Autos must be kept if their address reaches the control value of a
block. We didn't see this before because it is rare for an auto's
address to reach a control value without also reaching a phi or
being written to memory. We can probably optimize away the
comparisons that lead to this scenario since autos cannot alias
with pointers from elsewhere, however for now we take the
conservative approach and just ensure the auto is properly
initialised if its address reaches a control value.
Fixes#26407.
Change-Id: I02265793f010a9e001c3e1a5397c290c6769d4de
Reviewed-on: https://go-review.googlesource.com/124335
Reviewed-by: David Chase <drchase@google.com>
If both branches of a write barrier test go to the same block,
then there's no unsafe points.
This can only happen if the resulting memory state is somehow dead,
which can only occur in degenerate cases, like infinite loops. No
point in cleaning up the useless branch in these situations.
Fixes#26024.
Change-Id: I93a7df9fdf2fc94c6c4b1fe61180dc4fd4a0871f
Reviewed-on: https://go-review.googlesource.com/123655
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Lack of a well-defined order between VarDef and related
address operations sometimes causes problems with store order
and write barrier transformations; glitches in the order are
made irreparable (by later optimizations) if the two parts of
the glitch straddle a split in the original block caused by
insertion of a write barrier diamond.
Fix this by creating a LocalAddr for addresses of locals
(what VarDef matters for) that takes a memory input to
help make the order explicit. Addr is modified to only
be legal for SB operand, so there is no overlap between
Addr and LocalAddr uses (there may be some downstream
cleanup from this).
Changes to generic.rules and rewrite.go ensure that codegen
tests continue to pass; CSE of LocalAddr is impaired, not
quite sure of the cost.
Fixes#26105.
Change-Id: Id4192b4440aa4e9d7ba54a465c456df9b530b515
Reviewed-on: https://go-review.googlesource.com/122483
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
For golang.org/cl/74110, I forgot that you can use range-based for
loops to extract key values from a map value.
This wasn't a problem for the binary format importer, because it was
more tolerant about missing inline function bodies. However, the
indexed importer is more particular about this.
We could potentially just make it more lenient like the binary
importer, but tweaking the logic here is easy enough and seems like
the preferable solution.
Fixes#26341.
Change-Id: I54564dcd0be60ea393f8a0f6954b7d3d61e96ee5
Reviewed-on: https://go-review.googlesource.com/123475
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Fix the panic message produced for an interface conversion error to
only say "types from different packages" if they are definitely from
different packges. If they may be from the same package, say "types
from different scopes."
Updates #18911Fixes#26094
Change-Id: I0cea50ba31007d88e70c067b4680009ede69bab9
Reviewed-on: https://go-review.googlesource.com/123395
Reviewed-by: Austin Clements <austin@google.com>
Functions exported on behalf of other packages need to have their
argument stack maps specified explicitly. They don't get an implicit
map because they are not in the local package, and if they get defer'd
they need argument maps.
Fixes#24419
Change-Id: I35b7d8b4a03d4770ba88699e1007cb3fcb5397a9
Reviewed-on: https://go-review.googlesource.com/122676
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When DWARF is disabled, some alg functions were not generated.
Make sure they are generated when we about to generate calls to
them.
Fixes#23546.
Change-Id: Iecfa0eea830e42ee92e55268167cefb1540980b2
Reviewed-on: https://go-review.googlesource.com/122403
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
We need to make sure that the terminating comparison has the right
sense given the increment direction. If the increment is positive,
the terminating comparsion must be < or <=. If the increment is
negative, the terminating comparison must be > or >=.
Do a few cleanups, like constant-folding entry==0, adding comments,
removing unused "exported" fields.
Fixes#26116
Change-Id: I14230ee8126054b750e2a1f2b18eb8f09873dbd5
Reviewed-on: https://go-review.googlesource.com/121940
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Expanding interface method sets is handled during width calculation,
which can't be performed concurrently. Make sure that we eagerly
expand interfaces in the frontend when importing them, even if they're
not actually used by code, because we might need to generate a type
description of them.
Fixes#25055.
Change-Id: I6fd2756de2c7d5dbc33056f70b3028ca3aebab41
Reviewed-on: https://go-review.googlesource.com/122517
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Late opt pass may generate dead stores, which messes up store
chain calculation in later passes. Run generic deadcode even
in -N mode to remove them.
Fixes#26163.
Change-Id: I8276101717bb978d5980e6c7998f53fd8d0ae10f
Reviewed-on: https://go-review.googlesource.com/121856
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
If the address of an auto reaches a phi then any further stores to
the pointer represented by the phi probably need to be kept. This
is because stores to the other arguments to the phi may be visible
to the program.
Fixes#26153.
Change-Id: Ic506c6c543bf70d792e5b1a64bdde1e5fdf1126a
Reviewed-on: https://go-review.googlesource.com/121796
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This reverts commit 1a27f048ad.
Reason for revert: Broke the ssacheck and -N-l builders, and the -N-l fix looks like it will take some time and take a different route entirely.
Change-Id: Ie0ac5e86ab7d72a303dfbbc48dfdf1e092d4f61a
Reviewed-on: https://go-review.googlesource.com/121715
Reviewed-by: David Chase <drchase@google.com>
Given a carefully constructed input, writebarrier would
split a block with the OpAddr in the first half and the
VarDef in the second half which ultimately leads to a
compiler crash because the scheduler is no longer able
to put them in the proper order.
To fix, recognize the implicit dependence of OpAddr on
the VarDef of the same symbol if any exists.
This fix was chosen over making OpAddr take a memory
operand to make the dependence explicit, because this
change is less invasive at this late part of the 1.11
release cycle.
Fixes#26105.
Change-Id: I9b65460673af3af41740ef877d2fca91acd336bc
Reviewed-on: https://go-review.googlesource.com/121436
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
SSA can handle 1-element array, but only when the element type
is SSAable. When building SSA for INDEX of 1-element array, we
did not check the element type is SSAable. And when it's not,
it resulted in an unhandled SSA op.
Fixes#26120.
Change-Id: Id709996b5d9d90212f6c56d3f27eed320a4d8360
Reviewed-on: https://go-review.googlesource.com/121496
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Code generation for OpAMD64CMOV[WLQ]EQF uses AX as a scratch register,
but only CMOVQEQF, correctly lets compiler know. Mark other 2 as
clobbering AX.
Fixes#26097
Change-Id: I2a65bd67bf18a540898b4a0ae6c8766e0b767b19
Reviewed-on: https://go-review.googlesource.com/121336
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
On Wasm, the offset was not folded into LoweredAddr, so it was
not rematerializeable. This led to the address-taken operation
in some cases generated too early, before the local variable
becoming live. The liveness code thinks the variable live when
the address is taken, then backs it up to live at function
entry, then complains about it, because nothing other than
arguments should be live on entry.
This CL folds the offset into the address operation, so it is
rematerializeable and so generated right before use, after the
variable actually becomes live.
It might be possible to relax the liveness code not to think a
variable live when its address being taken, but until the address
actually being used. But it would be quite complicated. As we're
late in Go 1.11 freeze, it would be better not to do it. Also,
I think the address operation is rematerializeable now on all
architectures, so this is probably less necessary.
This may also be a slight optimization, as the address+offset is
now rematerializeable, which can be generated on the Wasm stack,
without using any "registers" which are emulated by local
variables on Wasm. I don't know how to do benchmarks on Wasm. At
least, cmd/go binary size shrinks 9K.
Fixes#25966.
Change-Id: I01e5869515d6a3942fccdcb857f924a866876e57
Reviewed-on: https://go-review.googlesource.com/120599
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Richard Musiol <neelance@gmail.com>
For non-unit increment, loopbce checks to see if the
increment evenly divides the difference between (constant)
loop start and end. This test panics when the increment
is zero.
Fix: check for zero, if found, don't optimize the loop.
Also added missing copyright notice to loopbce.go.
Fixes#26043.
Change-Id: I5f460104879cacc94481949234c9ce8c519d6380
Reviewed-on: https://go-review.googlesource.com/120759
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If expanding an inline function body required lazily expanding a
package-scoped type whose identifier was shadowed within the function
body, the lazy expansion would instead overwrite the local symbol
definition instead of the package-scoped symbol. This was due to
importsym using s.Def instead of s.PkgDef.
Unfortunately, this is yet another consequence of the current awkward
scope handling code.
Passes toolstash-check.
Fixes#25984.
Change-Id: Ia7033e1749a883e6e979c854d4b12b0b28083dd8
Reviewed-on: https://go-review.googlesource.com/120456
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
MOVWconst's AuxInt is Int32. SSA check complains if the AuxInt
does not fit in int32. Convert uint32 to int32 to make it happy.
The generated code is unchanged. MOVW only cares low 32 bits.
Passes "toolstash -cmp" std cmd for ARM.
Fixes#25993.
Change-Id: I2b6532c9c285ea6d89652505fb7c553f85a98864
Reviewed-on: https://go-review.googlesource.com/120335
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Adds the appropriate check to inl.go.
Includes tests of both -race+go:norace and plain go:norace.
Fixes#24651.
Change-Id: Id806342430c20baf4679a985d12eea3b677092e0
Reviewed-on: https://go-review.googlesource.com/119195
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Inlining of switch statements into a RETURNed expression
can sometimes lead to the switch being walked twice, which
results in a miscompiled switch statement. The bug depends
on:
1) multiple results
2) named results
3) a return statement whose expression includes a call to a
function containing a switch statement that is inlined.
It may also be significant that the default case of that
switch is a panic(), though that's not proven.
Rearranged the walk case for ORETURN so that double walks are
not possible. Added a test, because this is so fiddly.
Added a check against double walks, verified that it fires
w/o other fix.
Fixes#25776.
Change-Id: I2d594351fa082632512ef989af67eb887059729b
Reviewed-on: https://go-review.googlesource.com/118318
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Ensure that compiler error suggestions after case insensitive
field lookups don't mistakenly reported unexported fields if
those fields aren't in the local package being processed.
Fixes#25727
Change-Id: Icae84388c2a82c8cb539f3d43ad348f50a644caa
Reviewed-on: https://go-review.googlesource.com/117755
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The original fix (https://go-review.googlesource.com/c/go/+/35831)
for this issue was incorrect as it reported cycles in cases where
it shouldn't.
Instead, use a different approach: A type cycle containing aliases
is only a cycle if there are no type definitions. As soon as there
is a type definition, alias expansion terminates and there is no
cycle.
Approach: Split sprint_depchain into two non-recursive and more
easily understandable functions (cycleFor and cycleTrace),
and use those instead for cycle reporting. Analyze the cycle
returned by cycleFor before issueing an alias cycle error.
Also: Removed original fix (main.go) which introduced a separate
crash (#23823).
Fixes#18640.
Fixes#23823.
Fixes#24939.
Change-Id: Ic3707a9dec40a71dc928a3e49b4868c5fac3d3b7
Reviewed-on: https://go-review.googlesource.com/118078
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The wasm archtecture was missing a rule to handle OffPtr with a
negative offset. This commit makes it so OffPtr always gets lowered
to I64AddConst.
Fixes#25741
Change-Id: I1d48e2954e3ff31deb8cba9a9bf0cab7c4bab71a
Reviewed-on: https://go-review.googlesource.com/116595
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
In the old binary export format, parameter names for parameter lists
which contained only types where never written, so this problem didn't
come up.
Fixes#25101.
Change-Id: Ia8b817f7f467570b05f88d584e86b6ef4acdccc6
Reviewed-on: https://go-review.googlesource.com/116376
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The stack frame includes the callee args section. At the point where
we were checking the frame size, that part of the frame had not been
computed yet. Move the check later so we can include the callee args size.
Fixes#20780
Update #25507
Change-Id: Iab97cb89b3a24f8ca19b9123ef2a111d6850c3fe
Reviewed-on: https://go-review.googlesource.com/115195
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Before the CL 115277 we did not run the test on Windows,
so let's just go back to not running the test on Windows.
There is nothing OS-specific about this test,
so skipping it on Windows doesn't seem like a big deal.
Updates #25693Fixes#25586
Change-Id: I1eb3e158b322d73e271ef388f8c6e2f2af0a0729
Reviewed-on: https://go-review.googlesource.com/115857
Run-TryBot: Yury Smolsky <yury@smolsky.by>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL removes the rundircmpout action completely
because it is not used anywhere.
The run case already looks for output files. Rename the cmpout action
mentioned in tests to the run action and remove "cmpout" from run.go.
Change-Id: I835ceb70082927f8e9360e0ea0ba74f296363ab3
Reviewed-on: https://go-review.googlesource.com/115575
Run-TryBot: Yury Smolsky <yury@smolsky.by>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
To allow testing of fixedbugs/bug345.go in Go,
a new flag -n is introduced. This flag disables setting
of relative path for local imports and imports search path
to current dir, namely -D . -I . are not passed to the compiler.
Error regexps are fixed to allow running the test in temp directory.
This change eliminates the last place where Perl
script "errchk" was used.
Fixes#25586.
Change-Id: If085f466e6955312d77315f96d3ef1cb68495aef
Reviewed-on: https://go-review.googlesource.com/115277
Run-TryBot: Yury Smolsky <yury@smolsky.by>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When we deadcode-remove a block which is a write barrier test,
remove that block from the list of write barrier test blocks.
Fixes#25516
Change-Id: I1efe732d5476003eab4ad6bf67d0340d7874ff0c
Reviewed-on: https://go-review.googlesource.com/115037
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Extend stack frame limit of 1GB to include large argument/return areas.
Argument/return areas are part of the parent frame, not the frame itself,
so they need to be handled separately.
Fixes#25507.
Change-Id: I309298a58faee3e7c1dac80bd2f1166c82460087
Reviewed-on: https://go-review.googlesource.com/115036
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change enables bug248 to be tested with Go code.
For that, it adds a flag -1 to error check and run directory
with one package failing compilation prior the last package
which should be run.
Specifically, the "p" package in bug1.go file was renamed into "q"
to compile them in separate steps,
bug2.go and bug3.go files were reordered,
bug2.go was changed into non-main package.
Updates #25586.
Change-Id: Ie47aacd56ebb2ce4eac66c792d1a53e1e30e637c
Reviewed-on: https://go-review.googlesource.com/114818
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This test measures "line churn" which was minimized to help
improve the debugger experience. With proper is_stmt markers,
this is no longer necessary, and it is more accurate (for
profiling) to allow line numbers to vary willy-nilly.
"Debugger experience" is now better measured by
cmd/compile/internal/ssa/debug_test.go
This CL made the obsoleting change:
https://go-review.googlesource.com/c/go/+/102435
Change-Id: I874ab89f3b243b905aaeba7836118f632225a667
Reviewed-on: https://go-review.googlesource.com/113155
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Don't do direct loads from argument slots if the sizes don't match.
This prevents us from loading from a float32 using a uint64 load
during expressions like uint64(math.float32Bits(f)) where f is a float32 arg.
Fixes#25322
Change-Id: I3887d76f78c844ba546243e7721d811c3d4a9700
Reviewed-on: https://go-review.googlesource.com/112637
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The general policy for the current state of js/wasm is that it only
has to support tests that are also supported by nacl.
The test nilptr3.go makes assumptions about which nil checks can be
removed. Since WebAssembly does not signal on reading a null pointer,
all nil checks have to be explicit.
Updates #18892
Change-Id: I06a687860b8d22ae26b1c391499c0f5183e4c485
Reviewed-on: https://go-review.googlesource.com/110096
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We currently rewrite
(TESTQ (MOVQconst [c] x)) into (TESTQconst [c] x)
and (TESTQconst [-1] x) into (TESTQ x x)
if x is a (MOVQconst [-1]) we will be stuck in the endless rewrite loop.
Don't perform the rewrite in such cases.
Fixes#25006
Change-Id: I77f561ba2605fc104f1e5d5c57f32e9d67a2c000
Reviewed-on: https://go-review.googlesource.com/108879
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This triggers three times while building std,
once in image/png and twice in go/internal/gccgoimporter.
There are no instances in std in which a more aggressive
optimization would have triggered.
This doesn't necessarily avoid an allocation,
because escape analysis is already able in many cases
to use a temporary backing for the string,
but it does at a minimum avoid the runtime call and copy.
Fixes#24937
Change-Id: I7019e85638ba8cd7e2f03890e672558b858579bc
Reviewed-on: https://go-review.googlesource.com/108035
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Due to some recent optimizations related to the compare
instruction, DS-form load instructions started to be used
to load 8-byte go.strings. This can cause link time errors
if the go.string is not aligned to 4 bytes.
For DS-form instructions, the value in the offset field must
be a multiple of 4. If the offset is known at the time the
rules are processed, a DS-form load will not be chosen. But for
go.strings, the offset is not known at that time, but a
relocation is generated indicating that the linker should fill
in the DS relocation. When the linker tries to fill in the
relocation, if the offset is not aligned properly, a link error
will occur.
To fix this, when loading a go.string using MOVDload, the full
address of the go.string is generated and loaded into the base
register. Then the go.string is loaded with a 0 offset field.
Added a testcase that reproduces this problem.
Fixes#24799
Change-Id: I6a154e8e1cba64eae290be0fbcb608b75884ecdd
Reviewed-on: https://go-review.googlesource.com/107855
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
I was wrong. There was a need to loop here.
Fixes#24761
Change-Id: If13b3ab72febde930bdaebdddd1c05e0d0446020
Reviewed-on: https://go-review.googlesource.com/105615
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The check was previously disallowing package main from even importing
a non-function symbol named "main".
Fixes#24801.
Change-Id: I849b9713890429f0a16860ef16b5dc7e970d04a4
Reviewed-on: https://go-review.googlesource.com/106120
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Also, when statically building itabs, compare *types.Sym instead of
name alone so that method sets with duplicate non-exported methods are
handled correctly.
Fixes#24693.
Change-Id: I2db8a3d6e80991a71fef5586a15134b6de116269
Reviewed-on: https://go-review.googlesource.com/105039
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Previously, constant pointer-typed expressions could use either Mpint
or NilVal as their Val depending on their construction, but const.go
expects each type to have a single corresponding Val kind.
This CL changes pointer-typed expressions to exclusively use Mpint.
Fixes#21221.
Change-Id: I6ba36c9b11eb19a68306f0b296acb11a8c254c41
Reviewed-on: https://go-review.googlesource.com/105315
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Don't report errors if we don't have a correct type switch
guard; instead ignore it and leave it to the type-checker
to report the error. This leads to better error messages
concentrating on the type switch guard rather than errors
around (confusing) syntactic details.
Also clean up some code setting up AssertExpr (they never
have a nil Type field) and remove some incorrect TODOs.
Fixes#24470.
Change-Id: I69512f36e0417e3b5ea9c8856768e04b19d654a8
Reviewed-on: https://go-review.googlesource.com/103615
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When test/run script was removed, these two tests
were changed to be executed by test/run.go.
Because errchk does not exit with non-zero status on
errors, they were silently failing for a while.
This change makes 2 things:
1. Compile tested packages in GOROOT/test to match older runner script
behavior (strictly required only in bug345, optional in bug248)
2. Check command output with "(?m)^BUG" regexp.
It approximates older `grep -q '^BUG' that was used before.
See referenced issue for detailed explanation.
Fixes#24629
Change-Id: Ie888dcdb4e25cdbb19d434bbc5cb03eb633e9ee8
Reviewed-on: https://go-review.googlesource.com/104095
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 38338 introduced SSA rules to optimize two types of pointer equality
tests: a pointer compared with itself, and comparison of addresses taken
of two symbols which may have the same base. This patch adds rules to
apply the same optimization to pointer inequality tests, which also ensures
that two pointers to zero-width types cannot be both equal and unequal
at the same time.
Fixes#24503.
Change-Id: Ic828aeb86ae2e680caf66c35f4c247674768a9ba
Reviewed-on: https://go-review.googlesource.com/102275
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In expandmeth, we call expand1/expand0 to build a list of all
candidate methods to promote, and then we use dotpath to prune down
which names actually resolve to a promoted method and how.
However, previously we still computed "followsptr" based on the
expand1/expand0 traversal (which is depth-first), rather than
dotpath (which is breadth-first). The result is that we could
sometimes end up miscomputing whether a particular promoted method
involves a pointer traversal, which could result in bad code
generation for method trampolines.
Fixes#24547.
Change-Id: I57dc014466d81c165b05d78b98610dc3765b7a90
Reviewed-on: https://go-review.googlesource.com/102618
Reviewed-by: Robert Griesemer <gri@golang.org>
The atomic add instructions modify the condition code and so need to
be marked as clobbering flags.
Fixes#24449.
Change-Id: Ic69c8d775fbdbfb2a56c5e0cfca7a49c0d7f6897
Reviewed-on: https://go-review.googlesource.com/101455
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently, order desugars map assignment operations like
m[k] op= r
into
m[k] = m[k] op r
which in turn is transformed during walk into:
tmp := *mapaccess(m, k)
tmp = tmp op r
*mapassign(m, k) = tmp
However, this is suboptimal, as we could instead produce just:
*mapassign(m, k) op= r
One complication though is if "r == 0", then "m[k] /= r" and "m[k] %=
r" will panic, and they need to do so *before* calling mapassign,
otherwise we may insert a new zero-value element into the map.
It would be spec compliant to just emit the "r != 0" check before
calling mapassign (see #23735), but currently these checks aren't
generated until SSA construction. For now, it's simpler to continue
desugaring /= and %= into two map indexing operations.
Fixes#23661.
Change-Id: I46e3739d9adef10e92b46fdd78b88d5aabe68952
Reviewed-on: https://go-review.googlesource.com/91557
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
When the slice/string length is very large,
probably artifically large as in CL 97523,
adding BX (length) to R11 (pointer) overflows.
As a result, checking DI < R11 yields the wrong result.
Since they will be equal when the loop is done,
just check DI != R11 instead.
Yes, the pointer itself could overflow, but if that happens,
something else has gone pretty wrong; not our concern here.
Fixes#24187
Change-Id: I2f60fc6ccae739345d01bc80528560726ad4f8c6
Reviewed-on: https://go-review.googlesource.com/97802
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
OCOMPLIT stores the pre-typechecked type in n.Right, and then moves it
to n.Type. However, it wasn't clearing n.Right, so n.Right continued
to point to the OTYPE node. (Exception: slice literals reused n.Right
to store the array length.)
When exporting inline function bodies, we don't expect to need to save
any type aliases. Doing so wouldn't be wrong per se, but it's
completely unnecessary and would just bloat the export data.
However, reexportdep (whose role is to identify types needed by inline
function bodies) uses a generic tree traversal mechanism, which visits
n.Right even for O{ARRAY,MAP,STRUCT}LIT nodes. This means it finds the
OTYPE node, and mistakenly interpreted that the type alias needs to be
exported.
The straight forward fix is to just clear n.Right when typechecking
composite literals.
Fixes#24173.
Change-Id: Ia2d556bfdd806c83695b08e18b6cd71eff0772fc
Reviewed-on: https://go-review.googlesource.com/97719
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Otherwise, the error can be confusing if one forgets or doesn't know
that the builtin is being shadowed, which is not common practice.
Fixes#22822.
Change-Id: I735393b5ce28cb83815a1c3f7cd2e7bb5080a32d
Reviewed-on: https://go-review.googlesource.com/97455
Reviewed-by: Robert Griesemer <gri@golang.org>
This change enables printing of relative column information if a
prior line directive specified a valid column. If there was no
line directive, or the line directive didn't specify a column
(or the -C flag is specified), no column information is shown in
file positions.
Implementation: Column values (and line values, for that matter)
that are zero are interpreted as "unknown". A line directive that
doesn't specify a column records that as a zero column in the
respective PosBase data structure. When computing relative columns,
a relative value is zero of the base's column value is zero.
When formatting a position, a zero column value is not printed.
To make this work without special cases, the PosBase for a file
is given a concrete (non-0:0) position 1:1 with the PosBase's
line and column also being 1:1. In other words, at the position
1:1 of a file, it's relative positions are starting with 1:1 as
one would expect.
In the package syntax, this requires self-recursive PosBases for
file bases, matching what cmd/internal/src.PosBase was already
doing. In src.PosBase, file and inlining bases also need to be
based at 1:1 to indicate "known" positions.
This change completes the cmd/compiler part of the issue below.
Fixes#22662.
Change-Id: I6c3d2dee26709581fba0d0261b1d12e93f1cba1a
Reviewed-on: https://go-review.googlesource.com/97375
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
We accidentally overlooked needing to still visit Ninit for OIF
statements with constant conditions in golang.org/cl/96778.
Fixes#24120.
Change-Id: I5b341913065ff90e1163fb872b9e8d47e2a789d2
Reviewed-on: https://go-review.googlesource.com/97475
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Extend cmd/internal/src.PosBase to track column information,
and adjust the meaning of the PosBase position to mean the
position at which the PosBase's relative (line, col) position
starts (rather than indicating the position of the //line
directive). Because this semantic change is made in the
compiler's noder, it doesn't affect the logic of src.PosBase,
only its test setup (where PosBases are constructed with
corrected incomming positions). In short, src.PosBase now
matches syntax.PosBase with respect to the semantics of
src.PosBase.pos.
For #22662.
Change-Id: I5b1451cb88fff3f149920c2eec08b6167955ce27
Reviewed-on: https://go-review.googlesource.com/96535
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When we go from a branch block to a plain block, reset the
branch prediction bit. Downstream passes asssume that if the
branch prediction is set, then the block has 2 successors.
Fixes#23504
Change-Id: I2898ec002228b2e34fe80ce420c6939201c0a5aa
Reviewed-on: https://go-review.googlesource.com/88955
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This replaces the contiguous heap arena mapping with a potentially
sparse mapping that can support heap mappings anywhere in the address
space.
This has several advantages over the current approach:
* There is no longer any limit on the size of the Go heap. (Currently
it's limited to 512GB.) Hence, this fixes#10460.
* It eliminates many failures modes of heap initialization and
growing. In particular it eliminates any possibility of panicking
with an address space conflict. This can happen for many reasons and
even causes a low but steady rate of TSAN test failures because of
conflicts with the TSAN runtime. See #16936 and #11993.
* It eliminates the notion of "non-reserved" heap, which was added
because creating huge address space reservations (particularly on
64-bit) led to huge process VSIZE. This was at best confusing and at
worst conflicted badly with ulimit -v. However, the non-reserved
heap logic is complicated, can race with other mappings in non-pure
Go binaries (e.g., #18976), and requires that the entire heap be
either reserved or non-reserved. We currently maintain the latter
property, but it's quite difficult to convince yourself of that, and
hence difficult to keep correct. This logic is still present, but
will be removed in the next CL.
* It fixes problems on 32-bit where skipping over parts of the address
space leads to mapping huge (and never-to-be-used) metadata
structures. See #19831.
This also completely rewrites and significantly simplifies
mheap.sysAlloc, which has been a source of many bugs. E.g., #21044,
#20259, #18651, and #13143 (and maybe #23222).
This change also makes it possible to allocate individual objects
larger than 512GB. As a result, a few tests that expected huge
allocations to fail needed to be changed to make even larger
allocations. However, at the moment attempting to allocate a humongous
object may cause the program to freeze for several minutes on Linux as
we fall back to probing every page with addrspace_free. That logic
(and this failure mode) will be removed in the next CL.
Fixes#10460.
Fixes#22204 (since it rewrites the code involved).
This slightly slows down compilebench and the x/benchmarks garbage
benchmark.
name old time/op new time/op delta
Template 184ms ± 1% 185ms ± 1% ~ (p=0.065 n=10+9)
Unicode 86.9ms ± 3% 86.3ms ± 1% ~ (p=0.631 n=10+10)
GoTypes 599ms ± 0% 602ms ± 0% +0.56% (p=0.000 n=10+9)
Compiler 2.87s ± 1% 2.89s ± 1% +0.51% (p=0.002 n=9+10)
SSA 7.29s ± 1% 7.25s ± 1% ~ (p=0.182 n=10+9)
Flate 118ms ± 2% 118ms ± 1% ~ (p=0.113 n=9+9)
GoParser 147ms ± 1% 148ms ± 1% +1.07% (p=0.003 n=9+10)
Reflect 401ms ± 1% 404ms ± 1% +0.71% (p=0.003 n=10+9)
Tar 175ms ± 1% 175ms ± 1% ~ (p=0.604 n=9+10)
XML 209ms ± 1% 210ms ± 1% ~ (p=0.052 n=10+10)
(https://perf.golang.org/search?q=upload:20171231.4)
name old time/op new time/op delta
Garbage/benchmem-MB=64-12 2.23ms ± 1% 2.25ms ± 1% +0.84% (p=0.000 n=19+19)
(https://perf.golang.org/search?q=upload:20171231.3)
Relative to the start of the sparse heap changes (starting at and
including "runtime: fix various contiguous bitmap assumptions"),
overall slowdown is roughly 1% on GC-intensive benchmarks:
name old time/op new time/op delta
Template 183ms ± 1% 185ms ± 1% +1.32% (p=0.000 n=9+9)
Unicode 84.9ms ± 2% 86.3ms ± 1% +1.65% (p=0.000 n=9+10)
GoTypes 595ms ± 1% 602ms ± 0% +1.19% (p=0.000 n=9+9)
Compiler 2.86s ± 0% 2.89s ± 1% +0.91% (p=0.000 n=9+10)
SSA 7.19s ± 0% 7.25s ± 1% +0.75% (p=0.000 n=8+9)
Flate 117ms ± 1% 118ms ± 1% +1.10% (p=0.000 n=10+9)
GoParser 146ms ± 2% 148ms ± 1% +1.48% (p=0.002 n=10+10)
Reflect 398ms ± 1% 404ms ± 1% +1.51% (p=0.000 n=10+9)
Tar 173ms ± 1% 175ms ± 1% +1.17% (p=0.000 n=10+10)
XML 208ms ± 1% 210ms ± 1% +0.62% (p=0.011 n=10+10)
[Geo mean] 369ms 373ms +1.17%
(https://perf.golang.org/search?q=upload:20180101.2)
name old time/op new time/op delta
Garbage/benchmem-MB=64-12 2.22ms ± 1% 2.25ms ± 1% +1.51% (p=0.000 n=20+19)
(https://perf.golang.org/search?q=upload:20180101.3)
Change-Id: I5daf4cfec24b252e5a57001f0a6c03f22479d0f0
Reviewed-on: https://go-review.googlesource.com/85887
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The scanner assumed that ~ really meant ^, which may be helpful when
coming from C. But ~ is not a valid Go token, and pretending that it
should be ^ can lead to confusing error messages. Better to be upfront
about it and complain about the invalid character in the first place.
This was code "inherited" from the original yacc parser which was
derived from a C compiler. It's 10 years later and we can probably
assume that people are less confused about C and Go.
Fixes#23587.
Change-Id: I8d8f9b55b0dff009b75c1530d729bf9092c5aea6
Reviewed-on: https://go-review.googlesource.com/94160
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Assume that an expression that is not a function call in a defer/go
statement is indeed a function that is just missing its invocation.
Report the error but continue with a sane syntax tree.
Fixes#23586.
Change-Id: Ib45ebac57c83b3e39ae4a1b137ffa291dec5b50d
Reviewed-on: https://go-review.googlesource.com/94156
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Previously, if we typechecked a statement like
var x bool = p1.f == p2.f && p1.g == p2.g
we would correctly update the '&&' node's type from 'untyped bool' to
'bool', but the '==' nodes would stay 'untyped bool'. This is
inconsistent, and caused consistency checks during walk to fail.
This CL doesn't pass toolstash because it seems to slightly affect the
register allocator's heuristics. (Presumably 'untyped bool's were
previously making it all the way through SSA?)
Fixes#23414.
Change-Id: Ia85f8cfc69b5ba35dfeb157f4edf57612ecc3285
Reviewed-on: https://go-review.googlesource.com/94022
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Per the language spec clarification in https://golang.org/cl/14727.
Updates #12576
Updates #12621
Change-Id: I1e459c3c11a571bd29582761faacaa9ca3178ba6
Reviewed-on: https://go-review.googlesource.com/91895
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The sub-word shifts need to sign-extend before shifting, to avoid
bringing in data from higher in the argument.
Fixes#23812
Change-Id: I0a95a0b49c48f3b40b85765bb4a9bb492be0cd73
Reviewed-on: https://go-review.googlesource.com/93716
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Fixes#23732
Disambiguate "too few" or "too many" values in struct
initializer messages by reporting the name of the literal.
After:
issue23732.go:27:3: too few values in Foo literal
issue23732.go:34:12: too many values in Bar literal
issue23732.go:40:6: too few values in Foo literal
issue23732.go:40:12: too many values in Bar literal
Change-Id: Ieca37298441d907ac78ffe960c5ab55741a362ef
Reviewed-on: https://go-review.googlesource.com/93277
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Now that the buffered write barrier is implemented for all
architectures, we can remove the old eager write barrier
implementation. This CL removes the implementation from the runtime,
support in the compiler for calling it, and updates some compiler
tests that relied on the old eager barrier support. It also makes sure
that all of the useful comments from the old write barrier
implementation still have a place to live.
Fixes#22460.
Updates #21640 since this fixes the layering concerns of the write
barrier (but not the other things in that issue).
Change-Id: I580f93c152e89607e0a72fe43370237ba97bae74
Reviewed-on: https://go-review.googlesource.com/92705
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When loading multiple elements of an array into a single register,
make sure we treat them as unsigned. When treated as signed, the
upper bits might all be set, causing the shift-or combo to clobber
the values higher in the register.
Fixes#23719.
Change-Id: Ic87da03e9bd0fe2c60bb214b99f846e4e9446052
Reviewed-on: https://go-review.googlesource.com/92335
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
The fix is CL 91035.
Build only with gccgo at the moment, as it hits issue #23546.
Updates #23545.
Change-Id: I3a1367bb31b04773d31f71016f8fd7bd1855d7b5
Reviewed-on: https://go-review.googlesource.com/89735
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The compiler allows code to have multiple differently-typed views of a
single argument. For instance, if we have
func f(x float64) {
y := *(*int64)(unsafe.Pointer(&x))
...
}
Then in SSA we get two OpArg ops, one with float64 type and one with
int64 type.
The compiler will try to reuse argument slots for spill slots. It
checks that the argument slot is dead by consulting an interference
graph.
When building the interference graph, we normally ignore cross-type
edges because the values on either end of that edge can't be allocated
to the same slot. (This is just a space-saving optimization.) This
rule breaks down when one of the values is an argument, because of the
multiple views described above. If we're spilling a float64, it is not
enough that the float64 version of x is dead; the int64 version of x
has to be dead also.
Remove the optimization of not recording interference edges if types
don't match. That optimization is incorrect if one of the values
connected by the edge is an argument.
Fixes#23522
Change-Id: I361f85d80fe3bc7249014ca2c3ec887c3dc30271
Reviewed-on: https://go-review.googlesource.com/89335
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A Select Op could produce a value with upper 32 bits NOT zeroed,
for example, Div32 is lowered to (Select0 (DIVL x y)).
In theory, we could look into the argument of a Select to decide
whether the upper bits are zeroed. As it is late in release cycle,
just disable this optimization for Select for now.
Fixes#23305.
Change-Id: Icf665a2af9ccb0a7ba0ae00c683c9e349638bf85
Reviewed-on: https://go-review.googlesource.com/85736
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
My previous fix for issue 23179 was incomplete; it turns out that if
an unnamed parameter is below a specific size threshold, it gets
register-promoted away by the compiler (hence not encountered during
some parts of DWARF inline info processing), but if it is sufficiently
large, it is allocated to the stack as a named variable and treated as
a regular parameter by DWARF generation. Interestingly, something in
the ppc64le build of k8s causes an unnamed parameter to be retained
(where on amd64 it is deleted), meaning that this wasn't caught in my
amd64 testing.
The fix is to insure that "_" params are treated in the same way that
"~r%d" return temps are when matching up post-optimization inlined
routine params with pre-inlining declarations. I've also updated the
test case to include a "_" parameter with a very large size, which
also triggers the bug on amd64.
Fixes#23179.
Change-Id: I961c84cc7a873ad3f8f91db098a5e13896c4856e
Reviewed-on: https://go-review.googlesource.com/84975
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The helper routine for returning pre-inlining parameter declarations
wasn't properly handling the case where you have more than one
parameter named "_" in a function signature; this triggered a map
collision later on when the function was inlined and DWARF was
generated for the inlined routine instance.
Fixes#23179.
Change-Id: I12e5d6556ec5ce08e982a6b53666a4dcc1d22201
Reviewed-on: https://go-review.googlesource.com/84755
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
We can't currently inline functions that contain closures anyway, so
just delete this budgeting code for now. Re-enable once we can (if
ever) inline functions with nested closures.
Updates #15561.
Fixes#23093.
Change-Id: Idc5f8e042ccfcc8921022e58d3843719d4ab821e
Reviewed-on: https://go-review.googlesource.com/83538
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Pointer arithemetic is done mod 2^32 on 386, so we can just
drop the high bits of any large constant offsets.
The bounds check will make sure wraparounds are never observed.
Fixes#21655
Change-Id: I68ae5bbea9f02c73968ea2b21ca017e5ecb89223
Reviewed-on: https://go-review.googlesource.com/82675
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Make sure that when we're assigning to a map, we evaluate the
right-hand side before we attempt to insert into the map.
We used to evaluate the left-hand side to a pointer-to-slot-in-bucket
(which as a side effect does len(m)++), then evaluate the right-hand side,
then do the assignment. That clearly isn't correct when the right-hand side
might panic.
Fixes#22881
Change-Id: I42a62870ff4bf480568c9bdbf0bb18958962bdf0
Reviewed-on: https://go-review.googlesource.com/81817
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The DWARF inline info generation hooks weren't properly
handling unused auto vars in certain cases, triggering an assert (now
fixed). Also with this change, introduce a new autom "flavor" to
use for autom entries that are added to insure that a specific
auto type makes it into the linker (this is a follow-on to the fix
for 22941).
Fixes#22962.
Change-Id: I7a2d8caf47f6ca897b12acb6a6de0eb25f5cac8f
Reviewed-on: https://go-review.googlesource.com/81557
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The code that generates the list of DWARF variables for a function
(params and autos) will emit a "no-location" entry in the DWARF for a
user var that appears in the original pre-optimization version of the
function but is no longer around when optimization is complete. The
intent is that if a GDB user types "print foo" (where foo has been
optimized out), the response will be "<optimized out>" as opposed to
"there is no such variable 'foo'). This change fixes said code to
include vars on the autom list for the function, to insure that the
type symbol for the variable makes it to the linker.
Fixes#22941.
Change-Id: Id29f1f39d68fbb798602dfd6728603040624fc41
Reviewed-on: https://go-review.googlesource.com/81415
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
ORANGE node's Right node is the expression it is ranging over,
which is evaluated before the loop. In the escape analysis,
we should walk this node without loop depth incremented.
Fixes#21709.
Change-Id: Idc1e4c76e39afb5a344d85f6b497930a488ce5cf
Reviewed-on: https://go-review.googlesource.com/80740
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
For "type T = U" we were accidentally emitting a #define for "U__size"
instead of "T__size".
Fixes#22877.
Change-Id: I5ed6757d697753ed6d944077c16150759f6e1285
Reviewed-on: https://go-review.googlesource.com/80759
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
