, something that can be
helpful when the intent is to capture coverage info from a specific
window of program execution.
Updates #51430.
Change-Id: I34ee6cee52e5597fa3698b8b04f1b34a2a2a418f
Reviewed-on: https://go-review.googlesource.com/c/go/+/401236
Reviewed-by: David Chase <drchase@google.com>
Some of the unit tests in Go's "cmd" tree wind up building a separate
copy of the tool being tested, then exercise the freshly built tool as
a way of doing regression tests. The intent is to make sure that "go
test" is testing the current state of the source code, as opposed to
whatever happened to be current when "go install <tool>" was last run.
Doing things this way is unfriendly for coverage testing. If I run "go
test -cover cmd/mumble", and the cmd/mumble test harness builds a
fresh copy of mumble.exe, any runs of that new executable won't
generate coverage data.
This patch updates the test harnesses to use the unit test executable
as a stand-in for the tool itself, so that if "go test -cover" is in
effect, we get the effect of building the tool executable for coverage
as well. Doing this brings up the overall test coverage number for
cmd/cover quite dramatically:
before change:
$ go test -cover .
ok cmd/cover 1.100s coverage: 1.5% of statements
after change:
$ go test -cover .
ok cmd/cover 1.299s coverage: 84.2% of statements
Getting this to work requires a small change in the Go command as
well, to set GOCOVERDIR prior to executing a test binary.
Updates #51430.
Change-Id: Ifcf0ea85773b80fcda794aae3702403ec8e0b733
Reviewed-on: https://go-review.googlesource.com/c/go/+/404299
Reviewed-by: Bryan Mills <bcmills@google.com>
Add a testpoint to cover support routines used to help
implement "go test -cover".
Change-Id: Ic28bf884a4e0d2c0a6d8fd04fc29c0c949227f21
Reviewed-on: https://go-review.googlesource.com/c/go/+/432315
Reviewed-by: Bryan Mills <bcmills@google.com>
Change-Id: I022a221e2d73cd8c70e8e04b7046c388748646a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/435696
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Change-Id: Ic977026a99a825954117902051e59928de9ccbdb
Reviewed-on: https://go-review.googlesource.com/c/go/+/435947
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Run-TryBot: xie cui <523516579@qq.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Change-Id: I97b5592c678c350fd77069d7c40a98864733707a
Reviewed-on: https://go-review.googlesource.com/c/go/+/435946
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Change-Id: I6007cc6363e22ffa5f9a8f0441a642fd85127397
Reviewed-on: https://go-review.googlesource.com/c/go/+/435945
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Change-Id: Iaa623dae50ccae36ad44af25899c6453b6108046
Reviewed-on: https://go-review.googlesource.com/c/go/+/435944
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Change-Id: If08ce3f8534f5fb7ce97ec124bfeff937e65f63b
Reviewed-on: https://go-review.googlesource.com/c/go/+/435943
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Change-Id: I62f38aa07e9c6e2f0947d23adc7a1b453277c790
Reviewed-on: https://go-review.googlesource.com/c/go/+/435942
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Change-Id: Ieb8fb7c623ecd8b9ddd15cdb6eb2c6326a9bbd3b
Reviewed-on: https://go-review.googlesource.com/c/go/+/435941
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Change-Id: Idbade74025bddb26ec3c10527de5af5dc2b8c1cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/435940
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Use a separate channel to report the final error of the copying
goroutines, receiving a value only when all of the copying goroutines
have completed. In a followup change (CL 401835), that will allow
waiters to select on goroutine completion alongside other events (such
as Context cancellation).
Also mildly refactor the watchCtx helper method so that its structure
better matches what will be needed to implement WaitDelay.
For #50436.
Change-Id: I54b3997fb6931d204814d8382f0a388a67b520f1
Reviewed-on: https://go-review.googlesource.com/c/go/+/435995
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
This fixes a bug introduced in CL 401834 in which calling Start twice
with pipes attached to a command would spuriously close those pipes
when returning the error from the second Start call.
For #50436.
Change-Id: I3563cc99c0a0987752190fef95da3e9927a76fda
Reviewed-on: https://go-review.googlesource.com/c/go/+/436095
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Bryan Mills <bcmills@google.com>
Auto-Submit: Bryan Mills <bcmills@google.com>
Add a slightly expanded version of the Decoder type comment to the top
level package doc, which explains that this package is not designed
to be hardened against adversarial inputs.
Change-Id: I8b83433838c8235eb06ded99041fdf726c811ee5
Reviewed-on: https://go-review.googlesource.com/c/go/+/436096
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Roland Shoemaker <roland@golang.org>
Auto-Submit: Roland Shoemaker <roland@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
There were many more uses of the variable name "cause" than "reason"
to hold error message details. Consistently use "cause" throughout.
Accordingly, s/MissingMethodReason/MissingMethodCause/.
Change-Id: I171d784faabc66a4c58ba8944784204687595203
Reviewed-on: https://go-review.googlesource.com/c/go/+/435418
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
This matches what go/types and types2 report and it also matches
the compiler errors reported for some related shift problems.
For #55326.
Change-Id: Iee40e8d988d5a7f9ff2c49f019884d02485c9fdf
Reviewed-on: https://go-review.googlesource.com/c/go/+/436177
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This is close to what the compiler used to say, except now we say
"as T value" rather than "as type T" which is closer to the truth
(we cannot use a value as a type, after all). Also, place the primary
error and the explanation (cause) on a single line.
Make respective (single line) adjustment to the matching "cannot
convert" error.
Adjust various tests.
For #55326.
Change-Id: Ib646cf906b11f4129b7ed0c38cf16471f9266b88
Reviewed-on: https://go-review.googlesource.com/c/go/+/436176
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This matches current compiler behavior.
For #55326.
Change-Id: I7197cf4ce21e614291a1a2e1048dd78d0a232b64
Reviewed-on: https://go-review.googlesource.com/c/go/+/436175
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
This change causes the parser to record the positions of the first
and last character in the file in new ast.File fields FileStart
and FileEnd.
The behavior of the existing Pos() and End() methods,
which record the span of declarations, must remain unchanged
for compatibility.
Fixesgolang/go#53202
Change-Id: I250b19e69f41e3590292c3fe6dea1943ec98f629
Reviewed-on: https://go-review.googlesource.com/c/go/+/427955
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Alan Donovan <adonovan@google.com>
Auto-Submit: Alan Donovan <adonovan@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Most tests will be skipped anyway because 'go build' is not available,
but this ensures cmd will be build tested by TryBots for js/wasm.
For #25911
For #35220
For #54219
Change-Id: I09c75905c36311810eb1ae75eeee2fa6102c1c0d
Reviewed-on: https://go-review.googlesource.com/c/go/+/435237
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The existing implementation can call to T.Setenv in T.Run even after
calling to T.Parallel, so I changed it to cause a panic in that case.
Fixes#55128
Change-Id: Ib89d998ff56f00f96a5ca218af071bd35fdae53a
Reviewed-on: https://go-review.googlesource.com/c/go/+/431101
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Bryan Mills <bcmills@google.com>
These relocations are produced by clang/llvm.
Change-Id: I4820e7ed805d1b7341023b263c167a285ca32cf5
Reviewed-on: https://go-review.googlesource.com/c/go/+/431755
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Run-TryBot: Joel Sing <joel@sing.id.au>
TryBot-Result: Gopher Robot <gobot@golang.org>
This CL removes some opcode placeholders that do not correspond
to any existing instructions and hence create confusion. Some
instructions that are no longer valid like LDMX are also removed.
Any references to this instruction in ISA 3.0 are considered
as documentation errata.
Change-Id: Ib71a657099723bbe1db88873233ee573b5c42fe7
Reviewed-on: https://go-review.googlesource.com/c/go/+/429860
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Paul Murphy <murp@ibm.com>
Run-TryBot: Archana Ravindar <aravind5@in.ibm.com>
Reviewed-by: Benny Siegert <bsiegert@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Reviewed-by: Archana Ravindar <aravind5@in.ibm.com>
In CL 429035 Keith suggested removing some
rules that were covered by generic rules. This
follows up on that comment.
Change-Id: I57b6c9ae0cd85f33a0eb2fef8356575d3d7820fb
Reviewed-on: https://go-review.googlesource.com/c/go/+/430417
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
If GOEXPERIMENT=coverageredesign is in effect, introduce a new
top-level '-cover' option to "go build" to turn on new-style hybrid
code coverage instrumentation. Similarly, use the new instrumentation
for "go test -cover".
The main effects of "-cover" under the hood are to instrument files at
the package level using cmd/cover and to pass additional options to
the compiler when building instrumented packages.
The previous workflow for "go tool -cover mypkg" would expand to a
series of "go tool cover" commands (one per file) followed by a single
package compilation command to build the rewritten sources.
With the new workflow, the Go command will pass all of the Go files in
a package to the cover tool as a chunk (along with a config file
containing other parameters), then the cover tool will write
instrumented versions of the sources along with another "output"
config with info on coverage variable names for the the compiler. The
Go command will then kick off the compiler on the modified source
files, also passing in the config file generated by cmd/cover.
Updates #51430.
Change-Id: Id65621ff6a8c70a30168c1412c2d6f805ff3b9e7
Reviewed-on: https://go-review.googlesource.com/c/go/+/355452
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Refactor references to "a.Package" in Builder.build to be consistent,
e.g. all via the "p" helper variable. No change in functionality, this
is just intended to make the code more readable/consistent (since
prior to this point we had a random mix of "p" and "a.Package").
Change-Id: Ifea5ff9b314c39a0cf6e688511907d08cc56c603
Reviewed-on: https://go-review.googlesource.com/c/go/+/424819
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Add a new hook to allow script tests to check whether a specific
GOEXPERIMENT is enabled.
Updates #51430.
Change-Id: Icdf39f845ff2c8b10c634d49e9c27bc90e7984f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/402174
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Add a new mode of coverage instrumentation that works as a hybrid
between purely tool-based and purely compiler-based. The cmd/cover
tool still does source-to-source rewriting, but it also generates
information to be used by the compiler to do things like marking
meta-data vars as read-only.
In hybrid mode, the cmd/cover tool is invoked not on a single source
file but on all the files in a package, and is passed a config file
containing the import path of the package in question, along with
other parameters needed for the run. It writes a series of modified
files and an output config file to be passed to the compiler when
compiling the modified files.
Not completely useful by itself, still needs a corresponding set of
changes in the Go command and in the compiler.
Updates #51430.
Change-Id: I0fcbd93a9a8fc25064187b159152486a2549ea54
Reviewed-on: https://go-review.googlesource.com/c/go/+/395896
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
This patch fleshes out the runtime support for emitting coverage data
at the end of a run of an instrumented binary. Data is emitted in the
form of a pair of files, a meta-out-file and counter-data-outfile,
each written to the dir GOCOVERDIR. The meta-out-file is emitted only
if required; no need to emit again if an existing meta-data file with
the same hash and length is present.
Updates #51430.
Change-Id: I59d20a4b8c05910c933ee29527972f8e401b1685
Reviewed-on: https://go-review.googlesource.com/c/go/+/355451
Reviewed-by: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Than McIntosh <thanm@google.com>
Add a set of helper packages for reading collections of related
meta-data and counter-data files ("pods") produced by runs of
coverage-instrumented binaries, and a new tool program (cmd/covdata)
for dumping and/or manipulating coverage data files.
Currently "go tool covdata" subcommands include 'merge', 'intersect',
'percent', 'pkglist', 'subtract', 'debugdump', and 'textfmt'
(conversion to the legacy "go tool cover" format).
Updates #51430.
Change-Id: I44167c578f574b4636ab8726e726388531fd3258
Reviewed-on: https://go-review.googlesource.com/c/go/+/357609
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Matches compiler behavior and is consistent with what we do with other
binary operations.
While at it, also use parentheses rather than a colon for a couple of
errors caused by not having a core type.
For #55326.
Change-Id: I0a5cec1a31ffda98d363e5528791965a1ccb5842
Reviewed-on: https://go-review.googlesource.com/c/go/+/435618
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Updates #53466
Change-Id: I08ea279c905e265a579b6b3e23aee012165beaee
Reviewed-on: https://go-review.googlesource.com/c/go/+/431658
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dmitri Goutnik <dgoutnik@gmail.com>
Updates #53466
Change-Id: I17a41adb93c22fa84a7bdcec9d8c65001c5a8ba9
Reviewed-on: https://go-review.googlesource.com/c/go/+/431657
Reviewed-by: Dmitri Goutnik <dgoutnik@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Meng Zhuo <mzh@golangcn.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Change-Id: Ic73d667a98df3f2d1705a67e7e8625c6ba65cc0a
Reviewed-on: https://go-review.googlesource.com/c/go/+/435284
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Change-Id: Ia96ddd520a7bd2fd53bff55315c6fac04ae96a2f
Reviewed-on: https://go-review.googlesource.com/c/go/+/435282
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Change-Id: I3218b1e3f8869f579facddb29471df13c835dc66
Reviewed-on: https://go-review.googlesource.com/c/go/+/435281
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
Updates #53466
Change-Id: I42ca5f1d0f20b5ecfcfba70d298566b6c851fefc
Reviewed-on: https://go-review.googlesource.com/c/go/+/431656
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Meng Zhuo <mzh@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dmitri Goutnik <dgoutnik@gmail.com>
Fix the coversion between our sentinel salt length variables and the
BoringSSL versions in SignRSAPSS. We previously set -1 (hash length
equals salt length) when 0 was passed when we should've been setting
-2. This now matches the conversion that happens in VerifyRSAPSS. Also
adds a note documenting why we do this.
Additionally in non-Boring mode, properly handle passing of salt lengths
with a negative value which aren't one of the magic constants, returning
an error instead of panicking.
See https://commondatastorage.googleapis.com/chromium-boringssl-docs/rsa.h.html#RSA_sign_pss_mgf1
for the BoringSSL docs.
Fixes#54803
Change-Id: Id1bd14dcf0ef4733867367257830ed43e25ef882
Reviewed-on: https://go-review.googlesource.com/c/go/+/426659
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
Run-TryBot: Roland Shoemaker <roland@golang.org>
When a comparison is invalid due to mismatched types, we only know
when we see the 2nd operand; so use that operand's position for the
error message. This matches compiler behavior.
For #55326.
Change-Id: I79450756bbdd2b4bb90ed4e960a451be0197b186
Reviewed-on: https://go-review.googlesource.com/c/go/+/435555
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
An SHT_NOBITS section contains no bytes and occupies no space in the
file. This change makes it return an error on reading from this section
so that it will force the caller to check for an SHT_NNOBITS section.
We have considered another option to return "nil, nil" for the Data
method. It's abandoned because it might lead a program to simply do
the wrong thing, thinking that the section is empty.
Please note that it breaks programs which expect a byte slice with the
length described by the sh_size field. There are two reasons to
introduce this breaking change: 1. SHT_NOBITS means no data and it's
unnecessary to allocate memory for it; 2. it could result in an OOM if
the file is corrupted and has a huge sh_size.
Fixes#54967.
Change-Id: I0c3ed4e097214fe88413d726a89122105ad45d4f
GitHub-Last-Rev: 994c12d9da
GitHub-Pull-Request: golang/go#54994
Reviewed-on: https://go-review.googlesource.com/c/go/+/429601
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
