Pushed from an old client by mistake. These are the
missing changes.
Change-Id: Ia8d61c5c0bde907369366ea9ea98711823342803
Reviewed-on: https://go-review.googlesource.com/21349
Reviewed-by: Todd Neal <todd@tneal.org>
One intrinsic was needed to help get the very best
performance out of a future GC; as long as that one was
being added, I also added Bswap since that is sometimes
a handy thing to have. I had intended to fill out the
bit-scan intrinsic family, but the mismatch between the
"scan forward" instruction and "count leading zeroes"
was large enough to cause me to leave it out -- it poses
a dilemma that I'd rather dodge right now.
These intrinsics are not exposed for general use.
That's a separate issue requiring an API proposal change
( https://github.com/golang/proposal )
All intrinsics are tested, both that they are substituted
on the appropriate architecture, and that they produce the
expected result.
Change-Id: I5848037cfd97de4f75bdc33bdd89bba00af4a8ee
Reviewed-on: https://go-review.googlesource.com/20564
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This should probably be considered "experimental" at this stage, but
what it needs is feedback from adventurous adopters. I think the data
structure used for describing escape reasons might be extendable to
allow a cleanup of the underlying algorithms, which suffers from
insufficiently separated concerns (the graph does not deal well with
escape level adjustments, so it is augmented by a second custom-walk
portion of the "flood" phase. It would be better to put it all,
including level adjustments, in a single graph structure, and then
simply flood the graph.
Tweaked to avoid allocations in the no-logging case.
Modified run.go to ignore lines with leading "#" in the output (since
it can never match a line), and in -update_errors to ignore leading
tabs in output lines and to normalize embedded filenames.
Currently requires -m -m because otherwise the noise/update
burden for the other escape tests is considerable.
There is a partial test. Existing escape analysis tests seem to
cover all except the panic case and what looks like it might be
unreachable code in escape analysis.
Fixes#10526.
Change-Id: I2524fdec54facae48b00b2548e25d9e46fcaf832
Reviewed-on: https://go-review.googlesource.com/18041
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The build tags are necessary to keep "go build" in that directory
building only stdio.go, but we have to arrange for test/run.go to
treat them as satisfied.
Fixes#12625.
Change-Id: Iec0cb2fdc2c9b24a4e0530be25e940aa0cc9552e
Reviewed-on: https://go-review.googlesource.com/17454
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is a bit ugly but it's a useful test. Run go install -buildmode=shared std
and then go run run.go -linkshared (it passes on linux/amd64).
Change-Id: I5684c79cd03817fa1fc399788b7320f8535c08da
Reviewed-on: https://go-review.googlesource.com/16343
Reviewed-by: Russ Cox <rsc@golang.org>
Some tests disabled, some bifurcated into _ssa and not,
with appropriate logging added to compiler.
"tests/live.go" in particular needs attention.
SSA-specific testing removed, since it's all SSA now.
Added "-run_skips" option to tests/run.go to simplify
checking whether a test still fails (or how it fails)
on a skipped platform.
The compiler now compiles with SSA by default.
If you don't want SSA, specify GOSSAHASH=n (or N) as
an environment variable. Function names ending in "_ssa"
are always SSA-compiled.
GOSSAFUNC=fname retains its "SSA for fname, log to ssa.html"
GOSSAPKG=pkg only has an effect when GOSSAHASH=n
GOSSAHASH=10101 etc retains its name-hash-matching behavior
for purposes of debugging.
See #13068
Change-Id: I8217bfeb34173533eaeb391b5f6935483c7d6b43
Reviewed-on: https://go-review.googlesource.com/16299
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Add line that was inadvertently removed.
Change-Id: I99ebc1041e984e408ae5825836c28b9891d6043b
Reviewed-on: https://go-review.googlesource.com/14470
Run-TryBot: Todd Neal <todd@tneal.org>
Reviewed-by: Keith Randall <khr@golang.org>
This matches existing behavior, see issue #2196
Change-Id: Ifa9359b7c821115389f337a57de355c5ec23be8f
Reviewed-on: https://go-review.googlesource.com/14261
Reviewed-by: Keith Randall <khr@golang.org>
Evaluating args can overwrite arg area, so we can't write argsize and func
until args are evaluated.
Fixes test/recover.go, test/recover1.go, and test/fixedbugs/issue4066.go
Change-Id: I862e4934ccdb8661431bcc3e1e93817ea834ea3f
Reviewed-on: https://go-review.googlesource.com/14405
Reviewed-by: David Chase <drchase@google.com>
Now that the standard library tests
are all passing, add the
test directory tests.
These contain a number of edge case tests
that are of particular interest for compilers.
Some kinds of tests are not well-suited
for a new backend, such as errorcheck tests.
To start, use SSA only for run and runoutput.
There are three failing tests now.
Just mark them as such for now,
so that we can prevent regressions.
This code will all be unwound once SSA
codegen matures and becomes the default.
Change-Id: Ic51e6d0cc1cd48ef1e2fe2c9a743bf0cce275200
Reviewed-on: https://go-review.googlesource.com/14344
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also modified test/run.go to ignore messages prefixed <autogenerated>
because those cannot be described with "// ERROR ...", and backed out
patch from issue #9537 because it is no longer necessary. The reasons
described in the 9537 discussion for why escape analysis cannot run
late no longer hold, happily.
Fixes#11053.
Change-Id: Icb14eccdf2e8cde3d0f8fb8a216b765400a96385
Reviewed-on: https://go-review.googlesource.com/11088
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Also modifies 'dist test' to use that sharding, and removes some old
temporary stuff from dist test which are no longer required.
'dist test' now also supports running a list of tests given in
arguments, mutually exclusive with the existing -run=REGEXP flag. The
hacky fast paths for avoiding the 1 second "go list" latency are now
removed and only apply to the case where partial tests are run via
args, instead of regex. The build coordinator will use both styles
for awhile. (the statically-sharded ARM builders on scaleway will
continue to use regexps, but the dynamically-shared builders on GCE
will use the list of tests)
Updates #10029
Change-Id: I557800a54dfa6f3b5100ef4c26fe397ba5189813
Reviewed-on: https://go-review.googlesource.com/10688
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL removes the remaining visible uses of the "architecture letter" concept.
(They are no longer in tool names nor in source directory names.)
Because the architecture letter concept is now gone, delete GOCHAR
from "go env" output, and change go/build.ArchChar to return an
error always.
The architecture letter is still used in the compiler and linker sources
as a clumsy architecture enumeration, but that use is not visible to
Go users and can be cleaned up separately.
Change-Id: I4d97a38f372003fb610c9c5241bea440d9dbeb8d
Reviewed-on: https://go-review.googlesource.com/10289
Reviewed-by: Rob Pike <r@golang.org>
This CL fixes the build to use the newly created go tool compile
and go tool link in place of go tool 5g, go tool 5l, and so on.
See golang-dev thread titled "go tool compile, etc" for background.
Although it was not a primary motivation, this conversion does
reduce the wall clock time and cpu time required for make.bash
by about 10%.
Change-Id: I79cbbdb676cab029db8aeefb99a53178ff55f98d
Reviewed-on: https://go-review.googlesource.com/10288
Reviewed-by: Rob Pike <r@golang.org>
Clean up after CL 5310.
Change-Id: Ib870e7b9d26eb118eefdaa3e76dcec4a4d459584
Reviewed-on: https://go-review.googlesource.com/9398
Reviewed-by: Ian Lance Taylor <iant@golang.org>
These were fixed a little while ago, but overlooked when reenabling
disabled tests.
Update #9968.
Change-Id: I301ef587e580c517a170ad08ff897118b58cedec
Reviewed-on: https://go-review.googlesource.com/9347
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The flag updates error annotations in test files from actual compiler output.
This is useful when doing compiler changes that add/remove/change lots of errors,
or when adding lots of new tests.
Also I noticed at least 2 cases where annotation were sub-optimal:
1. The annotation was "leaking param p" when the actual error is
"leaking param p to result ~r1".
2. The annotation was "leaking param m" when the actual errors
are "leaking param m" and "leaking param mv1".
For now it works only for errorcheck mode.
Also, apply the update to escape and liveness tests.
Some files have gccgo-specific errors of the form "gc error|gccgo error",
so it is risky to run update on all files. Gccgo-specific error
does not necessary contain '|', it can be just truncated.
Change-Id: Iaaae767f859dcb8321a8cb4970b2b70969e8a345
Reviewed-on: https://go-review.googlesource.com/5310
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
These don't work with the new compiler, because the
new compiler doesn't have the custom syntax errors
that I built for the old compiler. It will, just not yet.
(Issue #9968.)
Change-Id: I658f7dab2c7f855340a501f9ae4479c097b28cd3
Reviewed-on: https://go-review.googlesource.com/5632
Reviewed-by: Rob Pike <r@golang.org>
The main issue is that the misc/cgo/{stdio,life} tests are silently
getting skipped when invoked from run.bash.
run.go should ignore any build tags after the first blank line in
source file. It already checks for test actions only upto the first
blank line. Build tags must be specified in the same block.
See http://golang.org/cl/3675 for background.
Change-Id: Id8abf000119e3335f7250d8ef34aac7811fc9dff
Reviewed-on: https://go-review.googlesource.com/3812
Reviewed-by: Minux Ma <minux@golang.org>
* bug248, bug345, bug369, and bug429 were ported from bash commands to run scripts. bug369 remains disabled.
* bug395 is a test for issue 1909, which is still open. It is marked as skip now and will be usable with compile with run.go when issue 1909 is fixed.
Fixes#4139
Updates #1909
Change-Id: Ibb5fbfb5cf72ddc285829245318eeacd3fb5a636
Reviewed-on: https://go-review.googlesource.com/1774
Reviewed-by: Russ Cox <rsc@golang.org>
The remaining run-only tests will be migrated to run.go in another CL.
This CL will break the build due to issues 8746 and 8806.
Update #4139
Update #8746
Update #8806
LGTM=rsc
R=rsc, bradfitz, iant
CC=golang-codereviews
https://golang.org/cl/144630044
Following CL 68150047, the goos and goarch
variables are not currently set when the GOOS
and GOARCH environment variables are not set.
This made the content of the build tag to be
ignored in this case.
This CL sets goos and goarch to runtime.GOOS
and runtime.GOARCH when the GOOS and GOARCH
environments variables are not set.
LGTM=aram, bradfitz
R=golang-codereviews, aram, gobot, rsc, dave, bradfitz
CC=golang-codereviews, rsc
https://golang.org/cl/112490043
This matters for NaCl, which seems to swamp my 4-core MacBook Pro otherwise.
It's not a correctness problem, just a usability problem.
LGTM=bradfitz
R=bradfitz
CC=golang-codereviews
https://golang.org/cl/98600046
Some of the errorcheck tests have many many identical regexps.
Use a map to avoid storing the compiled form many many times
in memory. Change the filterRe to a simple string to avoid
the expense of those regexps as well.
Cuts the time for run.go on index2.go by almost 50x.
Noticed during debugging of issue 7344.
LGTM=bradfitz
R=bradfitz, josharian
CC=golang-codereviews
https://golang.org/cl/74380043
See golang.org/s/go13nacl for design overview.
This CL is the mostly mechanical changes from rsc's Go 1.2 based NaCl branch, specifically 39cb35750369 to 500771b477cf from https://code.google.com/r/rsc-go13nacl. This CL does not include working NaCl support, there are probably two or three more large merges to come.
CL 15750044 is not included as it involves more invasive changes to the linker which will need to be merged separately.
The exact change lists included are
15050047: syscall: support for Native Client
15360044: syscall: unzip implementation for Native Client
15370044: syscall: Native Client SRPC implementation
15400047: cmd/dist, cmd/go, go/build, test: support for Native Client
15410048: runtime: support for Native Client
15410049: syscall: file descriptor table for Native Client
15410050: syscall: in-memory file system for Native Client
15440048: all: update +build lines for Native Client port
15540045: cmd/6g, cmd/8g, cmd/gc: support for Native Client
15570045: os: support for Native Client
15680044: crypto/..., hash/crc32, reflect, sync/atomic: support for amd64p32
15690044: net: support for Native Client
15690048: runtime: support for fake time like on Go Playground
15690051: build: disable various tests on Native Client
LGTM=rsc
R=rsc
CC=golang-codereviews
https://golang.org/cl/68150047
Update #6853
For an ephemeral binary - one created, run, and then deleted -
there is no need to write dwarf debug information, since the
binary will not be used with gdb. In this case, instruct the linker
not to spend time and disk space generating the debug information
by passing the -w flag to the linker.
Omitting dwarf information reduces the size of most binaries by 25%.
We may be more aggressive about this in the future.
LGTM=bradfitz, r
R=r, bradfitz
CC=golang-codereviews
https://golang.org/cl/65890043
The commands being run are 'go tool this' and 'go tool that',
and the go command will call Getwd during its init.
R=golang-dev, iant
CC=golang-dev
https://golang.org/cl/7336045
Expressions involving nil, even if they can be evaluated
at compile time, do not count as Go constants and cannot
be used in const initializers.
Fixes#4673.
Fixes#4680.
R=ken2
CC=golang-dev
https://golang.org/cl/7278043
runoutput styles tests generally consume a lot of memory. On arm platforms rotate?.go consume around 200mb each to compile, and as tests are sorted alphabetically, they all tend to run at once.
This change limits the number of runoutput jobs to 2 on arm platforms.
R=minux.ma, remyoudompheng, bradfitz, lucio.dere
CC=golang-dev
https://golang.org/cl/7099047
The patch makes the compile user an ordinary package-local
symbol for the name of embedded fields of builtin type.
This is incompatible with the fix delivered for issue 2687
(revision 3c060add43fb) but fixes it in a different way, because
the explicit symbol on the field makes the typechecker able to
find it in lookdot.
Fixes#3552.
R=lvd, rsc, daniel.morsing
CC=golang-dev
https://golang.org/cl/6866047
Running this test via "bash run" uncovered three different
bugs (4344, 4348, 4353). We need to run it by default.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/6832043
The other tests either need a complex procedure
or are architecture- or OS-dependent.
Update #4139.
R=golang-dev, daniel.morsing, iant
CC=golang-dev
https://golang.org/cl/6618062
testlib will complain about any unmatched errors left in errorchecks while run.go will not.
Fixes#4141.
R=golang-dev, minux.ma, remyoudompheng, rsc
CC=golang-dev
https://golang.org/cl/6614060
