mirror of
https://github.com/golang/go
synced 2024-11-14 09:00:21 -07:00
26407b2212
3630 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Cholerae Hu
|
7f86080476 |
cmd/compile: don't addLocalInductiveFacts if there is no direct edge from if block to phi block
Currently in addLocalInductiveFacts, we only check whether direct edge from if block to phi block exists. If not, the following logic will treat the phi block as the first successor, which is wrong. This patch makes prove pass more conservative, so we disable some cases in test/prove.go. We will do some optimization in the following CL and enable these cases then. Fixes #40367. Change-Id: I27cf0248f3a82312a6f7dabe11c79a1a34cf5412 Reviewed-on: https://go-review.googlesource.com/c/go/+/244579 Reviewed-by: Zach Jones <zachj1@gmail.com> Reviewed-by: Keith Randall <khr@golang.org> Run-TryBot: Keith Randall <khr@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> |
||
Keith Randall
|
c4fed25553 |
cmd/compile: add floating point load+op operations to addressing modes pass
They were missed as part of the refactoring to use a separate addressing modes pass. Fixes #40426 Change-Id: Ie0418b2fac4ba1ffe720644ac918f6d728d5e420 Reviewed-on: https://go-review.googlesource.com/c/go/+/244859 Run-TryBot: Keith Randall <khr@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Cherry Zhang <cherryyz@google.com> |
||
Alberto Donizetti
|
11f92e9dae |
cmd/compile: add test for fixed ICE on untyped conversion
The ICE reported as #33308 was fixed by a related CL; this change adds a regression test with the crasher. Fixes #33308 Change-Id: I3260075dbe3823b56b8825e6269e57a0fad185a6 Reviewed-on: https://go-review.googlesource.com/c/go/+/243458 Reviewed-by: Matthew Dempsky <mdempsky@google.com> |
||
|
Keith Randall
|
3b2f67a597 |
cmd/compile: remove check that Zero's arg has the correct base type
It doesn't have to. The type in the aux field is authoritative.
There are cases involving casting from interface{} where pointers
have a placeholder pointer type (because the type is not known when
the IData op is generated).
The check was introduced in CL 13447.
Fixes #39459
Change-Id: Id77a57577806a271aeebd20bea5d92d08ee7aa6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/239817
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
|
||
|
Keith Randall
|
3dec253783 |
reflect: zero stack slots before writing to them with write barriers
reflect.assignTo writes to the target using write barriers. Make sure that the memory it is writing to is zeroed, so the write barrier does not read pointers from uninitialized memory. Fixes #39541 Change-Id: Ia64b2cacc193bffd0c1396bbce1dfb8182d4905b Reviewed-on: https://go-review.googlesource.com/c/go/+/238760 Run-TryBot: Keith Randall <khr@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Ian Lance Taylor <iant@golang.org> |
||
Michael Munday
|
377c1536f5 |
cmd/compile: mark s390x int <-> float conversions as clobbering flags
These conversion instructions set the condition code and so should be marked as clobbering flags. Fixes #39651. Change-Id: I91cc9687ea70ef0551bb3139c1875071c349d43e Reviewed-on: https://go-review.googlesource.com/c/go/+/238628 Run-TryBot: Michael Munday <mike.munday@ibm.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Cherry Zhang <cherryyz@google.com> |
||
|
Keith Randall
|
8c8045fd38 |
cmd/compile: fix ordering problems in struct equality
Make sure that if a field comparison might panic, we evaluate (and short circuit if not equal) all previous fields, and don't evaluate any subsequent fields. Add a bunch more tests to the equality+panic checker. Update #8606 Change-Id: I6a159bbc8da5b2b7ee835c0cd1fc565575b58c46 Reviewed-on: https://go-review.googlesource.com/c/go/+/237919 Run-TryBot: Keith Randall <khr@golang.org> Reviewed-by: Matthew Dempsky <mdempsky@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> |
||
|
Michael Munday
|
ac743dea8e |
cmd/compile: always tighten and de-duplicate tuple selectors
The scheduler assumes two special invariants that apply to tuple selectors (Select0 and Select1 ops): 1. There is only one tuple selector of each type per generator. 2. Tuple selectors and generators reside in the same block. Prior to this CL the assumption was that these invariants would only be broken by the CSE pass. The CSE pass therefore contained code to move and de-duplicate selectors to fix these invariants. However it is also possible to write relatively basic optimization rules that cause these invariants to be broken. For example: (A (Select0 (B))) -> (Select1 (B)) This rule could result in the newly added selector (Select1) being in a different block to the tuple generator (see issue #38356). It could also result in duplicate selectors if this rule matches multiple times for the same tuple generator (see issue #39472). The CSE pass will 'fix' these invariants. However it will only do so when optimizations are enabled (since disabling optimizations disables the CSE pass). This CL moves the CSE tuple selector fixup code into its own pass and makes it mandatory even when optimizations are disabled. This allows tuple selectors to be treated like normal ops for most of the compilation pipeline until after the new pass has run, at which point we need to be careful to maintain the invariant again. Fixes #39472. Change-Id: Ia3f79e09d9c65ac95f897ce37e967ee1258a080b Reviewed-on: https://go-review.googlesource.com/c/go/+/237118 Run-TryBot: Michael Munday <mike.munday@ibm.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Keith Randall <khr@golang.org> |
||
Xiangdong Ji
|
e031318ca6 |
cmd/compile: ARM comparisons with 0 incorrect on overflow
Some ARM rewriting rules convert 'comparing to zero' conditions of if statements to a simplified version utilizing CMN and CMP instructions to branch over condition flags, in order to save one Add or Sub caculation. Such optimizations lead to wrong branching in case an overflow/underflow occurs when executing CMN or CMP. Fix the issue by introducing new block opcodes that don't honor the overflow/underflow flag: Block-Op Meaning ARM condition codes 1. LTnoov less than MI 2. GEnoov greater than or equal PL 3. LEnoov less than or equal MI || EQ 4. GTnoov greater than NEQ & PL The patch also adds a few test cases to cover scenarios that are specific to ARM and fine-tunes the code generation tests for 'x-const'. For more details please refer to the previous fix on 64-bit ARM: https://go-review.googlesource.com/c/go/+/233097 Go1 perf, 'old' is the non-optimized version, that is removing all concerned rewriting rules. name old time/op new time/op delta BinaryTree17-8 7.73s ± 0% 7.81s ± 0% +0.97% (p=0.000 n=7+8) Fannkuch11-8 7.06s ± 0% 7.00s ± 0% -0.83% (p=0.000 n=8+8) FmtFprintfEmpty-8 181ns ± 1% 183ns ± 1% +1.31% (p=0.001 n=8+8) FmtFprintfString-8 319ns ± 1% 325ns ± 2% +1.71% (p=0.009 n=7+8) FmtFprintfInt-8 358ns ± 1% 359ns ± 1% ~ (p=0.293 n=7+7) FmtFprintfIntInt-8 459ns ± 3% 456ns ± 1% ~ (p=0.869 n=8+8) FmtFprintfPrefixedInt-8 535ns ± 4% 538ns ± 4% ~ (p=0.572 n=8+8) FmtFprintfFloat-8 1.01µs ± 2% 1.01µs ± 2% ~ (p=0.625 n=8+8) FmtManyArgs-8 1.93µs ± 2% 1.93µs ± 1% ~ (p=0.979 n=8+7) GobDecode-8 16.1ms ± 1% 16.5ms ± 1% +2.32% (p=0.000 n=8+8) GobEncode-8 15.9ms ± 0% 15.8ms ± 1% -1.00% (p=0.000 n=8+7) Gzip-8 690ms ± 1% 670ms ± 0% -2.90% (p=0.000 n=8+8) Gunzip-8 109ms ± 1% 109ms ± 1% ~ (p=0.694 n=7+8) HTTPClientServer-8 149µs ± 3% 146µs ± 2% -1.70% (p=0.028 n=8+8) JSONEncode-8 50.5ms ± 1% 49.2ms ± 0% -2.60% (p=0.001 n=7+7) JSONDecode-8 135ms ± 2% 137ms ± 1% ~ (p=0.054 n=8+7) Mandelbrot200-8 951ms ± 0% 952ms ± 0% ~ (p=0.852 n=6+8) GoParse-8 9.47ms ± 1% 9.66ms ± 1% +2.01% (p=0.000 n=8+8) RegexpMatchEasy0_32-8 288ns ± 2% 277ns ± 2% -3.61% (p=0.000 n=8+8) RegexpMatchEasy0_1K-8 1.66µs ± 1% 1.69µs ± 2% +2.21% (p=0.001 n=7+7) RegexpMatchEasy1_32-8 334ns ± 1% 305ns ± 2% -8.86% (p=0.000 n=8+8) RegexpMatchEasy1_1K-8 2.14µs ± 2% 2.15µs ± 0% ~ (p=0.099 n=8+8) RegexpMatchMedium_32-8 13.3ns ± 1% 13.3ns ± 0% ~ (p=1.000 n=7+7) RegexpMatchMedium_1K-8 81.1µs ± 3% 80.7µs ± 1% ~ (p=0.955 n=7+8) RegexpMatchHard_32-8 4.26µs ± 0% 4.26µs ± 0% ~ (p=0.933 n=7+8) RegexpMatchHard_1K-8 124µs ± 0% 124µs ± 0% +0.31% (p=0.000 n=8+8) Revcomp-8 14.7ms ± 2% 14.5ms ± 1% -1.66% (p=0.003 n=8+8) Template-8 197ms ± 2% 200ms ± 3% +1.62% (p=0.021 n=8+8) TimeParse-8 1.33µs ± 1% 1.30µs ± 1% -1.86% (p=0.002 n=8+8) TimeFormat-8 3.04µs ± 1% 3.02µs ± 0% -0.60% (p=0.000 n=8+8) name old speed new speed delta GobDecode-8 47.6MB/s ± 1% 46.5MB/s ± 1% -2.28% (p=0.000 n=8+8) GobEncode-8 48.1MB/s ± 0% 48.6MB/s ± 1% +1.02% (p=0.000 n=8+7) Gzip-8 28.1MB/s ± 1% 29.0MB/s ± 0% +2.97% (p=0.000 n=8+8) Gunzip-8 178MB/s ± 1% 179MB/s ± 2% ~ (p=0.694 n=7+8) JSONEncode-8 38.4MB/s ± 1% 39.4MB/s ± 0% +2.67% (p=0.001 n=7+7) JSONDecode-8 14.3MB/s ± 2% 14.2MB/s ± 1% -0.81% (p=0.043 n=8+7) GoParse-8 6.12MB/s ± 1% 5.99MB/s ± 1% -2.00% (p=0.000 n=8+8) RegexpMatchEasy0_32-8 111MB/s ± 2% 115MB/s ± 2% +3.77% (p=0.000 n=8+8) RegexpMatchEasy0_1K-8 618MB/s ± 1% 604MB/s ± 2% -2.16% (p=0.001 n=7+7) RegexpMatchEasy1_32-8 95.7MB/s ± 1% 105.1MB/s ± 2% +9.76% (p=0.000 n=8+8) RegexpMatchEasy1_1K-8 479MB/s ± 2% 477MB/s ± 0% ~ (p=0.105 n=8+8) RegexpMatchMedium_32-8 75.2MB/s ± 1% 75.2MB/s ± 0% ~ (p=0.247 n=7+7) RegexpMatchMedium_1K-8 12.6MB/s ± 3% 12.7MB/s ± 1% ~ (p=0.538 n=7+8) RegexpMatchHard_32-8 7.52MB/s ± 0% 7.52MB/s ± 0% ~ (p=0.968 n=7+8) RegexpMatchHard_1K-8 8.26MB/s ± 0% 8.24MB/s ± 0% -0.30% (p=0.001 n=8+8) Revcomp-8 173MB/s ± 2% 176MB/s ± 1% +1.68% (p=0.003 n=8+8) Template-8 9.85MB/s ± 2% 9.69MB/s ± 3% -1.59% (p=0.021 n=8+8) Fixes #39303 Updates #38740 Change-Id: I0a5f87bfda679f66414c0041ace2ca2e28363f36 Reviewed-on: https://go-review.googlesource.com/c/go/+/236637 Run-TryBot: Keith Randall <khr@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Keith Randall <khr@golang.org> |
||
Dmitri Shuralyov
|
ee379d2b08 |
all: treat all files as binary, but check in .bat with CRLF
This is a followup to CL 96495. It should be simpler and more robust to achieve .bat files having CRLF line endings by treating it as a binary file, like all other files, and checking it in with the desired CRLF line endings. A test is used to check the entire Go tree, short of directories starting with "." and named "testdata", for any .bat files that have anything other than strict CRLF line endings. This will help catch any accidental modifications to existing .bat files or check ins of new .bat files. Importantly, this is compatible with how Gerrit serves .tar.gz files, making it so that CRLF line endings are preserved. The Go project is supported on many different environments, some of which may have limited git implementations available, or none at all. Relying on fewer git features and special rules makes it easier to have confidence in the exact content of all files. Additionally, Go development started in Subversion, moved to Perforce, then Mercurial, and now uses Git.¹ Reducing its reliance on git-specific features will help if there will be another transition in the project's future. There are only 5 .bat files in the entire Go source tree, so a new one being added is a rare event, and we prefer to do things in Go instead. We still have the option of improving the experience for developers by adding a pre-commit converter for .bat files to the git-codereview tool. ¹ https://groups.google.com/d/msg/golang-dev/sckirqOWepg/YmyT7dWJiocJ Fixes #39391. For #37791. Change-Id: I6e202216322872f0307ac96f1b8d3f57cb901e6b Reviewed-on: https://go-review.googlesource.com/c/go/+/236437 Reviewed-by: Bryan C. Mills <bcmills@google.com> |
||
|
Keith Randall
|
f72d7cfc8f |
cmd/compile: add interface equality tests
Add interfaces which differ in type. Those used so far only differ in value, not type. These additional tests are needed to generate a failure before CL 236278 went in. Update #8606 Change-Id: Icdb7647b1973c2fff7e5afe2bd8b8c1b384f583e Reviewed-on: https://go-review.googlesource.com/c/go/+/236418 Run-TryBot: Keith Randall <khr@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Matthew Dempsky <mdempsky@google.com> |
||
|
Keith Randall
|
9984ef824c |
cmd/compile: test that equality is evaluated in order
Make sure that we compare fields of structs and elements of arrays in order, with proper short-circuiting. Update #8606 Change-Id: I0a66ad92ea0af7bcc56dfdb275dec2b8d7e8b4fe Reviewed-on: https://go-review.googlesource.com/c/go/+/236147 Run-TryBot: Keith Randall <khr@golang.org> Reviewed-by: Matthew Dempsky <mdempsky@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> |
||
Richard Musiol
|
0452f9460f |
runtime: fix race condition between timer and event handler
This change fixes a race condition between beforeIdle waking up the innermost event handler and a timer causing a different goroutine to wake up at the exact same moment. This messes up the wasm event handling and leads to memory corruption. The solution is to make beforeIdle return the goroutine that must run next and have findrunnable pick this goroutine without considering timers again. Fixes #38093 Fixes #38574 Change-Id: Iffbe99411d25c2730953d1c8b0741fd892f8e540 Reviewed-on: https://go-review.googlesource.com/c/go/+/230178 Run-TryBot: Richard Musiol <neelance@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Cherry Zhang <cherryyz@google.com> |
||
|
Xiangdong Ji
|
e8f5a33191 |
cmd/compile: fix incorrect rewriting to if condition
Some ARM64 rewriting rules convert 'comparing to zero' conditions of if
statements to a simplified version utilizing CMN and CMP instructions to
branch over condition flags, in order to save one Add or Sub caculation.
Such optimizations lead to wrong branching in case an overflow/underflow
occurs when executing CMN or CMP.
Fix the issue by introducing new block opcodes that don't honor the
overflow/underflow flag, in the following categories:
Block-Op Meaning ARM condition codes
1. LTnoov less than MI
2. GEnoov greater than or equal PL
3. LEnoov less than or equal MI || EQ
4. GTnoov greater than NEQ & PL
The backend generates two consecutive branch instructions for 'LEnoov'
and 'GTnoov' to model their expected behavior. A slight change to 'gc'
and amd64/386 backends is made to unify the code generation.
Add a test 'TestCondRewrite' as justification, it covers 32 incorrect rules
identified on arm64, more might be needed on other arches, like 32-bit arm.
Add two benchmarks profiling the aforementioned category 1&2 and category
3&4 separetely, we expect the first two categories will show performance
improvement and the second will not result in visible regression compared with
the non-optimized version.
This change also updates TestFormats to support using %#x.
Examples exhibiting where does the issue come from:
1: 'if x + 3 < 0' might be converted to:
before:
CMN $3, R0
BGE <else branch> // wrong branch is taken if 'x+3' overflows
after:
CMN $3, R0
BPL <else branch>
2: 'if y - 3 > 0' might be converted to:
before:
CMP $3, R0
BLE <else branch> // wrong branch is taken if 'y-3' underflows
after:
CMP $3, R0
BMI <else branch>
BEQ <else branch>
Benchmark data from different kinds of arm64 servers, 'old' is the non-optimized
version (not the parent commit), generally the optimization version outperforms.
S1:
name old time/op new time/op delta
CondRewrite/SoloJump 13.6ns ± 0% 12.9ns ± 0% -5.15% (p=0.000 n=10+10)
CondRewrite/CombJump 13.8ns ± 1% 12.9ns ± 0% -6.32% (p=0.000 n=10+10)
S2:
name old time/op new time/op delta
CondRewrite/SoloJump 11.6ns ± 0% 10.9ns ± 0% -6.03% (p=0.000 n=10+10)
CondRewrite/CombJump 11.4ns ± 0% 10.8ns ± 1% -5.53% (p=0.000 n=10+10)
S3:
name old time/op new time/op delta
CondRewrite/SoloJump 7.36ns ± 0% 7.50ns ± 0% +1.79% (p=0.000 n=9+10)
CondRewrite/CombJump 7.35ns ± 0% 7.75ns ± 0% +5.51% (p=0.000 n=8+9)
S4:
name old time/op new time/op delta
CondRewrite/SoloJump-224 11.5ns ± 1% 10.9ns ± 0% -4.97% (p=0.000 n=10+10)
CondRewrite/CombJump-224 11.9ns ± 0% 11.5ns ± 0% -2.95% (p=0.000 n=10+10)
S5:
name old time/op new time/op delta
CondRewrite/SoloJump 10.0ns ± 0% 10.0ns ± 0% -0.45% (p=0.000 n=9+10)
CondRewrite/CombJump 9.93ns ± 0% 9.77ns ± 0% -1.53% (p=0.000 n=10+9)
Go1 perf. data:
name old time/op new time/op delta
BinaryTree17 6.29s ± 1% 6.30s ± 1% ~ (p=1.000 n=5+5)
Fannkuch11 5.40s ± 0% 5.40s ± 0% ~ (p=0.841 n=5+5)
FmtFprintfEmpty 97.9ns ± 0% 98.9ns ± 3% ~ (p=0.937 n=4+5)
FmtFprintfString 171ns ± 3% 171ns ± 2% ~ (p=0.754 n=5+5)
FmtFprintfInt 212ns ± 0% 217ns ± 6% +2.55% (p=0.008 n=5+5)
FmtFprintfIntInt 296ns ± 1% 297ns ± 2% ~ (p=0.516 n=5+5)
FmtFprintfPrefixedInt 371ns ± 2% 374ns ± 7% ~ (p=1.000 n=5+5)
FmtFprintfFloat 435ns ± 1% 439ns ± 2% ~ (p=0.056 n=5+5)
FmtManyArgs 1.37µs ± 1% 1.36µs ± 1% ~ (p=0.730 n=5+5)
GobDecode 14.6ms ± 4% 14.4ms ± 4% ~ (p=0.690 n=5+5)
GobEncode 11.8ms ±20% 11.6ms ±15% ~ (p=1.000 n=5+5)
Gzip 507ms ± 0% 491ms ± 0% -3.22% (p=0.008 n=5+5)
Gunzip 73.8ms ± 0% 73.9ms ± 0% ~ (p=0.690 n=5+5)
HTTPClientServer 116µs ± 0% 116µs ± 0% ~ (p=0.686 n=4+4)
JSONEncode 21.8ms ± 1% 21.6ms ± 2% ~ (p=0.151 n=5+5)
JSONDecode 104ms ± 1% 103ms ± 1% -1.08% (p=0.016 n=5+5)
Mandelbrot200 9.53ms ± 0% 9.53ms ± 0% ~ (p=0.421 n=5+5)
GoParse 7.55ms ± 1% 7.51ms ± 1% ~ (p=0.151 n=5+5)
RegexpMatchEasy0_32 158ns ± 0% 158ns ± 0% ~ (all equal)
RegexpMatchEasy0_1K 606ns ± 1% 608ns ± 3% ~ (p=0.937 n=5+5)
RegexpMatchEasy1_32 143ns ± 0% 144ns ± 1% ~ (p=0.095 n=5+4)
RegexpMatchEasy1_1K 927ns ± 2% 944ns ± 2% ~ (p=0.056 n=5+5)
RegexpMatchMedium_32 16.0ns ± 0% 16.0ns ± 0% ~ (all equal)
RegexpMatchMedium_1K 69.3µs ± 2% 69.7µs ± 0% ~ (p=0.690 n=5+5)
RegexpMatchHard_32 3.73µs ± 0% 3.73µs ± 1% ~ (p=0.984 n=5+5)
RegexpMatchHard_1K 111µs ± 1% 110µs ± 0% ~ (p=0.151 n=5+5)
Revcomp 1.91s ±47% 1.77s ±68% ~ (p=1.000 n=5+5)
Template 138ms ± 1% 138ms ± 1% ~ (p=1.000 n=5+5)
TimeParse 787ns ± 2% 785ns ± 1% ~ (p=0.540 n=5+5)
TimeFormat 729ns ± 1% 726ns ± 1% ~ (p=0.151 n=5+5)
Updates #38740
Change-Id: I06c604874acdc1e63e66452dadee5df053045222
Reviewed-on: https://go-review.googlesource.com/c/go/+/233097
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
|
||
Josh Bleecher Snyder
|
364a05e2fe |
cmd/compile: add test for issue 37246
CL 233857 fixed the underlying issue for #37246, which had arisen again as #38916. Add the test case from #37246 to ensure it stays fixed. Fixes #37246 Change-Id: If7fd75a096d2ce4364dc15509253c3882838161d Reviewed-on: https://go-review.googlesource.com/c/go/+/233941 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Michael Munday <mike.munday@ibm.com> |
||
|
Michael Munday
|
f073395b73 |
cmd/compile: fix tuple selector bug in CSE pass
When tuple generators and selectors are eliminated as part of the CSE pass we may end up with tuple selectors that are in different blocks to the tuple generators that they correspond to. This breaks the invariant that tuple generators and their corresponding selectors must be in the same block. Therefore after CSE this situation must be corrected. Unfortunately the fixup code did not take into account that selectors could be eliminated by CSE. It assumed that only the tuple generators could be eliminated. In some situations this meant that it got into a state where it was replacing references to selectors with references to dead selectors in the wrong block. To fix this we move the fixup code after the CSE rewrites have been applied. This removes any difficult-to-reason-about interactions with the CSE rewriter. Fixes #38916. Change-Id: I2211982dcdba399d03299f0a819945b3eb93b291 Reviewed-on: https://go-review.googlesource.com/c/go/+/233857 Run-TryBot: Michael Munday <mike.munday@ibm.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Keith Randall <khr@golang.org> Reviewed-by: Cherry Zhang <cherryyz@google.com> |
||
|
Keith Randall
|
2cb10d42b7 |
cmd/compile: in prove, zero right shifts of positive int by #bits - 1
Taking over Zach's CL 212277. Just cleaned up and added a test.
For a positive, signed integer, an arithmetic right shift of count
(bit-width - 1) equals zero. e.g. int64(22) >> 63 -> 0. This CL makes
prove replace these right shifts with a zero-valued constant.
These shifts may arise in source code explicitly, but can also be
created by the generic rewrite of signed division by a power of 2.
// Signed divide by power of 2.
// n / c = n >> log(c) if n >= 0
// = (n+c-1) >> log(c) if n < 0
// We conditionally add c-1 by adding n>>63>>(64-log(c))
(first shift signed, second shift unsigned).
(Div64 <t> n (Const64 [c])) && isPowerOfTwo(c) ->
(Rsh64x64
(Add64 <t> n (Rsh64Ux64 <t>
(Rsh64x64 <t> n (Const64 <typ.UInt64> [63]))
(Const64 <typ.UInt64> [64-log2(c)])))
(Const64 <typ.UInt64> [log2(c)]))
If n is known to be positive, this rewrite includes an extra Add and 2
extra Rsh. This CL will allow prove to replace one of the extra Rsh with
a 0. That replacement then allows lateopt to remove all the unneccesary
fixups from the generic rewrite.
There is a rewrite rule to handle this case directly:
(Div64 n (Const64 [c])) && isNonNegative(n) && isPowerOfTwo(c) ->
(Rsh64Ux64 n (Const64 <typ.UInt64> [log2(c)]))
But this implementation of isNonNegative really only handles constants
and a few special operations like len/cap. The division could be
handled if the factsTable version of isNonNegative were available.
Unfortunately, the first opt pass happens before prove even has a
chance to deduce the numerator is non-negative, so the generic rewrite
has already fired and created the extra Ops discussed above.
Fixes #36159
By Printf count, this zeroes 137 right shifts when building std and cmd.
Change-Id: Iab486910ac9d7cfb86ace2835456002732b384a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/232857
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
|
||
Emmanuel T Odeke
|
7cbee12444 |
cmd/compile: improve error when setting unexported fields
Improve the error user experience when users try to set/refer
to unexported fields and methods of struct literals, by directly saying
"cannot refer to unexported field or method"
Fixes #31053
Change-Id: I6fd3caf64b7ca9f9d8ea60b7756875e340792d59
Reviewed-on: https://go-review.googlesource.com/c/go/+/201657
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
|
||
|
Emmanuel T Odeke
|
26de581a70 |
cmd/compile: omit file:pos for non-existent errors
Omits printing the file:line:column when trying to
open non-existent files
Given:
go tool compile x.go
* Before:
x.go:0: open x.go: no such file or directory
* After:
open x.go: no such file or directory
Reverts the revert in CL 231043 by only fixing the case
of non-existent errors which is what the original bug
was about. The fix for "permission errors" will come later
on when I have bandwidth to investigate the differences
between running with root and why os.Open works for some
builders and not others.
Fixes #36437
Change-Id: I9c8a0981ad708b504bb43990a4105b42266fa41f
Reviewed-on: https://go-review.googlesource.com/c/go/+/230941
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
|
||
Martin Möhrmann
|
6ed4661807 |
cmd/compile: optimize make+copy pattern to avoid memclr
match: m = make([]T, x); copy(m, s) for pointer free T and x==len(s) rewrite to: m = mallocgc(x*elemsize(T), nil, false); memmove(&m, &s, x*elemsize(T)) otherwise rewrite to: m = makeslicecopy([]T, x, s) This avoids memclear and shading of pointers in the newly created slice before the copy. With this CL "s" is only be allowed to bev a variable and not a more complex expression. This restriction could be lifted in future versions of this optimization when it can be proven that "s" is not referencing "m". Triggers 450 times during make.bash.. Reduces go binary size by ~8 kbyte. name old time/op new time/op delta MakeSliceCopy/mallocmove/Byte 71.1ns ± 1% 65.8ns ± 0% -7.49% (p=0.000 n=10+9) MakeSliceCopy/mallocmove/Int 71.2ns ± 1% 66.0ns ± 0% -7.27% (p=0.000 n=10+8) MakeSliceCopy/mallocmove/Ptr 104ns ± 4% 99ns ± 1% -5.13% (p=0.000 n=10+10) MakeSliceCopy/makecopy/Byte 70.3ns ± 0% 68.0ns ± 0% -3.22% (p=0.000 n=10+9) MakeSliceCopy/makecopy/Int 70.3ns ± 0% 68.5ns ± 1% -2.59% (p=0.000 n=9+10) MakeSliceCopy/makecopy/Ptr 102ns ± 0% 99ns ± 1% -2.97% (p=0.000 n=9+9) MakeSliceCopy/nilappend/Byte 75.4ns ± 0% 74.9ns ± 2% -0.63% (p=0.015 n=9+9) MakeSliceCopy/nilappend/Int 75.6ns ± 0% 76.4ns ± 3% ~ (p=0.245 n=9+10) MakeSliceCopy/nilappend/Ptr 107ns ± 0% 108ns ± 1% +0.93% (p=0.005 n=9+10) Fixes #26252 Change-Id: Iec553dd1fef6ded16197216a472351c8799a8e71 Reviewed-on: https://go-review.googlesource.com/c/go/+/146719 Reviewed-by: Keith Randall <khr@golang.org> Run-TryBot: Martin Möhrmann <moehrmann@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> |
||
Cuong Manh Le
|
0f47c12a29 |
cmd/compile: do not emit code for discardable blank fields
Fixes #38690 Change-Id: I3544daf617fddc0f89636265c113001178d16b0c Reviewed-on: https://go-review.googlesource.com/c/go/+/230121 Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Matthew Dempsky <mdempsky@google.com> |
||
|
Keith Randall
|
b4ecafc986 |
cmd/compile: restrict bit test rewrite rules
The {AND,OR,XOR}const ops can only take an int32 as an argument.
Make sure that when rewriting a BTx op to one of these, the result
has no high-order bits.
Fixes #38746
Change-Id: Ia7c5f76952329f60974bc033c29a5433610f3b28
Reviewed-on: https://go-review.googlesource.com/c/go/+/231977
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
|
||
|
Keith Randall
|
9ed0fb42e3 |
cmd/compile: add indexed memory modification ops to amd64
name old time/op new time/op delta Modify-16 404ns ± 1% 365ns ± 1% -9.73% (p=0.000 n=10+10) ConstModify-16 407ns ± 0% 385ns ± 2% -5.56% (p=0.000 n=9+10) Seems to generally help generated code. Binary size change is in the noise. Change-Id: I57891bfaf0f7dfc5d143bb9f7ebafc7079d2614f Reviewed-on: https://go-review.googlesource.com/c/go/+/228098 Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com> |
||
|
Keith Randall
|
882ec701d2 |
cmd/compile: add indexed load+op operations to amd64
name old time/op new time/op delta LoadAdd-16 545ns ± 0% 456ns ± 0% -16.31% (p=0.000 n=10+10) Update #36468 Change-Id: I84f390d55490648fa1f58cdbc24fd74c4f1bc8c1 Reviewed-on: https://go-review.googlesource.com/c/go/+/227960 Run-TryBot: Keith Randall <khr@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com> |
||
Austin Clements
|
eda6fe3572 |
Revert "cmd/compile: omit file:pos for non-existent, permission errors"
This reverts commit
|
||
|
Emmanuel T Odeke
|
4f7053c87f |
cmd/compile: omit file:pos for non-existent, permission errors
Omits printing the file:line:column when trying to open either
* non-existent files
* files without permission
Given:
go tool compile x.go
For either of x.go not existing, or if no read permissions:
* Before:
x.go:0: open x.go: no such file or directory
x.go:0: open x.go: permission denied
* After:
open x.go: no such file or directory
open x.go: permission denied
While here, noticed an oddity with the Linux builders, that appear
to always be running under root, hence the test for permission errors
with 0222 -W-*-W-*-W- can't pass on linux-amd64 builders.
The filed bug is #38608.
Fixes #36437
Change-Id: I9645ef73177c286c99547e3a0f3719fa07b35cb5
Reviewed-on: https://go-review.googlesource.com/c/go/+/229357
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
|
||
|
Josh Bleecher Snyder
|
4a7e363288 |
cmd/compile: optimize Move with all-zero ro sym src to Zero
We set up static symbols during walk that we later make copies of to initialize local variables. It is difficult to ascertain at that time exactly when copying a symbol is profitable vs locally initializing an autotmp. During SSA, we are much better placed to optimize. This change recognizes when we are copying from a global readonly all-zero symbol and replaces it with direct zeroing. This often allows the all-zero symbol to be deadcode eliminated at link time. This is not ideal--it makes for large object files, and longer link times--but it is the cleanest fix I could find. This makes the final binary for the program in #38554 shrink from >500mb to ~2.2mb. It also shrinks the standard binaries: file before after Δ % addr2line 4412496 4404304 -8192 -0.186% buildid 2893816 2889720 -4096 -0.142% cgo 4841048 4832856 -8192 -0.169% compile 19926480 19922432 -4048 -0.020% cover 5281816 5277720 -4096 -0.078% link 6734648 6730552 -4096 -0.061% nm 4366240 4358048 -8192 -0.188% objdump 4755968 4747776 -8192 -0.172% pprof 14653060 14612100 -40960 -0.280% trace 11805940 11777268 -28672 -0.243% vet 7185560 7181416 -4144 -0.058% total 113588440 113465560 -122880 -0.108% And not just by removing unnecessary symbols; the program text shrinks a bit as well. Fixes #38554 Change-Id: I8381ae6084ae145a5e0cd9410c451e52c0dc51c8 Reviewed-on: https://go-review.googlesource.com/c/go/+/229704 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> Reviewed-by: Keith Randall <khr@golang.org> |
||
Matthew Dempsky
|
a44d06d3b4 |
cmd/compile: use fixVariadicCall in escape analysis
This CL uses fixVariadicCall before escape analyzing function calls. This has a number of benefits, though also some minor obstacles: Most notably, it allows us to remove ODDDARG along with the logic involved in setting it up, manipulating EscHoles, and later copying its escape analysis flags to the actual slice argument. Instead, we uniformly handle all variadic calls the same way. (E.g., issue31573.go is updated because now f() and f(nil...) are handled identically.) It also allows us to simplify handling of builtins and generic function calls. Previously handling of calls was hairy enough to require multiple dispatches on n.Op, whereas now the logic is uniform enough that we can easily handle it with a single dispatch. The downside is handling //go:uintptrescapes is now somewhat clumsy. (It used to be clumsy, but it still is, too.) The proper fix here is probably to stop using escape analysis tags for //go:uintptrescapes and unsafe-uintptr, and have an earlier pass responsible for them. Finally, note that while we now call fixVariadicCall in Escape, we still have to call it in Order, because we don't (yet) run Escape on all compiler-generated functions. In particular, the generated "init" function for initializing package-level variables can contain calls to variadic functions and isn't escape analyzed. Passes toolstash-check -race. Change-Id: I4cdb92a393ac487910aeee58a5cb8c1500eef881 Reviewed-on: https://go-review.googlesource.com/c/go/+/229759 Run-TryBot: Matthew Dempsky <mdempsky@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com> |
||
|
Josh Bleecher Snyder
|
e7c1873691 |
cmd/compile: optimize x & 1 != 0 to x & 1 on amd64
Triggers a handful of times in std+cmd. Change-Id: I9bb8ce9a5f8bae2547cb61157cd8f256e1b63e76 Reviewed-on: https://go-review.googlesource.com/c/go/+/229602 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Keith Randall <khr@golang.org> |
||
|
Michael Munday
|
ab7a65f283 |
cmd/compile: clean up codegen for branch-on-carry on s390x
This CL optimizes code that uses a carry from a function such as
bits.Add64 as the condition in an if statement. For example:
x, c := bits.Add64(a, b, 0)
if c != 0 {
panic("overflow")
}
Rather than converting the carry into a 0 or a 1 value and using
that as an input to a comparison instruction the carry flag is now
used as the input to a conditional branch directly. This typically
removes an ADD LOGICAL WITH CARRY instruction when user code is
doing overflow detection and is closer to the code that a user
would expect to generate.
Change-Id: I950431270955ab72f1b5c6db873b6abe769be0da
Reviewed-on: https://go-review.googlesource.com/c/go/+/219757
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
|
||
|
Matthew Dempsky
|
2a2423bd05 |
cmd/compile: more precise analysis of method values
Previously for a method value "x.M", we always flowed x directly to the heap, which led to the receiver argument generally needing to be heap allocated. This CL changes it to flow x to the closure and M's receiver parameter. This allows receiver arguments to be stack allocated as long as (1) the closure never escapes, *and* (2) method doesn't leak its receiver parameter. Within the standard library, this allows a handful of objects to be stack allocated instead. Listed here are diagnostics that were previously emitted by "go build -gcflags=-m std cmd" that are no longer emitted: archive/tar/writer.go:118:6: moved to heap: f archive/tar/writer.go:208:6: moved to heap: f archive/tar/writer.go:248:6: moved to heap: f cmd/compile/internal/gc/initorder.go:252:2: moved to heap: d cmd/compile/internal/gc/initorder.go:75:2: moved to heap: s cmd/go/internal/generate/generate.go:206:7: &Generator literal escapes to heap cmd/internal/obj/arm64/asm7.go:910:2: moved to heap: c cmd/internal/obj/mips/asm0.go:415:2: moved to heap: c cmd/internal/obj/pcln.go:294:22: new(pcinlineState) escapes to heap cmd/internal/obj/s390x/asmz.go:459:2: moved to heap: c crypto/tls/handshake_server.go:56:2: moved to heap: hs Thanks to Cuong Manh Le for help coming up with this solution. Fixes #27557. Change-Id: I8c85d671d07fb9b53e11d2dd05949a34dbbd7e17 Reviewed-on: https://go-review.googlesource.com/c/go/+/228263 Run-TryBot: Matthew Dempsky <mdempsky@google.com> Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com> Reviewed-by: Cherry Zhang <cherryyz@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> |
||
|
Michael Munday
|
e464d7d797 |
cmd/compile: optimize comparisons with immediates on s390x
When generating code for unsigned equals (==) and not equals (!=) comparisons we currently, on s390x, always use signed comparisons. This mostly works well, however signed comparisons on s390x sign extend their immediates and unsigned comparisons zero extend them. For compare-and-branch instructions which can only have 8-bit immediates this significantly changes the range of immediate values we can represent: [-128, 127] for signed comparisons and [0, 255] for unsigned comparisons. When generating equals and not equals checks we don't neet to worry about whether the comparison is signed or unsigned. This CL therefore adds rules to allow us to switch signedness for such comparisons if it means that it brings a constant into range for an 8-bit immediate. For example, a signed equals with an integer in the range [128, 255] will now be implemented using an unsigned compare-and-branch instruction rather than separate compare and branch instructions. As part of this change I've also added support for adding a name to block control values using the same `x:(...)` syntax we use for value rules. Triggers 792 times when compiling cmd and std. Change-Id: I77fa80a128f0a8ce51a2888d1e384bd5e9b61a77 Reviewed-on: https://go-review.googlesource.com/c/go/+/228642 Run-TryBot: Michael Munday <mike.munday@ibm.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Keith Randall <khr@golang.org> |
||
Russ Cox
|
768201729d |
cmd/compile: detect and diagnose invalid //go: directive placement
Thie CL changes cmd/compile/internal/syntax to give the gc half of
the compiler more control over pragma handling, so that it can prepare
better errors, diagnose misuse, and so on. Before, the API between
the two was hard-coded as a uint16. Now it is an interface{}.
This should set us up better for future directives.
In addition to the split, this CL emits a "misplaced compiler directive"
error for any directive that is in a place where it has no effect.
I've certainly been confused in the past by adding comments
that were doing nothing and not realizing it. This should help
avoid that kind of confusion.
The rule, now applied consistently, is that a //go: directive
must appear on a line by itself immediately before the declaration
specifier it means to apply to. See cmd/compile/doc.go for
precise text and test/directive.go for examples.
This may cause some code to stop compiling, but that code
was broken. For example, this code formerly applied the
//go:noinline to f (not c) but now will fail to compile:
//go:noinline
const c = 1
func f() {}
Change-Id: Ieba9b8d90a27cfab25de79d2790a895cefe5296f
Reviewed-on: https://go-review.googlesource.com/c/go/+/228578
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
|
||
alex-semenyuk
|
876c1feb7d |
test/codegen, runtime/pprof, runtime: apply fmt
Change-Id: Ife4e065246729319c39e57a4fbd8e6f7b37724e1
GitHub-Last-Rev:
|
||
|
Josh Bleecher Snyder
|
50b11318fe |
cmd/compile: use oneBit instead of isPowerOfTwo in bit optimization
This optimization works on any integer with exactly one bit set. This is identical to being a power of two, except in the most negative number. Use oneBit instead. The rule now triggers in a few more places in std+cmd, in packages encoding/asn1, crypto/elliptic, and vendor/golang.org/x/crypto/cryptobyte. This change obviates the need for CL 222479 by doing this optimization consistently in the compiler. Change-Id: I983c6235290fdc634fda5e11b10f1f8ce041272f Reviewed-on: https://go-review.googlesource.com/c/go/+/229124 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org> |
||
|
alex-semenyuk
|
d0d0028207 |
test: remove duplicate code from makechan/makemap
Change-Id: Ib9bcfaa12d42bf9d2045aef035080b1a990a8b98
GitHub-Last-Rev:
|
||
Cherry Zhang
|
a32262d462 |
cmd/compile: when marking REFLECTMETHOD, check for reflect package itself
reflect.Type.Method (and MethodByName) can be used to obtain a reference of a method by reflection. The linker needs to know if reflect.Type.Method is called, and retain all exported methods accordingly. This is handled by the compiler, which marks the caller of reflect.Type.Method with REFLECTMETHOD attribute. The current code failed to handle the reflect package itself, so the method wrapper reflect.Type.Method is not marked. This CL fixes it. Fixes #38515. Change-Id: I12904d23eda664cf1794bc3676152f3218fb762b Reviewed-on: https://go-review.googlesource.com/c/go/+/228880 Run-TryBot: Cherry Zhang <cherryyz@google.com> Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> |
||
|
Russ Cox
|
8ce21fae60 |
test: add copyright notice to typecheck.go
Also gofmt. Change-Id: I36ac990965250867574f8e2318b65b87a0beda04 Reviewed-on: https://go-review.googlesource.com/c/go/+/228697 Reviewed-by: Ian Lance Taylor <iant@golang.org> |
||
|
Josh Bleecher Snyder
|
29d925dfcf |
test: add test for nil check / bounds check compiler confusion
This test started failing at CL 228106 and was fixed by CL 228677. Fixes #38496 Change-Id: I2dadcd99227347e8d28179039f5f345e728c4595 Reviewed-on: https://go-review.googlesource.com/c/go/+/228698 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Matthew Dempsky <mdempsky@google.com> Reviewed-by: Keith Randall <khr@golang.org> |
||
David Chase
|
e4e192484b |
cmd/compile: split up the addressing mode on OpAMD64CMP*loadidx* always
Benchmarking suggests that the combo instruction is notably slower, at least in the places where we measure. Updates #37955 Change-Id: I829f1975dd6edf38163128ba51d84604055512f4 Reviewed-on: https://go-review.googlesource.com/c/go/+/228157 Run-TryBot: David Chase <drchase@google.com> Reviewed-by: Keith Randall <khr@golang.org> |
||
|
Michael Munday
|
334d410ae3 |
cmd/compile: fix incorrect block for s390x Select1 op
When inserting Select0 and Select1 ops we need to ensure that they live in the same block as their argument. This is because they need to be scheduled immediately after their argument for register and flag allocation to work correctly. Fixes #38356. Change-Id: Iba384dbe87010f1c7c4ce909f08011e5f1de7fd5 Reviewed-on: https://go-review.googlesource.com/c/go/+/227879 Run-TryBot: Michael Munday <mike.munday@ibm.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Keith Randall <khr@golang.org> |
||
|
Josh Bleecher Snyder
|
2db4cc38a0 |
cmd/compile: improve generated code for concrete cases in type switches
Consider
switch x:= x.(type) {
case int:
// int stmts
case error:
// error stmts
}
Prior to this change, we lowered this roughly as:
if x, ok := x.(int); ok {
// int stmts
} else if x, ok := x.(error); ok {
// error stmts
}
x, ok := x.(error) is implemented with a call to runtime.assertE2I2 or runtime.assertI2I2.
x, ok := x.(int) generates inline code that checks whether x has type int,
and populates x and ok as appropriate. We then immediately branch again on ok.
The shortcircuit pass in the SSA backend is designed to recognize situations
like this, in which we are immediately branching on a bool value
that we just calculated with a branch.
However, the shortcircuit pass has limitations when the intermediate state has phis.
In this case, the phi value is x (the int).
CL 222923 improved the situation, but many cases are still unhandled.
I have further improvements in progress, which is how I found this particular problem,
but they are expensive, and may or may not see the light of day.
In the common case of a lone concrete type in a type switch case,
it is easier and cheaper to simply lower a different way, roughly:
if _, ok := x.(int); ok {
x := x.(int)
// int stmts
}
Instead of using a type assertion, though, we extract the value of x
from the interface directly.
This removes the need to track x (the int) across the branch on ok,
which removes the phi, which lets the shortcircuit pass do its job.
Benchmarks for encoding/binary show improvements, as well as some
wild swings on the super fast benchmarks (alignment effects?):
name old time/op new time/op delta
ReadSlice1000Int32s-8 5.25µs ± 2% 4.87µs ± 3% -7.11% (p=0.000 n=44+49)
ReadStruct-8 451ns ± 2% 417ns ± 2% -7.39% (p=0.000 n=45+46)
WriteStruct-8 412ns ± 2% 405ns ± 3% -1.58% (p=0.000 n=46+48)
ReadInts-8 296ns ± 8% 275ns ± 3% -7.23% (p=0.000 n=48+50)
WriteInts-8 324ns ± 1% 318ns ± 2% -1.67% (p=0.000 n=44+49)
WriteSlice1000Int32s-8 5.21µs ± 2% 4.92µs ± 1% -5.67% (p=0.000 n=46+44)
PutUint16-8 0.58ns ± 2% 0.59ns ± 2% +0.63% (p=0.000 n=49+49)
PutUint32-8 0.87ns ± 1% 0.58ns ± 1% -33.10% (p=0.000 n=46+44)
PutUint64-8 0.66ns ± 2% 0.87ns ± 2% +33.07% (p=0.000 n=47+48)
LittleEndianPutUint16-8 0.86ns ± 2% 0.87ns ± 2% +0.55% (p=0.003 n=47+50)
LittleEndianPutUint32-8 0.87ns ± 1% 0.87ns ± 1% ~ (p=0.547 n=45+47)
LittleEndianPutUint64-8 0.87ns ± 2% 0.87ns ± 1% ~ (p=0.451 n=46+47)
ReadFloats-8 79.8ns ± 5% 75.9ns ± 2% -4.83% (p=0.000 n=50+47)
WriteFloats-8 89.3ns ± 1% 88.9ns ± 1% -0.48% (p=0.000 n=46+44)
ReadSlice1000Float32s-8 5.51µs ± 1% 4.87µs ± 2% -11.74% (p=0.000 n=47+46)
WriteSlice1000Float32s-8 5.51µs ± 1% 4.93µs ± 1% -10.60% (p=0.000 n=48+47)
PutUvarint32-8 25.9ns ± 2% 24.0ns ± 2% -7.02% (p=0.000 n=48+50)
PutUvarint64-8 75.1ns ± 1% 61.5ns ± 2% -18.12% (p=0.000 n=45+47)
[Geo mean] 57.3ns 54.3ns -5.33%
Despite the rarity of type switches, this generates noticeably smaller binaries.
file before after Δ %
addr2line 4413296 4409200 -4096 -0.093%
api 5982648 5962168 -20480 -0.342%
cgo 4854168 4833688 -20480 -0.422%
compile 19694784 19682560 -12224 -0.062%
cover 5278008 5265720 -12288 -0.233%
doc 4694824 4682536 -12288 -0.262%
fix 3411336 3394952 -16384 -0.480%
link 6721496 6717400 -4096 -0.061%
nm 4371152 4358864 -12288 -0.281%
objdump 4760960 4752768 -8192 -0.172%
pprof 14810820 14790340 -20480 -0.138%
trace 11681076 11668788 -12288 -0.105%
vet 8285464 8244504 -40960 -0.494%
total 115824120 115627576 -196544 -0.170%
Compiler performance is marginally improved (note that go/types has many type switches):
name old alloc/op new alloc/op delta
Template 35.0MB ± 0% 35.0MB ± 0% +0.09% (p=0.008 n=5+5)
Unicode 28.5MB ± 0% 28.5MB ± 0% ~ (p=0.548 n=5+5)
GoTypes 114MB ± 0% 114MB ± 0% -0.76% (p=0.008 n=5+5)
Compiler 541MB ± 0% 541MB ± 0% -0.03% (p=0.008 n=5+5)
SSA 1.17GB ± 0% 1.17GB ± 0% ~ (p=0.841 n=5+5)
Flate 21.9MB ± 0% 21.9MB ± 0% ~ (p=0.421 n=5+5)
GoParser 26.9MB ± 0% 26.9MB ± 0% ~ (p=0.222 n=5+5)
Reflect 74.6MB ± 0% 74.6MB ± 0% ~ (p=1.000 n=5+5)
Tar 32.9MB ± 0% 32.8MB ± 0% ~ (p=0.056 n=5+5)
XML 42.4MB ± 0% 42.1MB ± 0% -0.77% (p=0.008 n=5+5)
[Geo mean] 73.2MB 73.1MB -0.15%
name old allocs/op new allocs/op delta
Template 377k ± 0% 377k ± 0% +0.06% (p=0.008 n=5+5)
Unicode 354k ± 0% 354k ± 0% ~ (p=0.095 n=5+5)
GoTypes 1.31M ± 0% 1.30M ± 0% -0.73% (p=0.008 n=5+5)
Compiler 5.44M ± 0% 5.44M ± 0% -0.04% (p=0.008 n=5+5)
SSA 11.7M ± 0% 11.7M ± 0% ~ (p=1.000 n=5+5)
Flate 239k ± 0% 239k ± 0% ~ (p=1.000 n=5+5)
GoParser 302k ± 0% 302k ± 0% -0.04% (p=0.008 n=5+5)
Reflect 977k ± 0% 977k ± 0% ~ (p=0.690 n=5+5)
Tar 346k ± 0% 346k ± 0% ~ (p=0.889 n=5+5)
XML 431k ± 0% 430k ± 0% -0.25% (p=0.008 n=5+5)
[Geo mean] 806k 806k -0.10%
For packages with many type switches, this considerably shrinks function text size.
Some examples:
file before after Δ %
encoding/binary.s 30726 29504 -1222 -3.977%
go/printer.s 77597 76005 -1592 -2.052%
cmd/vendor/golang.org/x/tools/go/ast/astutil.s 65704 63318 -2386 -3.631%
cmd/vendor/golang.org/x/tools/go/analysis/passes/unreachable.s 8047 7714 -333 -4.138%
Text size regressions are rare.
Change-Id: Ic10982bbb04876250eaa5bfee97990141ae5fc28
Reviewed-on: https://go-review.googlesource.com/c/go/+/228106
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
|
||
|
Cherry Zhang
|
1b15c7f102 |
cmd/compile: debug rewrite
If -d=ssa/PASS/debug=N is specified (N >= 2) for a rewrite pass (e.g. lower), when a Value (or Block) is rewritten, print the Value (or Block) before and after. For #31915. Updates #19013. Change-Id: I80eadd44302ae736bc7daed0ef68529ab7a16776 Reviewed-on: https://go-review.googlesource.com/c/go/+/176718 Run-TryBot: Cherry Zhang <cherryyz@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Keith Randall <khr@golang.org> |
||
|
Keith Randall
|
83e288f3db |
cmd/compile: prevent constant folding of +/- when result is NaN
Missed as part of CL 221790. It isn't just * and / that can make NaNs. Update #36400 Fixes #38359 Change-Id: I3fa562f772fe03b510793a6dc0cf6189c0c3e652 Reviewed-on: https://go-review.googlesource.com/c/go/+/227860 Run-TryBot: Keith Randall <khr@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com> Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com> |
||
Ian Lance Taylor
|
162f1bf7c2 |
test: add test case that gccgo failed to compile
Change-Id: I08ca5f77b7352fe3ced1fbe3d027d6f5b4828e35 Reviewed-on: https://go-review.googlesource.com/c/go/+/227783 Run-TryBot: Ian Lance Taylor <iant@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Than McIntosh <thanm@google.com> |
||
Lynn Boger
|
a1550d3ca3 |
cmd/compile: use isel with variable shifts on ppc64x
This changes the code generated for variable length shift counts to use isel instead of instructions that set and read the carry flag. This reduces the generated code for shifts like this by 1 instruction and avoids the use of instructions to set and read the carry flag. This sequence can be found in strconv with these results on power9: Atof64Decimal 71.6ns ± 0% 68.3ns ± 0% -4.61% Atof64Float 95.3ns ± 0% 90.9ns ± 0% -4.62% Atof64FloatExp 153ns ± 0% 149ns ± 0% -2.61% Atof64Big 234ns ± 0% 232ns ± 0% -0.85% Atof64RandomBits 348ns ± 0% 369ns ± 0% +6.03% Atof64RandomFloats 262ns ± 0% 262ns ± 0% ~ Atof32Decimal 72.0ns ± 0% 68.2ns ± 0% -5.28% Atof32Float 92.1ns ± 0% 87.1ns ± 0% -5.43% Atof32FloatExp 159ns ± 0% 158ns ± 0% -0.63% Atof32Random 194ns ± 0% 191ns ± 0% -1.55% Some tests in codegen/shift.go are enabled to verify the expected instructions are generated. Change-Id: I968715d10ada405a8c46132bf19b8ed9b85796d1 Reviewed-on: https://go-review.googlesource.com/c/go/+/227337 Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Cherry Zhang <cherryyz@google.com> |
||
|
Josh Bleecher Snyder
|
ade0811dc8 |
cmd/compile: handle some additional phis in shortcircuit
Prior to this change, the shortcircuit pass could only
handle blocks containing only a single phi control value,
possibly wrapped in some OpNot and OpCopy values.
This change partially lifts this limitation.
It handles some cases in which the block contains other phi values.
This appears to happen most commonly in cases in which
the conditionals being checked involve the memory state,
in which case there is a phi memory value in the block.
The general idea here is to use the information we have about
the CFG to (1) move the other phi values into other blocks
and/or (2) rewrite uses of the other phi values in other blocks.
For example, consider this CFG:
p q
\ /
b
/ \
t u
And consider a phi value v in block b.
We'll write v = Phi(p: x, q: y) to say that v has value x corresponding
to inbound block p, and value y for block q.
We will rewrite this CFG to:
p q
| /
| b
|/ \
t u
What should we do with v?
Any uses of v in u can be replaced with y. Why?
If we are in block u, we came from b, and before that from q.
If prior to b we came from p, then we would have gone to t, not u.
Since we came from q, we know that v took the value y.
Uses of v in t are a bit more complicated.
It is going to end up being a phi value: Phi(p: ?, b: ?).
Suppose, after the rewrite, we came from block p.
Then, before the rewrite, we would have gone to b,
where v would have the value x.
So we have Phi(p: x, b: ?).
Suppose, after the rewrite, we came from block b.
Then we must have come from block q.
If we come from block q, v has value y.
So we have Phi(p: x, b: y).
Uses of v in t can thus be replaced with a new phi value,
with the same values as v, but with altered predecessors.
Similar reasoning can be employed to rewrite or replace
other uses of v elsewhere in the CFG, so that v itself can be eliminated,
and the CFG rewrite can proceed.
This change sets up the infrastructure for such optimizations
and adds a few cheap ones. All optimizations in this change depend
only on the shape of the CFG; future changes may also depend on where
v's uses are. That analysis is more powerful but more expensive,
and should be done incrementally.
The use of closures here is perhaps a bit unusual,
but during development it proved critical to having readable code.
We must decide early on whether we can safely do the CFG modifications,
and then later fix up the phis if so.
Safely storing state and decisions across these two phases is hard to do readably.
Closures solve the problem neatly.
I manually instrumented the code paths in shortcircuitPhiPlan.
During make.bash there are nearly 6000 invocations.
The least-visited code path gets run 85 times,
so all the code in this CL is reasonably well-exercised.
Here is a concrete example of code improved by this change:
func f(e interface{}) int {
if x, ok := e.(int); ok {
return x
}
return 0
}
Omitting PCDATA, FUNCDATA, and the like, it used to compile to:
"".f STEXT nosplit size=50 args=0x18 locals=0x0
0x0000 00000 (x.go:4) LEAQ type.int(SB), AX
0x0007 00007 (x.go:4) MOVQ "".e+8(SP), CX
0x000c 00012 (x.go:4) CMPQ AX, CX
0x000f 00015 (x.go:4) JNE 43
0x0011 00017 (x.go:4) MOVQ "".e+16(SP), AX
0x0016 00022 (x.go:4) MOVQ (AX), AX
0x0019 00025 (x.go:4) JNE 33
0x001b 00027 (x.go:5) MOVQ AX, "".~r1+24(SP)
0x0020 00032 (x.go:5) RET
0x0021 00033 (x.go:7) MOVQ $0, "".~r1+24(SP)
0x002a 00042 (x.go:7) RET
0x002b 00043 (x.go:7) MOVL $0, AX
0x0030 00048 (x.go:4) JMP 25
Afterwards, it compiles to:
"".f STEXT nosplit size=41 args=0x18 locals=0x0
0x0000 00000 (x.go:4) LEAQ type.int(SB), AX
0x0007 00007 (x.go:4) MOVQ "".e+8(SP), CX
0x000c 00012 (x.go:4) CMPQ AX, CX
0x000f 00015 (x.go:4) JNE 31
0x0011 00017 (x.go:4) MOVQ "".e+16(SP), AX
0x0016 00022 (x.go:4) MOVQ (AX), AX
0x0019 00025 (x.go:5) MOVQ AX, "".~r1+24(SP)
0x001e 00030 (x.go:5) RET
0x001f 00031 (x.go:7) MOVQ $0, "".~r1+24(SP)
0x0028 00040 (x.go:7) RET
Note that there is now only a single JNE and a single RET $0 path.
Updates #37608
Has a minor good effect on compilation speed and memory use.
Provides widespread improvements to generated code.
The rare, minor regressions I have investigated are due to
register allocation fluctuations.
file before after Δ %
addr2line 4376080 4371984 -4096 -0.094%
api 5945400 5933112 -12288 -0.207%
asm 5034312 5030216 -4096 -0.081%
buildid 2844952 2840856 -4096 -0.144%
cgo 4812872 4804680 -8192 -0.170%
compile 19622064 19610368 -11696 -0.060%
cover 5236648 5232552 -4096 -0.078%
dist 3658312 3654216 -4096 -0.112%
doc 4653512 4649416 -4096 -0.088%
fix 3370072 3365976 -4096 -0.122%
link 6671864 6667768 -4096 -0.061%
pprof 14781652 14761172 -20480 -0.139%
trace 11639684 11627396 -12288 -0.106%
vet 8252280 8231800 -20480 -0.248%
total 115052984 114934792 -118192 -0.103%
file before after Δ %
internal/cpu.s 3298 3296 -2 -0.061%
internal/bytealg.s 1730 1737 +7 +0.405%
cmd/vendor/golang.org/x/mod/semver.s 7332 7283 -49 -0.668%
image/color.s 8248 8156 -92 -1.115%
math.s 35966 35956 -10 -0.028%
math/cmplx.s 6596 6575 -21 -0.318%
runtime.s 480566 480053 -513 -0.107%
sync.s 16408 16385 -23 -0.140%
math/rand.s 10447 10406 -41 -0.392%
internal/reflectlite.s 28408 28366 -42 -0.148%
errors.s 2736 2701 -35 -1.279%
sort.s 17031 17036 +5 +0.029%
io.s 16993 16964 -29 -0.171%
container/heap.s 2006 1997 -9 -0.449%
text/tabwriter.s 9570 9552 -18 -0.188%
bytes.s 31823 31594 -229 -0.720%
strconv.s 52760 52717 -43 -0.082%
vendor/golang.org/x/text/transform.s 16713 16706 -7 -0.042%
strings.s 42590 42563 -27 -0.063%
bufio.s 22883 22785 -98 -0.428%
encoding/base32.s 9586 9531 -55 -0.574%
syscall.s 82237 82243 +6 +0.007%
image.s 37465 37452 -13 -0.035%
regexp/syntax.s 82827 82769 -58 -0.070%
image/draw.s 18698 18584 -114 -0.610%
image/jpeg.s 36560 36549 -11 -0.030%
time.s 82557 82526 -31 -0.038%
context.s 10863 10820 -43 -0.396%
regexp.s 64114 64049 -65 -0.101%
os.s 51751 51524 -227 -0.439%
reflect.s 168240 168049 -191 -0.114%
cmd/go/internal/lockedfile/internal/filelock.s 2317 2290 -27 -1.165%
path/filepath.s 17831 17766 -65 -0.365%
io/ioutil.s 6994 6990 -4 -0.057%
encoding/binary.s 30791 30726 -65 -0.211%
cmd/vendor/golang.org/x/sys/unix.s 78055 78033 -22 -0.028%
encoding/pem.s 9280 9247 -33 -0.356%
crypto/cipher.s 20376 20374 -2 -0.010%
os/exec.s 29229 29140 -89 -0.304%
internal/goroot.s 4588 4579 -9 -0.196%
cmd/internal/browser.s 2246 2240 -6 -0.267%
cmd/vendor/golang.org/x/crypto/ssh/terminal.s 27183 27149 -34 -0.125%
fmt.s 76625 76484 -141 -0.184%
encoding/hex.s 6154 6152 -2 -0.032%
compress/lzw.s 7063 7059 -4 -0.057%
database/sql/driver.s 18875 18862 -13 -0.069%
debug/plan9obj.s 8268 8266 -2 -0.024%
net/url.s 29724 29719 -5 -0.017%
encoding/csv.s 12872 12856 -16 -0.124%
debug/gosym.s 25303 25268 -35 -0.138%
compress/flate.s 50952 51019 +67 +0.131%
compress/zlib.s 7277 7266 -11 -0.151%
archive/zip.s 42155 42111 -44 -0.104%
debug/dwarf.s 107632 107541 -91 -0.085%
database/sql.s 98373 98028 -345 -0.351%
os/user.s 14722 14708 -14 -0.095%
encoding/json.s 105836 105711 -125 -0.118%
debug/macho.s 32598 32560 -38 -0.117%
encoding/gob.s 136478 135755 -723 -0.530%
debug/pe.s 31160 30869 -291 -0.934%
debug/elf.s 63495 63302 -193 -0.304%
vendor/golang.org/x/text/unicode/bidi.s 27220 27217 -3 -0.011%
vendor/golang.org/x/text/secure/bidirule.s 3363 3352 -11 -0.327%
go/token.s 12036 12035 -1 -0.008%
flag.s 22277 22256 -21 -0.094%
mime.s 39696 39509 -187 -0.471%
go/scanner.s 19033 19020 -13 -0.068%
archive/tar.s 70936 70581 -355 -0.500%
internal/xcoff.s 22823 22820 -3 -0.013%
text/scanner.s 11631 11629 -2 -0.017%
encoding/xml.s 110534 110408 -126 -0.114%
math/big.s 183636 183545 -91 -0.050%
image/gif.s 27376 27343 -33 -0.121%
crypto/dsa.s 6029 5969 -60 -0.995%
image/png.s 42947 42939 -8 -0.019%
crypto/rand.s 6866 6854 -12 -0.175%
vendor/golang.org/x/text/unicode/norm.s 66394 66354 -40 -0.060%
runtime/trace.s 2603 2521 -82 -3.150%
crypto/ed25519.s 6321 6300 -21 -0.332%
text/template/parse.s 93910 93844 -66 -0.070%
crypto/rsa.s 31460 31369 -91 -0.289%
encoding/asn1.s 57021 57023 +2 +0.004%
crypto/elliptic.s 51382 51363 -19 -0.037%
crypto/x509/pkix.s 10386 10342 -44 -0.424%
vendor/golang.org/x/net/idna.s 24482 24466 -16 -0.065%
vendor/golang.org/x/crypto/cryptobyte.s 33479 33280 -199 -0.594%
crypto/ecdsa.s 11936 11883 -53 -0.444%
go/constant.s 43670 42663 -1007 -2.306%
go/ast.s 80383 80191 -192 -0.239%
testing.s 68069 68057 -12 -0.018%
runtime/pprof.s 59613 59603 -10 -0.017%
testing/iotest.s 4895 4891 -4 -0.082%
internal/trace.s 78136 78089 -47 -0.060%
cmd/internal/goobj2.s 13158 13154 -4 -0.030%
cmd/internal/src.s 17661 17657 -4 -0.023%
go/parser.s 79046 78880 -166 -0.210%
cmd/internal/objabi.s 16367 16343 -24 -0.147%
text/template.s 94899 94486 -413 -0.435%
go/printer.s 77267 76992 -275 -0.356%
cmd/internal/goobj.s 25988 25947 -41 -0.158%
runtime/pprof/internal/profile.s 102066 101933 -133 -0.130%
go/format.s 5419 5371 -48 -0.886%
cmd/vendor/golang.org/x/arch/ppc64/ppc64asm.s 37181 37149 -32 -0.086%
go/doc.s 74533 74132 -401 -0.538%
html/template.s 88743 88389 -354 -0.399%
cmd/asm/internal/lex.s 24881 24872 -9 -0.036%
cmd/internal/buildid.s 18263 18256 -7 -0.038%
cmd/vendor/golang.org/x/arch/x86/x86asm.s 80036 79980 -56 -0.070%
go/build.s 68905 68737 -168 -0.244%
cmd/cover.s 46070 45950 -120 -0.260%
cmd/internal/obj.s 117001 116991 -10 -0.009%
cmd/doc.s 62700 62419 -281 -0.448%
cmd/internal/obj/arm.s 66745 66687 -58 -0.087%
cmd/compile/internal/syntax.s 145406 145062 -344 -0.237%
cmd/internal/obj/wasm.s 44049 44027 -22 -0.050%
net.s 291835 291020 -815 -0.279%
cmd/dist.s 209020 208807 -213 -0.102%
cmd/cgo.s 241564 241102 -462 -0.191%
vendor/golang.org/x/net/http/httpproxy.s 9407 9399 -8 -0.085%
log/syslog.s 7921 7909 -12 -0.151%
go/types.s 319325 317513 -1812 -0.567%
vendor/golang.org/x/net/http/httpguts.s 3834 3825 -9 -0.235%
mime/multipart.s 21414 21343 -71 -0.332%
cmd/internal/obj/ppc64.s 119949 119938 -11 -0.009%
cmd/compile/internal/logopt.s 10158 10118 -40 -0.394%
vendor/golang.org/x/net/nettest.s 28012 27991 -21 -0.075%
go/internal/srcimporter.s 6405 6380 -25 -0.390%
go/internal/gcimporter.s 34525 34493 -32 -0.093%
net/mail.s 23937 23720 -217 -0.907%
go/internal/gccgoimporter.s 56095 56038 -57 -0.102%
cmd/compile/internal/types.s 47247 47207 -40 -0.085%
cmd/api.s 39582 39558 -24 -0.061%
cmd/go/internal/base.s 12572 12551 -21 -0.167%
cmd/vendor/golang.org/x/xerrors.s 17846 17814 -32 -0.179%
cmd/vendor/golang.org/x/mod/sumdb/note.s 18142 18070 -72 -0.397%
cmd/go/internal/search.s 19994 19876 -118 -0.590%
cmd/go/internal/imports.s 16457 16428 -29 -0.176%
cmd/vendor/golang.org/x/mod/module.s 17838 17759 -79 -0.443%
cmd/go/internal/cache.s 30551 30514 -37 -0.121%
cmd/vendor/golang.org/x/mod/sumdb/tlog.s 36356 36321 -35 -0.096%
cmd/internal/test2json.s 9452 9408 -44 -0.466%
cmd/go/internal/mvs.s 25136 25092 -44 -0.175%
cmd/go/internal/txtar.s 3488 3461 -27 -0.774%
cmd/vendor/golang.org/x/mod/zip.s 18811 18800 -11 -0.058%
cmd/go/internal/version.s 11213 11171 -42 -0.375%
cmd/link/internal/benchmark.s 4941 4949 +8 +0.162%
cmd/internal/obj/s390x.s 126865 126849 -16 -0.013%
cmd/gofmt.s 30684 30596 -88 -0.287%
cmd/fix.s 87450 86906 -544 -0.622%
cmd/internal/obj/x86.s 88578 88556 -22 -0.025%
cmd/vendor/golang.org/x/mod/modfile.s 72450 72363 -87 -0.120%
cmd/oldlink/internal/loader.s 16743 16741 -2 -0.012%
cmd/pack.s 14863 14861 -2 -0.013%
cmd/go/internal/load.s 106742 106568 -174 -0.163%
cmd/oldlink/internal/objfile.s 21787 21780 -7 -0.032%
cmd/oldlink/internal/loadmacho.s 29309 29317 +8 +0.027%
cmd/oldlink/internal/loadelf.s 35013 35021 +8 +0.023%
cmd/asm/internal/asm.s 68550 68538 -12 -0.018%
cmd/link/internal/loader.s 94765 94564 -201 -0.212%
cmd/link/internal/loadelf.s 35663 35667 +4 +0.011%
cmd/link/internal/loadmacho.s 29501 29509 +8 +0.027%
cmd/vendor/golang.org/x/tools/go/analysis.s 4983 4976 -7 -0.140%
cmd/vendor/golang.org/x/tools/go/analysis/internal/analysisflags.s 16771 16709 -62 -0.370%
cmd/vendor/golang.org/x/tools/go/types/objectpath.s 18481 18456 -25 -0.135%
cmd/vendor/golang.org/x/tools/go/analysis/passes/internal/analysisutil.s 2100 2085 -15 -0.714%
cmd/vendor/github.com/google/pprof/profile.s 150141 149620 -521 -0.347%
cmd/vendor/github.com/google/pprof/internal/measurement.s 10420 10404 -16 -0.154%
cmd/vendor/golang.org/x/tools/go/analysis/passes/asmdecl.s 36814 36755 -59 -0.160%
cmd/vendor/golang.org/x/tools/go/analysis/passes/bools.s 6688 6673 -15 -0.224%
cmd/vendor/golang.org/x/tools/go/analysis/passes/cgocall.s 9856 9784 -72 -0.731%
cmd/vendor/golang.org/x/tools/go/analysis/passes/composite.s 3011 2979 -32 -1.063%
cmd/vendor/golang.org/x/tools/go/analysis/passes/copylock.s 9737 9682 -55 -0.565%
cmd/vendor/golang.org/x/tools/go/cfg.s 30738 30725 -13 -0.042%
cmd/vendor/github.com/ianlancetaylor/demangle.s 175195 174513 -682 -0.389%
cmd/vendor/golang.org/x/tools/go/analysis/passes/httpresponse.s 3625 3520 -105 -2.897%
cmd/vendor/golang.org/x/tools/go/analysis/passes/loopclosure.s 2987 2971 -16 -0.536%
cmd/vendor/golang.org/x/tools/go/analysis/passes/shift.s 4372 4340 -32 -0.732%
cmd/vendor/golang.org/x/tools/go/analysis/passes/stdmethods.s 8634 8611 -23 -0.266%
cmd/vendor/golang.org/x/tools/go/analysis/passes/tests.s 6189 6164 -25 -0.404%
cmd/vendor/golang.org/x/tools/go/analysis/passes/structtag.s 8089 8073 -16 -0.198%
cmd/vendor/golang.org/x/tools/go/analysis/passes/unsafeptr.s 2208 2177 -31 -1.404%
cmd/vendor/golang.org/x/tools/go/analysis/passes/unreachable.s 8050 8047 -3 -0.037%
cmd/vendor/golang.org/x/tools/go/analysis/passes/unusedresult.s 3665 3629 -36 -0.982%
cmd/vendor/golang.org/x/tools/go/ast/astutil.s 65773 65680 -93 -0.141%
cmd/vendor/golang.org/x/tools/go/analysis/unitchecker.s 13328 13286 -42 -0.315%
cmd/vendor/golang.org/x/tools/go/types/typeutil.s 12263 12162 -101 -0.824%
cmd/vendor/golang.org/x/tools/go/analysis/passes/errorsas.s 1459 1421 -38 -2.605%
cmd/vendor/golang.org/x/tools/go/analysis/passes/ctrlflow.s 5208 5191 -17 -0.326%
cmd/vendor/golang.org/x/tools/go/analysis/passes/unmarshal.s 1801 1782 -19 -1.055%
cmd/vendor/golang.org/x/tools/go/analysis/passes/lostcancel.s 9569 9528 -41 -0.428%
cmd/go/internal/work.s 304928 304756 -172 -0.056%
crypto/x509.s 147340 147139 -201 -0.136%
cmd/vendor/golang.org/x/tools/go/analysis/passes/printf.s 34287 34019 -268 -0.782%
crypto/tls.s 311603 310644 -959 -0.308%
cmd/oldlink/internal/ld.s 533115 532651 -464 -0.087%
cmd/oldlink/internal/wasm.s 16484 16458 -26 -0.158%
cmd/oldlink/internal/x86.s 18832 18830 -2 -0.011%
cmd/link/internal/ld.s 548200 547626 -574 -0.105%
cmd/link/internal/wasm.s 16760 16734 -26 -0.155%
cmd/link/internal/arm64.s 20850 20840 -10 -0.048%
cmd/link/internal/x86.s 17437 17435 -2 -0.011%
net/http.s 556647 555519 -1128 -0.203%
net/http/cookiejar.s 15849 15833 -16 -0.101%
expvar.s 9521 9508 -13 -0.137%
net/http/httptest.s 16471 16452 -19 -0.115%
cmd/vendor/github.com/google/pprof/internal/plugin.s 4266 4264 -2 -0.047%
net/http/cgi.s 23448 23428 -20 -0.085%
cmd/go/internal/web.s 16472 16428 -44 -0.267%
net/http/httputil.s 39672 39670 -2 -0.005%
net/rpc.s 33989 33965 -24 -0.071%
net/http/fcgi.s 19167 19162 -5 -0.026%
cmd/vendor/github.com/google/pprof/internal/symbolz.s 5861 5857 -4 -0.068%
cmd/vendor/github.com/google/pprof/internal/binutils.s 35842 35823 -19 -0.053%
cmd/vendor/github.com/google/pprof/internal/symbolizer.s 11449 11404 -45 -0.393%
cmd/go/internal/get.s 62726 62582 -144 -0.230%
cmd/vendor/github.com/google/pprof/internal/report.s 80032 80022 -10 -0.012%
cmd/go/internal/modfetch/codehost.s 89005 88871 -134 -0.151%
cmd/trace.s 116607 116496 -111 -0.095%
cmd/vendor/github.com/google/pprof/internal/driver.s 143234 143207 -27 -0.019%
cmd/vendor/github.com/google/pprof/driver.s 9000 8998 -2 -0.022%
cmd/go/internal/modfetch.s 126300 125726 -574 -0.454%
cmd/pprof.s 12317 12312 -5 -0.041%
cmd/go/internal/modconv.s 17878 17861 -17 -0.095%
cmd/go/internal/modload.s 150261 149763 -498 -0.331%
cmd/go/internal/clean.s 11122 11091 -31 -0.279%
cmd/go/internal/help.s 6523 6521 -2 -0.031%
cmd/go/internal/generate.s 11627 11614 -13 -0.112%
cmd/go/internal/envcmd.s 22034 21986 -48 -0.218%
cmd/go/internal/modget.s 38478 38398 -80 -0.208%
cmd/go/internal/modcmd.s 46430 46229 -201 -0.433%
cmd/go/internal/test.s 64399 64374 -25 -0.039%
cmd/compile/internal/ssa.s 3615264 3608276 -6988 -0.193%
cmd/compile/internal/gc.s 1538865 1537625 -1240 -0.081%
cmd/compile/internal/amd64.s 33593 33574 -19 -0.057%
cmd/compile/internal/x86.s 30871 30852 -19 -0.062%
total 19343565 19311284 -32281 -0.167%
Change-Id: Ib030eb79458827a5a5b6d0d2f98765f8325a4d7e
Reviewed-on: https://go-review.googlesource.com/c/go/+/222923
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
|
||
Ruixin(Peter) Bao
|
b2790a2838 |
cmd/compile: allow floating point Ops to produce flags on s390x
On s390x, some floating point arithmetic instructions (FSUB, FADD) generate flag. This patch allows those related SSA ops to return a tuple, where the second argument of the tuple is the generated flag. We can use the flag and remove the subsequent comparison instruction (e.g: LTDBR). This CL also reduces the .text section for math.test binary by 0.4KB. Benchmarks: name old time/op new time/op delta Acos-18 12.1ns ± 0% 12.1ns ± 0% ~ (all equal) Acosh-18 18.5ns ± 0% 18.5ns ± 0% ~ (all equal) Asin-18 13.1ns ± 0% 13.1ns ± 0% ~ (all equal) Asinh-18 19.4ns ± 0% 19.5ns ± 1% ~ (p=0.444 n=5+5) Atan-18 10.0ns ± 0% 10.0ns ± 0% ~ (all equal) Atanh-18 19.1ns ± 1% 19.2ns ± 2% ~ (p=0.841 n=5+5) Atan2-18 16.4ns ± 0% 16.4ns ± 0% ~ (all equal) Cbrt-18 14.8ns ± 0% 14.8ns ± 0% ~ (all equal) Ceil-18 0.78ns ± 0% 0.78ns ± 0% ~ (all equal) Copysign-18 0.80ns ± 0% 0.80ns ± 0% ~ (all equal) Cos-18 7.19ns ± 0% 7.19ns ± 0% ~ (p=0.556 n=4+5) Cosh-18 12.4ns ± 0% 12.4ns ± 0% ~ (all equal) Erf-18 10.8ns ± 0% 10.8ns ± 0% ~ (all equal) Erfc-18 11.0ns ± 0% 11.0ns ± 0% ~ (all equal) Erfinv-18 23.0ns ±16% 26.8ns ± 1% +16.90% (p=0.008 n=5+5) Erfcinv-18 23.3ns ±15% 26.1ns ± 7% ~ (p=0.087 n=5+5) Exp-18 8.67ns ± 0% 8.67ns ± 0% ~ (p=1.000 n=4+4) ExpGo-18 50.8ns ± 3% 52.4ns ± 2% ~ (p=0.063 n=5+5) Expm1-18 9.49ns ± 1% 9.47ns ± 0% ~ (p=1.000 n=5+5) Exp2-18 52.7ns ± 1% 50.5ns ± 3% -4.10% (p=0.024 n=5+5) Exp2Go-18 50.6ns ± 1% 48.4ns ± 3% -4.39% (p=0.008 n=5+5) Abs-18 0.67ns ± 0% 0.67ns ± 0% ~ (p=0.444 n=5+5) Dim-18 1.02ns ± 0% 1.03ns ± 0% +0.98% (p=0.008 n=5+5) Floor-18 0.78ns ± 0% 0.78ns ± 0% ~ (all equal) Max-18 3.09ns ± 1% 3.05ns ± 0% -1.42% (p=0.008 n=5+5) Min-18 3.32ns ± 1% 3.30ns ± 0% -0.72% (p=0.016 n=5+4) Mod-18 62.3ns ± 1% 65.8ns ± 3% +5.55% (p=0.008 n=5+5) Frexp-18 5.05ns ± 2% 4.98ns ± 0% ~ (p=0.683 n=5+5) Gamma-18 24.4ns ± 0% 24.1ns ± 0% -1.23% (p=0.008 n=5+5) Hypot-18 10.3ns ± 0% 10.3ns ± 0% ~ (all equal) HypotGo-18 10.2ns ± 0% 10.2ns ± 0% ~ (all equal) Ilogb-18 3.56ns ± 1% 3.54ns ± 0% ~ (p=0.595 n=5+5) J0-18 113ns ± 0% 108ns ± 1% -4.42% (p=0.016 n=4+5) J1-18 115ns ± 0% 109ns ± 1% -4.87% (p=0.016 n=4+5) Jn-18 240ns ± 0% 230ns ± 2% -4.41% (p=0.008 n=5+5) Ldexp-18 6.19ns ± 0% 6.19ns ± 0% ~ (p=0.444 n=5+5) Lgamma-18 32.2ns ± 0% 32.2ns ± 0% ~ (all equal) Log-18 13.1ns ± 0% 13.1ns ± 0% ~ (all equal) Logb-18 4.23ns ± 0% 4.22ns ± 0% ~ (p=0.444 n=5+5) Log1p-18 12.7ns ± 0% 12.7ns ± 0% ~ (all equal) Log10-18 18.1ns ± 0% 18.2ns ± 0% ~ (p=0.167 n=5+5) Log2-18 14.0ns ± 0% 14.0ns ± 0% ~ (all equal) Modf-18 10.4ns ± 0% 10.5ns ± 0% +0.96% (p=0.016 n=4+5) Nextafter32-18 11.3ns ± 0% 11.3ns ± 0% ~ (all equal) Nextafter64-18 4.01ns ± 1% 3.97ns ± 0% ~ (p=0.333 n=5+4) PowInt-18 32.7ns ± 0% 32.7ns ± 0% ~ (all equal) PowFrac-18 33.2ns ± 0% 33.1ns ± 0% ~ (p=0.095 n=4+5) Pow10Pos-18 1.58ns ± 0% 1.58ns ± 0% ~ (all equal) Pow10Neg-18 5.81ns ± 0% 5.81ns ± 0% ~ (all equal) Round-18 0.78ns ± 0% 0.78ns ± 0% ~ (all equal) RoundToEven-18 0.78ns ± 0% 0.78ns ± 0% ~ (all equal) Remainder-18 40.6ns ± 0% 40.7ns ± 0% ~ (p=0.238 n=5+4) Signbit-18 1.57ns ± 0% 1.57ns ± 0% ~ (all equal) Sin-18 6.75ns ± 0% 6.74ns ± 0% ~ (p=0.333 n=5+4) Sincos-18 29.5ns ± 0% 29.5ns ± 0% ~ (all equal) Sinh-18 14.4ns ± 0% 14.4ns ± 0% ~ (all equal) SqrtIndirect-18 3.97ns ± 0% 4.15ns ± 0% +4.59% (p=0.008 n=5+5) SqrtLatency-18 8.01ns ± 0% 8.01ns ± 0% ~ (all equal) SqrtIndirectLatency-18 11.6ns ± 0% 11.6ns ± 0% ~ (all equal) SqrtGoLatency-18 44.7ns ± 0% 45.0ns ± 0% +0.67% (p=0.008 n=5+5) SqrtPrime-18 1.26µs ± 0% 1.27µs ± 0% +0.63% (p=0.029 n=4+4) Tan-18 11.1ns ± 0% 11.1ns ± 0% ~ (all equal) Tanh-18 15.8ns ± 0% 15.8ns ± 0% ~ (all equal) Trunc-18 0.78ns ± 0% 0.78ns ± 0% ~ (all equal) Y0-18 113ns ± 2% 108ns ± 3% -5.11% (p=0.008 n=5+5) Y1-18 112ns ± 3% 107ns ± 0% -4.29% (p=0.000 n=5+4) Yn-18 229ns ± 0% 220ns ± 1% -3.76% (p=0.016 n=4+5) Float64bits-18 1.09ns ± 0% 1.09ns ± 0% ~ (all equal) Float64frombits-18 0.55ns ± 0% 0.55ns ± 0% ~ (all equal) Float32bits-18 0.96ns ±16% 0.86ns ± 0% ~ (p=0.563 n=5+5) Float32frombits-18 1.03ns ±28% 0.84ns ± 0% ~ (p=0.167 n=5+5) FMA-18 1.60ns ± 0% 1.60ns ± 0% ~ (all equal) [Geo mean] 10.0ns 9.9ns -0.41% Change-Id: Ief7e63ea5a8ba404b0a4696e12b9b7e0b05a9a03 Reviewed-on: https://go-review.googlesource.com/c/go/+/209160 Reviewed-by: Michael Munday <mike.munday@ibm.com> Run-TryBot: Michael Munday <mike.munday@ibm.com> TryBot-Result: Gobot Gobot <gobot@golang.org> |
||
|
Austin Clements
|
da8591b61c |
all: remove darwin/arm build-tags and files
This removes all files that are only used on darwin/arm and cleans up build tags in files that are still used on other platforms. Updates #37611. Change-Id: Ic9490cf0edfc157c6276a7ca950c1768b34a998f Reviewed-on: https://go-review.googlesource.com/c/go/+/227197 Run-TryBot: Austin Clements <austin@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Cherry Zhang <cherryyz@google.com> |
||
Dan Scales
|
0a820007e7 |
runtime: static lock ranking for the runtime (enabled by GOEXPERIMENT)
I took some of the infrastructure from Austin's lock logging CR https://go-review.googlesource.com/c/go/+/192704 (with deadlock detection from the logs), and developed a setup to give static lock ranking for runtime locks. Static lock ranking establishes a documented total ordering among locks, and then reports an error if the total order is violated. This can happen if a deadlock happens (by acquiring a sequence of locks in different orders), or if just one side of a possible deadlock happens. Lock ordering deadlocks cannot happen as long as the lock ordering is followed. Along the way, I found a deadlock involving the new timer code, which Ian fixed via https://go-review.googlesource.com/c/go/+/207348, as well as two other potential deadlocks. See the constants at the top of runtime/lockrank.go to show the static lock ranking that I ended up with, along with some comments. This is great documentation of the current intended lock ordering when acquiring multiple locks in the runtime. I also added an array lockPartialOrder[] which shows and enforces the current partial ordering among locks (which is embedded within the total ordering). This is more specific about the dependencies among locks. I don't try to check the ranking within a lock class with multiple locks that can be acquired at the same time (i.e. check the ranking when multiple hchan locks are acquired). Currently, I am doing a lockInit() call to set the lock rank of most locks. Any lock that is not otherwise initialized is assumed to be a leaf lock (a very high rank lock), so that eliminates the need to do anything for a bunch of locks (including all architecture-dependent locks). For two locks, root.lock and notifyList.lock (only in the runtime/sema.go file), it is not as easy to do lock initialization, so instead, I am passing the lock rank with the lock calls. For Windows compilation, I needed to increase the StackGuard size from 896 to 928 because of the new lock-rank checking functions. Checking of the static lock ranking is enabled by setting GOEXPERIMENT=staticlockranking before doing a run. To make sure that the static lock ranking code has no overhead in memory or CPU when not enabled by GOEXPERIMENT, I changed 'go build/install' so that it defines a build tag (with the same name) whenever any experiment has been baked into the toolchain (by checking Expstring()). This allows me to avoid increasing the size of the 'mutex' type when static lock ranking is not enabled. Fixes #38029 Change-Id: I154217ff307c47051f8dae9c2a03b53081acd83a Reviewed-on: https://go-review.googlesource.com/c/go/+/207619 Reviewed-by: Dan Scales <danscales@google.com> Reviewed-by: Keith Randall <khr@golang.org> Run-TryBot: Dan Scales <danscales@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> |