Slightly rephrased sentence to emphasize the contents of the
Unicode categories w/o repeating the full category name each
time.
Fixes#13414.
Change-Id: Icd32ff1547fa81e866c5937a631c3344bb6087c6
Reviewed-on: https://go-review.googlesource.com/18265
Reviewed-by: Rob Pike <r@golang.org>
In debugging the flaky test in #13825, I discovered that my previous
change to tighten and simplify the communication protocol between
Transport.roundTrip and persistConn.readLoop in
https://golang.org/cl/17890 wasn't complete.
This change simplifies it further: the buffered-vs-unbuffered
complexity goes away, and we no longer need to re-try channel reads in
the select case. It was trying to prioritize channels in the case that
two were readable in the select. (it was only failing in the race builder
because the race builds randomize select scheduling)
The problem was that in the bodyless response case we had to return
the idle connection before replying to roundTrip. But putIdleConn
previously both added it to the free list (which we wanted), but also
closed the connection, which made the caller goroutine
(Transport.roundTrip) have two readable cases: pc.closech, and the
response. We guarded against similar conditions in the caller's select
for two readable channels, but such a fix wasn't possible here, and would
be overly complicated.
Instead, switch to unbuffered channels. The unbuffered channels were only
to prevent goroutine leaks, so address that differently: add a "callerGone"
channel closed by the caller on exit, and select on that during any unbuffered
sends.
As part of the fix, split putIdleConn into two halves: a part that
just returns to the freelist, and a part that also closes. Update the
four callers to the variants each wanted.
Incidentally, the connections were closing on return to the pool due
to MaxIdleConnsPerHost (somewhat related: #13801), but this bug
could've manifested for plenty of other reasons.
Fixes#13825
Change-Id: I6fa7136e2c52909d57a22ea4b74d0155fdf0e6fa
Reviewed-on: https://go-review.googlesource.com/18282
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
This test triggers a large number of usleep(100)s. linux/arm, openbsd,
and solaris have very poor timer resolution on the builders, so
usleep(100) actually gives up the whole scheduling quantum. On Linux
and OpenBSD (and probably Solaris), profiling signals are only
generated when a process completes a whole scheduling quantum, so this
test often gets zero profiling signals and fails.
Until we figure out what to do about this, skip this test on these
platforms.
Updates #13405.
Change-Id: Ica94e4a8ae7a8df3e5a840504f83ee2ec08727df
Reviewed-on: https://go-review.googlesource.com/18252
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Previously, when a program died because of a SIGHUP, SIGINT, or SIGTERM
signal it would exit with status 2. This CL fixes the runtime to exit
with a status indicating that the program was killed by a signal.
Change-Id: Ic2982a2562857edfdccaf68856e0e4df532af136
Reviewed-on: https://go-review.googlesource.com/18156
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Use the current ability to say that we don't do anything with SIGCONT by
default, but programs can catch it using signal.Notify if they want.
Fixes#8953.
Change-Id: I67d40ce36a029cbc58a235cbe957335f4a58e1c5
Reviewed-on: https://go-review.googlesource.com/18185
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Added a format option to inhibit output of .Note field in
printing, and enabled that option during export.
Added test.
Fixes#13777.
Change-Id: I739f9785eb040f2fecbeb96d5a9ceb8c1ca0f772
Reviewed-on: https://go-review.googlesource.com/18217
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
When 'go tool dist test' stops, it was intended that it first wait for
pending background tests, like a failed compilation waits for pending
background compiles. But these three lines prevented that.
Fix by deleting them. (The actual loop already contains the correct
logic to avoid running the others and to wait for what's left.)
Change-Id: I4e945495ada903fb0af567910626241bc1c52ba6
Reviewed-on: https://go-review.googlesource.com/18232
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The CloseNotifier implementation and documentation was
substantially changed in https://golang.org/cl/17750 but it was a bit
too aggressive.
Issue #13666 highlighted that in addition to breaking external
projects, even the standard library (httputil.ReverseProxy) didn't
obey the new rules about not using CloseNotifier until the
Request.Body is fully consumed.
So, instead of fixing httputil.ReverseProxy, dial back the rules a
bit. It's now okay to call CloseNotify before consuming the request
body. The docs now say CloseNotifier may wait to fire before the
request body is fully consumed, but doesn't say that the behavior is
undefined anymore. Instead, we just wait until the request body is
consumed and start watching for EOF from the client then.
This CL also adds a test to ReverseProxy (using a POST request) that
would've caught this earlier.
Fixes#13666
Change-Id: Ib4e8c29c4bfbe7511f591cf9ffcda23a0f0b1269
Reviewed-on: https://go-review.googlesource.com/18144
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Old behavior: 10 consecutive EPIPE errors on any descriptor cause the
program to exit with a SIGPIPE signal.
New behavior: an EPIPE error on file descriptors 1 or 2 cause the
program to raise a SIGPIPE signal. If os/signal.Notify was not used to
catch SIGPIPE signals, this will cause the program to exit with SIGPIPE.
An EPIPE error on a file descriptor other than 1 or 2 will simply be
returned from Write.
Fixes#11845.
Update #9896.
Change-Id: Ic85d77e386a8bb0255dc4be1e4b3f55875d10f18
Reviewed-on: https://go-review.googlesource.com/18151
Reviewed-by: Russ Cox <rsc@golang.org>
This CL changes the source file information in the
standard library's .a files to say "$GOROOT/src/runtime/chan.go"
(with a literal "$GOROOT") instead of spelling out the actual directory.
The linker then substitutes the actual $GOROOT (or $GOROOT_FINAL)
as appropriate.
If people download a binary distribution to an alternate location,
following the instructions at https://golang.org/doc/install#install,
the code before this CL would end up with source paths pointing to
/usr/local/go no matter where the actual sources were.
Now the source paths for built binaries will point to the actual sources
(hopefully).
The source line information in distributed binaries is not affected:
those will still say /usr/local/go. But binaries people build themselves
(their own programs, not the go distribution programs) will be correct.
Fixing this path also fixes the lookup of the runtime-gdb.py file.
Fixes#5533.
Change-Id: I03729baae3fbd8cd636e016275ee5ad2606e4663
Reviewed-on: https://go-review.googlesource.com/18200
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Following the parallelization of some tests, a race condition can
occur in testcarchive, testshared and testcshared.
In some cases, it can result in the go env GOROOT command returning
corrupted data, which are then passed to a rm command.
Make the shell script more robust by not trusting the result of
the go env GOROOT command. It does not really fix the issue, but
at least prevent the entire repository to be deleted.
Updates #13789
Change-Id: Iaf04a7bd078ed3a82e724e35c4b86e6f756f2a2f
Reviewed-on: https://go-review.googlesource.com/18173
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
https://golang.org/cl/18087 added a bunch of t.Parallel calls, which
aren't compatible with the afterTest func. But in short mode, afterTest
is a no-op. To keep all.bash (short mode) fast, conditionally set
t.Parallel when in short mode, but keep it unset for compatibility with
afterFunc otherwise.
Fixes#13804
Change-Id: Ie841fbc2544e1ffbee43ba1afbe895774e290da0
Reviewed-on: https://go-review.googlesource.com/18143
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Open(`C:`) currently opens root directory on C:. Change that to open
current directory on C:. Just like cmd.exe's "dir C:" command does.
Just like FindFirstFile("C:*") Windows API does. It is also consistent
with what filepath.Join("C:", "a") currently does.
Fixes#13763
Change-Id: I60b6e7d80215d110bbbb6265c9f32717401638c6
Reviewed-on: https://go-review.googlesource.com/18184
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
Now there are just three programs to compile instead of many,
and repeated tests can reuse the compilation result instead of
rebuilding it.
Combined, these changes reduce the time spent testing runtime
during all.bash on my laptop from about 60 to about 30 seconds.
(All.bash itself runs in 5½ minutes.)
For #10571.
Change-Id: Ie2c1798b847f1a635a860d11dcdab14375319ae9
Reviewed-on: https://go-review.googlesource.com/18085
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
I broke the rule: never click the Submit button on the web.
Change-Id: If81a5cc31c1f28664960bad124cc596f5cab1222
Reviewed-on: https://go-review.googlesource.com/18203
Reviewed-by: Russ Cox <rsc@golang.org>
These find approximately nothing.
Takes 5% off my all.bash run time.
For #10571.
Change-Id: I21d3a844af756eb37f59bba0064f24995626da0d
Reviewed-on: https://go-review.googlesource.com/18198
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Takes 15% off my all.bash run time
(after this and earlier CLs, now down to 3½ from 5½ minutes).
For #10571.
Change-Id: Iac316ffb730c9ff0a0faa7cc3b82ed4f7e6d4361
Reviewed-on: https://go-review.googlesource.com/18088
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Mostly we just care that the test binaries link and start up.
No need to run the full test suites.
Takes 12% off my all.bash run time.
For #10571.
Change-Id: I01af618f3d51deb841ea638424e1389a2df7d746
Reviewed-on: https://go-review.googlesource.com/18086
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Takes 3% off my all.bash run time.
For #10571.
Change-Id: I8f00f523d6919e87182d35722a669b0b96b8218b
Reviewed-on: https://go-review.googlesource.com/18087
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I'm tired of having to remember it on every command.
Rebuilding everything is the wrong default.
This CL updates the build script, but the builders may
(or may not) need work, depending on whether they
rebuild using the test command (I doubt it).
Change-Id: I21f202a2f13e73df3f6bd54ae6a317c467b68151
Reviewed-on: https://go-review.googlesource.com/18084
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently goroutineheader goes through some convolutions to *almost*
print the scan state of a G. However, the code path that would print
the scan state of the G refers to gStatusStrings where it almost
certainly meant to refer to gScanStatusStrings (which is unused), so
it winds up printing the regular status string without the scan state
either way. Furthermore, if the G is in _Gwaiting, we override the
status string and lose where this would indicate the scan state if it
worked.
This commit fixes this so the runtime prints the scan state. However,
rather than using a parallel list of status strings, this simply adds
a conditional print if the scan bit is set. This lets us remove the
string list, prints the scan state even in _Gwaiting, and lets us
strip off the scan bit at the beginning of the function, which
simplifies the rest of it.
Change-Id: Ic0adbe5c05abf4adda93da59f93b578172b28e3d
Reviewed-on: https://go-review.googlesource.com/18092
Reviewed-by: Keith Randall <khr@golang.org>
If non-Go code calls sigaltstack before a signal is received, use
sigaltstack to determine the current signal stack and set the gsignal
stack to use it. This makes the Go runtime more robust in the face of
non-Go code. We still can't handle a disabled signal stack or a signal
triggered with SA_ONSTACK clear, but we now give clear errors for those
cases.
Fixes#7227.
Update #9896.
Change-Id: Icb1607e01fd6461019b6d77d940e59b3aed4d258
Reviewed-on: https://go-review.googlesource.com/18102
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
This makes NYCbCrA consistent with YCbCr.
Fixes#13706.
Change-Id: Ifced84372e4865925fa6efef9ca2f1de43da70e0
Reviewed-on: https://go-review.googlesource.com/18115
Reviewed-by: Rob Pike <r@golang.org>
s/encrypt/decrypt/
The text is unsafe to cut and paste...
Change-Id: Iab19ddf8182d087e9a4b4d34a9eeabd1d2aa02d6
Reviewed-on: https://go-review.googlesource.com/18104
Reviewed-by: Rob Pike <r@golang.org>
Give a link to the wikipedia page describing the mechanism and
explain better how to use the same buffer for input and output.
Change-Id: If6dfd6cf9c6dff0517cb715f60a11349dbdd91e0
Reviewed-on: https://go-review.googlesource.com/18103
Reviewed-by: Russ Cox <rsc@golang.org>
This change replaces the existing log format separated by commas and
spaces with space-separated one.
Change-Id: I9a4b38669025430190c9a1a6b5c82b862866559d
Reviewed-on: https://go-review.googlesource.com/17999
Reviewed-by: Ian Lance Taylor <iant@golang.org>
