Also factor out BuildListError to a separate file.
For #36460
Change-Id: Ibd1143893b09a2bbef659bea1e8c5dd35184a7ef
Reviewed-on: https://go-review.googlesource.com/c/go/+/247764
Reviewed-by: Jay Conrod <jayconrod@google.com>
When we print the stack from a BuildListError, we print the main
module first and the error last. That was the opposite of the order in
which in was stored in memory, leading to (arguably) more complex code
and (definitely) my own inability to reason about the contents of the
slice.
For now, it's still more convenient to construct the stack reversed,
so we do that and then reverse it before packing it into the error.
For #36460
Change-Id: I6312fb67b2ad9bf9b64071fe829854833208bad7
Reviewed-on: https://go-review.googlesource.com/c/go/+/244759
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Previously, when we encountered an excluded version in any module's
requirements, we would resolve it to the next higher version.
Unfortunately, the meaning of “the next higher version” can change
over time.
Moreover, users who use 'exclude' directives normally either already
require some higher version (using the 'exclude' directive to prune
out invalid requirements from some intermediate version), or already
require some lower version (using the 'exclude' directive to prevent
'go get -u' from upgrading to a known-bad version). In both of these
cases, resolving an upgrade for the excluded version is needless work
even in the best case: it adds work for the 'go' command when there is
already a perfectly usable selected version of the module in the
requirement graph.
Instead, we now interpret the 'exclude' directive as dropping all
references to the excluded version.
This implements the approach described in
https://golang.org/issue/36465#issuecomment-572694990.
Fixes#36465
Updates #36460
Change-Id: Ibf0187daced417b4cc23b97125826778658e4b0f
Reviewed-on: https://go-review.googlesource.com/c/go/+/244773
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This allows semver-based comparisons of the version without additional allocations.
Also comment on the reason for the loops that iterate over modFile instead.
(I was reading the vendor code in order to add the lazy-loading version check,
and this section was a bit unclear to me.)
For #36460
Change-Id: I11559d81ffb4eba0e4e10e6fa3c01990b11f9180
Reviewed-on: https://go-review.googlesource.com/c/go/+/240622
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Sets Content-Length:0 for nil bodies in PATCH requests, as we already do for POST and PUT requests.
RFC 2616 mentions that unless a method’s Content-Length is forbidden it can send one.
In the wild, we’ve found that Microsoft Azure’s DataLake Gen2 storage API https://docs.microsoft.com/en-us/rest/api/storageservices/datalakestoragegen2/path/update deliberately rejects PATCH requests without a Content-Length, yet there is no workaround for setting that header when trying to flush the content of a file which was uploaded in a previous request.
Fixes#40978
Change-Id: Ib0a623b907d827a1c5ee431dca3c41024fa291c5
GitHub-Last-Rev: 12a3903f2b
GitHub-Pull-Request: golang/go#40991
Reviewed-on: https://go-review.googlesource.com/c/go/+/250039
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Due to a typo, this test case was not actually exercising the bug
described in golang/go#33656. Update it to do so. Interestingly, the
comparison is now valid (as it should be) -- I suspect #33656 is
actually fixed.
Fixes#33656
Change-Id: If50a917f6477d8eb4f82f5a2a96bf5d9123ff0d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/241263
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
These exported functions are mostly trivial wrappers, but do make
certain assumptions about how the underlying Checker APIs can be called.
Add some simple tests.
Change-Id: I68e9ae875353c12d118ec961a6f3834385fbbb97
Reviewed-on: https://go-review.googlesource.com/c/go/+/241262
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
With this patch, opt pass can expose more obvious constant-folding
opportunites.
Example:
func test(i int) int {return (i+8)-(i+4)}
The previous version:
MOVD "".i(FP), R0
ADD $8, R0, R1
ADD $4, R0, R0
SUB R0, R1, R0
MOVD R0, "".~r1+8(FP)
RET (R30)
The optimized version:
MOVD $4, R0
MOVD R0, "".~r1+8(FP)
RET (R30)
This patch removes some existing reassociation rules, such as "x+(z-C)",
because the current generic rewrite rules will canonicalize "x-const"
to "x+(-const)", making "x+(z-C)" equal to "x+(z+(-C))".
This patch also adds test cases.
Change-Id: I857108ba0b5fcc18a879eeab38e2551bc4277797
Reviewed-on: https://go-review.googlesource.com/c/go/+/237137
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This patch adds the ARM6464Bitfield auxInt to auxIntType() and
returns its Go type as "arm64Bitfield" type, which is defined
as int16 type.
And the Go type of SymOff auxInt is int32, but some functions
(such as min(), areAdjacentOffsets() and read16/32/64(),etc.)
use SymOff as an input parameter and treat its type as int64,
this patch adds the type conversion for these rules.
Passes toolstash-check -all.
Change-Id: Ib234b48d0a97ef244dd37878e06b5825316dd782
Reviewed-on: https://go-review.googlesource.com/c/go/+/234378
Reviewed-by: Keith Randall <khr@golang.org>
Add a new conversion function to convert aux type to Op type.
Passes toolstash-check -all.
Change-Id: I25d649a5296f6f178d64320dfc5d291e0a597e24
Reviewed-on: https://go-review.googlesource.com/c/go/+/233739
Reviewed-by: Keith Randall <khr@golang.org>
Add a check code for checking whether the "c" value can be
represented as a signed 32 bit integer in some rules.
Passes toolstash-check -all.
Change-Id: I84e4431dc75945985695516d34565b841c8b53e0
Reviewed-on: https://go-review.googlesource.com/c/go/+/233738
Reviewed-by: Keith Randall <khr@golang.org>
CL 249962 added wasm StorepNoWB implementation in assembly, it's now
like all other architectures. This CL adds a general test that the
second param of StorepNoWB must be force to escape.
Fixes#40975
Change-Id: I1eccc7e50a3ec742a1912d65f25b15f9f5ad9241
Reviewed-on: https://go-review.googlesource.com/c/go/+/249761
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Turns out if your failure is in a function with a name like "Reset()"
there will be a lot of hits on the same hashcode. Adding package sensitivity
solves this problem.
In additionm, it turned out that in the case that a logfile was specified
for the GOSSAHASH logging, that it was opened in create mode, which meant
that multiple compiler invocations would reset the file to zero length.
Opening in append mode works better; the automated harness
(github.com/dr2chase/gossahash) takes care of truncating the file before use.
Change-Id: I5601bc280faa94cbd507d302448831849db6c842
Reviewed-on: https://go-review.googlesource.com/c/go/+/246937
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The second argument of StorepNoWB must be forced to escape.
The current Go code does not explicitly enforce that property.
By implementing in assembly, and not using go:noescape, we
force the issue.
Test is in CL 249761. Issue #40975.
This CL is needed for CL 249917, which changes how go:notinheap
works and breaks the previous StorepNoWB wasm code.
I checked for other possible errors like this. This is the only
go:notinheap that isn't in the runtime itself.
Change-Id: I43400a806662655727c4a3baa8902b63bdc9fa57
Reviewed-on: https://go-review.googlesource.com/c/go/+/249962
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
More ergonomic that way. Also change Haspointers to HasPointers
while we are here.
Change-Id: I45bedc294c1a8c2bd01dc14bd04615ae77555375
Reviewed-on: https://go-review.googlesource.com/c/go/+/249959
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
go1.14 drop nacl support, as go1.15 was released, go1.13 is not
supported anymore, nacl is absolutely gone.
Change-Id: I05efb46891ec875b08da8f2996751a8e9cb57d0c
Reviewed-on: https://go-review.googlesource.com/c/go/+/249977
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Current peFile.goarch looks for symbols like "_rt0_386_windows" to
determine GOARCH. But "_rt0_386_windows" is not present in executables
built with cgo.
Use pe.FileHeader.Machine instead. This should work with any Windows
executable, not just with Go built executable.
Fixes#39682
Change-Id: Ie0ffce664f4b8b8fed69b2ecc482425b042a38d5
Reviewed-on: https://go-review.googlesource.com/c/go/+/240957
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
In
type T1 struct { t2 }
type t2 int
func (t2) M()
T1 has method M because it embeds t2, which has M. Classify
the example
func ExampleT1_M
with T1 instead of ignoring it, as is done currently. There is no
other way to provide an example for such a method, since its original
type is unexported.
Continue to ignore examples on methods from embedded types that are
exported, unless in AllMethods mode. Examples for those methods could
be written on the original type.
The change involves removing a check in classifyExamples. The check
isn't necessary to get the above behavior because
reader.collectEmbeddedMethods and sortedFuncs already generate the
appropriate list of methods.
For #40172.
Change-Id: Ibe7d965ecba6426466184e6e6655fc05989e9caf
Reviewed-on: https://go-review.googlesource.com/c/go/+/249557
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Implementing the suggestion made by bcmills on a comment on golang.org/cl/228783.
Change-Id: I314a24a002c65b582ea51610dcc1a54a69afbb8c
Reviewed-on: https://go-review.googlesource.com/c/go/+/229705
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Add information that error comes from parsing module proxy responses.
Fixes#38680
Change-Id: Ic318b9cdbca789c1b0d983e083e692a914892fbd
Reviewed-on: https://go-review.googlesource.com/c/go/+/233437
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
The documentation refers to a non longer existing flag (-seq).
Remove those references.
Change-Id: I480b6259f9199b47761dc655a90911eabfe07427
Reviewed-on: https://go-review.googlesource.com/c/go/+/249738
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
checkptr has code to recognize &^ expressions, but it didn't take into
account that "p &^ x" gets rewritten to "p & ^x" during walk, which
resulted in false positive diagnostics.
This CL changes walkexpr to mark OANDNOT expressions with Implicit
when they're rewritten to OAND, so that walkCheckPtrArithmetic can
still recognize them later.
It would be slightly more idiomatic to instead mark the OBITNOT
expression as Implicit (as it's a compiler-generated Node), but the
OBITNOT expression might get constant folded. It's not worth the extra
complexity/subtlety of relying on n.Right.Orig, so we set Implicit on
the OAND node instead.
To atone for this transgression, I add documentation for nodeImplicit.
Fixes#40917.
Change-Id: I386304171ad299c530e151e5924f179e9a5fd5b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/249477
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The optimization that replaces inline markers with pre-existing
instructions assumes that 'Prog' values produced by the compiler are
still reachable after the assembler has run. This was not true on
s390x where the assembler was removing NOP instructions from the
linked list of 'Prog' values. This led to broken inlining data
which in turn caused an infinite loop in the runtime traceback code.
Fix this by stopping the s390x assembler backend removing NOP
values. It does not make any difference to the output of the
assembler because NOP instructions are 0 bytes long anyway.
Fixes#40473.
Change-Id: I9b97c494afaae2d5ed6bca4cd428b4132b5f8133
Reviewed-on: https://go-review.googlesource.com/c/go/+/249448
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This change does context propagation (and only context propagation)
necessary to add context to modfetch.Download and pkg.LoadImport.
This was done by adding context to their callers, and then
adding context to all call-sites, and then repeating adding
context to callers of those enclosing functions and their
callers until none were left. In some cases the call graph expansion
was pruned by using context.TODOs.
The next CL will add a span to Download. I kept it out of this
change to avoid making it any larger (and harder to review)
than it needs to be.
Updates #38714
Change-Id: I7a03416e04a14ca71636d96f2c1bda2c4c30d348
Reviewed-on: https://go-review.googlesource.com/c/go/+/249021
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Opening the html writer can fail, and the failure printer wants
to use the entry block's line number. So make sure we set up
the entry block first.
Fixes#40919
Change-Id: I4ffa2839b45a721bbaf04ff84418e8108fa1cc37
Reviewed-on: https://go-review.googlesource.com/c/go/+/249497
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This has already been done for s390x, ppc64. This CL is for
all the other architectures.
Fixes#40796
Change-Id: Idd1816e057df63022d47e99fa06617811d8c8489
Reviewed-on: https://go-review.googlesource.com/c/go/+/248684
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When using a FUSE file system, any system call that touches the file
system can return EINTR.
Fixes#40846
Change-Id: I25d32da22cec08dea81ab297291a85ad72db2df7
Reviewed-on: https://go-review.googlesource.com/c/go/+/249178
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
par.Work is used in a number of places as a parallel
work queue. This change replaces it with goroutines
and channels in a number of simpler places where it's
used.
This is the same CL as golang.org/cl/240062 and golang.org/cl/248326
except for the following changes in convert.go (all line numbers
from this CL), as well as fixing up imports in download.go:
- On line 44, the "*" before modules.Versions is removed (we were
trying to assign to a nil value on lines 72 and 73).
- Line 64 is new, and ensures that we receive on the semaphore
channel once the goroutine function exits. (The previous versions
of this CL only received at the end of the function, ignoring
the return point in the branch in the middle of the function.)
- The semaphore channel receive right before line 74 is gone,
replaced with the deferred receive above.
- The if block at line 83 is new, accounting for cases where
modfetch.ImportRepoRev returned an error in the goroutine,
so that versions[i] is ignored.
Change-Id: I0e33670bb2eb0a1e4d7a5fa693a471e61ffbc8b7
Reviewed-on: https://go-review.googlesource.com/c/go/+/249020
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
These are the indexed vsx load operations with the
same endian and alignment benefits of {l,st}vx.
Likewise, cleanup redundant comments in op{load,store}x and
fix ISA 3.0 typos nearby.
Change-Id: Ie1ace17c6150cf9168a834e435114028ff6eb07c
Reviewed-on: https://go-review.googlesource.com/c/go/+/249025
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Ignore all _test.s files in bootstrap, not only the ARM64 one.
They are for testing only.
Fixes#40855.
Change-Id: I00e6b4ab5349e317c9ad3a503997de85aed49373
Reviewed-on: https://go-review.googlesource.com/c/go/+/249018
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Previously, on Unix systems, when the profiler was enabled or disabled,
we called setitimer once per thread. With this change we instead call
it once per process.
Change-Id: I90f0189b562e11232816390dc7d55ed154bd836d
Reviewed-on: https://go-review.googlesource.com/c/go/+/240003
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
People sometimes expect Join to trim .. components from its arguments
before joining, and are surprised that it doesn't. This is bad if they
were relying on that assumed behaviour to prevent directory traversal
attacks.
While a careful reading of the documentation for Join and Clean
might dispel this notion, it is not obvious at first glance.
Add a case to the examples to nudge people in the right direction.
Updates #40373
Change-Id: Ib5792c12ba1000811a0c0eb77048196d0b26da60
Reviewed-on: https://go-review.googlesource.com/c/go/+/249177
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
io.ReadFull guarantees n == len(buf) if and only if err == nil,
so the length check is redundant.
Change-Id: I15bff97868e27a65648acd791883cac8dab77630
Reviewed-on: https://go-review.googlesource.com/c/go/+/232988
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
