We need to use the same marker everywhere. My CL to rename the
marker (CL 241661) and the CL to add more uses of the marker
under the old name (CL 241678) weren't coordinated with each other.
Fixes#52612
Change-Id: I97023c0769e518491924ef457fe03bf64a2cefa6
Reviewed-on: https://go-review.googlesource.com/c/go/+/403094
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Accept ~x as ordinary unary expression in the parser but recognize
such expressions as invalid in the type checker.
This change opens the door to recognizing complex type constraint
literals such as `*E|~int` in `[P *E|~int]` and parse them correctly
instead of reporting a parse error because `P*E|~int` syntactically
looks like an incorrect array length expression (binary expression
where the RHS of | is an invalid unary expression ~int).
As a result, the parser is more forgiving with expressions but the
type checker will reject invalid uses as before.
We could pass extra information into the binary/unary expression
parse functions to prevent the use of ~ in invalid situations but
it doesn't seem worth the trouble. In fact it may be advantageous
to allow a more liberal expression syntax especially in the presence
of errors (better parser synchronization after an error).
Preparation for fixing #49482.
Change-Id: I119e8bd9445dfa6460fcd7e0658e3554a34b2769
Reviewed-on: https://go-review.googlesource.com/c/go/+/402255
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Fixes#52438.
Change-Id: I5cbf8c448dba037e9e0c5fe8f209401d6bf7d43f
Reviewed-on: https://go-review.googlesource.com/c/go/+/401134
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
After CL 398014 fixed a compiler deadlock on syntax errors,
this CL adds a test case and more details for that.
How it was fixed:
CL 57751 introduced a channel "sem" to limit the number of
simultaneously open files.
Unfortunately, when the number of syntax processing goroutines
exceeds this limit, will easily trigger deadlock.
In the original implementation, "sem" only limited the number
of open files, not the number of concurrent goroutines, which
will cause extra goroutines to block on "sem". When the p.err
of the following iteration happens to be held by the blocking
goroutine, it will fall into a circular wait, which is a deadlock.
CL 398014 fixed the above deadlock, also see issue #52127.
First, move "sem <- struct{}{}" to the outside of the syntax
processing goroutine, so that the number of concurrent goroutines
does not exceed the number of open files, to ensure that all
goroutines in execution can eventually write to p.err.
Second, move the entire syntax processing logic into a separate
goroutine to avoid blocking on the producer side.
Change-Id: I1bb89bfee3d2703784f0c0d4ded82baab2ae867a
Reviewed-on: https://go-review.googlesource.com/c/go/+/399054
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Fixes#52278
Change-Id: Ibf67c7b019feec277d316e04d93b458efea133fb
Reviewed-on: https://go-review.googlesource.com/c/go/+/399574
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
For syntax errors in various (syntactic) lists, instead of reporting
a set of "expected" tokens (which may be incomplete), provide context
and mention "possibly missing" tokens. The result is a friendlier and
more accurate error message.
Fixes#49205.
Change-Id: I38ae7bf62febfe790075e62deb33ec8c17d64476
Reviewed-on: https://go-review.googlesource.com/c/go/+/396914
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When parsing method declarations in an interface, the parser has
for historic reasons gracefully handled a list of method names with
a single (common) signature, and then reported an error. For example
interface {
m1, m2, m3 (x int)
}
This code originally came from the very first parser for Go which
initially permitted such declarations (or at least assumed that
people would write such declarations). Nobody is doing this at this
point, so there's no need for being extra careful here. Remove the
respective code and adjust the corresponding test.
Change-Id: If6f9b398bbc9e425dcd4328a80d8bf77c37fe8b6
Reviewed-on: https://go-review.googlesource.com/c/go/+/396654
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 367755 added soleComponent for handling 1-byte type interface conversion.
This implementation must be kept in sync with Type.SoleComponent, but it
does not. When seeing a blank field in struct, we must continue looking
at the field type to find sole component, if any. The current code just
terminate immediately, which causes wrong sole component type returned.
Fixes#52020
Change-Id: I4f506fe094fa7c5532de23467a4f9139476bb0a4
Reviewed-on: https://go-review.googlesource.com/c/go/+/396614
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Use the 1.17 compiler error message, sans "array" prefix.
Change-Id: I0e70781c5ff02dca30a2004ab4d0ea82b0849eae
Reviewed-on: https://go-review.googlesource.com/c/go/+/396296
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Historically, we sometimes recorded imports based on either package
path ("net/http") or object file path ("net/http.a"). But modern Go
build systems always use package path, and the extra ".a" suffix
doesn't mean anything anyway.
Change-Id: I6060ef8bafa324168710d152a353f4d8db062133
Reviewed-on: https://go-review.googlesource.com/c/go/+/395254
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
This CL updates test/run.go to compile xxx.dir/x.go with a package
path of "test/x" instead of just "x". This prevents collisions with
standard library packages.
It also requires updating a handful of tests to account for the
updated package paths.
Fixes#25693.
Change-Id: I49208c56ab3cb229ed667d547cd6e004d2175fcf
Reviewed-on: https://go-review.googlesource.com/c/go/+/395258
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
bug302 compiles p.go with -p=p, and then manually creates a pp.a
archive, and imports it as both "p" and "pp". This is a misuse of
cmd/compile's -p flag, and it isn't representative of how any actual
Go build systems work anyway.
This test made sense back when cmd/compile still wrote out bare object
files, which was then split into separate __.PKGDEF and _go_.o archive
entries when added to a pack archive. But since CL 102236, cmd/compile
always writes out pack files.
Updates #51734.
Change-Id: I4b5de22d348ecc0a72c98b512351c2d267c77736
Reviewed-on: https://go-review.googlesource.com/c/go/+/393896
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, run.go's *dir tests allow "x.go" to be imported
interchangeably as either "x" or "./x". This is generally fine, but
can cause problems when "x" is the name of a standard library
package (e.g., "fixedbugs/bug345.dir/io.go").
This CL is an automated rewrite to change all `import "x"` directives
to use `import "./x"` instead. It has no effect today, but will allow
subsequent CLs to update test/run.go to resolve "./x" to "test/x" to
avoid stdlib collisions.
Change-Id: Ic76cd7140e83b47e764f8a499e59936be2b3c876
Reviewed-on: https://go-review.googlesource.com/c/go/+/395116
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 342350 fixed deadcode panic with dead hidden closures. However, a
closure may contains nested dead hidden closures, so we need to mark
them dead as well.
Fixes#51839
Change-Id: Ib54581adfc1bdea60e74d733cd30fd8e783da983
Reviewed-on: https://go-review.googlesource.com/c/go/+/394079
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
The -p flag specifies the import path of the package being compiled.
This CL makes it required when invoking the compiler and
adjusts tests that invoke the compiler directly to conform to this
new requirement. The go command already passes the flag, so it
is unmodified in this CL. It is expected that any other Go build systems
also already pass -p, or else they will need to arrange to do so before
updating to Go 1.19. Of particular note, Bazel already does for rules
with an importpath= attribute, which includes all Gazelle-generated rules.
There is more cleanup possible now in cmd/compile, cmd/link,
and other consumers of Go object files, but that is left to future CLs.
Additional historical background follows but can be ignored.
Long ago, before the go command, or modules, or any kind of
versioning, symbols in Go archive files were named using just the
package name, so that for example func F in math/rand and func F in
crypto/rand would both be the object file symbol 'rand.F'. This led to
collisions even in small source trees, which made certain packages
unusable in the presence of other packages and generally was a problem
for Go's goal of scaling to very large source trees.
Fixing this problem required changing from package names to import
paths in symbol names, which was mostly straightforward. One wrinkle,
though, is that the compiler did not know the import path of the
package being compiled; it only knew the package name. At the time,
there was no go command, just Makefiles that people had invoking 6g
(now “go tool compile”) and then copying the resulting object file to
an importable location. That is, everyone had a custom build setup for
Go, because there was no standard one. So it was not particularly
attractive to change how the compiler was invoked, since that would
break approximately every Go user at the time. Instead, we arranged
for the compiler to emit, and other tools reading object files to
recognize, a special import path (the empty string, it turned out)
denoting “the import path of this object file”. This worked well
enough at the time and maintained complete command-line compatibility
with existing Go usage.
The changes implementing this transition can be found by searching
the Git history for “package global name space”, which is what they
eliminated. In particular, CL 190076 (a6736fa4), CL 186263 (758f2bc5),
CL 193080 (1cecac81), CL 194053 (19126320), and CL 194071 (531e6b77)
did the bulk of this transformation in January 2010.
Later, in September 2011, we added the -p flag to the compiler for
diagnostic purposes. The problem was that it was easy to create import
cycles, especially in tests, and these could not be diagnosed until
link time. You'd really want the compiler to diagnose these, for
example if the compilation of package sort noticed it was importing a
package that itself imported "sort". But the compilation of package
sort didn't know its own import path, and so it could not tell whether
it had found itself as a transitive dependency. Adding the -p flag
solved this problem, and its use was optional, since the linker would
still diagnose the import cycle in builds that had not updated to
start passing -p. This was CL 4972057 (1e480cd1).
There was still no go command at this point, but when we introduced
the go command we made it pass -p, which it has for many years at this
point.
Over time, parts of the compiler began to depend on the presence of
the -p flag for various reasonable purposes. For example:
In CL 6497074 (041fc8bf; Oct 2012), the race detector used -p to
detect packages that should not have race annotations, such as
runtime/race and sync/atomic.
In CL 13367052 (7276c02b; Sep 2013), a bug fix used -p to detect the
compilation of package reflect.
In CL 30539 (8aadcc55; Oct 2016), the compiler started using -p to
identify package math, to be able to intrinsify calls to Sqrt inside
that package.
In CL 61019 (9daee931; Sep 2017), CL 71430 (2c1d2e06; Oct 2017), and
later related CLs, the compiler started using the -p value when
creating various DWARF debugging information.
In CL 174657 (cc5eaf93; May 2019), the compiler started writing
symbols without the magic empty string whenever -p was used, to reduce
the amount of work required in the linker.
In CL 179861 (dde7c770; Jun 2019), the compiler made the second
argument to //go:linkname optional when -p is used, because in that
case the compiler can derive an appropriate default.
There are more examples. Today it is impossible to compile the Go
standard library without using -p, and DWARF debug information is
incomplete without using -p.
All known Go build systems pass -p. In particular, the go command
does, which is what nearly all Go developers invoke to build Go code.
And Bazel does, for go_library rules that set the importpath
attribute, which is all rules generated by Gazelle.
Gccgo has an equivalent of -p and has required its use in order to
disambiguate packages with the same name but different import paths
since 2010.
On top of all this, various parts of code generation for generics
are made more complicated by needing to cope with the case where -p
is not specified, even though it's essentially always specified.
In summary, the current state is:
- Use of the -p flag with cmd/compile is required for building
the standard library, and for complete DWARF information,
and to enable certain linker speedups.
- The go command and Bazel, which we expect account for just
about 100% of Go builds, both invoke cmd/compile with -p.
- The code in cmd/compile to support builds without -p is
complex and has become more complex with generics, but it is
almost always dead code and therefore not worth maintaining.
- Gccgo already requires its equivalent of -p in any build
where two packages have the same name.
All this supports the change in this CL, which makes -p required
and adjusts tests that invoke cmd/compile to add -p appropriately.
Future CLs will be able to remove all the code dealing with the
possibility of -p not having been specified.
Change-Id: I6b95b9d4cffe59c7bac82eb273ef6c4a67bb0e43
Reviewed-on: https://go-review.googlesource.com/c/go/+/391014
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If you attempt to instantiate a generic type or func and run 'go build'
with a language version < 1.18 in the 'go' directive inside the go.mod
file, cmd/compile emits a friendly message that includes the suggestion
to 'check go.mod':
type instantiation requires go1.18 or later (-lang was set to go1.17; check go.mod)
However, if the code instead only declares a generic type or func
without instantiating, cmd/compile currently emits a less friendly
message:
type parameters require go1.18 or later
With this CL, the error in that situation becomes:
type parameter requires go1.18 or later (-lang was set to go1.17; check go.mod)
Within cmd/compile/internal/types2, it already calls check.versionErrorf
in a dozen or so places, including three existing calls to
check.versionErrorf within typeset.go (e.g., for embedding a constraint
interface).
This CL adds two more calls to check.versionErrorf, replacing calls to
check.softErrorf. Both check.versionErrorf and check.softErrorf call
check.err(at, <string>, true) after massaging the string message.
Fixes#51531
Change-Id: If54e179f5952b97701d1dfde4abb08101de07811
GitHub-Last-Rev: b0b7c1346f
GitHub-Pull-Request: golang/go#51536
Reviewed-on: https://go-review.googlesource.com/c/go/+/390578
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Robert Findley <rfindley@google.com>
Also correct scope position for such variables.
Adjusted some comments.
Fixes#51437.
Change-Id: Ic49a1459469c8b2c7bc24fe546795f7d56c67cb4
Reviewed-on: https://go-review.googlesource.com/c/go/+/389594
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Findley <rfindley@google.com>
We use AutogeneratedPos for most compiler-generated functions. But
for method value wrappers we currently don't. Instead, we use the
Pos for their (direct) declaration if there is one, otherwise
not set it in methodValueWrapper, which will probably cause it to
inherit from the caller, i.e. the Pos of that method value
expression. If that Pos has inline information, it will cause the
method wrapper to have bogus inline information, which could lead
to infinite loop when printing a stack trace.
Change it to use AutogeneratedPos instead.
Fixes#51401.
Change-Id: I398dfe85f9f875e1fd82dc2f489dab63ada6570d
Reviewed-on: https://go-review.googlesource.com/c/go/+/388794
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The next CL will remove the -G flag, effectively hard-coding it to its
current default (-G=3).
Change-Id: Ib4743b529206928f9f1cca9fdb19989728327831
Reviewed-on: https://go-review.googlesource.com/c/go/+/388534
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Pointer comparison is lowered to the following on RISCV64
(EqPtr x y) => (SEQZ (SUB <x.Type> x y))
The difference of two pointers (the SUB) should not be pointer
type. Otherwise it can cause the GC to find a bad pointer.
Should fix#51101.
Change-Id: I7e73c2155c36ff403c032981a9aa9cccbfdf0f64
Reviewed-on: https://go-review.googlesource.com/c/go/+/385655
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Change-Id: Ie949f2131845f9f9292caff798f6933648779122
Reviewed-on: https://go-review.googlesource.com/c/go/+/385434
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
If an invalid array length is just an identifier, mention
"array length" so that it's clear this is an invalid array
declaration and not a (invalid) generic type declaration.
Fixes#51145.
Change-Id: I8878cbb6c7b1277fc0a9a014712ec8d55499c5c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/385255
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Change run.go to apply the GO_TEST_TIMEOUT_SCALE scaling factor to
test timeouts (mentioned in "-t" clause in test header).
Also with this patch, bump up the timeout for fixedbugs/issue46234.go
from 30 to 45 seconds, to avoid flakes on very slow builders.
Updates #50973.
Change-Id: Icbafa482860e24cc1e72fee53511bcc764d06bf1
Reviewed-on: https://go-review.googlesource.com/c/go/+/382774
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Refactor Checker.comparison such that its logic is easier to reason
about and so that special cases can be handled more directly.
Use the appropriate operand (of 1st or 2nd operand) for error
reporting (position and type), rather than always using the
first operand.
Use an extra parameter to indicate a switch case
comparison; in this case the error is always reported at
the position of the first operand. (The error messages are
not yet adjusted for switches; see next CL.)
Introduce a new kindString function which is used to print simplified
types in error messages (related to comparisons only): instead of
printing the details of a struct type, we just print "struct" where
the details are not relevant. This matches the 1.17 compiler behavior.
Added a "reportf" parameter to the internal comparable function so we
can report an error cause in addition to the boolean result. Rather
than passing a *string for cause, we pass a function to record the
cause so that we can use the *Checker context for printing (needed
for proper type qualification). This mechanism reports the same
details now as the 1.17 compiler.
Adjusted various tests as needed added new test files.
Fixes#50918.
Change-Id: I1f0e7af22f09db4d31679c667c71a9038a8dc9d2
Reviewed-on: https://go-review.googlesource.com/c/go/+/381964
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This makes the error case pointed out in the issue like the current
message in Go 1.17 or -G=0 mode. The priority is to point out the
similar but wrong method name, rather than a difference in type.
Made changes to both cmd/compile/internal/types2 and go/types.
Added in a missing tab in an error message in go/types.
At the same time, removed the extra "at info" on the have lines (and
pointer receiver lines) of error messages, as requested in #50907.
Fixes#50816Fixes#50907
Change-Id: I04f8151955bdb6192246cbcb59adc1c4b8a2c4e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/381774
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
These can go wrong when one of the operands is the minimum integer value.
Fixes#50854.
Change-Id: I238fe284f60c7ee5aeb9dc9a18e8b1578cdb77d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/381318
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Slightly better for cases such as string(1 << s).
Leaves type-checker tests alone for now because
there are multiple dozens.
For #45117.
Change-Id: I47b314c713fabe424c2158674bf965416a8a6f5c
Reviewed-on: https://go-review.googlesource.com/c/go/+/379274
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
For an extension operation like MOWWreg, if the operand is already
extended, we optimize the second extension out. Usually a LoadReg
of a proper type would come already extended, as a MOVW/MOVWU etc.
instruction does. But for a LoadReg to a floating point register,
the instruction does not do the extension. So we cannot elide the
extension.
Fixes#50671.
Change-Id: Id8991df78d5acdecd3fd6138c558428cbd5f6ba3
Reviewed-on: https://go-review.googlesource.com/c/go/+/379236
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Currently the code handles the case of returning values from
a function with no result parameters as a special case.
Consider this input:
package p
func f0_2() { return 1, 2 }
func f0_1() { return 1 }
func f1_0() int { return }
func f1_2() int { return 1, 2 }
func f2_0() (int, int) { return }
func f2_1() (int, int) { return 1 }
The errors are:
x.go:3:33: no result values expected <<<
x.go:4:33: no result values expected <<<
x.go:5:26: not enough return values
have ()
want (int)
x.go:6:36: too many return values
have (number, number)
want (int)
x.go:7:26: not enough return values
have ()
want (int, int)
x.go:8:33: not enough return values
have (number)
want (int, int)
There are two problems with the current special case emitting the
errors on the marked line:
1. It calls them 'result values' instead of 'return values'.
2. It doesn't show the type being returned, which can be useful to programmers.
Using the general case solves both these problems,
so this CL removes the special case and calls the general case instead.
Now those two errors read:
x.go:3:33: too many return values
have (number, number)
want ()
x.go:4:33: too many return values
have (number)
want ()
Fixes#50653.
Change-Id: If6b47dcece14ed4febb3a2d3d78270d5be1cb24d
Reviewed-on: https://go-review.googlesource.com/c/go/+/379116
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Using type aliases, it's possible to create structs with embedded
fields that have no corresponding type literal notation. However, we
still need to generate a unique name for these types to use for linker
symbols. This CL introduces a new "struct{ Name = Type }" syntax for
use in LinkString formatting to represent these types.
Reattempt at CL 372914, which was rolled back due to race-y
LocalPkg.Lookup call that isn't safe for concurrency.
Fixes#50190.
Change-Id: I0b7fd81e1b0b3199a6afcffde96ade42495ad8d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/378434
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
With this change, we shall now see:
*myS does not implement S (wrong type for DoSomething method)
have DoSomething() (string, error) at ./main.go:9:14
want DoSomething() (int, error)
instead of previously:
*myS does not implement S (wrong type for DoSomething method)
have DoSomething() (string, error)
want DoSomething() (int, error)
Fixes#42841Fixes#45813
Change-Id: I66990929e39b0d36f2e91da0d92f60586a9b84e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/373634
Trust: Robert Findley <rfindley@google.com>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
For some reason, aix sometimes executes the bogus function body. This
should never happen as it lives in a no-execute section. It might be
a transient permission blip as the heap grows.
Add a small function to cleanup and synchronize the icache before
jumping to the bogus function to ensure it causes a panic, not SIGILL.
Fixes#44583
Change-Id: Iadca62d82bfb70fc62088705dac42a880a1208fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/377314
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
I made the default be that, where there are differences between types2
and -G=0 error messages, we want errorcheck tests to pass types2.
Typically, we can get errorcheck to pass on types2 and -G=0 if they give
the same number of error messages on the same lines, just different
wording. If they give a different number of error messages, then I made
types2 pass. I added an exception list for -G=0 to cover those cases
where -G=0 and types give different numbers of error messages.
Because types2 does not run if there are syntax errors, for several
tests, I had to split the tests into two parts in order to get all the
indicated errors to be reported in types2 (bug228.go, bug388.go,
issue11610.go, issue14520.go)
I tried to preserve the GCCGO labeling correctly (but may have gotten
some wrong). When types2 now matches where a GCCGO error previously
occurred, I transformed GCCGO_ERROR -> ERROR. When types2 no longer
reports an error in a certain place, I transformed ERROR -> GCCGO_ERROR.
When types2 reports an error in a new place, I used GC_ERROR.
The remaining entries in types2Failures are things that I think we
probably still need to fix - either actually missing errors in types2,
or cases where types2 gives worse errors than -G=0.
Change-Id: I7f01e82b322b16094096b67d7ed2bb39b410c34f
Reviewed-on: https://go-review.googlesource.com/c/go/+/372854
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
- detect *interface case and report specific error
- replaced switch with sequence of if's for more clarity
- fixed isInterfacePtr: it applies to all interfaces, incl.
type parameters
- reviewed/fixed all uses of isInterfacePtr
- adjusted error messages to be consistently of the format
"type %s is pointer to interface, not interface"
Fixes#48312.
Change-Id: Ic3c8cfcf93ad57ecdb60f6a727cce9e1aa4afb5d
Reviewed-on: https://go-review.googlesource.com/c/go/+/376914
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Using type aliases, it's possible to create structs with embedded
fields that have no corresponding type literal notation. However, we
still need to generate a unique name for these types to use for linker
symbols. This CL introduces a new "struct{ Name = Type }" syntax for
use in LinkString formatting to represent these types.
Fixes#50190.
Change-Id: I025ceb09a86e00b7583d3b9885d612f5d6cb44fe
Reviewed-on: https://go-review.googlesource.com/c/go/+/372914
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
types2 allows the conversion of a slice of a user-defined byte type B
(not builtin uint8 or byte) to string. But runtime.slicebytetostring
requires a []byte argument, so add in a CONVNOP from []B to []byte if
needed. Same for the conversion of a slice of user-defined rune types to
string.
I made the same change in the transformations of the old typechecker, so
as to keep tcConv() and transformConv() in sync. That fixes the bug for
-G=0 mode as well.
Fixes#23536
Change-Id: Ic79364427f27489187f3f8015bdfbf0769a70d69
Reviewed-on: https://go-review.googlesource.com/c/go/+/376056
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
For #50439
Change-Id: Ifad6e6f8de42121c695b5a4dc56e0f6606e2917e
Reviewed-on: https://go-review.googlesource.com/c/go/+/375796
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Trust: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
The builtin "any" type should only be identical to an unnamed empty
interface type, not a defined empty interface type.
Fixes#50169.
Change-Id: Ie5bb88868497cb795de1fd0276133ba9812edfe4
Reviewed-on: https://go-review.googlesource.com/c/go/+/372217
Trust: Cherry Mui <cherryyz@google.com>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Enable a bunch of types2-related error tests to run successfully, so
they no longer have to be disabled in run.go.
- directive.go: split it into directive.go and directive2.go, since the
possible errors are now split across the parser and noder2, so they
can't all be reported in one file.
- linkname2.go: similarly, split it into linkname2.go and linkname3.go
for the same reason.
- issue16428.go, issue17645.go, issue47201.dir/bo.go: handle slightly
different wording by types2
- issue5609.go: handle slight different error (array length must be
integer vs. array bound too large).
- float_lit3.go: handle slightly different wording (overflows
float vs cannot convert to float)
I purposely didn't try to fix tests yet where there are extra or missing
errors on different lines, since that is not easy to make work for both
-G=3 and -G=0. In a later change, will flip to make the types2 version
match correctly, vs. the -G=0 version.
Change-Id: I6079ff258e3b90146335b9995764e3b1b56cda59
Reviewed-on: https://go-review.googlesource.com/c/go/+/368455
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
First, we need to set base.Pos in varDecl() and typeDecl(), so it will
be correct if we need to report type size errors while converting types.
Changed error calls in types/sizes.go to use Errorf, not ErrorfAt, since
we want to use base.Pos (which will set from t.Pos(), if that is
available).
Second, we need to add an extra call CalcSize(t1.Elem()) in the
TCHANARGS case of CalcSize(). We can use CalcSize() rather than
CheckSize(), since we know the top-level recursive type will have been
calculated by the time we process the fake TCHANARGS type. In -G=0 mode,
the size of the channel element has often been calculated because of
some other processing (but not in the case of #49767). But in -G=3 mode,
we just calculate sizes during the single noder2 pass, so we are more
likely to have not gotten to calculating the size of the element yet,
depending on the order of processing of the deferredTypeStack.
Fixes the tests fixedbugs/issue{42058a,42058b}.go that were
disabled for -G=3 mode.
Had to add exceptions in stdlib_test.go for go/types and types2, because
the types2 typechecker does not know about type size limits.
Fixes#49814Fixes#49771
Updates #49767
Change-Id: I77d058e8ceff68a58c4c386a8cf46799c54b04c3
Reviewed-on: https://go-review.googlesource.com/c/go/+/367955
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Thanks to emmanuel@orijtech.com who wrote the initial version of
this change (CL 354490).
This change is following CL 354490 in idea but also contains various
simplifications, slightly improved printing of signature/type patterns,
adjustments for types2, and some fine-tuning of error positions.
Also adjusted several ERROR regexp patterns.
Fixes#48834.
Fixes#48835.
Change-Id: I31cf20c81753b1dc84836dbe83a39030ceb9db23
Reviewed-on: https://go-review.googlesource.com/c/go/+/364874
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
When we have a typed nil, we already say so; thus it is sufficient
to use "nil" in all the other cases.
This is closer to (1.17) compiler behavior. In cases where the
1.17 compiler prints "untyped nil" (e.g., wrong uses of "copy"),
we already print a different message. We can do better in those
cases as well; will be addressed in a separate CL (see #49735).
Fixes#48852.
Change-Id: I9a7a72e0f99185b00f80040c5510a693b1ea80f6
Reviewed-on: https://go-review.googlesource.com/c/go/+/366276
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
For -G=3 for test using 'any'.
Change-Id: Ia37ee944a38be4f4330e62ad187f10f2d42e41bd
Reviewed-on: https://go-review.googlesource.com/c/go/+/365839
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
`types.Types[types.TINTER]` is already used for `interface{}`, so we
can conveniently just extend the existing logic that substitutes
`byte` and `rune` with `uint8` and `int32` to also substitute `any`.
Fixes#49665.
Change-Id: I1ab1954699934150aab899b35037d5611c8ca47e
Reviewed-on: https://go-review.googlesource.com/c/go/+/365354
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Use actual unmapped memory instead of small integers to make
pointers that will fault when accessed.
Fixes#49562
Change-Id: I2c60c97cf80494dd962a07d10cfeaff6a00f4f8e
Reviewed-on: https://go-review.googlesource.com/c/go/+/364914
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
