In TestPoolDequeue it's surprisingly common for the queue to stay
nearly empty the whole time and for a racing PopTail to happen in the
window between the producer doing a PushHead and doing a PopHead. In
short mode, there are only 100 PopTail attempts. On linux/amd64, it's
not uncommon for this to fail 50% of the time. On linux/arm64, it's
not uncommon for this to fail 100% of the time, causing the test to
fail.
This CL fixes this by only checking for a successful PopTail in long
mode. Long mode makes 200,000 PopTail attempts, and has never been
observed to fail.
Fixes#31422.
Change-Id: If464d55eb94fcb0b8d78fbc441d35be9f056a290
Reviewed-on: https://go-review.googlesource.com/c/go/+/183981
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TestPoolDequeue creates P-1 consumer goroutines and 1 producer
goroutine. Currently, if a consumer goroutine pops the last value from
the dequeue, it sets a flag that stops all consumers, but the producer
also periodically pops from the dequeue and doesn't set this flag.
Hence, if the producer were to pop the last element, the consumers
will continue to run and the test won't terminate. This CL fixes this
by also setting the termination flag in the producer.
I believe it's impossible for this to happen right now because the
producer only pops after pushing an element for which j%10==0 and the
last element is either 999 or 1999999, which means it should never try
to pop after pushing the last element. However, we shouldn't depend on
this reasoning.
Change-Id: Icd2bc8d7cb9a79ebfcec99e367c8a2ba76e027d8
Reviewed-on: https://go-review.googlesource.com/c/go/+/183980
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TestPoolDequeue in long mode does a little more than 1<<21 pushes.
This was originally because the head and tail indexes were 21 bits and
the intent was to test wrap-around behavior. However, in the final
version they were both 32 bits, so the test no longer tested
wrap-around.
It would take too long to reach 32-bit wrap around in a test, so
instead we initialize the poolDequeue with indexes that are already
nearly at their limit. This keeps the knowledge of the maximum index
in one place, and lets us test wrap-around even in short mode.
Change-Id: Ib9b8d85b6d9b5be235849c2b32e81c809e806579
Reviewed-on: https://go-review.googlesource.com/c/go/+/183979
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The @latest proxy endpoint is optional. If a proxy returns a 404 for
it, and returns an @v/list with no matching versions, then we should
allow module lookup to try other module paths. However, if the proxy
returns some other error (say, a 403 or 505), then the result of the
lookup is ambiguous, and we should report the actual error rather than
"no matching versions for query".
(This fix was prompted by discussion with Dmitri on CL 183619.)
Updates #32715
Updates #26334
Change-Id: I6d510a5ac24d48d9bc5037c3c747ac50695c663f
Reviewed-on: https://go-review.googlesource.com/c/go/+/183845
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
The test currently usses llvm.org, which seems to be very flaky today.
Change-Id: I3d01476d53f94d9170dbb087e3f3cf99581cdb4d
Reviewed-on: https://go-review.googlesource.com/c/go/+/183847
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
As suggested by thepudds in CL 183630.
Also adjust the paragraph to harmonize the transitions between the
newly-adjacent paragraphs.
Change-Id: Ie85abea946db81804c1995d27be4951d5db6b812
Reviewed-on: https://go-review.googlesource.com/c/go/+/183918
Reviewed-by: Jay Conrod <jayconrod@google.com>
Currently we use R16 and R17 for ARM64's Duff's devices.
According to ARM64 ABI, R16 and R17 can be used by the (external)
linker as scratch registers in trampolines. So don't use these
registers to pass information across functions.
It seems unlikely that calling Duff's devices would need a
trampoline in normal cases. But it could happen if the call
target is out of the 128 MB direct jump limit.
The choice of R20 and R21 is kind of arbitrary. The register
allocator allocates from low-numbered registers. High numbered
registers are chosen so it is unlikely to hold a live value and
forces a spill.
Fixes#32773.
Change-Id: Id22d555b5afeadd4efcf62797d1580d641c39218
Reviewed-on: https://go-review.googlesource.com/c/go/+/183842
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
When 'go install' is run without arguments in a directory containing a
main package, it deletes an executable file with the same name as the
package (presumably created by 'go build' previously).
'go get' in module mode executes the same code after updating and
downloading modules. However, the special case was misfiring because
we passed an empty list of patterns to InstallPackages.
Fixes#32766
Change-Id: I19aca64ee1fb5a216777dd7d559e8e6a45b3e90c
Reviewed-on: https://go-review.googlesource.com/c/go/+/183846
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Don't attempt to dereference basep if it's nil, just pass it to
getdirentries_freebsd12 as is.
Ported from x/sys/unix CL 183223
Change-Id: Id1c4e0eb6ff36dd39524da8194fed9a5957bce61
Reviewed-on: https://go-review.googlesource.com/c/go/+/183797
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It would be nice to have a test, but it requires running
this under the race detector which is a bit complicated
to set up; yet the fix is trivial. Verified manually that
it doesn't trip the race detector.
Fixes#32154.
Change-Id: I20bd746a07945c802f0476a1d8b1dfd83c87dae8
Reviewed-on: https://go-review.googlesource.com/c/go/+/183849
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It ends up making two similar types, [N]uint8 of both
alg and noalg varieties. Comparsions between the two then
don't come out equal when they should.
In particular, the type *[N]uint8 has an Elem pointer which
must point to one of the above two types; it can't point to both.
Thus allocating a *[N]uint8 and dereferencing it might be a
different type than a [N]uint8.
The fix is easy. Making a small test for this is really hard. It
requires that both a argless defer and the test be imported by a
common parent package. This is why a main binary doesn't see this
issue, but a test does (as Agniva noticed), because there's a wrapper
package that imports both the test and the defer.
Types like [N]uint8 don't really need to be marked noalg anyway,
as the generated code (if any) will be shared among all
vanilla memory types of the same size.
Fixes#32595
Change-Id: If7b77fa6ed56cd4495601c3f90170682d853b82f
Reviewed-on: https://go-review.googlesource.com/c/go/+/182357
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixup for two typos from CL 183630.
Change-Id: I7968a736680e8a6bbd1f4691d443b217702bc190
Reviewed-on: https://go-review.googlesource.com/c/go/+/183843
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Also fix up markup in the “Version validation” section to correct
indentation on Chrome.
Change-Id: Ib930d324567c086bbd0c67b105272bdfcca77b12
Reviewed-on: https://go-review.googlesource.com/c/go/+/183630
Reviewed-by: Jay Conrod <jayconrod@google.com>
When mod init with given module path, validate that module path is a
valid import path.
Note that module.CheckImportPath is used, because module.CheckPath
verifies that module path is something that "go get" can fetch, which is
strictly stronger condition than "a valid module path".
Updates #28389Fixes#32644
Change-Id: Ia60f218dd7d79186f87be723c28a96d6cb63017e
Reviewed-on: https://go-review.googlesource.com/c/go/+/182560
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The /list files in the module cache include pseudo-versions, but the
documentation for (*modfetch).Repo.Versions explicitly states that
they are not included in the output of that method.
Fixes#32715
Change-Id: Ieba1500b91f52b5fa689e70e16dbe3ad40de20f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/183402
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
CL 181881 added structured error types for direct fetches.
Use those same structured errors to format proxy errors consistently.
Also ensure that an empty @v/list is treated as equivalent to the module
not existing at all.
Updates #27173
Updates #32715
Change-Id: I203fd8259bc4f28b3389745f1a1fde936b0fa24d
Reviewed-on: https://go-review.googlesource.com/c/go/+/183619
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
In sigtramp of sys_darwin_arm.s, the callee-save register R4 is
saved to the stack, but later R2 is also saved to the save position.
That CL fixes the unexpected lost of the value in R4.
fixes#32744
Change-Id: Ifaeb99f11e4abf0c79bec9da67e0db97c358010c
Reviewed-on: https://go-review.googlesource.com/c/go/+/183517
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Ensure that during rewriting of expressions that take the address of
an array, that we properly recognize *ast.IndexExpr as an operation
to create a pointer variable and thus assign the proper addressOf
and deference operators as "&" and "*" respectively.
This fixes a regression from CL 142884.
Fixed#32579
Change-Id: I3cb78becff4f8035d66fc5536e5b52857eacaa3d
Reviewed-on: https://go-review.googlesource.com/c/go/+/183458
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The first call of ar must not show its output in order to avoid useless
error messages about D flag.
Change-Id: I3a2f5144b3bb271705000b67cd46cd02e98aca77
Reviewed-on: https://go-review.googlesource.com/c/go/+/182077
Run-TryBot: Clément Chigot <clement.chigot@atos.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also alphabetize port listing.
Change-Id: I4cc552a74856c9955571d721deb6223438c7d856
Reviewed-on: https://go-review.googlesource.com/c/go/+/183637
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
If we have found a repository at the requested version but it does not
contain a go.mod file in an appropriate subdirectory, then the module
with the given path does not exist at that version. Therefore, we
should report it with an error equivalent to os.ErrNotExist so that
modload.Query will continue to check other possible module paths.
Updates #27173
Change-Id: Ica73f4bb97f58e611a7f7d38183ee52fef5ee69a
Reviewed-on: https://go-review.googlesource.com/c/go/+/183618
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Adjusting gofrontend error messages for GCC standards causes the
messages expected by this test to be adjusted slightly: the gofrontend
code now quotes the _ identifier.
Change-Id: I55ee2ae70b4da3bf7a421ceea80b254dd17601a9
Reviewed-on: https://go-review.googlesource.com/c/go/+/183477
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Previously, most operations involving pseudo-versions allowed any
arbitrary combination of version string and date, and would resolve to
the underlying revision (typically a Git commit hash) as long as that
revision existed.
There are a number of problems with that approach:
• The pseudo-version participates in minimal version selection. If its
version prefix is inaccurate, the pseudo-version may appear to have
higher precedence that the releases that follow it, effectively
“pinning” the module to that commit. For release tags, module
authors are the ones who make the decision about release tagging;
they should also have control over the pseudo-version precedence
within their module.
• The commit date within the pseudo-version provides a total order
among pseudo-versions. If it is not accurate, the pseudo-version
will sort into the wrong place relative to other commits with the
same version prefix.
To address those problems, this change restricts the pseudo-versions
that the 'go' command accepts, rendering some previously
accepted-but-not-canonical versions invalid. A pseudo-version is now
valid only if all of:
1. The tag from which the pseudo-version derives points to the named
revision or one of its ancestors as reported by the underlying VCS
tool, or the pseudo-version is not derived from any tag (that is,
has a "vX.0.0-" prefix before the date string and uses the lowest
major version appropriate to the module path).
2. The date string within the pseudo-version matches the UTC timestamp
of the revision as reported by the underlying VCS tool.
3. The short name of the revision within the pseudo-version (such as a
Git hash prefix) is the same as the short name reported by the
underlying cmd/go/internal/modfetch/codehost.Repo. Specifically, if
the short name is a SHA-1 prefix, it must use the same number of
hex digits (12) as codehost.ShortenSHA1.
4. The pseudo-version includes a '+incompatible' suffix only if it is
needed for the corresponding major version, and only if the
underlying module does not have a go.mod file.
We believe that all releases of the 'go' tool have generated
pseudo-versions that meet these constraints. However, a few
pseudo-versions edited by hand or generated by third-party tools do
not. If we discover invalid-but-benign pseudo-versions in widely-used
existing dependencies, we may choose to add a whitelist for those
specific path/version combinations.
―
To work around invalid dependencies in leaf modules, users may add a
'replace' directive from the invalid version to its valid equivalent.
Note that the go command's go.mod parser automatically resolves commit
hashes found in 'replace' directives to the appropriate
pseudo-versions, so in most cases one can write something like:
replace github.com/docker/docker v1.14.0-0.20190319215453-e7b5f7dbe98c => github.com/docker/docker e7b5f7dbe98c
and then run any 'go' command (such as 'go list' or 'go mod tidy') to
resolve it to an appropriate pseudo-version. Note that the invalid
version will still be used in minimal version selection, so this use
of 'replace' directives is an incomplete workaround.
―
One of the common use cases for higher-than-tagged pseudo-versions is
for projects that do parallel development on release branches. For
example, if a project cuts a 'v1.2' release branch at v1.2.0, they may
want future commits on the main branch to show up as pre-releases for
v1.3.0 rather than for v1.2.1 — especially if v1.2.1 is already tagged
on the release branch. (On the other hand, a backport of a patch to
the v1.2 branch should not show up as a pre-release for v1.3.0.)
To address this use-case, module authors can make use of our existing
support for pseudo-versions derived from pre-release tags: if the
author adds an explicit pre-release tag (such as 'v1.3.0-devel') to
the first commit after the branch, then the pseudo-versions for that
commit and its descendents will be derived from that tag and will sort
appropriately in version selection.
―
Updates #27171Fixes#29262Fixes#27173Fixes#32662Fixes#32695
Change-Id: I0d50a538b6fdb0d3080aca9c9c3df1040da1b329
Reviewed-on: https://go-review.googlesource.com/c/go/+/181881
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
The old code only normalized decimal integer imaginary number
literals. But with the generalized imaginary number syntax,
the number value may be decimal, binary, octal, or hexadecimal,
integer or floating-point.
The new code only looks at the number pattern. Only for decimal
integer imaginary literals do we need to strip leading zeroes.
The remaining normalization code simply ignore the 'i' suffix.
As a result, the new code is both simpler and shorter.
Fixes#32718.
Change-Id: If43fc962a48ed62002e65d5c81fddbb9bd283984
Reviewed-on: https://go-review.googlesource.com/c/go/+/183378
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Tweak the previous fix for issue 32673 (in CL 182958) to work around
problems with c-shared build mode that crop up on some of the builders
(10.11, 10.12). We now consistently set vmaddr and vmsize to zero
for the DWARF segment regardless of build mode.
Updates #32673
Change-Id: Id1fc213590ad00c28352925e2d754d760e022b5e
Reviewed-on: https://go-review.googlesource.com/c/go/+/183237
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Change-Id: I4a5c7573e13dd85531ee9f4dd2a0d1981bf8cdfa
Reviewed-on: https://go-review.googlesource.com/c/go/+/51412
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts https://golang.org/cl/182258.
The new code caused unpredictable crashes that are not understood. The old code was occasionally flaky but still better than this approach.
Fixes#32655
Updates #31264
Change-Id: I2e9d27d6052e84bf75106d8b844549ba4f571695
Reviewed-on: https://go-review.googlesource.com/c/go/+/182880
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
If reading 0 bytes, don't return the error from the underlying
io.Reader if there is still data buffered.
Fixes#32693
Change-Id: I12a97bd6003c638c15d41028942f27edf88340e2
Reviewed-on: https://go-review.googlesource.com/c/go/+/182997
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The RFC recommends checking the X25519 output to ensure it's not the
zero value, to guard against peers trying to remove contributory
behavior.
In TLS there should be enough transcript involvement to mitigate any
attack, and the RSA key exchange would suffer from the same issues by
design, so not proposing a backport.
See #31846
Change-Id: I8e657f8ee8aa72c3f8ca3b124555202638c53f5e
Reviewed-on: https://go-review.googlesource.com/c/go/+/183039
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Removed cross-dependencies between handshake_server_test.go and
handshake_client_test.go; moved all initialization to TestMain; replaced
SSLKEYLOGFILE environment variable with -keylog flag.
Change-Id: Ida6712daa44e01a2c00658e8a1896087ee88bcb0
Reviewed-on: https://go-review.googlesource.com/c/go/+/183057
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
