mirror of
https://github.com/golang/go
synced 2024-11-26 17:56:55 -07:00
28f4ea16a2
23 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Paul E. Murphy
|
5cdb132228 |
cmd/compile/internal/ssa: improve masking codegen on PPC64
Generate RLDIC[LR] instead of MOVD mask, Rx; AND Rx, Ry, Rz. This helps reduce code size, and reduces the latency caused by the constant load. Similarly, for smaller-than-register values, truncate constants which exceed the range of the value's type to avoid needing to load a constant. Change-Id: I6019684795eb8962d4fd6d9585d08b17c15e7d64 Reviewed-on: https://go-review.googlesource.com/c/go/+/515576 Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com> Reviewed-by: Dmitri Shuralyov <dmitshur@google.com> Run-TryBot: Paul Murphy <murp@ibm.com> TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: Cherry Mui <cherryyz@google.com> |
||
Keith Randall
|
611706b171 |
cmd/compile: don't use BTS when OR works, add direct memory BTS operations
Stop using BTSconst and friends when ORLconst can be used instead. OR can be issued by more function units than BTS can, so it could lead to better IPC. OR might take a few more bytes to encode, but not a lot more. Still use BTSconst for cases where the constant otherwise wouldn't fit and would require a separate movabs instruction to materialize the constant. This happens when setting bits 31-63 of 64-bit targets. Add BTS-to-memory operations so we don't need to load/bts/store. Fixes #61694 Change-Id: I00379608df8fb0167cb01466e97d11dec7c1596c Reviewed-on: https://go-review.googlesource.com/c/go/+/515755 Reviewed-by: Keith Randall <khr@google.com> Run-TryBot: Keith Randall <khr@golang.org> TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: Cherry Mui <cherryyz@google.com> |
||
|
Paul E. Murphy
|
5e4000ad7f |
cmd/compile: on PPC64, fix sign/zero extension when masking
(ANDCCconst [y] (MOV.*reg x)) should only be merged when zero extending. Otherwise, sign bits are lost on negative values. (ANDCCconst [0xFF] (MOVBreg x)) should be simplified to a zero extension of x. Likewise for the MOVHreg variant. Fixes #61297 Change-Id: I04e4fd7dc6a826e870681f37506620d48393698b Reviewed-on: https://go-review.googlesource.com/c/go/+/508775 TryBot-Result: Gopher Robot <gobot@golang.org> Run-TryBot: Paul Murphy <murp@ibm.com> Reviewed-by: Bryan Mills <bcmills@google.com> Reviewed-by: Cherry Mui <cherryyz@google.com> |
||
eric fang
|
ddc7d2a80c |
cmd/compile: add late lower pass for last rules to run
Usually optimization rules have corresponding priorities, some need to
be run first, some run next, and some run last, which produces the best
code. But currently our optimization rules have no priority, this CL
adds a late lower pass that runs those rules that need to be run at last,
such as split unreasonable constant folding. This pass can be seen as
the second round of the lower pass.
For example:
func foo(a, b uint64) uint64 {
d := a+0x1234568
d1 := b+0x1234568
return d&d1
}
The code generated by the master branch:
0x0004 00004 ADD $19088744, R0, R2 // movz+movk+add
0x0010 00016 ADD $19088744, R1, R1 // movz+movk+add
0x001c 00028 AND R1, R2, R0
This is because the current constant folding optimization rules do not
take into account the range of constants, causing the constant to be
loaded repeatedly. This CL splits these unreasonable constants folding
in the late lower pass. With this CL the generated code:
0x0004 00004 MOVD $19088744, R2 // movz+movk
0x000c 00012 ADD R0, R2, R3
0x0010 00016 ADD R1, R2, R1
0x0014 00020 AND R1, R3, R0
This CL also adds constant folding optimization for ADDS instruction.
In addition, in order not to introduce the codegen regression, an
optimization rule is added to change the addition of a negative number
into a subtraction of a positive number.
go1 benchmarks:
name old time/op new time/op delta
BinaryTree17-8 1.22s ± 1% 1.24s ± 0% +1.56% (p=0.008 n=5+5)
Fannkuch11-8 1.54s ± 0% 1.53s ± 0% -0.69% (p=0.016 n=4+5)
FmtFprintfEmpty-8 14.1ns ± 0% 14.1ns ± 0% ~ (p=0.079 n=4+5)
FmtFprintfString-8 26.0ns ± 0% 26.1ns ± 0% +0.23% (p=0.008 n=5+5)
FmtFprintfInt-8 32.3ns ± 0% 32.9ns ± 1% +1.72% (p=0.008 n=5+5)
FmtFprintfIntInt-8 54.5ns ± 0% 55.5ns ± 0% +1.83% (p=0.008 n=5+5)
FmtFprintfPrefixedInt-8 61.5ns ± 0% 62.0ns ± 0% +0.93% (p=0.008 n=5+5)
FmtFprintfFloat-8 72.0ns ± 0% 73.6ns ± 0% +2.24% (p=0.008 n=5+5)
FmtManyArgs-8 221ns ± 0% 224ns ± 0% +1.22% (p=0.008 n=5+5)
GobDecode-8 1.91ms ± 0% 1.93ms ± 0% +0.98% (p=0.008 n=5+5)
GobEncode-8 1.40ms ± 1% 1.39ms ± 0% -0.79% (p=0.032 n=5+5)
Gzip-8 115ms ± 0% 117ms ± 1% +1.17% (p=0.008 n=5+5)
Gunzip-8 19.4ms ± 1% 19.3ms ± 0% -0.71% (p=0.016 n=5+4)
HTTPClientServer-8 27.0µs ± 0% 27.3µs ± 0% +0.80% (p=0.008 n=5+5)
JSONEncode-8 3.36ms ± 1% 3.33ms ± 0% ~ (p=0.056 n=5+5)
JSONDecode-8 17.5ms ± 2% 17.8ms ± 0% +1.71% (p=0.016 n=5+4)
Mandelbrot200-8 2.29ms ± 0% 2.29ms ± 0% ~ (p=0.151 n=5+5)
GoParse-8 1.35ms ± 1% 1.36ms ± 1% ~ (p=0.056 n=5+5)
RegexpMatchEasy0_32-8 24.5ns ± 0% 24.5ns ± 0% ~ (p=0.444 n=4+5)
RegexpMatchEasy0_1K-8 131ns ±11% 118ns ± 6% ~ (p=0.056 n=5+5)
RegexpMatchEasy1_32-8 22.9ns ± 0% 22.9ns ± 0% ~ (p=0.905 n=4+5)
RegexpMatchEasy1_1K-8 126ns ± 0% 127ns ± 0% ~ (p=0.063 n=4+5)
RegexpMatchMedium_32-8 486ns ± 5% 483ns ± 0% ~ (p=0.381 n=5+4)
RegexpMatchMedium_1K-8 15.4µs ± 1% 15.5µs ± 0% ~ (p=0.151 n=5+5)
RegexpMatchHard_32-8 687ns ± 0% 686ns ± 0% ~ (p=0.103 n=5+5)
RegexpMatchHard_1K-8 20.7µs ± 0% 20.7µs ± 1% ~ (p=0.151 n=5+5)
Revcomp-8 175ms ± 2% 176ms ± 3% ~ (p=1.000 n=5+5)
Template-8 20.4ms ± 6% 20.1ms ± 2% ~ (p=0.151 n=5+5)
TimeParse-8 112ns ± 0% 113ns ± 0% +0.97% (p=0.016 n=5+4)
TimeFormat-8 156ns ± 0% 145ns ± 0% -7.14% (p=0.029 n=4+4)
Change-Id: I3ced26e89041f873ac989586514ccc5ee09f13da
Reviewed-on: https://go-review.googlesource.com/c/go/+/425134
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Eric Fang <eric.fang@arm.com>
|
||
Jake Ciolek
|
732f6fa9d5 |
cmd/compile: use ANDL for small immediates
We can rewrite ANDQ with an immediate fitting in 32bit with an ANDL, which is shorter to encode. Looking at Go binary itself, before the change there was: ANDL: 2337 ANDQ: 4476 After the change: ANDL: 3790 ANDQ: 3024 So we got rid of 1452 ANDQs This makes the Linux x86_64 binary 0.03% smaller. There seems to be an impact on performance. Intel Cascade Lake benchmarks (with perflock): name old time/op new time/op delta BinaryTree17-8 1.91s ± 1% 1.89s ± 1% -1.22% (p=0.000 n=21+18) Fannkuch11-8 2.34s ± 0% 2.34s ± 0% ~ (p=0.052 n=20+20) FmtFprintfEmpty-8 27.7ns ± 1% 27.4ns ± 3% ~ (p=0.497 n=21+21) FmtFprintfString-8 53.2ns ± 0% 51.5ns ± 0% -3.21% (p=0.000 n=20+19) FmtFprintfInt-8 57.3ns ± 0% 55.7ns ± 0% -2.89% (p=0.000 n=19+19) FmtFprintfIntInt-8 92.3ns ± 0% 88.4ns ± 1% -4.23% (p=0.000 n=20+21) FmtFprintfPrefixedInt-8 103ns ± 0% 103ns ± 0% +0.23% (p=0.000 n=20+21) FmtFprintfFloat-8 147ns ± 0% 148ns ± 0% +0.75% (p=0.000 n=20+21) FmtManyArgs-8 384ns ± 0% 381ns ± 0% -0.63% (p=0.000 n=21+21) GobDecode-8 3.86ms ± 1% 3.88ms ± 1% +0.52% (p=0.000 n=20+21) GobEncode-8 2.77ms ± 1% 2.77ms ± 0% ~ (p=0.078 n=21+21) Gzip-8 168ms ± 1% 168ms ± 0% +0.24% (p=0.000 n=20+20) Gunzip-8 25.1ms ± 0% 24.3ms ± 0% -3.03% (p=0.000 n=21+21) HTTPClientServer-8 61.4µs ± 8% 59.1µs ±10% ~ (p=0.088 n=20+21) JSONEncode-8 6.86ms ± 0% 6.70ms ± 0% -2.29% (p=0.000 n=20+19) JSONDecode-8 30.8ms ± 1% 30.6ms ± 1% -0.82% (p=0.000 n=20+20) Mandelbrot200-8 3.85ms ± 0% 3.85ms ± 0% ~ (p=0.191 n=16+17) GoParse-8 2.61ms ± 2% 2.60ms ± 1% ~ (p=0.561 n=21+20) RegexpMatchEasy0_32-8 48.5ns ± 2% 45.9ns ± 3% -5.26% (p=0.000 n=20+21) RegexpMatchEasy0_1K-8 139ns ± 0% 139ns ± 0% +0.27% (p=0.000 n=18+20) RegexpMatchEasy1_32-8 41.3ns ± 0% 42.1ns ± 4% +1.95% (p=0.000 n=17+21) RegexpMatchEasy1_1K-8 216ns ± 2% 216ns ± 0% +0.17% (p=0.020 n=21+19) RegexpMatchMedium_32-8 790ns ± 7% 803ns ± 8% ~ (p=0.178 n=21+21) RegexpMatchMedium_1K-8 23.5µs ± 5% 23.7µs ± 5% ~ (p=0.421 n=21+21) RegexpMatchHard_32-8 1.09µs ± 1% 1.09µs ± 1% -0.53% (p=0.000 n=19+18) RegexpMatchHard_1K-8 33.0µs ± 0% 33.0µs ± 0% ~ (p=0.610 n=21+20) Revcomp-8 348ms ± 0% 353ms ± 0% +1.38% (p=0.000 n=17+18) Template-8 42.0ms ± 1% 41.9ms ± 1% -0.30% (p=0.049 n=20+20) TimeParse-8 185ns ± 0% 185ns ± 0% ~ (p=0.387 n=20+18) TimeFormat-8 237ns ± 1% 241ns ± 1% +1.57% (p=0.000 n=21+21) [Geo mean] 35.4µs 35.2µs -0.66% name old speed new speed delta GobDecode-8 199MB/s ± 1% 198MB/s ± 1% -0.52% (p=0.000 n=20+21) GobEncode-8 277MB/s ± 1% 277MB/s ± 0% ~ (p=0.075 n=21+21) Gzip-8 116MB/s ± 1% 115MB/s ± 0% -0.25% (p=0.000 n=20+20) Gunzip-8 773MB/s ± 0% 797MB/s ± 0% +3.12% (p=0.000 n=21+21) JSONEncode-8 283MB/s ± 0% 290MB/s ± 0% +2.35% (p=0.000 n=20+19) JSONDecode-8 63.0MB/s ± 1% 63.5MB/s ± 1% +0.82% (p=0.000 n=20+20) GoParse-8 22.2MB/s ± 2% 22.3MB/s ± 1% ~ (p=0.539 n=21+20) RegexpMatchEasy0_32-8 660MB/s ± 2% 697MB/s ± 3% +5.57% (p=0.000 n=20+21) RegexpMatchEasy0_1K-8 7.36GB/s ± 0% 7.34GB/s ± 0% -0.26% (p=0.000 n=18+20) RegexpMatchEasy1_32-8 775MB/s ± 0% 761MB/s ± 4% -1.88% (p=0.000 n=17+21) RegexpMatchEasy1_1K-8 4.74GB/s ± 2% 4.74GB/s ± 0% -0.18% (p=0.020 n=21+19) RegexpMatchMedium_32-8 40.6MB/s ± 7% 39.9MB/s ± 9% ~ (p=0.191 n=21+21) RegexpMatchMedium_1K-8 43.7MB/s ± 5% 43.2MB/s ± 5% ~ (p=0.435 n=21+21) RegexpMatchHard_32-8 29.3MB/s ± 1% 29.4MB/s ± 1% +0.53% (p=0.000 n=19+18) RegexpMatchHard_1K-8 31.0MB/s ± 0% 31.0MB/s ± 0% ~ (p=0.572 n=21+20) Revcomp-8 730MB/s ± 0% 720MB/s ± 0% -1.36% (p=0.000 n=17+18) Template-8 46.2MB/s ± 1% 46.3MB/s ± 1% +0.30% (p=0.041 n=20+20) [Geo mean] 204MB/s 205MB/s +0.30% Change-Id: Iac75d0ec184a515ce0e65e19559d5fe2e9840514 Reviewed-on: https://go-review.googlesource.com/c/go/+/354970 Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com> Trust: Josh Bleecher Snyder <josharian@gmail.com> Trust: Keith Randall <khr@golang.org> Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> TryBot-Result: Go Bot <gobot@golang.org> |
||
|
Keith Randall
|
315dbd10c9 |
cmd/compile: fold double negate on arm64
Fixes #48467 Change-Id: I52305dbf561ee3eee6c1f053e555a3a6ec1ab892 Reviewed-on: https://go-review.googlesource.com/c/go/+/350910 Trust: Keith Randall <khr@golang.org> Trust: Josh Bleecher Snyder <josharian@gmail.com> Run-TryBot: Keith Randall <khr@golang.org> TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com> |
||
|
Keith Randall
|
b211fe0058 |
cmd/compile: remove bit operations that modify memory directly
These operations (BT{S,R,C}{Q,L}modify) are quite a bit slower than
other ways of doing the same thing.
Without the BTxmodify operations, there are two fallback ways the compiler
performs these operations: AND/OR/XOR operations directly on memory, or
load-BTx-write sequences. The compiler kinda chooses one arbitrarily
depending on rewrite rule application order. Currently, it uses
load-BTx-write for the Const benchmarks and AND/OR/XOR directly to memory
for the non-Const benchmarks. TBD, someone might investigate which of
the two fallback strategies is really better. For now, they are both
better than BTx ops.
name old time/op new time/op delta
BitSet-8 1.09µs ± 2% 0.64µs ± 5% -41.60% (p=0.000 n=9+10)
BitClear-8 1.15µs ± 3% 0.68µs ± 6% -41.00% (p=0.000 n=10+10)
BitToggle-8 1.18µs ± 4% 0.73µs ± 2% -38.36% (p=0.000 n=10+8)
BitSetConst-8 37.0ns ± 7% 25.8ns ± 2% -30.24% (p=0.000 n=10+10)
BitClearConst-8 30.7ns ± 2% 25.0ns ±12% -18.46% (p=0.000 n=10+10)
BitToggleConst-8 36.9ns ± 1% 23.8ns ± 3% -35.46% (p=0.000 n=9+10)
Fixes #45790
Update #45242
Change-Id: Ie33a72dc139f261af82db15d446cd0855afb4e59
Reviewed-on: https://go-review.googlesource.com/c/go/+/318149
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ben Shi <powerman1st@163.com>
|
||
Cherry Zhang
|
263e13d1f7 |
test: make codegen tests work with both ABIs
Some codegen tests were written with the assumption that arguments and results are in memory, and with a specific stack layout. With the register ABI, the assumption is no longer true. Adjust the tests to work with both cases. - For tests expecting in memory arguments/results, change to use global variables or memory-assigned argument/results. - Allow more registers. E.g. some tests expecting register names contain only letters (e.g. AX), but it can also contain numbers (e.g. R10). - Some instruction selection changes when operate on register vs. memory, e.g. ADDQ vs. LEAQ, MOVB vs. MOVL. Accept both. TODO: mathbits.go and memops.go still need fix. Change-Id: Ic5932b4b5dd3f5d30ed078d296476b641420c4c5 Reviewed-on: https://go-review.googlesource.com/c/go/+/309335 Trust: Cherry Zhang <cherryyz@google.com> Run-TryBot: Cherry Zhang <cherryyz@google.com> TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: David Chase <drchase@google.com> |
||
Pat Gavlin
|
359f44910f |
cmd/compile: fix long RMW bit operations on AMD64
Under certain circumstances, the existing rules for bit operations can
produce code that writes beyond its intended bounds. For example,
consider the following code:
func repro(b []byte, addr, bit int32) {
_ = b[3]
v := uint32(b[0]) | uint32(b[1])<<8 | uint32(b[2])<<16 | uint32(b[3])<<24 | 1<<(bit&31)
b[0] = byte(v)
b[1] = byte(v >> 8)
b[2] = byte(v >> 16)
b[3] = byte(v >> 24)
}
Roughly speaking:
1. The expression `1 << (bit & 31)` is rewritten into `(SHLL 1 bit)`
2. The expression `uint32(b[0]) | uint32(b[1])<<8 | uint32(b[2])<<16 |
uint32(b[3])<<24` is rewritten into `(MOVLload &b[0])`
3. The statements `b[0] = byte(v) ... b[3] = byte(v >> 24)` are
rewritten into `(MOVLstore &b[0], v)`
4. `(ORL (SHLL 1, bit) (MOVLload &b[0]))` is rewritten into
`(BTSL (MOVLload &b[0]) bit)`. This is a valid transformation because
the destination is a register: in this case, the bit offset is masked
by the number of bits in the destination register. This is identical
to the masking performed by `SHL`.
5. `(MOVLstore &b[0] (BTSL (MOVLload &b[0]) bit))` is rewritten into
`(BTSLmodify &b[0] bit)`. This is an invalid transformation because
the destination is memory: in this case, the bit offset is not
masked, and the chosen instruction may write outside its intended
32-bit location.
These changes fix the invalid rewrite performed in step (5) by
explicitly maksing the bit offset operand to `BT(S|R|C)(L|Q)modify`. In
the example above, the adjusted rules produce
`(BTSLmodify &b[0] (ANDLconst [31] bit))` in step (5).
These changes also add several new rules to rewrite bit sets, toggles,
and clears that are rooted at `(OR|XOR|AND)(L|Q)modify` operators into
appropriate `BT(S|R|C)(L|Q)modify` operators. These rules catch cases
where `MOV(L|Q)store ((OR|XOR|AND)(L|Q) ...)` is rewritten to
`(OR|XOR|AND)(L|Q)modify` before the `(OR|XOR|AND)(L|Q) ...` can be
rewritten to `BT(S|R|C)(L|Q) ...`.
Overall, compilecmp reports small improvements in code size on
darwin/amd64 when the changes to the compiler itself are exlcuded:
file before after Δ %
runtime.s 536464 536412 -52 -0.010%
bytes.s 32629 32593 -36 -0.110%
strings.s 44565 44529 -36 -0.081%
os/signal.s 7967 7959 -8 -0.100%
cmd/vendor/golang.org/x/sys/unix.s 81686 81678 -8 -0.010%
math/big.s 188235 188253 +18 +0.010%
cmd/link/internal/loader.s 89295 89056 -239 -0.268%
cmd/link/internal/ld.s 633551 633232 -319 -0.050%
cmd/link/internal/arm.s 18934 18928 -6 -0.032%
cmd/link/internal/arm64.s 31814 31801 -13 -0.041%
cmd/link/internal/riscv64.s 7347 7345 -2 -0.027%
cmd/compile/internal/ssa.s 4029173 4033066 +3893 +0.097%
total 21298280 21301472 +3192 +0.015%
Change-Id: I2e560548b515865129e1724e150e30540e9d29ce
GitHub-Last-Rev:
|
||
|
Keith Randall
|
42cd40ee74 |
cmd/compile: improve bit test code
Some bit test instruction generation stopped triggering after the change to addressing modes. I suspect this was just because ANDQload was being generated before the rewrite rules could discover the BTQ. Fix that by decomposing the ANDQload when it is surrounded by a TESTQ (thus re-enabling the BTQ rules). Fixes #44228 Change-Id: I489b4a5a7eb01c65fc8db0753f8cec54097cadb2 Reviewed-on: https://go-review.googlesource.com/c/go/+/291749 Trust: Keith Randall <khr@golang.org> Trust: Josh Bleecher Snyder <josharian@gmail.com> Run-TryBot: Keith Randall <khr@golang.org> Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com> |
||
Alberto Donizetti
|
7307e86afd |
test/codegen: go fmt
Fixes #42445 Change-Id: I9653ef094dba2a1ac2e3daaa98279d10df17a2a1 Reviewed-on: https://go-review.googlesource.com/c/go/+/268257 Trust: Alberto Donizetti <alb.donizetti@gmail.com> Trust: Martin Möhrmann <moehrmann@google.com> Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com> TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Martin Möhrmann <moehrmann@google.com> |
||
Michael Munday
|
854e892ce1 |
cmd/compile: optimize shift pairs and masks on s390x
Optimize combinations of left and right shifts by a constant value into a 'rotate then insert selected bits [into zero]' instruction. Use the same instruction for contiguous masks since it has some benefits over 'and immediate' (not restricted to 32-bits, does not overwrite source register). To keep the complexity of this change under control I've only implemented 64 bit operations for now. There are a lot more optimizations that can be done with this instruction family. However, since their function overlaps with other instructions we need to be somewhat careful not to break existing optimization rules by creating optimization dead ends. This is particularly true of the load/store merging rules which contain lots of zero extensions and shifts. This CL does interfere with the store merging rules when an operand is shifted left before it is stored: binary.BigEndian.PutUint64(b, x << 1) This is unfortunate but it's not critical and somewhat complex so I plan to fix that in a follow up CL. file before after Δ % addr2line 4117446 4117282 -164 -0.004% api 4945184 4942752 -2432 -0.049% asm 4998079 4991891 -6188 -0.124% buildid 2685158 2684074 -1084 -0.040% cgo 4553732 4553394 -338 -0.007% compile 19294446 19245070 -49376 -0.256% cover 4897105 4891319 -5786 -0.118% dist 3544389 3542785 -1604 -0.045% doc 3926795 3927617 +822 +0.021% fix 3302958 3293868 -9090 -0.275% link 6546274 6543456 -2818 -0.043% nm 4102021 4100825 -1196 -0.029% objdump 4542431 4548483 +6052 +0.133% pack 2482465 2416389 -66076 -2.662% pprof 13366541 13363915 -2626 -0.020% test2json 2829007 2761515 -67492 -2.386% trace 10216164 10219684 +3520 +0.034% vet 6773956 6773572 -384 -0.006% total 107124151 106917891 -206260 -0.193% Change-Id: I7591cce41e06867ba10a745daae9333513062746 Reviewed-on: https://go-review.googlesource.com/c/go/+/233317 Run-TryBot: Michael Munday <mike.munday@ibm.com> TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Keith Randall <khr@golang.org> Trust: Michael Munday <mike.munday@ibm.com> |
||
diaxu01
|
01aad9ea93 |
cmd/compile: Optimize ARM64's code with EON
This patch fuses pattern '(MVN (XOR x y))' into '(EON x y)'. Change-Id: I269c98ce198d51a4945ce8bd0e1024acbd1b7609 Reviewed-on: https://go-review.googlesource.com/c/go/+/239638 Run-TryBot: Cherry Zhang <cherryyz@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Cherry Zhang <cherryyz@google.com> |
||
Josh Bleecher Snyder
|
50b11318fe |
cmd/compile: use oneBit instead of isPowerOfTwo in bit optimization
This optimization works on any integer with exactly one bit set. This is identical to being a power of two, except in the most negative number. Use oneBit instead. The rule now triggers in a few more places in std+cmd, in packages encoding/asn1, crypto/elliptic, and vendor/golang.org/x/crypto/cryptobyte. This change obviates the need for CL 222479 by doing this optimization consistently in the compiler. Change-Id: I983c6235290fdc634fda5e11b10f1f8ce041272f Reviewed-on: https://go-review.googlesource.com/c/go/+/229124 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org> |
||
LE Manh Cuong
|
c5f142fa9f |
cmd/compile: optimize bitset tests
The assembly output for x & c == c, where c is power of 2: MOVQ "".set+8(SP), AX ANDQ $8, AX CMPQ AX, $8 SETEQ "".~r2+24(SP) With optimization using bitset: MOVQ "".set+8(SP), AX BTL $3, AX SETCS "".~r2+24(SP) output less than 1 instruction. However, there is no speed improvement: name old time/op new time/op delta AllBitSet-8 0.35ns ± 0% 0.35ns ± 0% ~ (all equal) Fixes #31904 Change-Id: I5dca4e410bf45716ed2145e3473979ec997e35d4 Reviewed-on: https://go-review.googlesource.com/c/go/+/175957 Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Keith Randall <khr@golang.org> |
||
Ben Shi
|
c6bf9a8109 |
cmd/compile: optimize AMD64's bit wise operation
Currently "arr[idx] |= 0x80" is compiled to MOVLload->BTSL->MOVLstore. And this CL optimizes it to a single BTSLconstmodify. Other bit wise operations with a direct memory operand are also implemented. 1. The size of the executable bin/go decreases about 4KB, and the total size of pkg/linux_amd64 (excluding cmd/compile) decreases about 0.6KB. 2. There a little improvement in the go1 benchmark test (excluding noise). name old time/op new time/op delta BinaryTree17-4 2.66s ± 4% 2.66s ± 3% ~ (p=0.596 n=49+49) Fannkuch11-4 2.38s ± 2% 2.32s ± 2% -2.69% (p=0.000 n=50+50) FmtFprintfEmpty-4 42.7ns ± 4% 43.2ns ± 7% +1.31% (p=0.009 n=50+50) FmtFprintfString-4 71.0ns ± 5% 72.0ns ± 3% +1.33% (p=0.000 n=50+50) FmtFprintfInt-4 80.7ns ± 4% 80.6ns ± 3% ~ (p=0.931 n=50+50) FmtFprintfIntInt-4 125ns ± 3% 126ns ± 4% ~ (p=0.051 n=50+50) FmtFprintfPrefixedInt-4 158ns ± 1% 142ns ± 3% -9.84% (p=0.000 n=36+50) FmtFprintfFloat-4 215ns ± 4% 212ns ± 4% -1.23% (p=0.002 n=50+50) FmtManyArgs-4 519ns ± 3% 510ns ± 3% -1.77% (p=0.000 n=50+50) GobDecode-4 6.49ms ± 6% 6.52ms ± 5% ~ (p=0.866 n=50+50) GobEncode-4 5.93ms ± 8% 6.01ms ± 7% ~ (p=0.076 n=50+50) Gzip-4 222ms ± 4% 224ms ± 8% +0.80% (p=0.001 n=50+50) Gunzip-4 36.6ms ± 5% 36.4ms ± 4% ~ (p=0.093 n=50+50) HTTPClientServer-4 59.1µs ± 1% 58.9µs ± 2% -0.24% (p=0.039 n=49+48) JSONEncode-4 9.23ms ± 4% 9.21ms ± 5% ~ (p=0.244 n=50+50) JSONDecode-4 48.8ms ± 4% 48.7ms ± 4% ~ (p=0.653 n=50+50) Mandelbrot200-4 3.81ms ± 4% 3.80ms ± 3% ~ (p=0.834 n=50+50) GoParse-4 3.20ms ± 5% 3.19ms ± 5% ~ (p=0.494 n=50+50) RegexpMatchEasy0_32-4 78.1ns ± 2% 77.4ns ± 3% -0.86% (p=0.005 n=50+50) RegexpMatchEasy0_1K-4 233ns ± 3% 233ns ± 3% ~ (p=0.074 n=50+50) RegexpMatchEasy1_32-4 74.2ns ± 3% 73.4ns ± 3% -1.06% (p=0.000 n=50+50) RegexpMatchEasy1_1K-4 369ns ± 2% 364ns ± 4% -1.41% (p=0.000 n=36+50) RegexpMatchMedium_32-4 109ns ± 4% 107ns ± 3% -2.06% (p=0.001 n=50+50) RegexpMatchMedium_1K-4 31.5µs ± 3% 30.8µs ± 3% -2.20% (p=0.000 n=50+50) RegexpMatchHard_32-4 1.57µs ± 3% 1.56µs ± 2% -0.57% (p=0.016 n=50+50) RegexpMatchHard_1K-4 47.4µs ± 4% 47.0µs ± 3% -0.82% (p=0.008 n=50+50) Revcomp-4 414ms ± 7% 412ms ± 7% ~ (p=0.285 n=50+50) Template-4 64.3ms ± 4% 62.7ms ± 3% -2.44% (p=0.000 n=50+50) TimeParse-4 316ns ± 3% 313ns ± 3% ~ (p=0.122 n=50+50) TimeFormat-4 291ns ± 3% 293ns ± 3% +0.80% (p=0.001 n=50+50) [Geo mean] 46.5µs 46.2µs -0.81% name old speed new speed delta GobDecode-4 118MB/s ± 6% 118MB/s ± 5% ~ (p=0.863 n=50+50) GobEncode-4 130MB/s ± 9% 128MB/s ± 8% ~ (p=0.076 n=50+50) Gzip-4 87.4MB/s ± 4% 86.8MB/s ± 7% -0.78% (p=0.002 n=50+50) Gunzip-4 531MB/s ± 5% 533MB/s ± 4% ~ (p=0.093 n=50+50) JSONEncode-4 210MB/s ± 4% 211MB/s ± 5% ~ (p=0.247 n=50+50) JSONDecode-4 39.8MB/s ± 4% 39.9MB/s ± 4% ~ (p=0.654 n=50+50) GoParse-4 18.1MB/s ± 5% 18.2MB/s ± 5% ~ (p=0.493 n=50+50) RegexpMatchEasy0_32-4 410MB/s ± 2% 413MB/s ± 3% +0.86% (p=0.004 n=50+50) RegexpMatchEasy0_1K-4 4.39GB/s ± 3% 4.38GB/s ± 3% ~ (p=0.063 n=50+50) RegexpMatchEasy1_32-4 432MB/s ± 3% 436MB/s ± 3% +1.07% (p=0.000 n=50+50) RegexpMatchEasy1_1K-4 2.77GB/s ± 2% 2.81GB/s ± 4% +1.46% (p=0.000 n=36+50) RegexpMatchMedium_32-4 9.16MB/s ± 3% 9.35MB/s ± 4% +2.09% (p=0.001 n=50+50) RegexpMatchMedium_1K-4 32.5MB/s ± 3% 33.2MB/s ± 3% +2.25% (p=0.000 n=50+50) RegexpMatchHard_32-4 20.4MB/s ± 3% 20.5MB/s ± 2% +0.56% (p=0.017 n=50+50) RegexpMatchHard_1K-4 21.6MB/s ± 4% 21.8MB/s ± 3% +0.83% (p=0.008 n=50+50) Revcomp-4 613MB/s ± 4% 618MB/s ± 7% ~ (p=0.152 n=48+50) Template-4 30.2MB/s ± 4% 30.9MB/s ± 3% +2.49% (p=0.000 n=50+50) [Geo mean] 127MB/s 128MB/s +0.64% Change-Id: If405198283855d75697f66cf894b2bef458f620e Reviewed-on: https://go-review.googlesource.com/135422 Reviewed-by: Keith Randall <khr@golang.org> |
||
|
Ben Shi
|
9f2411894b |
cmd/compile: optimize arm's bit operation
BFC (Bit Field Clear) was introduced in ARMv7, which can simplify ANDconst and BICconst. And this CL implements that optimization. 1. The total size of pkg/android_arm decreases about 3KB, excluding cmd/compile/. 2. There is no regression in the go1 benchmark result, and some cases (FmtFprintfEmpty-4 and RegexpMatchMedium_32-4) even get slight improvement. name old time/op new time/op delta BinaryTree17-4 25.3s ± 1% 25.2s ± 1% ~ (p=0.072 n=30+29) Fannkuch11-4 13.3s ± 0% 13.3s ± 0% +0.13% (p=0.000 n=30+26) FmtFprintfEmpty-4 407ns ± 0% 394ns ± 0% -3.19% (p=0.000 n=26+28) FmtFprintfString-4 664ns ± 0% 662ns ± 0% -0.22% (p=0.000 n=30+30) FmtFprintfInt-4 712ns ± 0% 706ns ± 0% -0.79% (p=0.000 n=30+30) FmtFprintfIntInt-4 1.06µs ± 0% 1.05µs ± 0% -0.38% (p=0.000 n=30+30) FmtFprintfPrefixedInt-4 1.16µs ± 0% 1.16µs ± 0% -0.13% (p=0.000 n=30+29) FmtFprintfFloat-4 2.24µs ± 0% 2.23µs ± 0% -0.51% (p=0.000 n=29+21) FmtManyArgs-4 4.09µs ± 0% 4.06µs ± 0% -0.83% (p=0.000 n=28+30) GobDecode-4 55.0ms ± 5% 55.4ms ± 5% ~ (p=0.307 n=30+30) GobEncode-4 51.2ms ± 1% 51.9ms ± 1% +1.23% (p=0.000 n=29+30) Gzip-4 2.64s ± 0% 2.60s ± 0% -1.35% (p=0.000 n=30+29) Gunzip-4 309ms ± 0% 308ms ± 0% -0.27% (p=0.000 n=30+30) HTTPClientServer-4 1.03ms ± 5% 1.02ms ± 4% ~ (p=0.117 n=30+29) JSONEncode-4 101ms ± 2% 101ms ± 2% ~ (p=0.338 n=29+29) JSONDecode-4 383ms ± 2% 382ms ± 2% ~ (p=0.751 n=26+30) Mandelbrot200-4 18.4ms ± 0% 18.4ms ± 0% -0.10% (p=0.000 n=29+29) GoParse-4 22.6ms ± 0% 22.5ms ± 0% -0.39% (p=0.000 n=30+30) RegexpMatchEasy0_32-4 761ns ± 0% 750ns ± 0% -1.47% (p=0.000 n=26+29) RegexpMatchEasy0_1K-4 4.33µs ± 0% 4.34µs ± 0% +0.27% (p=0.000 n=25+28) RegexpMatchEasy1_32-4 809ns ± 0% 795ns ± 0% -1.74% (p=0.000 n=27+25) RegexpMatchEasy1_1K-4 5.54µs ± 0% 5.53µs ± 0% -0.18% (p=0.000 n=29+29) RegexpMatchMedium_32-4 1.11µs ± 0% 1.08µs ± 0% -2.78% (p=0.000 n=27+29) RegexpMatchMedium_1K-4 255µs ± 0% 255µs ± 0% -0.02% (p=0.029 n=30+30) RegexpMatchHard_32-4 14.7µs ± 0% 14.7µs ± 0% -0.28% (p=0.000 n=30+29) RegexpMatchHard_1K-4 439µs ± 0% 439µs ± 0% ~ (p=0.907 n=23+27) Revcomp-4 41.9ms ± 1% 41.9ms ± 1% ~ (p=0.230 n=28+30) Template-4 522ms ± 1% 528ms ± 1% +1.25% (p=0.000 n=30+30) TimeParse-4 3.34µs ± 0% 3.35µs ± 0% +0.23% (p=0.000 n=30+27) TimeFormat-4 6.06µs ± 0% 6.13µs ± 0% +1.08% (p=0.000 n=29+29) [Geo mean] 384µs 382µs -0.37% name old speed new speed delta GobDecode-4 14.0MB/s ± 5% 13.9MB/s ± 5% ~ (p=0.308 n=30+30) GobEncode-4 15.0MB/s ± 1% 14.8MB/s ± 1% -1.22% (p=0.000 n=29+30) Gzip-4 7.36MB/s ± 0% 7.46MB/s ± 0% +1.35% (p=0.000 n=30+30) Gunzip-4 62.8MB/s ± 0% 63.0MB/s ± 0% +0.27% (p=0.000 n=30+30) JSONEncode-4 19.2MB/s ± 2% 19.2MB/s ± 2% ~ (p=0.312 n=29+29) JSONDecode-4 5.05MB/s ± 3% 5.08MB/s ± 2% ~ (p=0.356 n=29+30) GoParse-4 2.56MB/s ± 0% 2.57MB/s ± 0% +0.39% (p=0.000 n=23+27) RegexpMatchEasy0_32-4 42.0MB/s ± 0% 42.6MB/s ± 0% +1.50% (p=0.000 n=26+28) RegexpMatchEasy0_1K-4 236MB/s ± 0% 236MB/s ± 0% -0.27% (p=0.000 n=25+28) RegexpMatchEasy1_32-4 39.6MB/s ± 0% 40.2MB/s ± 0% +1.73% (p=0.000 n=27+27) RegexpMatchEasy1_1K-4 185MB/s ± 0% 185MB/s ± 0% +0.18% (p=0.000 n=29+29) RegexpMatchMedium_32-4 900kB/s ± 0% 920kB/s ± 0% +2.22% (p=0.000 n=29+29) RegexpMatchMedium_1K-4 4.02MB/s ± 0% 4.02MB/s ± 0% +0.07% (p=0.004 n=30+27) RegexpMatchHard_32-4 2.17MB/s ± 0% 2.18MB/s ± 0% +0.46% (p=0.000 n=30+26) RegexpMatchHard_1K-4 2.33MB/s ± 0% 2.33MB/s ± 0% ~ (all equal) Revcomp-4 60.6MB/s ± 1% 60.7MB/s ± 1% ~ (p=0.207 n=28+30) Template-4 3.72MB/s ± 1% 3.67MB/s ± 1% -1.23% (p=0.000 n=30+30) [Geo mean] 12.9MB/s 12.9MB/s +0.29% Change-Id: I07f497f8bb476c950dc555491d00c9066fb64a4e Reviewed-on: https://go-review.googlesource.com/134232 Run-TryBot: Ben Shi <powerman1st@163.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Cherry Zhang <cherryyz@google.com> |
||
|
Ben Shi
|
0a382e0b7f |
cmd/compile: optimize ARMv7 code
"AND $0xffff0000, Rx" will be encoded to 12 bytes. 1. MOVWload from the constant pool to Rtmp 2. AND Rtmp, Rx 3. a 4-byte item in the constant pool It can be simplified to 8 bytes on ARMv7, since ARMv7 has "MOVW $imm-16, Rx". 1. MOVW $0xffff, Rtmp 2. BIC Rtmp, Rx The above optimization also applies to BICconst, ADDconst and SUBconst. 1. The total size of pkg/android_arm (excluding cmd/compile) decreases about 2KB. 2. The go1 benchmark shows no regression, exlcuding noise. name old time/op new time/op delta BinaryTree17-4 25.5s ± 1% 25.2s ± 1% -0.85% (p=0.000 n=30+30) Fannkuch11-4 13.3s ± 0% 13.3s ± 0% +0.16% (p=0.000 n=24+25) FmtFprintfEmpty-4 397ns ± 0% 394ns ± 0% -0.64% (p=0.000 n=30+30) FmtFprintfString-4 679ns ± 0% 678ns ± 0% ~ (p=0.093 n=30+29) FmtFprintfInt-4 708ns ± 0% 707ns ± 0% -0.19% (p=0.000 n=27+28) FmtFprintfIntInt-4 1.05µs ± 0% 1.05µs ± 0% -0.07% (p=0.001 n=18+30) FmtFprintfPrefixedInt-4 1.16µs ± 0% 1.15µs ± 0% -0.41% (p=0.000 n=29+30) FmtFprintfFloat-4 2.26µs ± 0% 2.23µs ± 1% -1.40% (p=0.000 n=30+30) FmtManyArgs-4 3.96µs ± 0% 3.95µs ± 0% -0.29% (p=0.000 n=29+30) GobDecode-4 52.9ms ± 2% 53.4ms ± 2% +0.92% (p=0.004 n=28+30) GobEncode-4 49.7ms ± 2% 49.8ms ± 2% ~ (p=0.890 n=30+26) Gzip-4 2.61s ± 0% 2.60s ± 0% -0.36% (p=0.000 n=29+29) Gunzip-4 312ms ± 0% 311ms ± 0% -0.13% (p=0.000 n=30+28) HTTPClientServer-4 1.02ms ± 8% 1.00ms ± 7% ~ (p=0.224 n=29+26) JSONEncode-4 125ms ± 1% 124ms ± 3% -1.05% (p=0.000 n=25+30) JSONDecode-4 432ms ± 1% 436ms ± 2% ~ (p=0.277 n=26+30) Mandelbrot200-4 18.4ms ± 0% 18.4ms ± 0% +0.02% (p=0.001 n=28+25) GoParse-4 22.4ms ± 1% 22.3ms ± 1% -0.41% (p=0.000 n=28+28) RegexpMatchEasy0_32-4 697ns ± 0% 706ns ± 0% +1.23% (p=0.000 n=19+30) RegexpMatchEasy0_1K-4 4.27µs ± 0% 4.26µs ± 0% -0.06% (p=0.000 n=30+30) RegexpMatchEasy1_32-4 741ns ± 0% 735ns ± 0% -0.86% (p=0.000 n=26+30) RegexpMatchEasy1_1K-4 5.49µs ± 0% 5.49µs ± 0% -0.03% (p=0.023 n=25+30) RegexpMatchMedium_32-4 1.05µs ± 2% 1.04µs ± 2% ~ (p=0.893 n=30+30) RegexpMatchMedium_1K-4 261µs ± 0% 261µs ± 0% -0.11% (p=0.000 n=29+30) RegexpMatchHard_32-4 14.9µs ± 0% 14.9µs ± 0% -0.36% (p=0.000 n=23+29) RegexpMatchHard_1K-4 446µs ± 0% 445µs ± 0% -0.17% (p=0.000 n=30+29) Revcomp-4 41.6ms ± 1% 41.7ms ± 1% +0.27% (p=0.040 n=28+30) Template-4 531ms ± 0% 532ms ± 1% ~ (p=0.059 n=30+30) TimeParse-4 3.40µs ± 0% 3.33µs ± 0% -2.02% (p=0.000 n=30+30) TimeFormat-4 6.14µs ± 0% 6.11µs ± 0% -0.45% (p=0.000 n=27+29) [Geo mean] 384µs 383µs -0.27% name old speed new speed delta GobDecode-4 14.5MB/s ± 2% 14.4MB/s ± 2% -0.90% (p=0.005 n=28+30) GobEncode-4 15.4MB/s ± 2% 15.4MB/s ± 2% ~ (p=0.741 n=30+25) Gzip-4 7.44MB/s ± 0% 7.47MB/s ± 1% +0.37% (p=0.000 n=25+30) Gunzip-4 62.3MB/s ± 0% 62.4MB/s ± 0% +0.13% (p=0.000 n=30+28) JSONEncode-4 15.5MB/s ± 1% 15.6MB/s ± 3% +1.07% (p=0.000 n=25+30) JSONDecode-4 4.48MB/s ± 0% 4.46MB/s ± 2% ~ (p=0.655 n=23+30) GoParse-4 2.58MB/s ± 1% 2.59MB/s ± 1% +0.42% (p=0.000 n=28+29) RegexpMatchEasy0_32-4 45.9MB/s ± 0% 45.3MB/s ± 0% -1.23% (p=0.000 n=28+30) RegexpMatchEasy0_1K-4 240MB/s ± 0% 240MB/s ± 0% +0.07% (p=0.000 n=30+30) RegexpMatchEasy1_32-4 43.2MB/s ± 0% 43.5MB/s ± 0% +0.85% (p=0.000 n=30+28) RegexpMatchEasy1_1K-4 186MB/s ± 0% 186MB/s ± 0% +0.03% (p=0.026 n=25+30) RegexpMatchMedium_32-4 955kB/s ± 2% 960kB/s ± 2% ~ (p=0.084 n=30+30) RegexpMatchMedium_1K-4 3.92MB/s ± 0% 3.93MB/s ± 0% +0.14% (p=0.000 n=29+30) RegexpMatchHard_32-4 2.14MB/s ± 0% 2.15MB/s ± 0% +0.31% (p=0.000 n=30+26) RegexpMatchHard_1K-4 2.30MB/s ± 0% 2.30MB/s ± 0% ~ (all equal) Revcomp-4 61.1MB/s ± 1% 60.9MB/s ± 1% -0.27% (p=0.039 n=28+30) Template-4 3.66MB/s ± 0% 3.65MB/s ± 1% -0.14% (p=0.045 n=30+30) [Geo mean] 12.8MB/s 12.8MB/s +0.04% Change-Id: I02370e2584b4c041fddd324c97628fd6f0c12183 Reviewed-on: https://go-review.googlesource.com/123179 Run-TryBot: Ben Shi <powerman1st@163.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Cherry Zhang <cherryyz@google.com> |
||
|
Ben Shi
|
b75c5c5992 |
cmd/compile: optimize AMD64 with more read-modify-write operations
6 more operations which do read-modify-write with a constant source operand are added. 1. The total size of pkg/linux_amd64 decreases about 3KB, excluding cmd/compile. 2. The go1 benckmark shows a slight improvement. name old time/op new time/op delta BinaryTree17-4 2.61s ± 4% 2.67s ± 2% +2.26% (p=0.000 n=30+29) Fannkuch11-4 2.39s ± 2% 2.32s ± 2% -2.67% (p=0.000 n=30+30) FmtFprintfEmpty-4 44.0ns ± 4% 41.7ns ± 4% -5.15% (p=0.000 n=30+30) FmtFprintfString-4 74.2ns ± 4% 72.3ns ± 4% -2.59% (p=0.000 n=30+30) FmtFprintfInt-4 81.7ns ± 3% 78.8ns ± 4% -3.54% (p=0.000 n=27+30) FmtFprintfIntInt-4 130ns ± 4% 124ns ± 5% -4.60% (p=0.000 n=30+30) FmtFprintfPrefixedInt-4 154ns ± 3% 152ns ± 3% -1.13% (p=0.012 n=30+30) FmtFprintfFloat-4 215ns ± 4% 212ns ± 5% -1.56% (p=0.002 n=30+30) FmtManyArgs-4 522ns ± 3% 512ns ± 3% -1.84% (p=0.001 n=30+30) GobDecode-4 6.42ms ± 5% 6.49ms ± 7% ~ (p=0.070 n=30+30) GobEncode-4 6.07ms ± 8% 5.98ms ± 8% ~ (p=0.150 n=30+30) Gzip-4 236ms ± 4% 223ms ± 4% -5.57% (p=0.000 n=30+30) Gunzip-4 37.4ms ± 3% 36.7ms ± 4% -2.03% (p=0.000 n=30+30) HTTPClientServer-4 58.7µs ± 1% 58.5µs ± 2% -0.37% (p=0.018 n=30+29) JSONEncode-4 12.0ms ± 4% 12.1ms ± 3% ~ (p=0.112 n=30+30) JSONDecode-4 54.5ms ± 3% 55.5ms ± 4% +1.80% (p=0.006 n=30+30) Mandelbrot200-4 3.78ms ± 4% 3.78ms ± 4% ~ (p=0.173 n=30+30) GoParse-4 3.16ms ± 5% 3.22ms ± 5% +1.75% (p=0.010 n=30+30) RegexpMatchEasy0_32-4 76.6ns ± 1% 75.9ns ± 3% ~ (p=0.672 n=25+30) RegexpMatchEasy0_1K-4 252ns ± 3% 253ns ± 3% +0.57% (p=0.027 n=30+30) RegexpMatchEasy1_32-4 69.8ns ± 4% 70.2ns ± 6% ~ (p=0.539 n=30+30) RegexpMatchEasy1_1K-4 374ns ± 3% 373ns ± 5% ~ (p=0.263 n=30+30) RegexpMatchMedium_32-4 107ns ± 4% 109ns ± 3% ~ (p=0.067 n=30+30) RegexpMatchMedium_1K-4 33.9µs ± 5% 34.1µs ± 4% ~ (p=0.297 n=30+30) RegexpMatchHard_32-4 1.54µs ± 3% 1.56µs ± 4% +1.43% (p=0.002 n=30+30) RegexpMatchHard_1K-4 46.6µs ± 3% 47.0µs ± 3% ~ (p=0.055 n=30+30) Revcomp-4 411ms ± 6% 407ms ± 6% ~ (p=0.219 n=30+30) Template-4 66.8ms ± 3% 64.8ms ± 5% -3.01% (p=0.000 n=30+30) TimeParse-4 312ns ± 2% 319ns ± 3% +2.50% (p=0.000 n=30+30) TimeFormat-4 296ns ± 5% 299ns ± 3% +0.93% (p=0.005 n=30+30) [Geo mean] 47.5µs 47.1µs -0.75% name old speed new speed delta GobDecode-4 120MB/s ± 5% 118MB/s ± 6% ~ (p=0.072 n=30+30) GobEncode-4 127MB/s ± 8% 129MB/s ± 8% ~ (p=0.150 n=30+30) Gzip-4 82.1MB/s ± 4% 87.0MB/s ± 4% +5.90% (p=0.000 n=30+30) Gunzip-4 519MB/s ± 4% 529MB/s ± 4% +2.07% (p=0.001 n=30+30) JSONEncode-4 162MB/s ± 4% 161MB/s ± 3% ~ (p=0.110 n=30+30) JSONDecode-4 35.6MB/s ± 3% 35.0MB/s ± 4% -1.77% (p=0.007 n=30+30) GoParse-4 18.3MB/s ± 4% 18.0MB/s ± 4% -1.72% (p=0.009 n=30+30) RegexpMatchEasy0_32-4 418MB/s ± 1% 422MB/s ± 3% ~ (p=0.645 n=25+30) RegexpMatchEasy0_1K-4 4.06GB/s ± 3% 4.04GB/s ± 3% -0.57% (p=0.033 n=30+30) RegexpMatchEasy1_32-4 459MB/s ± 4% 456MB/s ± 6% ~ (p=0.530 n=30+30) RegexpMatchEasy1_1K-4 2.73GB/s ± 3% 2.75GB/s ± 5% ~ (p=0.279 n=30+30) RegexpMatchMedium_32-4 9.28MB/s ± 5% 9.18MB/s ± 4% ~ (p=0.086 n=30+30) RegexpMatchMedium_1K-4 30.2MB/s ± 4% 30.0MB/s ± 4% ~ (p=0.300 n=30+30) RegexpMatchHard_32-4 20.8MB/s ± 3% 20.5MB/s ± 4% -1.41% (p=0.002 n=30+30) RegexpMatchHard_1K-4 22.0MB/s ± 3% 21.8MB/s ± 3% ~ (p=0.051 n=30+30) Revcomp-4 619MB/s ± 7% 625MB/s ± 7% ~ (p=0.219 n=30+30) Template-4 29.0MB/s ± 3% 29.9MB/s ± 4% +3.11% (p=0.000 n=30+30) [Geo mean] 123MB/s 123MB/s +0.28% Change-Id: I850652cfd53329c1af804b7f57f4393d8097bb0d Reviewed-on: https://go-review.googlesource.com/121135 Run-TryBot: Ben Shi <powerman1st@163.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Ilya Tocar <ilya.tocar@intel.com> |
||
|
Alberto Donizetti
|
188e2bf897 |
test/codegen: port arm64 BIC/EON/ORN and masking tests
And delete them from asm_test. Change-Id: I24f421b87e8cb4770c887a6dfd58eacd0088947d Reviewed-on: https://go-review.googlesource.com/106056 Reviewed-by: Keith Randall <khr@golang.org> |
||
Giovanni Bajo
|
79112707bb |
cmd/compile: add patterns for bit set/clear/complement on amd64
This patch completes implementation of BT(Q|L), and adds support
for BT(S|R|C)(Q|L).
Example of code changes from time.(*Time).addSec:
if t.wall&hasMonotonic != 0 {
0x1073465 488b08 MOVQ 0(AX), CX
0x1073468 4889ca MOVQ CX, DX
0x107346b 48c1e93f SHRQ $0x3f, CX
0x107346f 48c1e13f SHLQ $0x3f, CX
0x1073473 48f7c1ffffffff TESTQ $-0x1, CX
0x107347a 746b JE 0x10734e7
if t.wall&hasMonotonic != 0 {
0x1073435 488b08 MOVQ 0(AX), CX
0x1073438 480fbae13f BTQ $0x3f, CX
0x107343d 7363 JAE 0x10734a2
Another example:
t.wall = t.wall&nsecMask | uint64(dsec)<<nsecShift | hasMonotonic
0x10734c8 4881e1ffffff3f ANDQ $0x3fffffff, CX
0x10734cf 48c1e61e SHLQ $0x1e, SI
0x10734d3 4809ce ORQ CX, SI
0x10734d6 48b90000000000000080 MOVQ $0x8000000000000000, CX
0x10734e0 4809f1 ORQ SI, CX
0x10734e3 488908 MOVQ CX, 0(AX)
t.wall = t.wall&nsecMask | uint64(dsec)<<nsecShift | hasMonotonic
0x107348b 4881e2ffffff3f ANDQ $0x3fffffff, DX
0x1073492 48c1e61e SHLQ $0x1e, SI
0x1073496 4809f2 ORQ SI, DX
0x1073499 480fbaea3f BTSQ $0x3f, DX
0x107349e 488910 MOVQ DX, 0(AX)
Go1 benchmarks seem unaffected, and I would be surprised
otherwise:
name old time/op new time/op delta
BinaryTree17-4 2.64s ± 4% 2.56s ± 9% -2.92% (p=0.008 n=9+9)
Fannkuch11-4 2.90s ± 1% 2.95s ± 3% +1.76% (p=0.010 n=10+9)
FmtFprintfEmpty-4 35.3ns ± 1% 34.5ns ± 2% -2.34% (p=0.004 n=9+8)
FmtFprintfString-4 57.0ns ± 1% 58.4ns ± 5% +2.52% (p=0.029 n=9+10)
FmtFprintfInt-4 59.8ns ± 3% 59.8ns ± 6% ~ (p=0.565 n=10+10)
FmtFprintfIntInt-4 93.9ns ± 3% 91.2ns ± 5% -2.94% (p=0.014 n=10+9)
FmtFprintfPrefixedInt-4 107ns ± 6% 104ns ± 6% ~ (p=0.099 n=10+10)
FmtFprintfFloat-4 187ns ± 3% 188ns ± 3% ~ (p=0.505 n=10+9)
FmtManyArgs-4 410ns ± 1% 415ns ± 6% ~ (p=0.649 n=8+10)
GobDecode-4 5.30ms ± 3% 5.27ms ± 3% ~ (p=0.436 n=10+10)
GobEncode-4 4.62ms ± 5% 4.47ms ± 2% -3.24% (p=0.001 n=9+10)
Gzip-4 197ms ± 4% 193ms ± 3% ~ (p=0.123 n=10+10)
Gunzip-4 30.4ms ± 3% 30.1ms ± 3% ~ (p=0.481 n=10+10)
HTTPClientServer-4 76.3µs ± 1% 76.0µs ± 1% ~ (p=0.236 n=8+9)
JSONEncode-4 10.5ms ± 9% 10.3ms ± 3% ~ (p=0.280 n=10+10)
JSONDecode-4 42.3ms ±10% 41.3ms ± 2% ~ (p=0.053 n=9+10)
Mandelbrot200-4 3.80ms ± 2% 3.72ms ± 2% -2.15% (p=0.001 n=9+10)
GoParse-4 2.88ms ±10% 2.81ms ± 2% ~ (p=0.247 n=10+10)
RegexpMatchEasy0_32-4 69.5ns ± 4% 68.6ns ± 2% ~ (p=0.171 n=10+10)
RegexpMatchEasy0_1K-4 165ns ± 3% 162ns ± 3% ~ (p=0.137 n=10+10)
RegexpMatchEasy1_32-4 65.7ns ± 6% 64.4ns ± 2% -2.02% (p=0.037 n=10+10)
RegexpMatchEasy1_1K-4 278ns ± 2% 279ns ± 3% ~ (p=0.991 n=8+9)
RegexpMatchMedium_32-4 99.3ns ± 3% 98.5ns ± 4% ~ (p=0.457 n=10+9)
RegexpMatchMedium_1K-4 30.1µs ± 1% 30.4µs ± 2% ~ (p=0.173 n=8+10)
RegexpMatchHard_32-4 1.40µs ± 2% 1.41µs ± 4% ~ (p=0.565 n=10+10)
RegexpMatchHard_1K-4 42.5µs ± 1% 41.5µs ± 3% -2.13% (p=0.002 n=8+9)
Revcomp-4 332ms ± 4% 328ms ± 5% ~ (p=0.720 n=9+10)
Template-4 48.3ms ± 2% 49.6ms ± 3% +2.56% (p=0.002 n=8+10)
TimeParse-4 252ns ± 2% 249ns ± 3% ~ (p=0.116 n=9+10)
TimeFormat-4 262ns ± 4% 252ns ± 3% -4.01% (p=0.000 n=9+10)
name old speed new speed delta
GobDecode-4 145MB/s ± 3% 146MB/s ± 3% ~ (p=0.436 n=10+10)
GobEncode-4 166MB/s ± 5% 172MB/s ± 2% +3.28% (p=0.001 n=9+10)
Gzip-4 98.6MB/s ± 4% 100.4MB/s ± 3% ~ (p=0.123 n=10+10)
Gunzip-4 639MB/s ± 3% 645MB/s ± 3% ~ (p=0.481 n=10+10)
JSONEncode-4 185MB/s ± 8% 189MB/s ± 3% ~ (p=0.280 n=10+10)
JSONDecode-4 46.0MB/s ± 9% 47.0MB/s ± 2% +2.21% (p=0.046 n=9+10)
GoParse-4 20.1MB/s ± 9% 20.6MB/s ± 2% ~ (p=0.239 n=10+10)
RegexpMatchEasy0_32-4 460MB/s ± 4% 467MB/s ± 2% ~ (p=0.165 n=10+10)
RegexpMatchEasy0_1K-4 6.19GB/s ± 3% 6.28GB/s ± 3% ~ (p=0.165 n=10+10)
RegexpMatchEasy1_32-4 487MB/s ± 5% 497MB/s ± 2% +2.00% (p=0.043 n=10+10)
RegexpMatchEasy1_1K-4 3.67GB/s ± 2% 3.67GB/s ± 3% ~ (p=0.963 n=8+9)
RegexpMatchMedium_32-4 10.1MB/s ± 3% 10.1MB/s ± 4% ~ (p=0.435 n=10+9)
RegexpMatchMedium_1K-4 34.0MB/s ± 1% 33.7MB/s ± 2% ~ (p=0.173 n=8+10)
RegexpMatchHard_32-4 22.9MB/s ± 2% 22.7MB/s ± 4% ~ (p=0.565 n=10+10)
RegexpMatchHard_1K-4 24.0MB/s ± 3% 24.7MB/s ± 3% +2.64% (p=0.001 n=9+9)
Revcomp-4 766MB/s ± 4% 775MB/s ± 5% ~ (p=0.720 n=9+10)
Template-4 40.2MB/s ± 2% 39.2MB/s ± 3% -2.47% (p=0.002 n=8+10)
The rules match ~1800 times during all.bash.
Fixes #18943
Change-Id: I64be1ada34e89c486dfd935bf429b35652117ed4
Reviewed-on: https://go-review.googlesource.com/94766
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
|
||
|
Alberto Donizetti
|
644b2dafc2 |
test/codegen: add copyright headers to new codegen files
Change-Id: I9fe6572d1043ef9ee09c0925059ded554ad24c6b Reviewed-on: https://go-review.googlesource.com/98215 Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org> |
||
|
Giovanni Bajo
|
c9438cb198 |
test: add support for code generation tests (asmcheck)
The top-level test harness is modified to support a new kind of test: "asmcheck". This is meant to replace asm_test.go as an easier and more readable way to test code generation. I've added a couple of codegen tests to get initial feedback on the syntax. I've created them under a common "codegen" subdirectory, so that it's easier to run them all with "go run run.go -v codegen". The asmcheck syntax allows to insert line comments that can specify a regular expression to match in the assembly code, for multiple architectures (the testsuite will automatically build each testfile multiple times, one per mentioned architecture). Negative matches are unsupported for now, so this cannot fully replace asm_test yet. Change-Id: Ifdbba389f01d55e63e73c99e5f5449e642101d55 Reviewed-on: https://go-review.googlesource.com/97355 Run-TryBot: Giovanni Bajo <rasky@develer.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Keith Randall <khr@golang.org> Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com> |