Adding the evconst(n) call for OANDAND and OOROR in
golang.org/cl/18262 was originally just to parallel the above iscmp
branch, but upon further inspection it seemed odd that removing it
caused test/fixedbugs/issue6671.go's
var b mybool
// ...
b = bool(true) && true // ERROR "cannot use"
to start failing (i.e., by not emitting the expected "cannot use"
error).
The problem is that evconst(n)'s settrue and setfalse paths always
reset n.Type to idealbool, even for logical operators where n.Type
should preserve the operand type. Adding the evconst(n) call for
OANDAND/OOROR inadvertantly worked around this by turning the later
evconst(n) call at line 2167 into a noop, so the "n.Type = t"
assignment at line 739 would preserve the operand type.
However, that means evconst(n) was still clobbering n.Type for ONOT,
so declarations like:
const _ bool = !mybool(true)
were erroneously accepted.
Update #13821.
Change-Id: I18e37287f05398fdaeecc0f0d23984e244f025da
Reviewed-on: https://go-review.googlesource.com/18362
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
On Windows, externalthreadhandler currently sets the assumed stack
size for the profiler thread and the ctrlhandler threads to 8KB. The
actual stack size is determined by the SizeOfStackReserve field in the
binary set by the linker, which is currently at least 64KB (and
typically 128KB).
It turns out the profiler thread is running within a few words of the
8KB-(stack guard) bound set by externalthreadhandler. If it overflows
this bound, morestack crashes unceremoniously with an access
violation, which we then fail to handle, causing the whole process to
exit without explanation.
To avoid this problem and give us some breathing room, increase the
assumed stack size in externalthreadhandler to 32KB (there's some
unknown amount of stack already in use, so it's not safe to increase
this all the way to the reserve size).
We also document the relationships between externalthreadhandler and
SizeOfStackReserve to make this more obvious in the future.
Change-Id: I2f9f9c0892076d78e09827022ff0f2bedd9680a9
Reviewed-on: https://go-review.googlesource.com/18304
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Minux Ma <minux@golang.org>
Simply checking the exit code of `git rev-parse --git-dir` should
suffice here, but that requires deviating from the infrastructure
provided by `run`, so I've left that for a future change.
Originally by Tamir Duberstein but updated by iant & rsc to add
the filepath.Join logic.
Fixes#11211 (again).
Change-Id: I6d29b5ae39ba456088ae1fb5d41014cb91c86897
Reviewed-on: https://go-review.googlesource.com/18323
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The flag is already named -insecure. Make it more so.
If we're willing to accept HTTP, it's not much worse to accept
HTTPS man-in-the-middle attacks too. This allows servers
with self-signed certificates to work.
Fixes#13197.
Change-Id: Ia5491410bc886da0a26ef3bce4bf7d732f5e19e4
Reviewed-on: https://go-review.googlesource.com/18324
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This time with a test.
Also adjust another test to skip when hg is not present,
and delete no longer needed fixDetachedHead code.
Fixes#9032 (again).
Change-Id: I481717409e1d44b524f83c70a8dc377699d1a2a5
Reviewed-on: https://go-review.googlesource.com/18334
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We don't use these for benchmarking anymore.
Now we have the go1 dir and the benchmarks subrepo.
Some have problematic copyright notices, so move out of main repo.
Preserved in golang.org/x/exp/shootout.
Fixes#12688.
Fixes#13584.
Change-Id: Ic0b71191ca1a286d33d7813aca94bab1617a1c82
Reviewed-on: https://go-review.googlesource.com/18320
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Simply checking the exit code of `git rev-parse --git-dir` should
suffice here, but that requires deviating from the infrastructure
provided by `run`, so I've left that for a future change.
Fixes#11211.
Change-Id: I7cbad86a8a06578f52f66f734f5447b597ddc962
Reviewed-on: https://go-review.googlesource.com/18213
Reviewed-by: Russ Cox <rsc@golang.org>
Before golang.org/cl/13921, "go install -buildmode=shared prefix/..." created a
file called "libprefix.so", which was obviously a problem when prefix was
something like "." or "../". However, now it expands the ... into all the
matched packages, joins them with -, which can clearly be a very long name
indeed. Because I plan to build shared libraries for Ubuntu by running commands
exactly like "go install -buildmode=shared prefix/...", this special cases this
to produce the old behaviour (but de-relativises prefix first).
Fixes#13714
Change-Id: I4fd8d4934279f9a18cc70a13e4ef3e23f6abcb6e
Reviewed-on: https://go-review.googlesource.com/18114
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Added a format option to inhibit output of .Note field in
printing, and enabled that option during export.
Added test.
Fixes#13777.
Change-Id: I739f9785eb040f2fecbeb96d5a9ceb8c1ca0f772
Reviewed-on: https://go-review.googlesource.com/18217
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
When 'go tool dist test' stops, it was intended that it first wait for
pending background tests, like a failed compilation waits for pending
background compiles. But these three lines prevented that.
Fix by deleting them. (The actual loop already contains the correct
logic to avoid running the others and to wait for what's left.)
Change-Id: I4e945495ada903fb0af567910626241bc1c52ba6
Reviewed-on: https://go-review.googlesource.com/18232
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL changes the source file information in the
standard library's .a files to say "$GOROOT/src/runtime/chan.go"
(with a literal "$GOROOT") instead of spelling out the actual directory.
The linker then substitutes the actual $GOROOT (or $GOROOT_FINAL)
as appropriate.
If people download a binary distribution to an alternate location,
following the instructions at https://golang.org/doc/install#install,
the code before this CL would end up with source paths pointing to
/usr/local/go no matter where the actual sources were.
Now the source paths for built binaries will point to the actual sources
(hopefully).
The source line information in distributed binaries is not affected:
those will still say /usr/local/go. But binaries people build themselves
(their own programs, not the go distribution programs) will be correct.
Fixing this path also fixes the lookup of the runtime-gdb.py file.
Fixes#5533.
Change-Id: I03729baae3fbd8cd636e016275ee5ad2606e4663
Reviewed-on: https://go-review.googlesource.com/18200
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I broke the rule: never click the Submit button on the web.
Change-Id: If81a5cc31c1f28664960bad124cc596f5cab1222
Reviewed-on: https://go-review.googlesource.com/18203
Reviewed-by: Russ Cox <rsc@golang.org>
These find approximately nothing.
Takes 5% off my all.bash run time.
For #10571.
Change-Id: I21d3a844af756eb37f59bba0064f24995626da0d
Reviewed-on: https://go-review.googlesource.com/18198
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Takes 15% off my all.bash run time
(after this and earlier CLs, now down to 3½ from 5½ minutes).
For #10571.
Change-Id: Iac316ffb730c9ff0a0faa7cc3b82ed4f7e6d4361
Reviewed-on: https://go-review.googlesource.com/18088
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Mostly we just care that the test binaries link and start up.
No need to run the full test suites.
Takes 12% off my all.bash run time.
For #10571.
Change-Id: I01af618f3d51deb841ea638424e1389a2df7d746
Reviewed-on: https://go-review.googlesource.com/18086
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
I'm tired of having to remember it on every command.
Rebuilding everything is the wrong default.
This CL updates the build script, but the builders may
(or may not) need work, depending on whether they
rebuild using the test command (I doubt it).
Change-Id: I21f202a2f13e73df3f6bd54ae6a317c467b68151
Reviewed-on: https://go-review.googlesource.com/18084
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The test for non-package main top-level inputs is done while parsing
the export data. Issue #13468 happened because we were not parsing
the export data when using compiler-generated archives
(that is, when using go tool compile -pack).
Fix this by parsing the export data even for archives.
However, that turns up a different problem: the export data check
reports (one assumes spurious) skew errors now, because it has
not been run since Go 1.2.
(Go 1.3 was the first release to use go tool compile -pack.)
Since the code hasn't run since Go 1.2, it can't be that important.
Since it doesn't work today, just delete it.
Figuring out how to make this code work with Robert's export
format was one of the largest remaining TODOs for that format.
Now we don't have to.
Fixes#13468 and makes the world a better place.
Change-Id: I40a4b284cf140d49d48b714bd80762d6889acdb9
Reviewed-on: https://go-review.googlesource.com/17976
Reviewed-by: Robert Griesemer <gri@golang.org>
Since we allow non-200 responses from HTTPS in normal operation,
it seems odd to reject them in -insecure operation.
Fixes#13037 (again).
Change-Id: Ie232f7544ab192addfad407525888db6b967befe
Reviewed-on: https://go-review.googlesource.com/17945
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The change here is to move the closeBody call into the if block.
The logging adjustments are just arranging to tell the truth:
in particular if we're not in insecure mode and we get a non-200
error then we do not actually ignore the response
(except as caused by closing the body incorrectly).
As the comment below the change indicates, it is intentional that
we process non-200 pages. The code does process them, because
the if err != nil || status != 200 block does not return.
But that block does close the body, which depending on timing
can apparently poison the later read from the body.
See #13037's initial report:
$ go get -v bosun.org/cmd/bosun/cache
Fetching https://bosun.org/cmd/bosun/cache?go-get=1
ignoring https fetch with status code 404
Parsing meta tags from https://bosun.org/cmd/bosun/cache?go-get=1 (status code 404)
import "bosun.org/cmd/bosun/cache": parsing bosun.org/cmd/bosun/cache: http: read on closed response body
package bosun.org/cmd/bosun/cache: unrecognized import path "bosun.org/cmd/bosun/cache"
The log print about ignoring the https fetch is not strictly true,
since the next thing that happened was parsing the body of that fetch.
But the read on the closed response body failed during parsing.
Moving the closeBody to happen only when we're about to discard the
result and start over (that is, only in -insecure mode) fixes the parse.
At least it should fix the parse. I can't seem to break the parse anymore,
because of #13648 (close not barring future reads anymore),
but this way is clearly better than the old way. If nothing else the old code
closed the body twice when err != nil and -insecure was not given.
Fixes#13037.
Change-Id: Idf57eceb6d5518341a2f7f75eb8f8ab27ed4e0b4
Reviewed-on: https://go-review.googlesource.com/17944
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This caused #13657.
Reverting fixes#13657.
I was trying to be helpful by fixing #12313,
but I don't need the fix myself.
Will leave for someone with more motivation.
This reverts commit 3e9f063670.
Change-Id: Ifc78a6196f23e0f58e3b9ad7340e207a2d5de0a6
Reviewed-on: https://go-review.googlesource.com/17977
Reviewed-by: Russ Cox <rsc@golang.org>
Thanks to @toxeus on GitHub for the test case.
Fixes#12612.
Change-Id: I0c32fbe5044f3552053460a5347c062568093dff
Reviewed-on: https://go-review.googlesource.com/17974
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Also update many call sites where I forgot that the permission
argument is going to be masked by umask.
Fixes#12692.
Change-Id: I52b315b06236122ca020950447863fa396b68abd
Reviewed-on: https://go-review.googlesource.com/17950
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This makes go get gitserver/~user/repo.git/foo work.
Fixes#9193.
Change-Id: I8c9d4096903288f7f0e82d6ed1aa78bf038fb81a
Reviewed-on: https://go-review.googlesource.com/17952
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This doesn't happen enough in the tests to be worth debugging.
Empirically, I expect this to add 5 seconds to the overall 'go test -short cmd/go'
on systems with precise file systems, and nothing on systems without them
(like my Mac).
Fixes#12205.
Change-Id: I0a17cb37bdedcfc0f921c5ee658737f1698c153b
Reviewed-on: https://go-review.googlesource.com/17953
Reviewed-by: Ian Lance Taylor <iant@golang.org>
No test because the code has no test.
Fixes#12313.
Change-Id: I2cfd0a0422c0cd76f0371c2d3bbbdf5bb3b3f1eb
Reviewed-on: https://go-review.googlesource.com/17951
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Thanks to Albert Hafvenström for the diagnosis.
Fixes#11246.
Change-Id: I2b9e670c0ecf6aa01e5bf4d7a402619e93cc4f4a
Reviewed-on: https://go-review.googlesource.com/17942
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If cgo is turned off, there may not be an external linker available.
Fixes#13450.
Change-Id: Idbf3f3f57b4bb3908b67264f96d276acc952102a
Reviewed-on: https://go-review.googlesource.com/17941
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Maybe it will say something that helps the user understand the problem.
Note that we can't use os/exec.ExitError's new Stderr field because
cmd/dist is compiled with Go 1.4.
Fixes#13099.
Change-Id: I4b5910434bf324d1b85107002a64684d8ba14dc8
Reviewed-on: https://go-review.googlesource.com/17940
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This uses weak declarations so that it will work with current versions
of gccgo that do not support pointer checking.
Change-Id: Ia34507e3231ac60517cb6834f0b673764715a256
Reviewed-on: https://go-review.googlesource.com/17429
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The new flag -args stops flag processing, leaving the rest of the command line
to be passed to the underlying test binary verbatim. Thus, both of these pass
a literal -v -n on the test binary command line, without putting the go command
into verbose mode or disabling execution of commands:
go test . -args -v -n
go test -args -v -n
Also try to make the documentation a bit clearer.
Fixes#7221.
Fixes#12177.
Change-Id: Ief9e830a6fbb9475d96011716a86e2524a35eceb
Reviewed-on: https://go-review.googlesource.com/17775
Reviewed-by: Rob Pike <r@golang.org>