This test is flaky, and the cause is suspected to be an OpenBSD kernel bug.
Since there is no obvious workaround on the Go side, skip the test on
builders whose versions are known to be affected.
Fixes#17496
Change-Id: Ifa70061eb429e1d949f0fa8a9e25d177afc5c488
Reviewed-on: https://go-review.googlesource.com/c/go/+/222856
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
This change forces CFGs to take the full width of their column
and allows them to be as tall as necessary.
In my (recent) experience, this makes them far less likely to
be cropped, which makes them much more useful.
On rare occasions, this can lead to gigantic CFGs,
but if you've bothered to explicitly request a CFG,
this is still better than an irrevocably truncated CFG.
Change-Id: I9a649ea57fa3c2792998bb71331a2580e429b36a
Reviewed-on: https://go-review.googlesource.com/c/go/+/222618
Reviewed-by: Cherry Zhang <cherryyz@google.com>
In the open-code defer implementation, we add defer struct entries to the defer
chain on-the-fly at panic time to represent stack frames that contain open-coded
defers. This allows us to process non-open-coded and open-coded defers in the
correct order. Also, we need somewhere to be able to store the 'started' state of
open-coded defers. However, if a recover succeeds, defers will now be processed
inline again (unless another panic happens). Any defer entry representing a frame
with open-coded defers will become stale once we run the corresponding defers
inline and exit the associated stack frame. So, we need to remove all entries for
open-coded defers at recover time.
The current code was only removing the top-most open-coded defer from the defer
chain during recovery. However, with recursive functions that do repeated
panic-recover-repanic, multiple stale entries can accumulate on the chain. So, we
just adjust the loop to process the entire chain. Since this is at panic/recover
case, it is fine to scan through the entire chain (which should usually have few
elements in it, since most defers are open-coded).
The added test fails with a SEGV without the fix, because it tries to run a stale
open-code defer entry (and the stack has changed).
Fixes#37664.
Change-Id: I8e3da5d610b5e607411451b66881dea887f7484d
Reviewed-on: https://go-review.googlesource.com/c/go/+/222420
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Tighten up a testpoint that looks for the compile unit
DW_AT_go_package_name attribute. The linker code that injects this
attribute was accidentally broken on the dev.link branch, but in a way
that wasn't detected by the test (attr was generated, but always with
an empty string). The new test will fail if the attr is an empty
string, or if we can't find the attribute for the runtime package.
Change-Id: I8b065e7eb3486646364d0eaf48a73db6acffbd18
Reviewed-on: https://go-review.googlesource.com/c/go/+/218483
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
AIX, Solaris, and Illumos all appear to implement fcntl deadlock
detection at the granularity of processes. However, we are acquiring
and releasing file locks on individual goroutines running
concurrently: our locking occurs at a much finer granularity. As a
result, these platforms occasionally fail with EDEADLK errors, when
they detect locks that would be _misordered_ in a single-threaded
program but are safely _unordered_ in a multi-threaded context.
To work around the spurious errors, we treat EDEADLK as always
spurious, and retry the failing system call with a bounded exponential
backoff. This approach may introduce substantial latency since we no
longer benefit from kernel-scheduled wakeups in case of collisions,
but high-latency operations seem better than spurious failures.
Updates #33974
Updates #35618Fixes#32817
Change-Id: I58b2c6a0f143bce55d6460fd4ddc3db83577ada7
Reviewed-on: https://go-review.googlesource.com/c/go/+/222277
Reviewed-by: Jay Conrod <jayconrod@google.com>
If typehash (used by reflect) does not match the built-in map's hash,
then problems occur. If a map is built using reflect, and then
assigned to a variable of map type, the hash function can change. That
causes very bad things.
This issue is rare. MapOf consults a cache of all types that occur in
the binary before making a new one. To make a true new map type (with
a hash function derived from typehash) that map type must not occur in
the binary anywhere. But to cause the bug, we need a variable of that
type in order to assign to it. The only way to make that work is to
use a named map type for the variable, so it is distinct from the
unnamed version that MapOf looks for.
Fixes#37716
Change-Id: I3537bfceca8cbfa1af84202f432f3c06953fe0ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/222357
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Due to improved optimisation, we no longer emit SUBW for the write barrier
checks on riscv64, hence remove special handling in markUnsafePoints.
Change-Id: Ia1150c3e11f25e183735e58f8716a511d9e90fb3
Reviewed-on: https://go-review.googlesource.com/c/go/+/222638
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL copies IMAGE_FILE_*, IMAGE_SUBSYSTEM_* and
IMAGE_DLLCHARACTERISTICS_* consts from cmd/link/internal/ld package.
The consts are also used in cmd/go and debug/pe tests. So avoid the
duplication.
The consts are defined in
https://docs.microsoft.com/en-us/windows/win32/debug/pe-format
and might be useful to other Go users.
The CL also adds some related consts.
RELNOTE=yes
Change-Id: Iaa868deaffc7c61051f2273397f3e7e101880a5b
Reviewed-on: https://go-review.googlesource.com/c/go/+/222637
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Functions that are exported through cgo will now retain their
parameter names provided that their parameter names use only
ASCII characters.
Fixes#37746
Change-Id: Ia5f643e7d872312e81c224febd1f81ce14425c32
GitHub-Last-Rev: 220959beba
GitHub-Pull-Request: golang/go#37750
Reviewed-on: https://go-review.googlesource.com/c/go/+/222619
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change re-vendors x/tools to add the ifaceassert and stringintconv
checks to cmd/vet.
Fixes#32479.
Updates #4483.
Change-Id: I6bd30b0a3278592dfab4bd247036404ddaff09e4
Reviewed-on: https://go-review.googlesource.com/c/go/+/221339
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Rewrite string(int) to a string literal with a NUL byte, in preparation for the vet warning.
Updates #32479.
Change-Id: If4b6879334884324df3d566b6b4166ecf501d066
Reviewed-on: https://go-review.googlesource.com/c/go/+/221338
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Use a separate compiler pass to introduce complicated x86 addressing
modes. Loads in the normal architecture rules (for x86 and all other
platforms) can have constant offsets (AuxInt values) and symbols (Aux
values), but no more.
The complex addressing modes (x+y, x+2*y, etc.) are introduced in a
separate pass that combines loads with LEAQx ops.
Organizing rewrites this way simplifies the number of rewrites
required, as there are lots of different rule orderings that have to
be specified to ensure these complex addressing modes are always found
if they are possible.
Update #36468
Change-Id: I5b4bf7b03a1e731d6dfeb9ef19b376175f3b4b44
Reviewed-on: https://go-review.googlesource.com/c/go/+/217097
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Re-vendor x/net/dns/dnsmessage, x/net/route, and github.com/google/pprof
(commit 1ebb73c). The updated dependencies fix the string(int)
conversions, in preparation for the vet warning.
Updates #32479.
Change-Id: I023a4e30415d060f8b403b9943fe911f6d19f2e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/221337
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 212777 added a check to isNonNegative
to return true for unsigned values.
However, the SSA backend isn't type safe
enough for that to be sound.
The other checks in isNonNegative
look only at the pattern of bits.
Remove the type-based check.
Updates #37753
Change-Id: I059d0e86353453133f2a160dce53af299f42e533
Reviewed-on: https://go-review.googlesource.com/c/go/+/222620
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
It does nothing (it can't even be parsed).
Change-Id: I29abdddea1955d2ad93a97696f6542fa47cdb954
Reviewed-on: https://go-review.googlesource.com/c/go/+/222672
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I do not know much about xcoff, but this was probably the intended
behavior. (The comparison is tautologically false, as is.)
Also note: does any other code even depend on the changed code existing?
Maybe it should just be removed, as I did not find any uses of fields
that are written to if the branch condition tests true.
Change-Id: I1f23d33764df40e87f3e64460d63f6efc51a2a78
GitHub-Last-Rev: 268909130f
GitHub-Pull-Request: golang/go#37733
Reviewed-on: https://go-review.googlesource.com/c/go/+/222478
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Clément Chigot <clement.chigot%atos.net@gtempaccount.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
-gcflags=-flag means apply the flags only to the package named
on the command line (the main package, for these tests).
-gcflags=all=-flag means apply the flags to everything in the build,
including the standard library.
cmd/dist uses -gcflags=all=$GO_GCFLAGS, so test/run should do the same,
as the comment already explains, to avoid rebuilding the entire standard
library without the flags during test/run's builds.
We changed the scope of the flags without a pattern a few releases
ago and missed this one.
Change-Id: I039e60ca619d39e5b502261d4a73e1afc7e3f9fc
Reviewed-on: https://go-review.googlesource.com/c/go/+/213827
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Since json is popular and mime package's builtin type does not contain
it, and some Linux distributions do not contain the '/etc/mime.types' file
with minimal installations.
Change-Id: I933393c82be296ef176206c253f4dd19b6f33bb1
GitHub-Last-Rev: ce4eae56a4
GitHub-Pull-Request: golang/go#34737
Reviewed-on: https://go-review.googlesource.com/c/go/+/199657
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Cookies already work as http.Request parses the Cookie header on-demand
when the Cookie methods are called.
Change-Id: Ib7a6f68be02940ff0b56d2465c94545d6fd43847
Reviewed-on: https://go-review.googlesource.com/c/go/+/221417
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The default error string for a command failure is just its status code,
and "exit status 1" is not at all helpful for debugging.
Change-Id: I822c89bcc9e73283b33e01792bf9c40b1add3c35
Reviewed-on: https://go-review.googlesource.com/c/go/+/222308
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
'go test -json' should report that a test failed if the test binary
did not exit normally with status 0. This covers panics, non-zero
exits, and abnormal terminations.
These tests don't print a final result when run with -test.v (which is
used by 'go test -json'). The final result should be "PASS" or "FAIL"
on a line by itself. 'go test' prints "FAIL" in this case, but
includes error information.
test2json was changed in CL 192104 to report that a test passed if it
does not report a final status. This caused 'go test -json' to report
that a test passed after a panic or non-zero exit.
With this change, test2json treats "FAIL" with error information the
same as "FAIL" on a line by itself. This is intended to be a minimal
fix for backporting, but it will likely be replaced by a complete
solution for #29062.
Fixes#37555
Updates #29062
Updates #31969
Change-Id: Icb67bcd36bed97e6a8d51f4d14bf71f73c83ac3d
Reviewed-on: https://go-review.googlesource.com/c/go/+/222243
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
When generating stacks, the runtime automatically expands inline
functions to inline all inline frames in the stack. However, due to the
stack size limit, the final frame may be truncated in the middle of
several inline frames at the same location.
As-is, we assume that the final frame is a normal function, and emit and
cache a Location for it. If we later receive a complete stack frame, we
will first use the cached Location for the inlined function and then
generate a new Location for the "caller" frame, in violation of the
pprof requirement to merge inlined functions into the same Location.
As a result, we:
1. Nondeterministically may generate a profile with the different stacks
combined or split, depending on which is encountered first. This is
particularly problematic when performing a diff of profiles.
2. When split stacks are generated, we lose the inlining information.
We avoid both of these problems by performing a second expansion of the
last stack frame to recover additional inline frames that may have been
lost. This expansion is a bit simpler than the one done by the runtime
because we don't have to handle skipping, and we know that the last
emitted frame is not an elided wrapper, since it by definition is
already included in the stack.
Fixes#37446
Change-Id: If3ca2af25b21d252cf457cc867dd932f107d4c61
Reviewed-on: https://go-review.googlesource.com/c/go/+/221577
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
The test will remain flaky on the -nocgo builder until #37695 is addressed.
Updates #37695Fixes#33041
Change-Id: I5d661ef39e82ab1dce3a76e0e4059cf556135e89
Reviewed-on: https://go-review.googlesource.com/c/go/+/222158
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This was the last remaining use of staticbytes, so we can now
delete it.
The new code appears slightly faster on amd64:
name old time/op new time/op delta
SliceByteToString/1-4 6.29ns ± 2% 5.89ns ± 1% -6.46% (p=0.000 n=14+14)
This may not be the case on the big-endian architectures, since they have
to do an extra addition.
Updates #37612
Change-Id: Icb84c5911ba025f798de152849992a55be99e4f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/221979
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is one of several changes that were part of a larger rewrite
which I made in early 2019 after switching to the new number literal
syntax implementation. The purpose of the rewrite was to simplify
reading of source code (Unicode character by character) and speed up
the scanner but was never submitted for review due to other priorities.
Part 3 of 3:
This change contains a complete rewrite of source.go, the file that
implements reading individual Unicode characters from the source.
The new implementation is easier to use and has simpler literal
buffer management, resulting in faster scanner and thus parser
performance.
Thew new source.go (internal) API is centered around nextch() which
advances the scanner by one character. The scanner has been adjusted
around nextch() and now consistently does one character look-ahead
(there's no need for complicated ungetr-ing anymore). Only in one
case backtrack is needed (when finding '..' rather than '...') and
that case is now more cleanly solved with the new reset() function.
Measuring line/s parsing peformance by running
go test -run StdLib -fast -skip "syntax/(scanner|source)\.go"
(best of 5 runs on "quiet" MacBook Pro, 3.3GHz Dual-Core i7, 16GB RAM,
OS X 10.15.3) before and after shows consistently 3-5% improvement of
line parsing speed:
old: parsed 1788155 lines (3969 files) in 1.255520307s (1424234 lines/s)
new: parsed 1788155 lines (3969 files) in 1.213197037s (1473919 lines/s)
(scanner.go and parser.go are skipped because this CL changed those files.)
Change-Id: Ida947f4b538d42eb2d2349062c69edb6c9e5ca66
Reviewed-on: https://go-review.googlesource.com/c/go/+/221603
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This allows for zero stores to be performed using the zero register, rather
than loading a separate register with zero.
Change-Id: Ic81d8dbcdacbb2ca2c3f77682ff5ad7cdc33d18d
Reviewed-on: https://go-review.googlesource.com/c/go/+/221684
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
These changes fix go doc -src mode that vomits comments from random files if
filesystem does not sort files by name. The issue was with parse.ParseDir
using the Readdir order of files, which varies between platforms and filesystem
implementations. Another option is to merge comments using token.FileSet.Iterate
order in cmd/doc, but since ParseDir is mostly used in go doc, I’ve opted for
smaller change because it’s unlikely to break other uses or cause any perfomance
issues.
Example (macOS APFS): `go doc -src net.ListenPacket`
Change-Id: I7f9f368c7d9ccd9a2cbc48665f2cb9798c7b3a3f
GitHub-Last-Rev: 654fb45042
GitHub-Pull-Request: golang/go#36104
Reviewed-on: https://go-review.googlesource.com/c/go/+/210999
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This is one of several changes that were part of a larger rewrite
which I made in early 2019 after switching to the new number literal
syntax implementation. The purpose of the rewrite was to simplify
reading of source code (Unicode character by character) and speed up
the scanner but was never submitted for review due to other priorities.
Part 2 of 3:
This change contains improvements to the scanner error messages:
- Use "rune literal" rather than "character literal" to match the
spec nomenclature.
- Shorter, more to the point error messages.
(For instance, "more than one character in rune literal" rather
than "invalid character literal (more than one character)", etc.)
Change-Id: I1aaf79003374a68dbb05926437ed305cf2a8ec96
Reviewed-on: https://go-review.googlesource.com/c/go/+/221602
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This is one of several changes that were part of a larger rewrite
which I made in early 2019 after switching to the new number literal
syntax implementation. The purpose of the rewrite was to simplify
reading of source code (Unicode character by character) and speed up
the scanner but was never submitted for review due to other priorities.
Part 1 of 3:
This change contains improvements to the scanner tests.
Change-Id: Iecfcaef00fdeb690b0db786edbd52e828417141b
Reviewed-on: https://go-review.googlesource.com/c/go/+/221601
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
There are still two places in src/runtime/string.go that use
staticbytes, so we cannot delete it just yet.
There is a new codegen test to verify that the index calculation
is constant-folded, at least on amd64. ppc64, mips[64] and s390x
cannot currently do that.
There is also a new runtime benchmark to ensure that this does not
slow down performance (tested against parent commit):
name old time/op new time/op delta
ConvT2EByteSized/bool-4 1.07ns ± 1% 1.07ns ± 1% ~ (p=0.060 n=14+15)
ConvT2EByteSized/uint8-4 1.06ns ± 1% 1.07ns ± 1% ~ (p=0.095 n=14+15)
Updates #37612
Change-Id: I5ec30738edaa48cda78dfab4a78e24a32fa7fd6a
Reviewed-on: https://go-review.googlesource.com/c/go/+/221957
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Increase the size of the signal stack as the value given by SIGSTKSZ
is too small for the Go signal handler.
Fixes#37609
Change-Id: I56f1006bc69a2a9fb43f9e0da00061964290a690
Reviewed-on: https://go-review.googlesource.com/c/go/+/221804
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Trying this CL again, with a fixed test that allows platforms
to disagree on the exact behavior of converting NaNs.
We store 32-bit floating point constants in a 64-bit field, by
converting that 32-bit float to 64-bit float to store it, and convert
it back to use it.
That works for *almost* all floating-point constants. The exception is
signaling NaNs. The round trip described above means we can't represent
a 32-bit signaling NaN, because conversions strip the signaling bit.
To fix this issue, just forbid NaNs as floating-point constants in SSA
form. This shouldn't affect any real-world code, as people seldom
constant-propagate NaNs (except in test code).
Additionally, NaNs are somewhat underspecified (which of the many NaNs
do you get when dividing 0/0?), so when cross-compiling there's a
danger of using the compiler machine's NaN regime for some math, and
the target machine's NaN regime for other math. Better to use the
target machine's NaN regime always.
Update #36400
Change-Id: Idf203b688a15abceabbd66ba290d4e9f63619ecb
Reviewed-on: https://go-review.googlesource.com/c/go/+/221790
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The goal here is to make it easier for a human to
examine the SSA when a function contains lots of dead code.
No significant compiler metric or generated code differences.
Change-Id: I81915fa4639bc8820cc9a5e45e526687d0d1f57a
Reviewed-on: https://go-review.googlesource.com/c/go/+/221791
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
If an error occurs during the HTTP/2 upgrade phase, originally this
resulted in a pconn with pconn.alt set to an http2erringRoundTripper,
which always fails. This is not wanted - we want to retry in this case.
CL 202078 added a check for the http2erringRoundTripper to treat it
as a failed pconn, but the handling of the failure was wrong in the case
where the pconn is not in the idle list at all (common in HTTP/2).
This made the added test TestDontCacheBrokenHTTP2Conn flaky.
CL 218097 (unsubmitted) proposed to expand the handling of the
http2erringRoundTripper after the new check, to dispose of the pconn
more thoroughly. Bryan Mills pointed out in that review that we probably
shouldn't make the never-going-to-work pconn in the first place.
This CL changes the upgrade phase look for the http2erringRoundTripper
and return the underlying error instead of claiming to have a working
connection. Having done that, the CL undoes the change in CL 202078
and with it the need for CL 218097, but it keeps the new test added
by CL 202078.
On my laptop, before this commit, TestDontCacheBrokenHTTP2Conn
failed 66 times out of 20,000. With this commit, I see 0 out of 20,000.
Fixes#34978.
Fixes#35113.
Change-Id: Ibd908b63c2ae96e159e8e604213d8373afb350e3
Reviewed-on: https://go-review.googlesource.com/c/go/+/220905
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
