If both inputs are constant offsets from the same pointer then we
can evaluate NeqPtr and EqPtr at compile time. Triggers a few times
during all.bash. Removes a conditional branch in the following
code:
copy(x[1:], x[:])
This branch was recently added as an optimization in CL 94596. We
now skip the memmove if the pointers are equal. However, in the
above code we know at compile time that they are never equal.
Also, when the offset is variable, check if the offset is zero
rather than if the pointers are equal. For example:
copy(x[a:], x[:])
This would now skip the copy if a == 0, rather than if x + a == x.
Finally I've also added a rule to make IsNonNil true for pointers
to values on the stack. The nil check elimination pass will catch
these anyway, but eliminating them here might eliminate branches
earlier.
Change-Id: If72f436fef0a96ad0f4e296d3a1f8b6c3e712085
Reviewed-on: https://go-review.googlesource.com/106635
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL makes the codegen testsuite automatically test all
architecture variants for architecture specified in tests. For
instance, if a test file specifies a "arm" test, it will be
automatically run on all GOARM variants (5,6,7), to increase
the coverage.
The CL also introduces a syntax to specify only a specific
variant (eg: "arm/7") in case the test makes sense only there.
The same syntax also allows to specify the operating system
in case it matters (eg: "plan9/386/sse2").
Fixes#24658
Change-Id: I2eba8b918f51bb6a77a8431a309f8b71af07ea22
Reviewed-on: https://go-review.googlesource.com/107315
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
And remove it from asmtest. Next CL will remove the whole
asmtest infrastructure.
Change-Id: I5851bf7c617456d62a3c6cffacf70252df7b056b
Reviewed-on: https://go-review.googlesource.com/107335
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
And delete them from asm_test.
Also delete an arm64 cmov test has been already ported to the new test
harness.
Change-Id: I4458721e1f512bc9ecbbe1c22a2c9c7109ad68fe
Reviewed-on: https://go-review.googlesource.com/106335
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
And delete them from asm_test.
Change-Id: I24f421b87e8cb4770c887a6dfd58eacd0088947d
Reviewed-on: https://go-review.googlesource.com/106056
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I9a75efe9858ef9d7ac86065f860c2ae3f25b0941
Reviewed-on: https://go-review.googlesource.com/105597
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Multi-byte comparison operations were used on amd64, arm64, i386
and s390x for comparisons with constant arrays, but only amd64 and
i386 for comparisons with string constants. This CL combines the
check for platform capability, since they have the same requirements,
and also enables both on ppc64le which also supports load merging.
Note that these optimizations currently use little endian byte order
which results in byte reversal instructions on s390x. This should
be fixed at some point.
Change-Id: Ie612d13359b50c77f4d7c6e73fea4a59fa11f322
Reviewed-on: https://go-review.googlesource.com/102558
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I0e33d58274951ab5acb67b0117b60ef617ea887a
Reviewed-on: https://go-review.googlesource.com/105735
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
And delete them from asm_test.
Change-Id: Id533130470da9176a401cb94972f626f43a62148
Reviewed-on: https://go-review.googlesource.com/103656
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
And delete them from asm_test.
Change-Id: Idfe1249052d82d15b9c30b292c78656a0bf7b48d
Reviewed-on: https://go-review.googlesource.com/103315
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I34fcf85ae8ce09cd146fe4ce6a0ae7616bd97e2d
Reviewed-on: https://go-review.googlesource.com/102296
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
And remove them from asm_test.
Change-Id: I1ca29b40546d6de06f20bfd550ed8ff87f495454
Reviewed-on: https://go-review.googlesource.com/102115
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I64c512bfef3b3da6db5c5d29277675dade28b8ab
Reviewed-on: https://go-review.googlesource.com/101595
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
And delete them from asm_test.
Change-Id: I3cf0934706a640136cb0f646509174f8c1bf3363
Reviewed-on: https://go-review.googlesource.com/101395
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
And delete them from asm_test.
Change-Id: Ibdaca3496eefc73c731b511ddb9636a1f3dff68c
Reviewed-on: https://go-review.googlesource.com/100915
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I29c8d098a8893e6b669b6272a2f508985ac9d618
Reviewed-on: https://go-review.googlesource.com/100876
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This reverts commit 080187f4f7.
It broke build of golang.org/x/exp/shiny/iconvg
See issue 24395 for details
Change-Id: Ifd6134f6214e6cee40bd3c63c32941d5fc96ae8b
Reviewed-on: https://go-review.googlesource.com/100755
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This change ports all the remaining tests checking that small memmoves
are replaced with MOVs to the new codegen test harness, and deletes
them from the asm_test file.
Change-Id: I01c94b441e27a5d61518035af62d62779dafeb56
Reviewed-on: https://go-review.googlesource.com/100476
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
cmd/asm now supports three-operand form of IMUL,
so instead of using IMUL with resultInArg0, emit IMUL3 instruction.
This results in less redundant MOVs where SSA assigns
different registers to input[0] and dst arguments.
Note: these have exactly the same encoding when reg0=reg1:
IMUL3x $const, reg0, reg1
IMULx $const, reg
Two-operand IMULx is like a crippled IMUL3x, with dst fixed to input[0].
This is why we don't bother to generate IMULx for the case where
dst is the same as input[0].
Change-Id: I4becda475b3dffdd07b6fdf1c75bacc82af654e4
Reviewed-on: https://go-review.googlesource.com/99656
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Keith Randall <khr@golang.org>
Remove old tests from asm_test.
Change-Id: Ib408ec7faa60068bddecf709b93ce308e0ef665a
Reviewed-on: https://go-review.googlesource.com/100075
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
This change adds a README file inside the test/codegen directory,
explaining how to run the codegen tests and the syntax of the regexps
comments used to match assembly instructions.
Change-Id: Ica4eb3ffa9c6975371538cc8ae0ac3c1a3a03baf
Reviewed-on: https://go-review.googlesource.com/99156
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_go.
Change-Id: I0057cbd90ca55fa51c596e32406e190f3866f93e
Reviewed-on: https://go-review.googlesource.com/99815
Reviewed-by: Keith Randall <khr@golang.org>
Only RotateLeft{64,32} were tested, and just for ppc64. This CL adds
tests for RotateLeft{64,32,16,8} on arm64 and amd64/386, for the cases
where the calls are actually instrinsified.
RotateLeft tests (the last ones for math/bits functions) are deleted
from asm_test.
This CL also adds a space between the "//" and the arch name in the
comments, to uniform this file to the style used in all the other
files.
Change-Id: Ifc2a27261d70bcc294b4ec64490d8367f62d2b89
Reviewed-on: https://go-review.googlesource.com/99596
Reviewed-by: Giovanni Bajo <rasky@develer.com>
And delete them from the asm_test.go file.
Change-Id: I124c8c352299646ec7db0968cdb0fe59a3b5d83d
Reviewed-on: https://go-review.googlesource.com/99475
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
This recently added arm64 memmove codegen check:
func movesmall() {
// arm64:-"memmove"
x := [...]byte{1, 2, 3, 4, 5, 6, 7}
copy(x[1:], x[:])
}
is not correct, for two reasons:
1. regexps are matched from the start of the disasm line (excluding
line information). This mean that a negative -"memmove" check will
pass against a 'CALL runtime.memmove' line because the line does
not start with 'memmove' (its starts with CALL...).
The way to specify no 'memmove' match whatsoever on the line is
-".*memmove"
2. AFAIK comments on their own line are matched against the first
subsequent non-comment line. So the code above only verifies that
the x := ... line does not generate a memmove. The comment should
be moved near the copy() line, if it's that one we want to not
generate a memmove call.
The fact that the test above is not effective can be checked by
running `go run run.go -v codegen` in the toplevel test directory with
a go1.10 toolchain (that does not have the memmove-elision
optimization). The test will still pass (it shouldn't).
This change changes the regexp to -".*memmove" and moves it near the
line it needs to (not)match.
Change-Id: Ie01ef4d775e77d92dc8d8b7856b89b200f5e5ef2
Reviewed-on: https://go-review.googlesource.com/98977
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
And remove them from ssa_test.
Change-Id: If767af662801219774d1bdb787c77edfa6067770
Reviewed-on: https://go-review.googlesource.com/98976
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Current implementation doesn't consider MOVDreg type operand and fail to combine
it into larger store. This patch fixes the issue.
Fixes#24242
Change-Id: I7d68697f80e76f48c3528ece01a602bf513248ec
Reviewed-on: https://go-review.googlesource.com/98397
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
And remove them from ssa_test.
Change-Id: I3efac5fea529bb0efa2dae32124530482ba5058e
Reviewed-on: https://go-review.googlesource.com/98815
Reviewed-by: Keith Randall <khr@golang.org>
And remove them from ssa_test.
Change-Id: Ib5de5c0d908f23915e0847eca338cacf2fa5325b
Reviewed-on: https://go-review.googlesource.com/98795
Reviewed-by: Giovanni Bajo <rasky@develer.com>
This change move bits.Len* intrinsification tests to the new codegen
test harness, removing them from the old ssa_test file. Five different
test functions (one for each bit.Len function tested) was used, to
avoid possible unwanted interactions between multiple calls inside one
function.
Change-Id: Iffd5be55b58e88597fa30a562a28dacb01236d8b
Reviewed-on: https://go-review.googlesource.com/98156
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
This CL moves the load/store combining tests into asmcheck.
In addition at being more compact, it's also now easier to
spot what it is missing in each architecture.
While doing so, I think I uncovered a bug in ppc64le and arm64
rules, because they fail to load/store combine in non-trivial
functions. Not sure why, I'll open an issue.
Change-Id: Ia1572d53c0553d9104f3e52b95e4d1768a8440a3
Reviewed-on: https://go-review.googlesource.com/98441
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
asmcheck comments now support a compact form of specifying
multiple checks for each platform, using the following syntax:
amd64:"SHL\t[$]4","SHR\t[$]4"
Negative checks are also parsed using the following syntax:
amd64:-"ROR"
though they are still not working.
Moreover, out-of-line comments have been implemented. This
allows to specify asmchecks on comment-only lines, that will
be matched on the first subsequent non-comment non-empty line.
// amd64:"XOR"
// arm:"EOR"
x ^= 1
Change-Id: I110c7462fc6a5c70fd4af0d42f516016ae7f2760
Reviewed-on: https://go-review.googlesource.com/97816
Reviewed-by: Keith Randall <khr@golang.org>
The top-level test harness is modified to support a new kind
of test: "asmcheck". This is meant to replace asm_test.go
as an easier and more readable way to test code generation.
I've added a couple of codegen tests to get initial feedback
on the syntax. I've created them under a common "codegen"
subdirectory, so that it's easier to run them all with
"go run run.go -v codegen".
The asmcheck syntax allows to insert line comments that
can specify a regular expression to match in the assembly code,
for multiple architectures (the testsuite will automatically
build each testfile multiple times, one per mentioned architecture).
Negative matches are unsupported for now, so this cannot fully
replace asm_test yet.
Change-Id: Ifdbba389f01d55e63e73c99e5f5449e642101d55
Reviewed-on: https://go-review.googlesource.com/97355
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
