Fixes#12301
Change-Id: I8d01ec9551c6cff7e6129e06a7deb36a3be9de41
Reviewed-on: https://go-review.googlesource.com/16751
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change-Id: I1da1d718609eb6a7b78d29b173ec780bde22c687
Reviewed-on: https://go-review.googlesource.com/16422
Reviewed-by: Ralph Corderoy <ralph@inputplus.co.uk>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
https://tools.ietf.org/html/rfc6066#section-3 states:
“Literal IPv4 and IPv6 addresses are not permitted in "HostName".”
However, if an IP literal was set as Config.ServerName (which could
happen as easily as calling Dial with an IP address) then the code would
send the IP literal as the SNI value.
This change filters out IP literals, as recognised by net.ParseIP, from
being sent as the SNI value.
Fixes#13111.
Change-Id: Ie9ec7acc767ae172b48c9c6dd8d84fa27b1cf0de
Reviewed-on: https://go-review.googlesource.com/16742
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
The heuristic for determining if the packages or commands are stale
fails as the mtime comparison happens even though the GOROOT and
current package paths are the same, since the path name isn't
canonicalized before the comparison (GOROOT is).
Fixes: #12690
Change-Id: Ia7d142fbbed8aac2bd2f71d1db4efd1f3ff5aece
Reviewed-on: https://go-review.googlesource.com/16483
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change is the same as CL #9345 which was reverted,
except for a small bug fix.
The only change is to the body of sendDirect and its callsite.
Also added a test.
The problem was during a channel send operation. The target
of the send was a sleeping goroutine waiting to receive. We
basically do:
1) Read the destination pointer out of the sudog structure
2) Copy the value we're sending to that destination pointer
Unfortunately, the previous change had a goroutine suspend
point between 1 & 2 (the call to sendDirect). At that point
the destination goroutine's stack could be copied (shrunk).
The pointer we read in step 1 is no longer valid for step 2.
Fixed by not allowing any suspension points between 1 & 2.
I suspect the old code worked correctly basically by accident.
Fixes#13169
The original 9345:
This change removes the retry mechanism we use for buffered channels.
Instead, any sender waking up a receiver or vice versa completes the
full protocol with its counterpart. This means the counterpart does
not need to relock the channel when it wakes up. (Currently
buffered channels need to relock on wakeup.)
For sends on a channel with waiting receivers, this change replaces
two copies (sender->queue, queue->receiver) with one (sender->receiver).
For receives on channels with a waiting sender, two copies are still required.
This change unifies to a large degree the algorithm for buffered
and unbuffered channels, simplifying the overall implementation.
Fixes#11506
Change-Id: I57dfa3fc219cffa4d48301ee15fe5479299efa09
Reviewed-on: https://go-review.googlesource.com/16740
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Error doesn't take a format string and appends its own newline. Phrase
the error like the other ones.
Change-Id: Ic3af857e5d4890207c74a6eb59a0d1067b503e1b
Reviewed-on: https://go-review.googlesource.com/16420
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Updates to git rev 042ba42f (https://golang.org/cl/16734)
This moves all the code for glueing the HTTP1 and HTTP2 transports
together out of net/http and into x/net/http2 where others can use it,
and where it has tests.
Change-Id: I143ac8bb61eed36c87fd838b682ebb37b81b8c2c
Reviewed-on: https://go-review.googlesource.com/16735
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Mathieu Lonjaret <mathieu.lonjaret@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is needed now for subrepos to be able to conditionally use
API symbols found only after Go 1.5.
Change-Id: I91f8a1154e2a74008e8ca79490e3f12847f9c3b2
Reviewed-on: https://go-review.googlesource.com/16733
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Mathieu Lonjaret <mathieu.lonjaret@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
duffzero was changed to use X0 instead of AX in
CL 14408. This was missed as part of that change.
Change-Id: I72fb0114cfbc035b83bfaa8631d27e6740da2652
Reviewed-on: https://go-review.googlesource.com/16717
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Other systems use pthread_sigmask. It was a mistake to use sigprocmask
here.
Change-Id: Ie045aa3f09cf035fcf807b7543b96fa5b847958a
Reviewed-on: https://go-review.googlesource.com/16720
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The GODEBUG option remains, for now, but only for turning it off.
We'll decide what to do with it before release.
This CL includes the dependent http2 change (https://golang.org/cl/16692)
in the http2 bundle (h2_bundle.go).
Updates golang/go#6891
Change-Id: If9723ef627c7ba4f7343dc8cb89ca88ef0fbcb10
Reviewed-on: https://go-review.googlesource.com/16693
Reviewed-by: Blake Mizerany <blake.mizerany@gmail.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make sure that we're moving or zeroing pointers atomically.
Anything that is a multiple of pointer size and at least
pointer aligned might have pointers in it. All the code looks
ok except for the 1-pointer-sized moves.
Fixes#13160
Update #12552
Change-Id: Ib97d9b918fa9f4cc5c56c67ed90255b7fdfb7b45
Reviewed-on: https://go-review.googlesource.com/16668
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Duffcopy now uses X0, as of 5cf281a. Teach the peephole
optimizer that duffcopy clobbers X0 so that it does not
rename registers use X0 across the duffcopy instruction.
Fixes#13171
Change-Id: I389cbf1982cb6eb2f51e6152ac96736a8589f085
Reviewed-on: https://go-review.googlesource.com/16715
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
Revert for now until #13169 is understood.
This reverts commit 8e496f1d69.
Change-Id: Ib3eb2588824ef47a2b6eb9e377a24e5c817fcc81
Reviewed-on: https://go-review.googlesource.com/16716
Reviewed-by: Keith Randall <khr@golang.org>
They reportedly occur with LLVM 3.7 on FreeBSD ARM.
Fixes#13139.
Change-Id: Ia7d053a8662696b1984e81fbd1d908c951c35a98
Reviewed-on: https://go-review.googlesource.com/16667
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Motivation:
* Reader.skipUnread never reports io.ErrUnexpectedEOF. This is strange
given that io.ErrUnexpectedEOF is given through Reader.Read if the
user manually reads the file.
* Reader.skipUnread fails to detect truncated files since io.Seeker
is lazy about reporting errors. Thus, the behavior of Reader differs
whether the input io.Reader also satisfies io.Seeker or not.
To solve this, we seek to one before the end of the data section and
always rely on at least one call to io.CopyN. If the tr.r satisfies
io.Seeker, this is guarunteed to never read more than blockSize.
Fixes#12557
Change-Id: I0ddddfc6bed0d74465cb7e7a02b26f1de7a7a279
Reviewed-on: https://go-review.googlesource.com/15175
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
TestBuildOutputToDevNull was added in CL 16585.
However, copying to /dev/null couldn't work on Plan 9,
because /dev/null is a regular file. Since it's not
different from any other file, the logic in copyFile
couldn't distinguish it from another, already existing,
file, that we wouldn't want to overwrite.
Change-Id: Ie8d353f318fedfc7cfb9541fed00a2397e232592
Reviewed-on: https://go-review.googlesource.com/16691
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: David du Colombier <0intro@gmail.com>
sradi and sradi. hide the top bit of their immediate argument apart from the
rest of it, but the code only handled the sradi case.
I'm pretty sure this is the only instruction missing (a couple of the rotate
instructions encode their immediate the same way but their handling looks OK).
This fixes the failure of "GOARCH=amd64 ~/go/bin/go install -v runtime" as
reported in the bug.
Fixes#11987
Change-Id: I0cdefcd7a04e0e8fce45827e7054ffde9a83f589
Reviewed-on: https://go-review.googlesource.com/16710
Reviewed-by: Minux Ma <minux@golang.org>
TestGoGenerateEnv was added in CL 16537.
However, Plan 9 doesn't have the env command.
Change-Id: I5f0c937a1b9b456dcea41ceac7865112f2f65c45
Reviewed-on: https://go-review.googlesource.com/16690
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David du Colombier <0intro@gmail.com>
Currently mallocgc detects if the GC is in a state where it can't
assist, but also can't allocate uncontrolled and yields to help out
the GC. This was a workaround for periods when we were trying to
schedule the GC coordinator. It is no longer necessary because there
is no GC coordinator and malloc can always assist with any GC
transitions that are necessary.
Updates #11970.
Change-Id: I4f7beb7013e85e50ae99a3a8b0bb708ba49cbcd4
Reviewed-on: https://go-review.googlesource.com/16392
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This moves all of the mark 1 to mark 2 transition and mark termination
to the mark done transition function. This means these transitions are
now handled on the goroutine that detected mark completion. This also
means that the GC coordinator and the background completion barriers
are no longer used and various workarounds to yield to the coordinator
are no longer necessary. These will be removed in follow-up commits.
One consequence of this is that mark workers now need to be
preemptible when performing the mark done transition. This allows them
to stop the world and to perform the final clean-up steps of GC after
restarting the world. They are only made preemptible while performing
this transition, so if the worker findRunnableGCWorker would schedule
isn't available, we didn't want to schedule it anyway.
Fixes#11970.
Change-Id: I9203a2d6287eeff62d589ec02ad9cb1e29ddb837
Reviewed-on: https://go-review.googlesource.com/16391
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently gcMarkDone takes basically no time, so it's okay to account
the worker time after calling it. However, gcMarkDone is about to take
potentially *much* longer because it may perform all of mark
termination. Prepare for this by swapping the order so we account the
time before calling gcMarkDone.
Change-Id: I90c7df68192acfc4fd02a7254dae739dda4e2fcb
Reviewed-on: https://go-review.googlesource.com/16390
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently the code for completion of mark 1/mark 2 is duplicated in
background workers and assists. Factor this in to a single function
that will serve as the transition function for concurrent mark.
Change-Id: I4d9f697a15da0d349db3b34d56f3a220dd41d41b
Reviewed-on: https://go-review.googlesource.com/16359
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, findRunnableGCWorker will perform mark completion if there
is no remaining work and no running workers. This used to be necessary
to resolve a race in the transition from mark 1 to mark 2 where we
would enter mark 2 with no mark work (and no dedicated workers), so no
workers would run, so no worker would signal mark completion.
However, we're about to make mark completion also perform the entire
follow-on process, which includes mark termination. We really don't
want to do that in the scheduler if it happens to detect completion.
Conveniently, this hack is no longer necessary because we always
enqueue root scanning work at the beginning of both mark 1 and mark 2,
so a mark worker will always run. Hence, we can simply eliminate it.
Change-Id: I3fc8f27c8da632f0fb732c9f6425e1f457f5652e
Reviewed-on: https://go-review.googlesource.com/16358
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, we don't start dedicated or fractional mark workers unless
the mark 1 or mark 2 barriers have been cleared. One intended
consequence of this is that no background workers run between the
forEachP that disposes all gcWork caches and the beginning of mark 2.
However, we (unintentionally) did not apply this restriction to idle
mark workers. As a result, these can start in the interim between mark
1 completion and mark 2 starting. This explains why it was necessary
to reset the root marking jobs using carefully ordered atomic writes
when setting up mark 2. It also means that, even though we definitely
enqueue work before starting mark 2, it may be drained by the time we
reset the mark 2 barrier. If this happens, currently the only thing
preventing the runtime from deadlocking is that the scheduler itself
also checks for mark completion and will signal mark 2 completion.
Were it not for the odd behavior of idle workers, this check in the
scheduler would not be necessary.
Clean all of this up and prepare to remove this check in the scheduler
by applying the same restriction to starting idle mark workers.
Change-Id: Ic1b479e1591bd7773dc27b320ca399a215603b5a
Reviewed-on: https://go-review.googlesource.com/16631
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This moves all of GC initialization, sweep termination, and the
transition to concurrent marking in to the off->mark transition
function. This means it's now handled on the goroutine that detected
the state exit condition.
As a result, malloc no longer needs to Gosched() at the beginning of
the GC cycle to prevent over-allocation while the GC is starting up
because it will now *help* the GC to start up. The Gosched hack is
still necessary during GC shutdown (this is easy to test by enabling
gctrace and hitting Ctrl-S to block the gctrace output).
At this point, the GC coordinator still handles later phases. This
requires a small tweak to how we start the GC coordinator. Currently,
starting the GC coordinator is best-effort and may fail if the
coordinator is about to park from the previous cycle but hasn't yet.
We fix this by replacing the park/ready to wake up the coordinator
with a semaphore. This is temporary since the coordinator will be
going away in a few commits.
Updates #11970.
Change-Id: I2c6a11c91e72dfbc59c2d8e7c66146dee9a444fe
Reviewed-on: https://go-review.googlesource.com/16357
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This moves concurrent sweep termination from the coordinator to the
off->mark transition. This allows it to be performed by all Gs
attempting to start the GC.
Updates #11970.
Change-Id: I24428e8599a759398c2ef7ec996ba755a448f947
Reviewed-on: https://go-review.googlesource.com/16356
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This begins the conversion of the centralized GC coordinator to a
decentralized state machine by introducing the internal API that
triggers the first state transition from _GCoff to _GCmark (or
_GCmarktermination).
This change introduces the transition lock, the off->mark transition
condition (which is very similar to shouldtriggergc()), and the
general structure of a state transition. Since we're doing this
conversion in stages, it then falls back to the GC coordinator to
actually execute the cycle. We'll start moving logic out of the GC
coordinator and in to transition functions next.
This fixes a minor bug in gcstoptheworld debug mode where passing the
heap trigger once could trigger multiple STW GCs.
Updates #11970.
Change-Id: I964087dd190a639eb5766398f8e1bbf8b352902f
Reviewed-on: https://go-review.googlesource.com/16355
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
For historical reasons we currently do a lot of the concurrent mark
setup on the system stack. In fact, at this point the one and only
thing that needs to happen on the system stack is the start-the-world.
Clean up this code by lifting everything other than the
start-the-world off the system stack.
The diff for this change looks large, but the only code change is to
narrow the systemstack call. Everything else is re-indentation.
Change-Id: I1e03b8afc759fad726f2397b05a17d183c2713ce
Reviewed-on: https://go-review.googlesource.com/16354
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We're about to split func gc across several functions, so lift the
local variables it uses for tracking statistics and state across the
cycle into the global "work" variable.
Change-Id: Ie955f2f1758c7f5a5543ea1f3f33b222bc4b1d37
Reviewed-on: https://go-review.googlesource.com/16353
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Put 'r' first because that is the command, and 'c' is the modifier.
Keep 'c' because it means to not warn when creating an archive.
Drop 'u' because it is unnecessary and fails on Arch Linux.
No test because this is only for gccgo (I tested it manually).
Fixes#12310.
Change-Id: Id740257fb1c347dfaa60f7d613af2897dae2c059
Reviewed-on: https://go-review.googlesource.com/16664
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
