The introduction of temporaries in order.c was not
quite right for two corner cases:
1) The rewrite that pushed new variables on the lhs of
a receive into the body of the case was dropping the
declaration of the variables. If the variables escape,
the declaration is what allocates them.
Caught by escape analysis sanity check.
In fact the declarations should move into the body
always, so that we only allocate if the corresponding
case is selected. Do that. (This is an optimization that
was already present in Go 1.2. The new order code just
made it stop working.)
Fixes#7997.
2) The optimization to turn a single-recv select into
an ordinary receive assumed it could take the address
of the destination; not so if the destination is _.
Fixes#7998.
LGTM=iant
R=golang-codereviews, iant
CC=golang-codereviews
https://golang.org/cl/100480043
The GC program describing a data structure sometimes trusts the
pointer base type and other times does not (if not, the garbage collector
must fall back on per-allocation type information stored in the heap).
Make the scanning of a pointer in an interface do the same.
This fixes a crash in a particular use of reflect.SliceHeader.
Fixes#8004.
LGTM=khr
R=golang-codereviews, khr
CC=0xe2.0x9a.0x9b, golang-codereviews, iant, r
https://golang.org/cl/100470045
AddressSanitizer says:
AddressSanitizer: heap-buffer-overflow on address 0x60200001b6f3
READ of size 6 at 0x60200001b6f3 thread T0
#0 0x46741b in __interceptor_memcmp asan_interceptors.cc:337
#1 0x4b5794 in compile src/cmd/6g/../gc/pgen.c:177
#2 0x509b81 in funccompile src/cmd/gc/dcl.c:1457
#3 0x520fe2 in p9main src/cmd/gc/lex.c:489
#4 0x5e2e01 in main src/lib9/main.c:57
#5 0x7fab81f7976c in __libc_start_main /build/buildd/eglibc-2.15/csu/libc-start.c:226
#6 0x4b16dc in _start (pkg/tool/linux_amd64/6g+0x4b16dc)
0x60200001b6f3 is located 0 bytes to the right of 3-byte region [0x60200001b6f0,0x60200001b6f3)
allocated by thread T0 here:
#0 0x493ec8 in __interceptor_malloc asan_malloc_linux.cc:75
#1 0x54d64e in mal src/cmd/gc/subr.c:459
#2 0x5260d5 in yylex src/cmd/gc/lex.c:1605
#3 0x52078f in p9main src/cmd/gc/lex.c:402
#4 0x5e2e01 in main src/lib9/main.c:57
If the memory block happens to be at the end of hunk and page bounadry,
this out-of-bounds can lead to a crash.
LGTM=dave, iant
R=golang-codereviews, dave, iant
CC=golang-codereviews
https://golang.org/cl/93370043
This is joint work with Daniel Morsing.
In order for the register allocator to alias two variables, they must have the same width, stack offset, and etype. Code generation was altering a variable's etype in a few places. This prevented the variable from being moved to a register, which in turn prevented peephole optimization. This failure to alias was very common, with almost 23,000 instances just running make.bash.
This phenomenon was not visible in the register allocation debug output because the variables that failed to alias had the same name. The debugging-only change to bits.c fixes this by printing the variable number with its name.
This CL fixes the source of all etype mismatches for 6g, all but one case for 8g, and depressingly few cases for 5g. (I believe that extending CL 6819083 to 5g is a prerequisite.) Fixing the remaining cases in 8g and 5g is work for the future.
The etype mismatch fixes are:
* [gc] Slicing changed the type of the base pointer into a uintptr in order to perform arithmetic on it. Instead, support addition directly on pointers.
* [*g] OSPTR was giving type uintptr to slice base pointers; undo that. This arose, for example, while compiling copy(dst, src).
* [8g] 64 bit float conversion was assigning int64 type during codegen, overwriting the existing uint64 type.
Note that some etype mismatches are appropriate, such as a struct with a single field or an array with a single element.
With these fixes, the number of registerizations that occur while running make.bash for 6g increases ~10%. Hello world binary size shrinks ~1.5%. Running all benchmarks in the standard library show performance improvements ranging from nominal to substantive (>10%); a full comparison using 6g on my laptop is available at https://gist.github.com/josharian/8f9b5beb46667c272064. The microbenchmarks must be taken with a grain of salt; see issue 7920. The few benchmarks that show real regressions are likely due to issue 7920. I manually examined the generated code for the top few regressions and none had any assembly output changes. The few benchmarks that show extraordinary improvements are likely also due to issue 7920.
Performance results from 8g appear similar to 6g.
5g shows no performance improvements. This is not surprising, given the discussion above.
Update #7316
LGTM=rsc
R=rsc, daniel.morsing, bradfitz
CC=dave, golang-codereviews
https://golang.org/cl/91850043
Before we used line 1 of the first source file.
This should be clearer.
Fixes#4388.
LGTM=iant
R=golang-codereviews, iant
CC=golang-codereviews
https://golang.org/cl/92250044
If you write:
var x = 3
then the compiler arranges for x to be initialized in the linker
with an actual 3 from the data segment, rather than putting
x in the bss and emitting init-time "x = 3" assignment code.
If you write:
var y = x
var x = 3
then the compiler is clever and treats this the same as if
the code said 'y = 3': they both end up in the data segment
with no init-time assignments.
If you write
var y = x
var x int
then the compiler was treating this the same as if the
code said 'x = 0', making both x and y zero and avoiding
any init-time assignment.
This copying optimization to avoid init-time assignment of y
is incorrect if 'var x int' doesn't mean 'x = 0' but instead means
'x is initialized in C or assembly code'. The program ends up
with 'y = 0' instead of 'y = the value specified for x in that other code'.
Disable the propagation if there is no initializer for x.
This comes up in some uses of cgo, because cgo generates
Go globals that are initialized in accompanying C files.
Fixes#7665.
LGTM=iant
R=golang-codereviews, iant
CC=golang-codereviews
https://golang.org/cl/93200044
If the ... element type contained no pointers,
then the escape analysis did not track the ... itself.
This manifested in an escaping ...byte being treated
as non-escaping.
Fixes#7934.
LGTM=iant
R=golang-codereviews, iant
CC=golang-codereviews
https://golang.org/cl/100310043
Variables declared with 'var' have no sym->def.
Fixes#7794.
LGTM=rsc
R=golang-codereviews, bradfitz, rsc
CC=golang-codereviews
https://golang.org/cl/88360043
The name linkwriteobj is misleading because it implies that
the function has something to do with the linker, which it
does not. The name is historical: the function performs an
operation that was previously performed by the linker, but no
longer is.
LGTM=rsc
R=rsc, minux.ma
CC=golang-codereviews
https://golang.org/cl/88210045
If we compile a generated file stored in a temporary
directory - let's say /tmp/12345/work/x.c - then by default
6c stores the full path and then the pcln table in the
final binary includes the full path. This makes repeated builds
(using different temporary directories) produce different
binaries, even if the inputs are the same.
In the old 'go tool pack', the P flag specified a prefix to remove
from all stored paths (if present), and cmd/go invoked
'go tool pack grcP $WORK' to remove references to the
temporary work directory.
We've changed the build to avoid pack as much as possible,
under the theory that instead of making pack convert from
.6 to .a, the tools should just write the .a directly and save a
round of I/O.
Instead of going back to invoking pack always, define a common
flag -trimpath in the assemblers, C compilers, and Go compilers,
implemented in liblink, and arrange for cmd/go to use the flag.
Then the object files being written out have the shortened paths
from the start.
While we are here, reimplement pcln support for GOROOT_FINAL.
A build in /tmp/go uses GOROOT=/tmp/go, but if GOROOT_FINAL=/usr/local/go
is set, then a source file named /tmp/go/x.go is recorded instead as
/usr/local/go/x.go. We use this so that we can prepare distributions
to be installed in /usr/local/go without actually working in that
directory. The conversion to liblink deleted all the old file name
handling code, including the GOROOT_FINAL translation.
Bring the GOROOT_FINAL translation back.
Before this CL, using GOROOT_FINAL=/goroot make.bash:
g% strings $(which go) | grep -c $TMPDIR
6
g% strings $(which go) | grep -c $GOROOT
793
g%
After this CL:
g% strings $(which go) | grep -c $TMPDIR
0
g% strings $(which go) | grep -c $GOROOT
0
g%
(The references to $TMPDIR tend to be cgo-generated source files.)
Adding the -trimpath flag to the assemblers required converting
them to the new Go-semantics flag parser. The text in go1.3.html
is copied and adjusted from go1.1.html, which is when we applied
that conversion to the compilers and linkers.
Fixes#6989.
LGTM=iant
R=r, iant
CC=golang-codereviews
https://golang.org/cl/88300045
Trying to make GODEBUG=gcdead=1 work with liveness
and in particular ambiguously live variables.
1. In the liveness computation, mark all ambiguously live
variables as live for the entire function, except the entry.
They are zeroed directly after entry, and we need them not
to be poisoned thereafter.
2. In the liveness computation, compute liveness (and deadness)
for all parameters, not just pointer-containing parameters.
Otherwise gcdead poisons untracked scalar parameters and results.
3. Fix liveness debugging print for -live=2 to use correct bitmaps.
(Was not updated for compaction during compaction CL.)
4. Correct varkill during map literal initialization.
Was killing the map itself instead of the inserted value temp.
5. Disable aggressive varkill cleanup for call arguments if
the call appears in a defer or go statement.
6. In the garbage collector, avoid bug scanning empty
strings. An empty string is two zeros. The multiword
code only looked at the first zero and then interpreted
the next two bits in the bitmap as an ordinary word bitmap.
For a string the bits are 11 00, so if a live string was zero
length with a 0 base pointer, the poisoning code treated
the length as an ordinary word with code 00, meaning it
needed poisoning, turning the string into a poison-length
string with base pointer 0. By the same logic I believe that
a live nil slice (bits 11 01 00) will have its cap poisoned.
Always scan full multiword struct.
7. In the runtime, treat both poison words (PoisonGC and
PoisonStack) as invalid pointers that warrant crashes.
Manual testing as follows:
- Create a script called gcdead on your PATH containing:
#!/bin/bash
GODEBUG=gcdead=1 GOGC=10 GOTRACEBACK=2 exec "$@"
- Now you can build a test and then run 'gcdead ./foo.test'.
- More importantly, you can run 'go test -short -exec gcdead std'
to run all the tests.
Fixes#7676.
While here, enable the precise scanning of slices, since that was
disabled due to bugs like these. That now works, both with and
without gcdead.
Fixes#7549.
LGTM=khr
R=khr
CC=golang-codereviews
https://golang.org/cl/83410044
Brad has been asking for this for a while.
I have resisted because I wanted to find a more general way to
do this, one that would keep the performance of code introducing
variables the same as the performance of code that did not.
(See golang.org/issue/3512#c20).
I have not found the more general way, and recent changes to
remove ambiguously live temporaries have blown away the
property I was trying to preserve, so that's no longer a reason
not to make the change.
Fixes#3512.
LGTM=iant
R=iant
CC=bradfitz, golang-codereviews, khr, r
https://golang.org/cl/83740044
Darwin 10.6 (gcc 4.2) and some older versions of gcc default to C90 mode, not C99 mode. Silence the warning.
LGTM=aram, iant
R=golang-codereviews, aram, iant
CC=golang-codereviews
https://golang.org/cl/83090050
Reduce footprint of liveness bitmaps by about 5x.
1. Mark all liveness bitmap symbols as 4-byte aligned
(they were aligned to a larger size by default).
2. The bitmap data is a bitmap count n followed by n bitmaps.
Each bitmap begins with its own count m giving the number
of bits. All the m's are the same for the n bitmaps.
Emit this bitmap length once instead of n times.
3. Many bitmaps within a function have the same bit values,
but each call site was given a distinct bitmap. Merge duplicate
bitmaps so that no bitmap is written more than once.
4. Many functions end up with the same aggregate bitmap data.
We used to name the bitmap data funcname.gcargs and funcname.gclocals.
Instead, name it gclocals.<md5 of data> and mark it dupok so
that the linker coalesces duplicate sets. This cut the bitmap
data remaining after step 3 by 40%; I was not expecting it to
be quite so dramatic.
Applied to "go build -ldflags -w code.google.com/p/go.tools/cmd/godoc":
bitmaps pclntab binary on disk
before this CL 1326600 1985854 12738268
4-byte align 1154288 (0.87x) 1985854 (1.00x) 12566236 (0.99x)
one bitmap len 782528 (0.54x) 1985854 (1.00x) 12193500 (0.96x)
dedup bitmap 414748 (0.31x) 1948478 (0.98x) 11787996 (0.93x)
dedup bitmap set 245580 (0.19x) 1948478 (0.98x) 11620060 (0.91x)
While here, remove various dead blocks of code from plive.c.
Fixes#6929.
Fixes#7568.
LGTM=khr
R=khr
CC=golang-codereviews
https://golang.org/cl/83630044
warning: src/cmd/8g/ggen.c:35 non-interruptable temporary
warning: src/cmd/gc/walk.c:656 set and not used: l
warning: src/cmd/gc/walk.c:658 set and not used: l
LGTM=minux.ma
R=golang-codereviews, minux.ma
CC=golang-codereviews
https://golang.org/cl/83660043
1. Use n->alloc, not n->left, to hold the allocated temp being
passed from orderstmt/orderexpr to walk.
2. Treat method values the same as closures.
3. Use killed temporary for composite literal passed to
non-escaping function argument.
4. Clean temporaries promptly in if and for statements.
5. Clean temporaries promptly in select statements.
As part of this, move all the temporary-generating logic
out of select.c into order.c, so that the temporaries can
be reclaimed.
With the new temporaries, can re-enable the 1-entry
select optimization. Fixes issue 7672.
While we're here, fix a 1-line bug in select processing
turned up by the new liveness test (but unrelated; select.c:72).
Fixes#7686.
6. Clean temporaries (but not particularly promptly) in switch
and range statements.
7. Clean temporary used during convT2E/convT2I.
8. Clean temporaries promptly during && and || expressions.
---
CL 81940043 reduced the number of ambiguously live temps
in the godoc binary from 860 to 711.
CL 83090046 reduced the number from 711 to 121.
This CL reduces the number from 121 to 23.
15 the 23 that remain are in fact ambiguously live.
The final 8 could be fixed but are not trivial and
not common enough to warrant work at this point
in the release cycle.
These numbers only count ambiguously live temps,
not ambiguously live user-declared variables.
There are 18 such variables in the godoc binary after this CL,
so a total of 41 ambiguously live temps or user-declared
variables.
The net effect is that zeroing anything on entry to a function
should now be a rare event, whereas earlier it was the
common case.
This is good enough for Go 1.3, and probably good
enough for future releases too.
Fixes#7345.
LGTM=khr
R=khr
CC=golang-codereviews
https://golang.org/cl/83000048
1. In functions with heap-allocated result variables or with
defer statements, the return sequence requires more than
just a single RET instruction. There is an optimization that
arranges for all returns to jump to a single copy of the return
epilogue in this case. Unfortunately, that optimization is
fundamentally incompatible with PC-based liveness information:
it takes PCs at many different points in the function and makes
them all land at one PC, making the combined liveness information
at that target PC a mess. Disable this optimization, so that each
return site gets its own copy of the 'call deferreturn' and the
copying of result variables back from the heap.
This removes quite a few spurious 'ambiguously live' variables.
2. Let orderexpr allocate temporaries that are passed by address
to a function call and then die on return, so that we can arrange
an appropriate VARKILL.
2a. Do this for ... slices.
2b. Do this for closure structs.
2c. Do this for runtime.concatstring, which is the implementation
of large string additions. Change representation of OADDSTR to
an explicit list in typecheck to avoid reconstructing list in both
walk and order.
3. Let orderexpr allocate the temporary variable copies used for
range loops, so that they can be killed when the loop is over.
Similarly, let it allocate the temporary holding the map iterator.
CL 81940043 reduced the number of ambiguously live temps
in the godoc binary from 860 to 711.
This CL reduces the number to 121. Still more to do, but another
good checkpoint.
Update #7345
LGTM=khr
R=khr
CC=golang-codereviews
https://golang.org/cl/83090046
The new channel and map runtime routines take pointers
to values, typically temporaries. Without help, the compiler
cannot tell when those temporaries stop being needed,
because it isn't sure what happened to the pointer.
Arrange to insert explicit VARKILL instructions for these
temporaries so that the liveness analysis can avoid seeing
them as "ambiguously live".
The change is made in order.c, which was already in charge of
introducing temporaries to preserve the order-of-evaluation
guarantees. Now its job has expanded to include introducing
temporaries as needed by runtime routines, and then also
inserting the VARKILL annotations for all these temporaries,
so that their lifetimes can be shortened.
In order to do its job for the map runtime routines, order.c arranges
that all map lookups or map assignments have the form:
x = m[k]
x, y = m[k]
m[k] = x
where x, y, and k are simple variables (often temporaries).
Likewise, receiving from a channel is now always:
x = <-c
In order to provide the map guarantee, order.c is responsible for
rewriting x op= y into x = x op y, so that m[k] += z becomes
t = m[k]
t2 = t + z
m[k] = t2
While here, fix a few bugs in order.c's traversal: it was failing to
walk into select and switch case bodies, so order of evaluation
guarantees were not preserved in those situations.
Added tests to test/reorder2.go.
Fixes#7671.
In gc/popt's temporary-merging optimization, allow merging
of temporaries with their address taken as long as the liveness
ranges do not intersect. (There is a good chance of that now
that we have VARKILL annotations to limit the liveness range.)
Explicitly killing temporaries cuts the number of ambiguously
live temporaries that must be zeroed in the godoc binary from
860 to 711, or -17%. There is more work to be done, but this
is a good checkpoint.
Update #7345
LGTM=khr
R=khr
CC=golang-codereviews
https://golang.org/cl/81940043
chanrecv now expects a pointer to the data to be filled in.
mapiterinit expects a pointer to the hash iterator to be filled in.
In both cases, the temporary being pointed at changes from
dead to alive during the call. In order to make sure it is
preserved if a garbage collection happens after that transition
but before the call returns, the temp must be marked as live
during the entire call.
But if it is live during the entire call, it needs to be safe for
the garbage collector to scan at the beginning of the call,
before the new data has been filled in. Therefore, it must be
zeroed by the caller, before the call. Do that.
My previous attempt waited to mark it live until after the
call returned, but that's unsafe (see first paragraph);
undo that change in plive.c.
This makes powser2 pass again reliably.
I looked at every call to temp in the compiler.
The vast majority are followed immediately by an
initialization of temp, so those are fine.
The only ones that needed changing were the ones
where the next operation is to pass the address of
the temp to a function call, and there aren't too many.
Maps are exempted from this because mapaccess
returns a pointer to the data and lets the caller make
the copy.
Fixes many builds.
TBR=khr
CC=golang-codereviews
https://golang.org/cl/80700046
1. On entry to a function, only zero the ambiguously live stack variables.
Before, we were zeroing all stack variables containing pointers.
The zeroing is pretty inefficient right now (issue 7624), but there are also
too many stack variables detected as ambiguously live (issue 7345),
and that must be addressed before deciding how to improve the zeroing code.
(Changes in 5g/ggen.c, 6g/ggen.c, 8g/ggen.c, gc/pgen.c)
Fixes#7647.
2. Make the regopt word-based liveness analysis preserve the
whole-variable liveness property expected by the garbage collection
bitmap liveness analysis. That is, if the regopt liveness decides that
one word in a struct needs to be preserved, make sure it preserves
the entire struct. This is particularly important for multiword values
such as strings, slices, and interfaces, in which all the words need
to be present in order to understand the meaning.
(Changes in 5g/reg.c, 6g/reg.c, 8g/reg.c.)
Fixes#7591.
3. Make the regopt word-based liveness analysis treat a variable
as having its address taken - which makes it preserved across
all future calls - whenever n->addrtaken is set, for consistency
with the gc bitmap liveness analysis, even if there is no machine
instruction actually taking the address. In this case n->addrtaken
is incorrect (a nicer way to put it is overconservative), and ideally
there would be no such cases, but they can happen and the two
analyses need to agree.
(Changes in 5g/reg.c, 6g/reg.c, 8g/reg.c; test in bug484.go.)
Fixes crashes found by turning off "zero everything" in step 1.
4. Remove spurious VARDEF annotations. As the comment in
gc/pgen.c explains, the VARDEF must immediately precede
the initialization. It cannot be too early, and it cannot be too late.
In particular, if a function call sits between the VARDEF and the
actual machine instructions doing the initialization, the variable
will be treated as live during that function call even though it is
uninitialized, leading to problems.
(Changes in gc/gen.c; test in live.go.)
Fixes crashes found by turning off "zero everything" in step 1.
5. Do not treat loading the address of a wide value as a signal
that the value must be initialized. Instead depend on the existence
of a VARDEF or the first actual read/write of a word in the value.
If the load is in order to pass the address to a function that does
the actual initialization, treating the load as an implicit VARDEF
causes the same problems as described in step 4.
The alternative is to arrange to zero every such value before
passing it to the real initialization function, but this is a much
easier and more efficient change.
(Changes in gc/plive.c.)
Fixes crashes found by turning off "zero everything" in step 1.
6. Treat wide input parameters with their address taken as
initialized on entry to the function. Otherwise they look
"ambiguously live" and we will try to emit code to zero them.
(Changes in gc/plive.c.)
Fixes crashes found by turning off "zero everything" in step 1.
7. An array of length 0 has no pointers, even if the element type does.
Without this change, the zeroing code complains when asked to
clear a 0-length array.
(Changes in gc/reflect.c.)
LGTM=khr
R=khr
CC=golang-codereviews
https://golang.org/cl/80160044
Change two-bit stack map entries to encode:
0 = dead
1 = scalar
2 = pointer
3 = multiword
If multiword, the two-bit entry for the following word encodes:
0 = string
1 = slice
2 = iface
3 = eface
That way, during stack scanning we can check if a string
is zero length or a slice has zero capacity. We can avoid
following the contained pointer in those cases. It is safe
to do so because it can never be dereferenced, and it is
desirable to do so because it may cause false retention
of the following block in memory.
Slice feature turned off until issue 7564 is fixed.
Update #7549
LGTM=rsc
R=golang-codereviews, bradfitz, rsc
CC=golang-codereviews
https://golang.org/cl/76380043
A too large float constant is an error.
A too small float constant is rounded to zero.
Fixes#7419
Update #6902
LGTM=iant
R=golang-codereviews, iant
CC=golang-codereviews
https://golang.org/cl/76730046
The lowering to runtime calls introduces hidden pointers to the
arguments of select clauses. When implicit conversions were
involved it could end up with incompatible pointers. Since the
pointed-to types have the same representation, we can introduce a
forced conversion.
Fixes#6847.
LGTM=rsc
R=rsc, iant, khr
CC=golang-codereviews
https://golang.org/cl/72380043
The compilers expect to not be interrupted by floating
point exceptions. On Plan 9, every process starts with
interrupts enabled for invalid operation, stack overflow,
and divide by zero exceptions.
LGTM=rsc
R=rsc, 0intro
CC=golang-codereviews
https://golang.org/cl/72750043
debuglive >= 1 is not the condition under which we
start recording messages (we avoid printing for
init functions even if debuglive is set).
LGTM=bradfitz, iant
R=golang-codereviews, bradfitz
CC=golang-codereviews, iant, khr
https://golang.org/cl/74390043
This fixes the following amd64p32 issue:
pkg/time/format.go:724: internal compiler error: twobitwalktype1: invalid initial alignment, Time
caused by the pointer zone ending on a 32-bit-aligned boundary.
LGTM=rsc
R=rsc, dave
CC=golang-codereviews
https://golang.org/cl/72270046
