Currently the page allocator bitmap is implemented as a single giant
memory mapping which is reserved at init time and committed as needed.
This causes problems on systems that don't handle large uncommitted
mappings well, or institute low virtual address space defaults as a
memory limiting mechanism.
This change modifies the implementation of the page allocator bitmap
away from a directly-mapped set of bytes to a sparse array in same vein
as mheap.arenas. This will hurt performance a little but the biggest
gains are from the lockless allocation possible with the page allocator,
so the impact of this extra layer of indirection should be minimal.
In fact, this is exactly what we see:
https://perf.golang.org/search?q=upload:20191125.5
This reduces the amount of mapped (PROT_NONE) memory needed on systems
with 48-bit address spaces to ~600 MiB down from almost 9 GiB. The bulk
of this remaining memory is used by the summaries.
Go processes with 32-bit address spaces now always commit to 128 KiB of
memory for the bitmap. Previously it would only commit the pages in the
bitmap which represented the range of addresses (lowest address to
highest address, even if there are unused regions in that range) used by
the heap.
Updates #35568.
Updates #35451.
Change-Id: I0ff10380156568642b80c366001eefd0a4e6c762
Reviewed-on: https://go-review.googlesource.com/c/go/+/207497
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Additional vet flags specified by user are discarded if 'go vet'
is invoked outside $GOROOT/src to check a package under $GOROOT
(including those under "vendor" of $GOROOT), fix it by avoiding the
overwriting, the logic of detemining if the package under vetting
comes from $GOROOT remains untouched.
Also checked 'go tool vet <options> <cfg>' and 'go vet <options>
<user pkg>', both worked w./w.o this fix.
Fixes#35837.
Change-Id: I549af7964e40440afd35f2d1971f77eee6f8de34
Reviewed-on: https://go-review.googlesource.com/c/go/+/209498
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
We were using the race context of the P that held the timer,
but since we unlock the P's timers while executing a timer
that could lead to a race on the race context itself.
Updates #6239
Updates #27707Fixes#35906
Change-Id: I5f9d5f52d8e28dffb88c3327301071b16ed1a913
Reviewed-on: https://go-review.googlesource.com/c/go/+/209580
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
The previous fix for this issue (CL 208479) was not general enough;
this patch revises it to handle more cases.
The problem with the original fix was that once a sym.Symbol is
created for a given static symbol and given a bogus anonymous version
of -1, we hit problems if some other non-anonymous symbol (created by
host object loading) had relocations targeting the static symbol.
In this patch instead of assigning a fixed anonymous version of -1 to
such symbols, each time loader.Create is invoked we create a new
(unique) anonymous version for the sym.Symbol, then enter the result
into the loader's extStaticSyms map, permitting it to be found in
lookups when processing relocation targets.
NB: this code will hopefully get a lot simpler once we can move host
object loading away from early sym.Symbol creation.
Updates #35779.
Change-Id: I450ff577e17549025565d355d6707a2d28a5a617
Reviewed-on: https://go-review.googlesource.com/c/go/+/208778
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The commit de36d1 (CL 4635083) changed the test time
from 2009 to 2010 but forgot to update the comment.
Change-Id: Ia2928773dd184f168fddde126d0bb936de8cfc29
GitHub-Last-Rev: bf8eb57140
GitHub-Pull-Request: golang/go#35930
Reviewed-on: https://go-review.googlesource.com/c/go/+/209517
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Plan 9 doesn't have a way to reserve virtual memory, so the
implementation of sysReserve allocates memory space (which won't
be backed with real pages until the virtual pages are referenced).
If the space is then freed with sysFree, it's not returned to
the OS (because Plan 9 doesn't allow shrinking a shared address
space), but it must be cleared to zeroes in case it's reallocated
subsequently.
This interacts badly with the way mallocinit on 64-bit machines
sets up the heap, calling sysReserve repeatedly for a very large
(64MB?) arena with a non-nil address hint, and then freeing the space
again because it doesn't have the expected alignment. The
repeated clearing of multiple megabytes adds significant startup
time to every go program.
We correct this by restricting sysReserve to allocate memory only
when the caller doesn't provide an address hint. If a hint is
provided, sysReserve will now return nil instead of allocating memory
at a different address.
Fixes#27744
Change-Id: Iae5a950adefe4274c4bc64dd9c740d19afe4ed1c
Reviewed-on: https://go-review.googlesource.com/c/go/+/207917
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>
This change makes it so that waking up the scavenger readies its
goroutine without "next" set, so that it doesn't interfere with the
application's use of the runnext feature in the scheduler which helps
fairness.
As of CL 201763 the scavenger began waking up much more often, and in
TestPingPongHog this meant that it would sometimes supercede either a
hog or light goroutine in runnext, leading to a skew in the results and
ultimately a test flake.
This change thus re-enables the TestPingPongHog test on the builders.
Fixes#35271.
Change-Id: Iace08576912e8940554dd7de6447e458ad0d201d
Reviewed-on: https://go-review.googlesource.com/c/go/+/208380
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Adds an additional lock around an access to modOnly.
Updates #35317
Change-Id: Ia1e75f9a674ec2a2c0489b41283c1cd3e7924d1e
Reviewed-on: https://go-review.googlesource.com/c/go/+/209237
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Lack of logging hinders debugging. Like many other go commands,
let's allow users to inspect what is going on underneath.
Example:
$ GO111MODULE=on GOPROXY=direct GOPATH=`mktemp -d` go mod download -x golang.org/x/tools/gopls@latest
mkdir -p /var/folders/bw/6r6k9d113sv1_vvzk_1kfxbm001py5/T/tmp.ykhTiXaS/pkg/mod/cache/vcs # git3 https://go.googlesource.com/tools
...
Update #35849
Change-Id: I5577e683ae3c0145b11822df255b210ad9f60c87
Reviewed-on: https://go-review.googlesource.com/c/go/+/208558
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Currently scavengeAll (which is called by debug.FreeOSMemory) doesn't
reset the scavenge address before scavenging, meaning it could miss
large portions of the heap. Fix this by reseting the address before
scavenging, which will ensure it is able to walk over the entire heap.
Fixes#35858.
Change-Id: I4a7408050b8e134318ff94428f98cb96a1795aa9
Reviewed-on: https://go-review.googlesource.com/c/go/+/208960
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Note that ioutil.WriteFile's perm argument is the value before the
umask is applied.
Fixes#35835
Change-Id: I61cd9c88bced3be52b616d86e060cd3fd912ab1f
Change-Id: I61cd9c88bced3be52b616d86e060cd3fd912ab1f
GitHub-Last-Rev: 0069abb7c5
GitHub-Pull-Request: golang/go#35836
Reviewed-on: https://go-review.googlesource.com/c/go/+/208838
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Print the current SP and (old) stack bounds when the stack grows
too large. This helps to identify the problem: whether a large
stack is used, or something else goes wrong.
For #35470.
Change-Id: I34a4064d5c7280978391d835e171b90d06f87222
Reviewed-on: https://go-review.googlesource.com/c/go/+/207351
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
When there are both a synchronous preemption request (by
clobbering the stack guard) and an asynchronous one (by signal),
the running goroutine may observe the synchronous request first
in stack bounds check, and go to the path of calling morestack.
If the preemption signal arrives at this point before the call to
morestack, the goroutine will be asynchronously preempted,
entering the scheduler. When it is resumed, the scheduler clears
the preemption request, unclobbers the stack guard. But the
resumed goroutine will still call morestack, as it is already on
its way. morestack will, as there is no preemption request,
double the stack unnecessarily. If this happens multiple times,
the stack may grow too big, although only a small amount is
actually used.
To fix this, we mark the stack bounds check and the call to
morestack async-nonpreemptible, starting after the memory
instruction (mostly a load, on x86 CMP with memory).
Not done for Wasm as it does not support async preemption.
Fixes#35470.
Change-Id: Ibd7f3d935a3649b80f47539116ec9b9556680cf2
Reviewed-on: https://go-review.googlesource.com/c/go/+/207350
Reviewed-by: David Chase <drchase@google.com>
Currently we use stack map index -2 to mark unsafe points, i.e.
PC ranges that is not safe for async preemption. This has a
problem: it cannot mark CALL instructions, because for stack scan
a valid stack map index is needed.
This CL switches to use register map index for marking unsafe
points instead, which does not conflict with stack scan and can
be applied on CALL instructions. This is necessary as next CL
will mark call to morestack nonpreemptible.
For #35470.
Change-Id: I357bf26c996e1fee1e7eebe4e6bb07d62930d3f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/207349
Reviewed-by: David Chase <drchase@google.com>
Based on 'go help goproxy'.
Updates #33637
Change-Id: I2f3477cfc8f6fb53515604a28a5bc01eb4fe8f48
Reviewed-on: https://go-review.googlesource.com/c/go/+/208777
Reviewed-by: Katie Hockman <katie@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This CL pulls in a fix to golang.org/x/mod/modfile. No change needed
to cmd/go.
Fixes#35737
Change-Id: I7ca1bb46d2923b01587042f0f312d3c3df54c425
Reviewed-on: https://go-review.googlesource.com/c/go/+/208977
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On darwin, we use libc calls, and cgo is required on ARM and
ARM64 so we have TLS set up to save/restore G during C calls. If
cgo is absent, we cannot save/restore G in TLS, and if a signal
is received during C execution we cannot get the G. Therefore
don't send signals (and hope that we won't receive any signal
during C execution).
This can only happen in the go_bootstrap program (otherwise cgo
is required).
Fixes#35800.
Change-Id: I6c02a9378af02c19d32749a42db45165b578188d
Reviewed-on: https://go-review.googlesource.com/c/go/+/208818
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
rmdir is a built-in of cmd.exe. It's also an alias in powershell.exe. We
want always the cmd.exe on, so specify it explicitly.
Fixes#35813
Change-Id: I89723e993ee26a20b42d03b8a725ff10ccf30505
Reviewed-on: https://go-review.googlesource.com/c/go/+/208639
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Instead of installing shared libraries to GOROOT/pkg, clone the
necessary files into a new GOROOT and run there.
Given that we now have a build cache, ideally we should not need to
install into GOROOT/pkg at all, but we can't fix that during the 1.14
code freeze.
Updates #28387
Updates #28553
Updates #30316
Change-Id: I83084a8ca29a5dffcd586c7fccc3f172cac57cc6
Reviewed-on: https://go-review.googlesource.com/c/go/+/208482
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Otherwise, these tests produce no output, which can make the overall
output of all.bash a bit tricky to decipher.
Updates #30316
Updates #29062
Change-Id: I33b9e070fd28b9f21ece128e9e603a982c08b7cc
Reviewed-on: https://go-review.googlesource.com/c/go/+/208483
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
It turns out that the relative-path support never worked in the first
place.
It had been masked by the fact that we ~never invoke overlayDir with
an absolute path, which caused filepath.Rel to always return an error,
and overlayDir to always fall back to absolute paths.
Since the absolute paths seem to be working fine (and are simpler),
let's stick with those. As far as I can recall, the relative paths
were only a space optimization anyway.
Updates #28387
Updates #30316
Change-Id: Ie8cd28f3c41ca6497ace2799f4193d7f5dde7a37
Reviewed-on: https://go-review.googlesource.com/c/go/+/208481
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This Patch describes NOOP in Go assembly syntax and gives Go assembly
example and corresponding GNU assembly example.
Change-Id: I9db659cc5e3dc6b1f1450f2064255af8872d4b1c
Reviewed-on: https://go-review.googlesource.com/c/go/+/207400
Run-TryBot: eric fang <eric.fang@arm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
cgo_mmap.go:mmap() is called by mem_linux.go:sysAlloc(), a low-level memory
allocation function. mmap() should be nosplit, since it is called in a lot of
low-level parts of the runtime and callers often assume it won't acquire any
locks.
As an example there is a potential deadlock involving two threads if mmap is not nosplit:
trace.bufLock acquired, then stackpool[order].item.mu, then mheap_.lock
- can happen for traceEvents that are not invoked on the system stack and cause
a traceFlush, which causes a sysAlloc, which calls mmap(), which may cause a
stack split. mheap_.lock
mheap_.lock acquired, then trace.bufLock
- can happen when doing a trace in reclaimChunk (which holds the mheap_ lock)
Also, sysAlloc() has a comment that it is nosplit because it may be invoked
without a valid G, in which case its callee mmap() should also be nosplit.
Similarly, sys_darwin.go:mmap() is called by mem_darwin.go:sysAlloc(), and should
be nosplit for the same reasons.
Extra gomote testing: linux/arm64, darwin/amd64
Change-Id: Ia4d10cec5cf1e186a0fe5aab2858c6e0e5b80fdc
Reviewed-on: https://go-review.googlesource.com/c/go/+/207844
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Skip TestMinusRSymsWithSameName testpoint on MIPS for the time being
since it triggers failures on that arch. Will re-enable once the
problems are fixed.
Updates #35779.
Change-Id: I3e6650158ab04a2be77e3db5a5194df3bbb0859e
Reviewed-on: https://go-review.googlesource.com/c/go/+/208557
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Because of concurrent goroutines it is possible for multiple event
handlers to return at the same time. This was not properly supported
and caused the wrong goroutine to continue, which in turn caused
memory corruption.
This change adds a stack of events so it is always clear which is the
innermost event that needs to return next.
Fixes#35256
Change-Id: Ia527da3b91673bc14e84174cdc407f5c9d5a3d09
Reviewed-on: https://go-review.googlesource.com/c/go/+/204662
Run-TryBot: Richard Musiol <neelance@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This adds a new test that builds a small Go program with linked
against a *.syso file that is the result of an "ld -r" link. The
sysobj in question has multiple static symbols in the same section
with the same name, which triggered a bug in the loader in -newobj
mode.
Updates #35779.
Change-Id: Ibe1a75662dc1d49c4347279e55646ee65a81508e
Reviewed-on: https://go-review.googlesource.com/c/go/+/208478
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When the ELF host object loader encounters a static/hidden symbol, it
creates a sym.Symbol for it but does not enter it into the sym.Symbols
lookup table. Under -newobj mode, this was not happening correctly; we
were adding the sym via loader.LookupOrCreate, which resulted in
collisions when it encountered symbols with the same name + version +
section (this can happen for "ld -r" objects).
Fixes#35779.
Change-Id: I36d40fc1efc03fc1cd8ae6b76cb6a0d2a957389c
Reviewed-on: https://go-review.googlesource.com/c/go/+/208479
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Before May 2018, I mistakenly thought the _suffix naming convention¹
used by examples also applied to tests. Thanks to a code review comment²
from Ian Lance Taylor, I have since learned that is not true.
This trivial change fixes some collateral damage from my earlier
misunderstanding, resulting in improved test naming consistency.
¹ https://golang.org/pkg/testing/#hdr-Examples
² https://go-review.googlesource.com/c/go/+/112935/1/src/path/filepath/path_test.go#1075
Change-Id: I555f60719629eb64bf2f096aa3dd5e00851827cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/207446
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Both laptops closing their lids and cloud container runtimes
suspending VMs both faced the problem where an idle HTTP connection
used by the Transport could be cached for later reuse before the
machine is frozen, only to wake up many minutes later to think that
their HTTP connection was still good (because only a second or two of
monotonic time passed), only to find out that the peer hung up on them
when they went to write.
HTTP/1 connection reuse is inherently racy like this, but no need for
us to step into a trap if we can avoid it. Also, not everybody sets
Request.GetBody to enable re-tryable POSTs. And we can only safely
retry requests in some cases.
So with this CL, before reusing an old connection, double check the walltime.
Testing was done both with a laptop (closing the lid for a bit) and
with QEMU, running "stop" and "cont" commands in the monitor and
sending QMP guest agent commands to update its wall clock after the
"cont":
echo '{"execute":"guest-set-time"}' | socat STDIN UNIX-CONNECT:/var/run/qemu-server/108.qga
In both cases, I was running
https://gist.github.com/bradfitz/260851776f08e4bc4dacedd82afa7aea and
watching that the RemoteAddr changed after resume.
It's kinda difficult to write an automated test for. I gave a lightning talk on
using pure emulation user mode qemu for such tests:
https://www.youtube.com/watch?v=69Zy77O-BUMhttps://docs.google.com/presentation/d/1rAAyOTCsB8GLbMgI0CAbn69r6EVWL8j3DPl4qc0sSlc/edit?usp=sharinghttps://github.com/google/embiggen-disk/blob/master/integration_test.go
... that would probably be a good direction if we want an automated
test here. But I don't have time to do that now.
Updates #29308 (HTTP/2 remains)
Change-Id: I03997e00491f861629d67a0292da000bd94ed5ca
Reviewed-on: https://go-review.googlesource.com/c/go/+/204797
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The test was comparing a binary built from a list of files to a test
build from a named package. That should not (and did not) work. The
test now compares two binaries built the same way in different
directories.
Also add a portion of the test for GOPATH and fix the gccgo portion of
the test (verified manually).
Fixes#35435
Change-Id: I2535a0011c9d97d2274e5550ae277302dbb91e6f
Reviewed-on: https://go-review.googlesource.com/c/go/+/208234
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In module mode, a non-main package lacks an install target.
The location of the .shlib corresponding to a given target is stored
in a .shlibname file alongside its install target, so in module mode
a non-main package also lacks a .shlibname file.
This also implies that such a package cannot be installed with
'go install -buildmode=linkshared', but that is a problem
for another day.
Fixes#35759
Updates #34347
Change-Id: Id3e0e068266d5fb9b061a59e70f9a65985d4973b
Reviewed-on: https://go-review.googlesource.com/c/go/+/208233
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
In CL 208233 I am fixing a panic that occurs only with a specific
build mode. I want that test to run on all platforms that support that
build mode, but the logic for determining support is somewhat
involved.
For now, I am duplicating that logic into the cmd/internal/sys
package, which already reports platform support for other build flags.
We can refactor cmd/go/internal/work to use the extracted function in
a followup CL.
Updates #35759
Change-Id: Ibbaedde4d1e8f683c650beedd10849bc27e7a6e7
Reviewed-on: https://go-review.googlesource.com/c/go/+/208457
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Previously, 'go test -v' in this directory would result in a massive
dump of go command output, because the test plumbed -v to 'build -x'.
This change separates them into distinct flags, so that '-v' only
implies the display of default 'go' command output.
Updates #30316
Change-Id: Ifb125f35ec6a0bebe7e8286e7c546d132fb213df
Reviewed-on: https://go-review.googlesource.com/c/go/+/208232
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
After CL 182657 we no longer hold worldsema across the GC, we hold
gcsema instead.
However in STW GC mode we don't release worldsema before calling Gosched
on the user goroutine (note that user goroutines are disabled during STW
GC) so that user goroutine holds onto it. When the GC is done and the
runtime inevitably wants to "stop the world" again (though there isn't
much to stop) it'll sit there waiting for worldsema which won't be
released until the aforementioned goroutine is scheduled, which it won't
be until the GC is done!
So, we have a deadlock.
The fix is easy: just release worldsema before calling Gosched.
Fixes#34736.
Change-Id: Ia50db22ebed3176114e7e60a7edaf82f8535c1b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/208379
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TestPhysicalMemoryUtilization occasionally fails on some platforms by
only a small margin. The reason for this is that it assumes the
scavenger will always be able to scavenge all the memory that's released
by sweeping, but because of the page cache, there could be free and
unscavenged memory held onto by a P which the scavenger simply cannot
get to.
As a result, if the page cache gets filled completely (512 KiB of free
and unscavenged memory) this could skew a test which expects to
scavenge roughly 8 MiB of memory. More specifically, this is 512 KiB of
memory per P, and if a system is more inclined to bounce around
between Ps (even if there's only one goroutine), this memory can get
"stuck".
Through some experimentation, I found that failures correlated highly
with relatively large amounts of memory ending up in some page cache
(like 60 or 64 pages) on at least one P.
This change changes the test's threshold such that it accounts for the
page cache, and scales up with GOMAXPROCS. Because the test constants
themselves don't change, however, the test must now also bound
GOMAXPROCS such that the threshold doesn't get too high (at which point
the test becomes meaningless).
Fixes#35580.
Change-Id: I6bdb70706de991966a9d28347da830be4a19d3a1
Reviewed-on: https://go-review.googlesource.com/c/go/+/208377
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Verify that 'go generate' works with -modfile. Also check that
go commands starts with 'go generate' do not inherit -modfile, but
they should still work if -modfile is set in GOFLAGS.
Updates #34506
Change-Id: I5e1f897b4e38e4fdaccc0fbb7a71b8d0e9fc0660
Reviewed-on: https://go-review.googlesource.com/c/go/+/208236
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The tests in this package invoked 'go install -i -buildmode=c-shared'
in order to generate an archive as well as multiple C header files.
Unfortunately, the behavior of the '-i' flag is inappropriately broad
for this use-case: it not only generates the library and header files
(as desired), but also attempts to install a number of (unnecessary)
archive files for transitive dependencies to
GOROOT/pkg/$GOOS_$GOARCH_testcshared_shared, which may not be writable
— for example, if GOROOT is owned by the root user but the test is
being run by a non-root user.
Instead, for now we generate the header files for transitive dependencies
separately by running 'go tool cgo -exportheader'.
In the future, we should consider how to improve the ergonomics for
generating transitive header files without coupling that to
unnecessary library installation.
Updates #28387
Updates #30316
Updates #35715
Change-Id: I622426a860828020d98f7040636f374e5c766d28
Reviewed-on: https://go-review.googlesource.com/c/go/+/208119
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also add a -testwork flag to facilitate debugging the test itself.
Three of the tests of this package invoked 'go install -i
-buildmode=c-archive' in order to generate an archive as well as
multiple C header files.
Unfortunately, the behavior of the '-i' flag is inappropriately broad
for this use-case: it not only generates the library and header files
(as desired), but also attempts to install a number of (unnecessary)
archive files for transitive dependencies to
GOROOT/pkg/$GOOS_$GOARCH_shared, which may not be writable — for
example, if GOROOT is owned by the root user but the test is being run
by a non-root user.
Instead, for now we generate the header files for transitive dependencies
separately by running 'go tool cgo -exportheader'.
In the future, we should consider how to improve the ergonomics for
generating transitive header files without coupling that to
unnecessary library installation.
Updates #28387
Updates #30316
Updates #35715
Change-Id: I3d483f84e22058561efe740aa4885fc3f26137b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/208117
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The profile proto message builder maintains a location entry cache
that maps a location (possibly involving multiple user frames
that represent inlined function calls) to the location id. We have
been using the first pc of the inlined call sequence as the key of
the cached location entry assuming that, for a given pc, the sequence
of frames representing the inlined call stack is deterministic and
stable. Then, when analyzing the new stack trace, we expected the
exact number of pcs to be present in the captured stack trace upon
the cache hit.
This assumption does not hold, however, in the presence of the stack
trace truncation in the runtime during profiling, and also with the
potential bugs in runtime.
A better fix is to use all the pcs of the inlined call sequece as
the key instead of the first pc. But that is a bigger code change.
This CL avoids the crash assuming the trace was truncated.
Fixes#35538
Change-Id: I8c6bae98bc8b178ee51523c7316f56b1cce6df16
Reviewed-on: https://go-review.googlesource.com/c/go/+/207609
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
