Merge push_parser and pop_parser into a single parse_import function
and inline unimportfile. Shake out function boundaries a little bit so
that the symmetry is readily visible.
Move the import_package call into parse_import (and inline
import_there into import_package). This means importfile no longer
needs to provide fake import data to be needlessly lexed/parsed every
time it's called.
Also, instead of indicating import success/failure by whether the next
token is "package", import_spec can just check whether importpkg is
non-nil.
Tangentially, this somehow alters the diagnostics produced for
test/fixedbugs/issue11610.go. However, the new diagnostics are more
consistent with those produced when the empty import statement is
absent, which seems more desirable than maintaining the previous
errors.
Change-Id: I5cd1c22aa14da8a743ef569ff084711d137279d5
Reviewed-on: https://go-review.googlesource.com/19650
Reviewed-by: Robert Griesemer <gri@golang.org>
Walking the field name as if it were an expression
caused a called to haspointers with a TFIELD, which panics.
Trigger was a field at a large offset within a large struct,
combined with a struct literal expression mentioning that
field.
Fixes#14405
Change-Id: I4589badae27cf3d7cf365f3a66c13447512f41f9
Reviewed-on: https://go-review.googlesource.com/19699
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The Go 1.6 release notes say we'll remove the “-X name value” form
(in favor of the “-X name=value” form) in Go 1.7.
Do that.
Also establish the doc/go1.7.txt file.
Change-Id: Ie4565a6bc5dbcf155181754d8d92bfbb23c75338
Reviewed-on: https://go-review.googlesource.com/19614
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This bug was introduced in golang.org/cl/18217,
while trying to fix#13777.
Originally I wanted to just disable inlining for the case
being handled incorrectly, but it's fairly difficult to detect
and much easier just to fix. Since the case being handled
incorrectly was inlined correctly in Go 1.5, not inlining it
would also be somewhat of a regression.
So just fix it.
Test case copied from Ian's CL 19520.
The mistake to worry about in this CL would be relaxing
the condition too much (we now print the note more often
than we did yesterday). To confirm that we'd catch this mistake,
I checked that changing (!fmtbody || !t.Funarg) to (true) does
cause fixedbugs/issue13777.go to fail. And putting it back
to what is written in this CL makes that test pass again
as well as the new fixedbugs/issue14331.go.
So I believe that the new condition is correct for both constraints.
Fixes#14331.
Change-Id: I91f75a4d5d07c53af5caea1855c780d9874b8df6
Reviewed-on: https://go-review.googlesource.com/19514
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Type switches need write barriers if the written-to
variable is heap allocated.
For the added needwritebarrier call, the right arg doesn't
really matter, I just pass something that will never disqualify
the write barrier. The left arg is the one that matters.
Fixes#14306
Change-Id: Ic2754167cce062064ea2eeac2944ea4f77cc9c3b
Reviewed-on: https://go-review.googlesource.com/19481
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Consider this code:
func f(*int)
func g() {
p := new(int)
f(p)
}
where f is an assembly function.
In general liveness analysis assumes that during the call to f, p is dead
in this frame. If f has retained p, p will be found alive in f's frame and keep
the new(int) from being garbage collected. This is all correct and works.
We use the Go func declaration for f to give the assembly function
liveness information (the arguments are assumed live for the entire call).
Now consider this code:
func h1() {
p := new(int)
syscall.Syscall(1, 2, 3, uintptr(unsafe.Pointer(p)))
}
Here syscall.Syscall is taking the place of f, but because its arguments
are uintptr, the liveness analysis and the garbage collector ignore them.
Since p is no longer live in h once the call starts, if the garbage collector
scans the stack while the system call is blocked, it will find no reference
to the new(int) and reclaim it. If the kernel is going to write to *p once
the call finishes, reclaiming the memory is a mistake.
We can't change the arguments or the liveness information for
syscall.Syscall itself, both for compatibility and because sometimes the
arguments really are integers, and the garbage collector will get quite upset
if it finds an integer where it expects a pointer. The problem is that
these arguments are fundamentally untyped.
The solution we have taken in the syscall package's wrappers in past
releases is to insert a call to a dummy function named "use", to make
it look like the argument is live during the call to syscall.Syscall:
func h2() {
p := new(int)
syscall.Syscall(1, 2, 3, uintptr(unsafe.Pointer(p)))
use(unsafe.Pointer(p))
}
Keeping p alive during the call means that if the garbage collector
scans the stack during the system call now, it will find the reference to p.
Unfortunately, this approach is not available to users outside syscall,
because 'use' is unexported, and people also have to realize they need
to use it and do so. There is much existing code using syscall.Syscall
without a 'use'-like function. That code will fail very occasionally in
mysterious ways (see #13372).
This CL fixes all that existing code by making the compiler do the right
thing automatically, without any code modifications. That is, it takes h1
above, which is incorrect code today, and makes it correct code.
Specifically, if the compiler sees a foreign func definition (one
without a body) that has uintptr arguments, it marks those arguments
as "unsafe uintptrs". If it later sees the function being called
with uintptr(unsafe.Pointer(x)) as an argument, it arranges to mark x
as having escaped, and it makes sure to hold x in a live temporary
variable until the call returns, so that the garbage collector cannot
reclaim whatever heap memory x points to.
For now I am leaving the explicit calls to use in package syscall,
but they can be removed early in a future cycle (likely Go 1.7).
The rule has no effect on escape analysis, only on liveness analysis.
Fixes#13372.
Change-Id: I2addb83f70d08db08c64d394f9d06ff0a063c500
Reviewed-on: https://go-review.googlesource.com/18584
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Brief background on "why heap allocate". Things can be
forced to the heap for the following reasons:
1) address published, hence lifetime unknown.
2) size unknown/too large, cannot be stack allocated
3) multiplicity unknown/too large, cannot be stack allocated
4) reachable from heap (not necessarily published)
The bug here is a case of failing to enforce 4) when an
object Y was reachable from a heap allocation X forced
because of 3). It was found in the case of a closure
allocated within a loop (X) and assigned to a variable
outside the loop (multiplicity unknown) where the closure
also captured a map (Y) declared outside the loop (reachable
from heap). Note the variable declared outside the loop (Y)
is not published, has known size, and known multiplicity
(one). The only reason for heap allocation is that it was
reached from a heap allocated item (X), but because that was
not forced by publication, it has to be tracked by loop
level, but escape-loop level was not tracked and thus a bug
results.
The fix is that when a heap allocation is newly discovered,
use its looplevel as the minimum loop level for downstream
escape flooding.
Every attempt to generalize this bug to X-in-loop-
references-Y-outside loop succeeded, so the fix was aimed
to be general. Anywhere that loop level forces heap
allocation, the loop level is tracked. This is not yet
tested for all possible X and Y, but it is correctness-
conservative and because it caused only one trivial
regression in the escape tests, it is probably also
performance-conservative.
The new test checks the following:
1) in the map case, that if fn escapes, so does the map.
2) in the map case, if fn does not escape, neither does the map.
3) in the &x case, that if fn escapes, so does &x.
4) in the &x case, if fn does not escape, neither does &x.
Fixes#13799.
Change-Id: Ie280bef2bb86ec869c7c206789d0b68f080c3fdb
Reviewed-on: https://go-review.googlesource.com/18234
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Adding the evconst(n) call for OANDAND and OOROR in
golang.org/cl/18262 was originally just to parallel the above iscmp
branch, but upon further inspection it seemed odd that removing it
caused test/fixedbugs/issue6671.go's
var b mybool
// ...
b = bool(true) && true // ERROR "cannot use"
to start failing (i.e., by not emitting the expected "cannot use"
error).
The problem is that evconst(n)'s settrue and setfalse paths always
reset n.Type to idealbool, even for logical operators where n.Type
should preserve the operand type. Adding the evconst(n) call for
OANDAND/OOROR inadvertantly worked around this by turning the later
evconst(n) call at line 2167 into a noop, so the "n.Type = t"
assignment at line 739 would preserve the operand type.
However, that means evconst(n) was still clobbering n.Type for ONOT,
so declarations like:
const _ bool = !mybool(true)
were erroneously accepted.
Update #13821.
Change-Id: I18e37287f05398fdaeecc0f0d23984e244f025da
Reviewed-on: https://go-review.googlesource.com/18362
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
We don't use these for benchmarking anymore.
Now we have the go1 dir and the benchmarks subrepo.
Some have problematic copyright notices, so move out of main repo.
Preserved in golang.org/x/exp/shootout.
Fixes#12688.
Fixes#13584.
Change-Id: Ic0b71191ca1a286d33d7813aca94bab1617a1c82
Reviewed-on: https://go-review.googlesource.com/18320
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Added a format option to inhibit output of .Note field in
printing, and enabled that option during export.
Added test.
Fixes#13777.
Change-Id: I739f9785eb040f2fecbeb96d5a9ceb8c1ca0f772
Reviewed-on: https://go-review.googlesource.com/18217
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
The test for non-package main top-level inputs is done while parsing
the export data. Issue #13468 happened because we were not parsing
the export data when using compiler-generated archives
(that is, when using go tool compile -pack).
Fix this by parsing the export data even for archives.
However, that turns up a different problem: the export data check
reports (one assumes spurious) skew errors now, because it has
not been run since Go 1.2.
(Go 1.3 was the first release to use go tool compile -pack.)
Since the code hasn't run since Go 1.2, it can't be that important.
Since it doesn't work today, just delete it.
Figuring out how to make this code work with Robert's export
format was one of the largest remaining TODOs for that format.
Now we don't have to.
Fixes#13468 and makes the world a better place.
Change-Id: I40a4b284cf140d49d48b714bd80762d6889acdb9
Reviewed-on: https://go-review.googlesource.com/17976
Reviewed-by: Robert Griesemer <gri@golang.org>
Fixes#12411.
Change-Id: I2202a754c7750e3b2119e3744362c98ca0d2433e
Reviewed-on: https://go-review.googlesource.com/17818
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Another (historic) artifact due to partially resolving symbols too early.
Fixes#13539.
Change-Id: Ie720c491cfa399599454f384b3a9735e75d4e8f1
Reviewed-on: https://go-review.googlesource.com/17600
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Following an empty import, a declaration involving a ? symbol
generates an internal compiler error when the name of the
symbol (in newname function).
package a
import""
var?
go.go:2: import path is empty
go.go:3: internal compiler error: newname nil
Make sure dclname is not called when the symbol is nil.
The error message is now:
go.go:2: import path is empty
go.go:3: invalid declaration
go.go:4: syntax error: unexpected EOF
This CL was initially meant to be applied to the old parser,
and has been updated to apply to the new parser.
Fixes#11610
Change-Id: I75e07622fb3af1d104e3a38c89d9e128e3b94522
Reviewed-on: https://go-review.googlesource.com/15268
Reviewed-by: Russ Cox <rsc@golang.org>
The following code:
func n() {(interface{int})}
generates:
3: interface contains embedded non-interface int
3: type %!v(PANIC=runtime error: invalid memory address or nil pointer dereference) is not an expression
It is because the corresponding symbol (Sym field in Type object)
is nil, resulting in a panic in typefmt.
Just skip the symbol if it is nil, so that the error message becomes:
3: interface contains embedded non-interface int
3: type interface { int } is not an expression
Fixes#11614
Change-Id: I219ae7eb01edca264fad1d4a1bd261d026294b00
Reviewed-on: https://go-review.googlesource.com/14015
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
The build tags are necessary to keep "go build" in that directory
building only stdio.go, but we have to arrange for test/run.go to
treat them as satisfied.
Fixes#12625.
Change-Id: Iec0cb2fdc2c9b24a4e0530be25e940aa0cc9552e
Reviewed-on: https://go-review.googlesource.com/17454
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Move test for isblank into addmethod so that most of the type checking
for methods is also performed for blank methods.
Fixes#11366.
Change-Id: I13d554723bf96d906d0b3ff390d7b7c87c1a5020
Reviewed-on: https://go-review.googlesource.com/16866
Reviewed-by: Robert Griesemer <gri@golang.org>
- use same local variable name (lno) for line number for LCOLAS everywhere
- remove now unneeded assignment of line number to yylval.i in lexer
Fix per suggestion of mdempsky.
Fixes#13415.
Change-Id: Ie3c7f5681615042a12b81b26724b3a5d8a979c25
Reviewed-on: https://go-review.googlesource.com/17248
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is a bit ugly but it's a useful test. Run go install -buildmode=shared std
and then go run run.go -linkshared (it passes on linux/amd64).
Change-Id: I5684c79cd03817fa1fc399788b7320f8535c08da
Reviewed-on: https://go-review.googlesource.com/16343
Reviewed-by: Russ Cox <rsc@golang.org>
- fix/check location of popdcl calls where questioned
- remove unnecessary handling of ... (LDDD) in ntype (couldn't be reached)
- inlined and fnret_type and simplified fnres as a consequence
- leave handling of ... (LDDD) in arg_list alone (remove TODO)
- verify that parser requires a ';' after last statement in a case/default
(added test case)
Fixes#13243.
Change-Id: Iad94b498591a5e85f4cb15bbc01e8e101415560d
Reviewed-on: https://go-review.googlesource.com/17155
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Chris Manghane <cmang@golang.org>
Use a combination of follow- and stop-token lists and nesting levels
to better synchronize parser after a syntax error.
Fixes#13319.
Change-Id: I9592e0b5b3ba782fb9f9315fea16163328e204f7
Reviewed-on: https://go-review.googlesource.com/17080
Reviewed-by: Chris Manghane <cmang@golang.org>
Handling of &(T{}) assumed that the parser would not introduce ()'s.
Also: Better comments around handling of OPAREN syntax tree optimization.
Fixes#13261.
Change-Id: Ifc5047a0448f5e7d74cd42f6608b87dcc9c2f2fb
Reviewed-on: https://go-review.googlesource.com/17040
Reviewed-by: Chris Manghane <cmang@golang.org>
Also:
- better error messages in some cases
- factored out function to produce syntax error at given line number
Fixes#13273.
Change-Id: I0192a94731cc23444680a26bd0656ef663e6da0b
Reviewed-on: https://go-review.googlesource.com/16992
Reviewed-by: Chris Manghane <cmang@golang.org>
