Fixes#13881.
Change-Id: Idff77db381640184ddd2b65022133bb226168800
Reviewed-on: https://go-review.googlesource.com/18449
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Currently, due to an oversight, we only balance work buffers
in background and idle workers and not in assists. As a
result, in assist-heavy workloads, assists are likely to tie
up large work buffers in per-P caches increasing the
likelihood that the global list will be empty. This increases
the likelihood that other GC workers will exit and assists
will block, slowing down the system as a whole. Fix this by
eagerly balancing work buffers as soon as the assists notice
that the global buffers are empty. This makes it much more
likely that work will be immediately available to other
workers and assists.
This change reduces the garbage benchmark time by 39% and
fixes the regresssion seen at CL 15893 golang.org/cl/15893.
Garbage benchmark times before and after this CL.
Before GOPERF-METRIC:time=4427020
After GOPERF-METRIC:time=2721645
Fixes#13827
Change-Id: I9cb531fb873bab4b69ce9c1617e30df6c49cdcfe
Reviewed-on: https://go-review.googlesource.com/18341
Reviewed-by: Austin Clements <austin@google.com>
The AESNI GCM code decrypts and authenticates concurrently and so
overwrites the destination buffer even in the case of an authentication
failure.
This change updates the documentation to make that clear and also
mimics that behaviour in the generic code so that different platforms
act identically.
Fixes#13886
Change-Id: Idc54e51f01e27b0fc60c1745d50bb4c099d37e94
Reviewed-on: https://go-review.googlesource.com/18480
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
mips64 builder and one machine of the mips64le builder has small amount
of memory. Since CL 18199, they have been running slowly, as more
processes were launched in running 'test' directory, and a lot of swap
were used. This CL brings all.bash from 5h back to 3h on Loongson 2E
with 512 MB memory.
Change-Id: I4a22e239a542a99ba5986753205d8cd1f4b3d3c6
Reviewed-on: https://go-review.googlesource.com/18483
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Updates http2 to x/net git rev 0e6d34ef942 for https://golang.org/cl/18472
which means we'll get to delete a ton of grpc-go code and just use the
standard library's HTTP client instead.
Also, the comments in this CL aren't entirely accurate it turns out.
RFC 2616 says:
"The Trailer header field can be used to indicate which header fields
are included in a trailer (see section 14.40)."
And 14.40:
" An HTTP/1.1 message SHOULD include a Trailer header field in a
message using chunked transfer-coding with a non-empty trailer. Doing
so allows the recipient to know which header fields to expect in the
trailer.
If no Trailer header field is present, the trailer SHOULD NOT include
any header fields. See section 3.6.1 for restrictions on the use of
trailer fields in a "chunked" transfer-coding."
So it's really a SHOULD more than a MUST.
And gRPC (at least Google's server) doesn't predeclare "grpc-status"
ahead of time in a Trailer Header, so we'll be lenient. We were too
strict anyway. It's also not a concern for the Go client we have a
different place to populate the Trailers, and it won't confuse clients
which aren't looking for them. The ResponseWriter server side is more
complicated (and strict), though, since we don't want to widen the
ResponseWriter interface. So the Go server still requires that you
predeclare Trailers.
Change-Id: Ia2defc11a2469fb8570ecfabb8453537121084eb
Reviewed-on: https://go-review.googlesource.com/18473
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The previous behaviour of installing the signal handlers in a separate
thread meant that Go initialization raced with non-Go initialization if
the non-Go initialization also wanted to install signal handlers. Make
installing signal handlers synchronous so that the process-wide behavior
is predictable.
Update #9896.
Change-Id: Ice24299877ec46f8518b072a381932d273096a32
Reviewed-on: https://go-review.googlesource.com/18150
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Go 1.6 simplified the GC phases. The "synchronize Ps" phase no longer
exists and "root scan" and "mark" phases have been combined.
Update the gctrace line implementation and documentation to remove the
unused phases.
Fixes#13536.
Change-Id: I4fc37a3ce1ae3a99d48c0be2df64cbda3e05dee6
Reviewed-on: https://go-review.googlesource.com/18458
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Sigh. Sleeps on FreeBSD also yield the rest of the time slice and
profiling signals are only delivered when a process completes a time
slice (worse, itimer time is only accounted to the process that
completes a time slice). It's less noticeable than the other BSDs
because the default tick rate is 1000Hz, but it's still failing
regularly.
Fixes#13846.
Change-Id: I41bf116bffe46682433b677183f86944d0944ed4
Reviewed-on: https://go-review.googlesource.com/18455
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
There are fewer special cases this way: the import map applies
to all import paths, not just the ones not spelled "unsafe".
This is also consistent with what the code in cmd/go and go/build expects.
They make no exception for "unsafe".
For #13703.
Change-Id: I622295261ca35a6c1e83e8508d363bddbddb6c0a
Reviewed-on: https://go-review.googlesource.com/18438
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Third time's a charm.
Thanks to Ralph Corderoy for noticing the DEL omission.
Update #11207
Change-Id: I174fd01eaecceae1eb220f2c9136e12d40fbe943
Reviewed-on: https://go-review.googlesource.com/18375
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Looking for vendor directories is a better default.
Fixes#13772
Change-Id: Iabbaea71ccc67b72f14f1f412dc8ab70cb41996d
Reviewed-on: https://go-review.googlesource.com/18450
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
We're only getting away with it today by luck.
Change-Id: I24d1cceee4d20c5181ca64fceda152e875f6ad81
Reviewed-on: https://go-review.googlesource.com/18440
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The cgoTestSO test currently fails when run on FreeBSD amd64 with
GOHOSTARCH=386. This is due to it failing to find the shared object.
On FreeBSD 64-bit architectures, the linker for 32-bit objects
looks for a separate environment variable. Export both LD_LIBRARY_PATH
and LD_32_LIBRARY_PATH on FreeBSD when GOHOSTARCH=386.
Update issue #13873.
Change-Id: I1fb20dd04eb2007061768b2e4530886521813d42
Reviewed-on: https://go-review.googlesource.com/18420
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reading 32,767 is too many on some versions of Windows.
The exact upper bound is unclear.
For #13697, but may not fix the problem on all systems.
Change-Id: I197021ed60cbcd33c91ca6ceed456ec3d5a6c9d6
Reviewed-on: https://go-review.googlesource.com/18433
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In the past, `a.*?c|a.*?b` was factored to `a.*?[bc]`. Thus, given
"abc" as its input string, the automaton would consume "ab" and
then stop (when unanchored) whereas it should consume all of "abc"
as per leftmost semantics.
Fixes#13812.
Change-Id: I67ac0a353d7793b3d0c9c4aaf22d157621dfe784
Reviewed-on: https://go-review.googlesource.com/18357
Reviewed-by: Russ Cox <rsc@golang.org>
Ads documentation for both formats of messages accepted by
ReadResponse(). Validity of message should not be altered by
the validation process. On message with unexpected code,
a properly formatted message was not fully read.
Fixes#10230
Change-Id: Ic0b473059a68ab624ce0525e359d0f5d0b8d2117
Reviewed-on: https://go-review.googlesource.com/18172
Reviewed-by: Russ Cox <rsc@golang.org>
Previously it depended on whether we were using the Go resolver or the Cgo resolver.
Fixes#12421.
Change-Id: Ib162e336f30f736d7244e29d96651c3be11fc3cd
Reviewed-on: https://go-review.googlesource.com/18383
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
CL 4310 introduced these functions, but their
implementation does not match with their published
documentation. Correct the implementation.
Change-Id: I285e41f9c7c5fc4e550ff59b0adb8b2bcbf6737a
Reviewed-on: https://go-review.googlesource.com/17997
Reviewed-by: Yasuhiro MATSUMOTO <mattn.jp@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>
For #13677, but there is more to do.
Change-Id: Id1af999dc972d07cdfc771e5855a1a7dca47ca96
Reviewed-on: https://go-review.googlesource.com/18046
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Today, signal.Ignore(syscall.SIGTRAP) does nothing
while signal.Notify(make(chan os.Signal), syscall.SIGTRAP)
correctly discards user-generated SIGTRAPs.
The same applies to any signal that we throw on.
Make signal.Ignore work for these signals.
Fixes#12906.
Change-Id: Iba244813051e0ce23fa32fbad3e3fa596a941094
Reviewed-on: https://go-review.googlesource.com/18348
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
OS X unconditionally sets si_code = TRAP_BRKPT when sending SIGTRAP,
even if it was generated by kill -TRAP and not a breakpoint.
Correct the si_code by looking to see if the PC is after a breakpoint.
For #12906.
Change-Id: I998c2499f7f12b338e607282a325b045f1f4f690
Reviewed-on: https://go-review.googlesource.com/18347
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Before, NumGoroutine counted system goroutines and Stack (usually) didn't show them,
which was inconsistent and confusing.
To resolve which way they should be consistent, it seems like
package main
import "runtime"
func main() { println(runtime.NumGoroutine()) }
should print 1 regardless of internal runtime details. Make it so.
Fixes#11706.
Change-Id: I6bfe26a901de517728192cfb26a5568c4ef4fe47
Reviewed-on: https://go-review.googlesource.com/18343
Reviewed-by: Austin Clements <austin@google.com>
Based on comments from Thomas Bushnell.
Update #9896.
Change-Id: I603b1382d17dff00b5d18f17f8b5d011503e9e4c
Reviewed-on: https://go-review.googlesource.com/18365
Reviewed-by: Russ Cox <rsc@golang.org>
Rename should remove newname if the file already exists
and is not a directory.
Fixes#13844.
Change-Id: I85a5cc28e8d161637a8bc1de33f4a637d9154cd1
Reviewed-on: https://go-review.googlesource.com/18291
Reviewed-by: Russ Cox <rsc@golang.org>
Add Colin Cross (Google CLA)
Add Quentin Perez (Individual CLA)
Add Andy Balholm (Individual CLA)
Add Dirk Gadsden (Individual CLA)
Add Derek Che (Yahoo CLA)
And:
Add CL Sung (Individual CLA), but where gerrit is using personal email
address with CLA signed, but the git commit itself is using an
unverified htc.com address. The commit is:
https://github.com/golang/oauth2/commit/099e4f0
For github user https://github.com/clsung which says "Self-Employed"
and "clsung@gmail.com". Perhaps the self-employed part is new
since Sep 10, 2014.
Change-Id: Ic1130fb79d167259a9bb76e3be56b9c8ad6b95ca
Reviewed-on: https://go-review.googlesource.com/18369
Reviewed-by: Ian Lance Taylor <iant@golang.org>
As Andy Balholm noted in #11207:
"RFC2616 §4.2 says that a header's field-content can consist of *TEXT,
and RFC2616 §2.2 says that TEXT is <any OCTET except CTLs, but
including LWS>, so that would mean that bytes greater than 128 are
allowed."
This is a partial rollback of the strictness from
https://golang.org/cl/11207 (added in the Go 1.6 dev cycle, only
released in Go 1.6beta1)
Fixes#11207
Change-Id: I3a752a7941de100e4803ff16a5d626d5cfec4f03
Reviewed-on: https://go-review.googlesource.com/18374
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
It's fairly common to call cgo functions with conversions to
unsafe.Pointer or other C types. Apply the simpler checking of address
expressions when possible when the address expression occurs within a
type conversion.
Change-Id: I5187d4eb4d27a6542621c396cad9ee4b8647d1cd
Reviewed-on: https://go-review.googlesource.com/18391
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Go 1.5 and earlier said "day out of range".
As part of working on this code it morphed into "day of month out of range".
To avoid churn in the output restore the old text.
This fixes some tests reported privately.
Change-Id: If179676cd49f9a471a9441fec2f5220c85eb0799
Reviewed-on: https://go-review.googlesource.com/18386
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Document the three GODEBUG environment variables in the package doc.
Updates the bundled http2 to x/net git rev 415f1917
for https://golang.org/cl/18372.
Fixes#13611
Change-Id: I3116c5d7de70d3d15242d7198f3758b1fb7d94b9
Reviewed-on: https://go-review.googlesource.com/18373
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I thought there was still work to do in http2 for this, but I guess
not: the work for parsing them is in net/url (used by http2) and the
handling of OPTIONS * is already in net/http serverHandler, also used
by http2.
But keep the tests.
Change-Id: I566dd0a03cf13c9ea8e735c6bd32d2c521ed503b
Reviewed-on: https://go-review.googlesource.com/18368
Reviewed-by: Blake Mizerany <blake.mizerany@gmail.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Adding the evconst(n) call for OANDAND and OOROR in
golang.org/cl/18262 was originally just to parallel the above iscmp
branch, but upon further inspection it seemed odd that removing it
caused test/fixedbugs/issue6671.go's
var b mybool
// ...
b = bool(true) && true // ERROR "cannot use"
to start failing (i.e., by not emitting the expected "cannot use"
error).
The problem is that evconst(n)'s settrue and setfalse paths always
reset n.Type to idealbool, even for logical operators where n.Type
should preserve the operand type. Adding the evconst(n) call for
OANDAND/OOROR inadvertantly worked around this by turning the later
evconst(n) call at line 2167 into a noop, so the "n.Type = t"
assignment at line 739 would preserve the operand type.
However, that means evconst(n) was still clobbering n.Type for ONOT,
so declarations like:
const _ bool = !mybool(true)
were erroneously accepted.
Update #13821.
Change-Id: I18e37287f05398fdaeecc0f0d23984e244f025da
Reviewed-on: https://go-review.googlesource.com/18362
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
