Currently, the entry-point to this test is a Bash script that smoke
tests the FORTRAN compiler and then runs a FORTRAN-containing Go test.
This CL rearranges things so a pure Go Go test smoke tests the FORTRAN
compiler and then runs a non-test FORTRAN-containing Go binary.
While we're here, we fix a discrepancy when the host is GOARCH=amd64,
but the target is GOARCH=386. Previously, we would pick the wrong
libgfortran path because we didn't account for the cross-compilation,
causing the link to fail. Except for some reason this was ignored and
the test nevertheless "passed". In the new test we're a little more
strict, so this build failure will cause the test to fail, so we add a
little logic to account for cross-compilation with the host toolchain.
For #37486.
Change-Id: Ie6f70066885d6fbb4e1b5a2b1e13b85dee5b359b
Reviewed-on: https://go-review.googlesource.com/c/go/+/443069
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Austin Clements <austin@google.com>
This migrates testsigfwd, which uses some one-off build
infrastructure, to be part of the runtime's testprogcgo.
The test is largely unchanged. Because it's part of a larger binary,
this CL renames a few things and gates the constructor-time signal
handler registration on an environment variable. This CL also replaces
an errant fmt.Errorf with fmt.Fprintf.
For #37486, since it eliminates a non-go-test from dist.
Change-Id: I0efd146ea0a0a3f0b361431349a419af0f0ecc61
Reviewed-on: https://go-review.googlesource.com/c/go/+/443068
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This code was introduced in CL 17903 but has never executed. It's also
fundamentally non-deterministic. Delete it.
Simplification for #37486.
Change-Id: I049564123fb4fba401154e2ea0fc429e552d4749
Reviewed-on: https://go-review.googlesource.com/c/go/+/431258
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
The testasan test was added back in 2013 (CL 10126044), many years
before Go added ASAN support in 2021 (CL 298611). So, in fact,
testasan does not test Go ASAN support at all, as you might expect
(misc/cgo/testsanitizers does that). It's intended to test whether the
Go memory allocator works in a mixed C/Go binary where the C code is
compiled with ASAN. The test doesn't actually use ASAN in any way; it
just simulates where ASAN of 2013 put its shadow mappings. This made
sense to test at the time because Go was picky about where its heap
landed and ASAN happened to put its mappings exactly where Go wanted
to put its heap. These days, Go is totally flexible about its heap
placement, and I wouldn't be surprised if ASAN also works differently.
Given all of this, this test adds almost no value today. Drop it.
For #37486, since it eliminates a non-go-test from dist.
Change-Id: I0292f8efbdc0e1e39650715604535c445fbaa87f
Reviewed-on: https://go-review.googlesource.com/c/go/+/443067
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Austin Clements <austin@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Adjust os/arch checks to enable msan tests on freebsd/amd64.
R=go1.20
For #53298
Change-Id: I3d0f5259db73d526d006a12de5ba6284528cf819
Reviewed-on: https://go-review.googlesource.com/c/go/+/411276
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
The linker's -X flag allows setting/changing a string variable's
content at link time. Currently it resets its size then write a
new string header pointing to the new content. This mostly works.
But under ASAN build the string variable can have larger size
than the usual 2 words, due to the red zone. Resetting the size
can cause the variable to "overlap" (in ASAN's view) with other
variables. Don't reset the size.
Fixes#56175.
Change-Id: Ib364208201a7a2fd7f44f9b1797834198736a405
Reviewed-on: https://go-review.googlesource.com/c/go/+/442635
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
While we're here, replace a couple uses of os.Environ with cmd.Environ.
For #51317.
Change-Id: Ic5cf4a887a7975a8281223eec0f94df230b6f095
Reviewed-on: https://go-review.googlesource.com/c/go/+/431955
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
For #45557
Change-Id: I25be5b437fa1c9b0e0c46802a9b37efc2d47bca0
Reviewed-on: https://go-review.googlesource.com/c/go/+/431097
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Since os.SEEK_SET was deprecated, use io.SeekStart instead.
Change-Id: I11ae496b071ab35412403ff73e52f3da73d5b120
Reviewed-on: https://go-review.googlesource.com/c/go/+/431096
Run-TryBot: Ian Lance Taylor <iant@google.com>
Run-TryBot: hopehook <hopehook@golangcn.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Some tests in misc/cgo/testsanitizers had been disabled on ppc64le
until recently, due to an intermittent error in the tsan tests,
with the goal of trying to understand the failure.
After further investigation, I found that the code for tsan within
gcc does not work consistently when ASLR is enabled on ppc64le. A
fix for that problem was integrated in gcc 9.
This adds a check to testsanitizers to determine the gcc compiler
version on ppc64le and skip the test if the version is too old.
A similar check is needed for asan too.
Updates #54645
Change-Id: I70717d1aa9e967cf1e871566e72b3862b91fea3f
Reviewed-on: https://go-review.googlesource.com/c/go/+/425355
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Archana Ravindar <aravind5@in.ibm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
We don't have a good musl detection mechanism, so we detect Alpine (the
most common user of musl) instead.
For #39857.
For #19938.
Change-Id: I2fa39248682aed75884476374fe2212be4427347
Reviewed-on: https://go-review.googlesource.com/c/go/+/425001
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Occasionally the signal will be sent to a Go thread, which will cause
the program to exit with SIGQUIT rather than SIGSEGV.
Add TestSignalForwardingGo to test the case where the signal is
expected to be delivered to a Go thread.
This is a roll forward of CL 419014 which was rolled back in CL 424954.
This CL differs from 419014 in that it skips TestSignalForwardingGo
on darwin-amd64.
Fixes#53907
Change-Id: I5df3fd610c068df3bd48d9b3d7a9379248b97999
Reviewed-on: https://go-review.googlesource.com/c/go/+/425002
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Occasionally the signal will be sent to a Go thread, which will cause
the program to exit with SIGQUIT rather than SIGSEGV.
Add TestSignalForwardingGo to test the case where the signal is
expected to be delivered to a Go thread.
Fixes#53907
Change-Id: Iaefb964c2be4a815c11c507fa89648f8a7740ba9
Reviewed-on: https://go-review.googlesource.com/c/go/+/419014
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
The current implementation of compilerVersion incorrectly gives an
error message that the compiler version is too old even though the
system has a recent compiler. This happens for specifically for the
gcc compiler and causes ASAN tests to be skipped.
Replacing -v with gcc dump version options seems to fix it. Running
./testsanitizers.test -test.v now shows the ASAN tests being run.
--- PASS: TestASAN (16.81s)
--- PASS: TestASAN/asan_useAfterReturn (0.60s)
--- PASS: TestASAN/asan_global5 (0.61s)
--- PASS: TestASAN/asan_unsafe_fail1 (0.73s)
--- PASS: TestASAN/asan_unsafe_fail3 (0.73s)
--- PASS: TestASAN/asan_unsafe_fail2 (0.74s)
--- PASS: TestASAN/asan_global4_fail (0.74s)
--- PASS: TestASAN/asan5_fail (0.74s)
--- PASS: TestASAN/asan3_fail (0.88s)
--- PASS: TestASAN/asan4_fail (0.89s)
--- PASS: TestASAN/asan2_fail (0.99s)
--- PASS: TestASAN/asan_global3_fail (1.00s)
--- PASS: TestASAN/asan_global1_fail (1.01s)
--- PASS: TestASAN/asan1_fail (1.01s)
--- PASS: TestASAN/asan_global2_fail (1.02s)
PASS
Fixes#54370
Change-Id: Iac13a1cf37de54432a6e49555f61e9ec1d781ab8
Reviewed-on: https://go-review.googlesource.com/c/go/+/422574
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
Run-TryBot: Archana Ravindar <aravind5@in.ibm.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Skip a collection of -buildmode=pie tests on alpine, which are
currently failing on the linux-amd64-alpine builder. Once #54354 has
been investigated and resolved we can turn these tests back on.
Updates #54354.
Change-Id: I99d4016a40873ee6bb4eda571a64eddbe719c76a
Reviewed-on: https://go-review.googlesource.com/c/go/+/422295
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
As it can't appear in user package paths.
There is a hack for handling "go:buildid" and "type:*" on windows/386.
Previously, windows/386 requires underscore prefix on external symbols,
but that's only applied for SHOSTOBJ/SUNDEFEXT or cgo export symbols.
"go.buildid" is STEXT, "type.*" is STYPE, thus they are not prefixed
with underscore.
In external linking mode, the external linker can't resolve them as
external symbols. But we are lucky that they have "." in their name,
so the external linker see them as Forwarder RVA exports. See:
- https://docs.microsoft.com/en-us/windows/win32/debug/pe-format#export-address-table
- https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=ld/pe-dll.c;h=e7b82ba6ffadf74dc1b9ee71dc13d48336941e51;hb=HEAD#l972)
This CL changes "." to ":" in symbols name, so theses symbols can not be
found by external linker anymore. So a hacky way is adding the
underscore prefix for these 2 symbols. I don't have enough knowledge to
verify whether adding the underscore for all STEXT/STYPE symbols are
fine, even if it could be, that would be done in future CL.
Fixes#37762
Change-Id: I92eaaf24c0820926a36e0530fdb07b07af1fcc35
Reviewed-on: https://go-review.googlesource.com/c/go/+/317917
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
These changes are enough to pass all.bash using the
disabled linux-amd64-alpine builder via debugnewvm.
For #19938.
For #39857.
Change-Id: I7d160612259c77764b70d429ad94f0864689cdce
Reviewed-on: https://go-review.googlesource.com/c/go/+/419995
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TestSetgidStress originally spawns 1000 threads for stress testing.
It caused timeout on some builders so CL 415677 reduced to 50 in
short mode. But it still causes flaky timeouts in longtest
builders, so reduce the number of threads in long mode as well.
Should fix#53641.
Change-Id: I02f4ef8a143bb1faafe3d11ad223f36f5cc245c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/419453
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
When using plugins, if the plugin and the main executable both
have the same function, and if it uses jump table, currently the
jump table symbol have the same name so it will be deduplicated by
the dynamic linker. This causes a function in the plugin may (in
the middle of the function) jump to the function with the same name
in the main executable (or vice versa). But the function may be
compiled slightly differently, because the plugin needs to be PIC.
Jumping from the middle of one function to the other will not work.
Avoid this problem by marking the jump table symbol local to a DSO.
Fixes#53989.
Change-Id: I2b573b9dfc22401c8a09ffe9b9ea8bb83d3700ca
Reviewed-on: https://go-review.googlesource.com/c/go/+/418960
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
-buildmode=shared installs shared libraries into GOROOT
and expects to reuse them across builds.
Builds in module mode, however, each have their own set of
dependencies (determined by the module's requirements), so in general
cannot share dependencies with a single GOROOT.
Ideally in the long term we would like to eliminate -buildmode=shared
entirely (see #47788), but first we need a replacement for the subset
of use-cases where it still works today.
In the meantime, we should run these tests only in GOPATH mode.
Non-main packages in module mode should not be installed to
GOPATH/pkg, but due to #37015 they were installed there anyway,
and this test heavily relies on installing non-main packages.
For #37015.
Change-Id: I7c5d90b4075d6f33e3505d6a8f12752309ae5c03
Reviewed-on: https://go-review.googlesource.com/c/go/+/417194
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Bryan Mills <bcmills@google.com>
Non-main packages in module mode should not be installed to
GOPATH/pkg, but due to #37015 they were installed there anyway.
This change switches the 'go install' command in createHeaders to
instead use 'go build' (with an extension determined by the install
target for 'runtime/cgo', which is well-defined at least for the
moment), and switches TestCachedInstall (which appears to be
explicitly testing 'go install') to explicitly request GOPATH mode
(which provides a well-defined install target for the library).
This change follows a similar structure to CL 416954.
For #37015.
Change-Id: I22ae4af0f0d4c50adc9e0f0dc279859d1f258cc8
Reviewed-on: https://go-review.googlesource.com/c/go/+/417096
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Non-main packages in module mode should not be installed to
GOPATH/pkg, but due to #37015 they were installed there anyway.
This change switches the 'go install' command in TestPIE to instead
use 'go build', and switches TestInstall and TestCachedInstall
(which appear to be explicitly testing 'go install') to explicitly
request GOPATH mode (which does have a well-defined install target).
For #37015.
Change-Id: Ifb24657d2781d1e35cf40078e8e3ebf56aab9cc8
Reviewed-on: https://go-review.googlesource.com/c/go/+/416954
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Bryan Mills <bcmills@google.com>
Auto-Submit: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TestSetgidStress spawns 1000 threads, which can be expensive on
some platforms or slow builders. Run with 50 threads in short
mode instead.
This makes the failure less reproducible even with buggy code. But
one can manually stress test it (e.g. when a flaky failure appear
on the builder).
Fixes#53641.
Change-Id: I33b5ea5ecaa8c7a56f59c16f9171657ee295db47
Reviewed-on: https://go-review.googlesource.com/c/go/+/415677
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cherry Mui <cherryyz@google.com>
When we create a thread with signals blocked. But glibc's
pthread_sigmask doesn't really allow us to block SIGSETXID. So we
may get a signal early on before the signal stack is set. If we
get a signal on the current stack, it will clobber anything below
the SP. This CL makes it to save LR and decrement SP in a single
MOVD.W instruction for small frames, so we don't write below the
SP.
We used to use a single MOVD.W instruction before CL 379075.
CL 379075 changed to use an STP instruction to save the LR and FP,
then decrementing the SP. This CL changes it back, just this part
(epilogues and large frame prologues are unchanged). For small
frames, it is the same number of instructions either way.
This decreases the size of a "small" frame from 0x1f0 to 0xf0.
For frame sizes in between, it could benefit from using an
STP instruction instead of using the prologue for the "large"
frame case. We don't bother it for now as this is a stop-gap
solution anyway.
This only addresses the issue with small frames. Luckily, all
functions from thread entry to setting up the signal stack have
samll frames.
Other possible ideas:
- Expand the unwind info metadata, separate SP delta and the
location of the return address, so we can express "SP is
decremented but the return address is in the LR register". Then
we can always create the frame first then write the LR, without
writing anything below the SP (except the frame pointer at SP-8,
which is minor because it doesn't really affect program
execution).
- Set up the signal stack immediately in mstart in assembly.
For Go 1.19 we do this simple fix. We plan to do the metadata fix
in Go 1.20 ( #53609 ).
Other LR architectures are addressed in CL 413428.
Fix#53374.
Change-Id: I9d6582ab14ccb06ac61ad43852943d9555e22ae5
Reviewed-on: https://go-review.googlesource.com/c/go/+/412474
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Eric Fang <eric.fang@arm.com>
Fixes#50710
Change-Id: I62feddbe3eaae9605d196bec60d378614436603a
Reviewed-on: https://go-review.googlesource.com/c/go/+/379754
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Fixes#52611
Change-Id: I835df8d6a98a37482446ec00af768c96fd8ee4fe
GitHub-Last-Rev: ea54dd69ee
GitHub-Pull-Request: golang/go#52733
Reviewed-on: https://go-review.googlesource.com/c/go/+/404497
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dexter Ouyang <kkhaike@gmail.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Alex Rakoczy <alex@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This fix is analogous to the one in CL 407888.
'go vet' catches the error, but it is not run on this file because the
file is (only) compiled when running testsanitizers/TestTSAN.
Fixes#53113.
Change-Id: I74f7b7390a9775ff00a06214c1019ba28846dd11
Reviewed-on: https://go-review.googlesource.com/c/go/+/409094
Auto-Submit: Bryan Mills <bcmills@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Bryan Mills <bcmills@google.com>
os/signal.Notify requires that "the caller must ensure that c has
sufficient buffer space to keep up with the expected signal rate"
as it does a nonblocking send when it receives a signal. The test
currently using a unbuffered channel, which means it may miss the
signal if the signal arrives before the channel receive operation.
Fixes#52998.
Change-Id: Icdcab9396d735506480ef880fb45a4669fa7cc8f
Reviewed-on: https://go-review.googlesource.com/c/go/+/407888
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
If the test hangs due to a deadlock in a subprocess, we want a
goroutine dump of that process to figure out the nature of the
deadlock. SIGQUIT causes the Go runtime to produce exactly
such a dump (unless the runtime itself is badly deadlocked).
For #52998.
Change-Id: Id9b3ba89d8f705e14f6cd789353fc2b7f4774ad3
Reviewed-on: https://go-review.googlesource.com/c/go/+/407954
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
Auto-Submit: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Contributors to the loong64 port are:
Weining Lu <luweining@loongson.cn>
Lei Wang <wanglei@loongson.cn>
Lingqin Gong <gonglingqin@loongson.cn>
Xiaolin Zhao <zhaoxiaolin@loongson.cn>
Meidan Li <limeidan@loongson.cn>
Xiaojuan Zhai <zhaixiaojuan@loongson.cn>
Qiyuan Pu <puqiyuan@loongson.cn>
Guoqi Chen <chenguoqi@loongson.cn>
This port has been updated to Go 1.15.6:
https://github.com/loongson/go
Updates #46229
Change-Id: I6760b4a7e51646773cd0f48baa1baba01b213b7d
Reviewed-on: https://go-review.googlesource.com/c/go/+/342325
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
The fix for #19534 (in CL 40994) adjusted escaping in the
dynamically-linked name lookup logic for the plugin package. However,
the regression test added for it incorrectly included quotes within
the -ldflags flag, causing the flag to inadvertently be ignored.
Possibly in that same CL or possibly at some other point, the
condition that the test thought it was checking stopped working: the
dynamic lookup used the path passed to ldflags, but the object file
actually contained the symbol indexed by the original package name.
Ideally we should stop mucking around with ldflags in this test and
run 'go build' from a suitably-named directory instead, to mimic the
actual conditions in which the original bug was reported. For now, as
a more targeted fix, we can pass the '-p' flag to the compiler to
adjust the package path used at compile time to match the one that
will be set at link time.
For #43177.
Updates #19534.
Change-Id: I9763961feb37cfb05dee543f273492e91a350663
Reviewed-on: https://go-review.googlesource.com/c/go/+/407314
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Auto-Submit: Bryan Mills <bcmills@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
If PATH doesn't contain GOROOT/bin as the first element, this could
otherwise end up running entirely the wrong command (and from the
wrong GOROOT, even).
I pre-tested this change on release-branch.go1.17 using a gomote.
I believe that it will fix the test failure on that branch,
but will need to be backported.
For #52995.
Change-Id: Ib0c43289a1e0ccf9409f0f0ef8046501a955ce65
Reviewed-on: https://go-review.googlesource.com/c/go/+/407294
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Auto-Submit: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CL 406358 added test that use -buildmode=plugin. But plugin mode only
supports on some os/arch pairs, so this CL moving the test to
misc/cgo/testplugin directory instead.
Updates #52937
Change-Id: Iad049443c1f6539f6af1988bebd4dff56c6e1bf9
Reviewed-on: https://go-review.googlesource.com/c/go/+/406774
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Add tests to test that -asan in Go can detect the error memory access
to the global objects.
Updates #44853.
Change-Id: I612a048460b497d18389160b66e6f818342d3941
Reviewed-on: https://go-review.googlesource.com/c/go/+/321716
Run-TryBot: Fannie Zhang <Fannie.Zhang@arm.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Benny Siegert <bsiegert@gmail.com>
With this patch, -asan option can detect the error memory
access to global variables.
So this patch makes a few changes:
1. Add the asanregisterglobals runtime support function,
which calls asan runtime function _asan_register_globals
to register global variables.
2. Create a new initialization function for the package
being compiled. This function initializes an array of
instrumented global variables and pass it to function
runtime.asanregisterglobals. An instrumented global
variable has trailing redzone.
3. Writes the new size of instrumented global variables
that have trailing redzones into object file.
4. Notice that the current implementation is only compatible with
the ASan library from version v7 to v9. Therefore, using the
-asan option requires that the gcc version is not less than 7
and the clang version is less than 4, otherwise a segmentation
fault will occur. So this patch adds a check on whether the compiler
being used is a supported version in cmd/go.
(This is a redo of CL 401775 with a fix for a build break due to an
intervening commit that removed the internal/execabs package.)
Updates #44853.
Change-Id: I719d4ef2b22cb2d5516e1494cd453c3efb47d6c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/403851
Auto-Submit: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
With this patch, -asan option can detect the error memory
access to global variables.
So this patch makes a few changes:
1. Add the asanregisterglobals runtime support function,
which calls asan runtime function _asan_register_globals
to register global variables.
2. Create a new initialization function for the package
being compiled. This function initializes an array of
instrumented global variables and pass it to function
runtime.asanregisterglobals. An instrumented global
variable has trailing redzone.
3. Writes the new size of instrumented global variables
that have trailing redzones into object file.
4. Notice that the current implementation is only compatible with
the ASan library from version v7 to v9. Therefore, using the
-asan option requires that the gcc version is not less than 7
and the clang version is less than 4, otherwise a segmentation
fault will occur. So this patch adds a check on whether the compiler
being used is a supported version in cmd/go.
Updates #44853.
Change-Id: Ib877a817209ab2be68a8e22c418fe4a4a20880fc
Reviewed-on: https://go-review.googlesource.com/c/go/+/401775
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
Auto-Submit: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
A plain make.bash in this tree will produce a working,
standard Go toolchain, not a BoringCrypto-enabled one.
The BoringCrypto-enabled one will be created with:
GOEXPERIMENT=boringcrypto ./make.bash
For #51940.
Change-Id: Ia9102ed993242eb1cb7f9b93eca97e81986a27b3
Reviewed-on: https://go-review.googlesource.com/c/go/+/395881
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
With this patch, -asan option can detect the error memory
access to global variables.
So this patch makes a few changes:
1. Add the asanregisterglobals runtime support function,
which calls asan runtime function _asan_register_globals
to register global variables.
2. Create a new initialization function for the package
being compiled. This function initializes an array of
instrumented global variables and pass it to function
runtime.asanregisterglobals. An instrumented global
variable has trailing redzone.
3. Writes the new size of instrumented global variables
that have trailing redzones into object file.
4. Notice that the current implementation is only compatible with
the ASan library from version v7 to v9. Therefore, using the
-asan option requires that the gcc version is not less than 7
and the clang version is less than 4, otherwise a segmentation
fault will occur. So this patch adds a check on whether the compiler
being used is a supported version in cmd/go.
Change-Id: I664e74dcabf5dc7ed46802859174606454e8f1d3
Reviewed-on: https://go-review.googlesource.com/c/go/+/321715
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Fannie Zhang <Fannie.Zhang@arm.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Rename it TestIssue1560 since it no longer sleeps.
For #1560Fixes#45586
Change-Id: I338eee9de43e871da142143943e9435218438e90
Reviewed-on: https://go-review.googlesource.com/c/go/+/400194
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
[This CL is part of a sequence implementing the proposal #51082.
The design doc is at https://go.dev/s/godocfmt-design.]
Run the updated gofmt, which reformats doc comments,
on the main repository. Vendored files are excluded.
For #51082.
Change-Id: I7332f099b60f716295fb34719c98c04eb1a85407
Reviewed-on: https://go-review.googlesource.com/c/go/+/384268
Reviewed-by: Jonathan Amsterdam <jba@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
After CL 379474 has landed, the only remaining cgo export header
incompatibility with MSVC is the use of the _Complex macro,
which is not supported in MSVC even when it is part of the ISO C99
standard (1).
Since MSVC 2015 (2), complex math are supported via _Fcomplex and
_Dcomplex, which are equivalent to float _Complex and double _Complex.
As MSVC and C complex types have the same memory layout, we should
be able to typedef GoComplex64 and GoComplex128 to the appropriate
type in MSVC.
It is important to note that this CL is not adding MSVC support to cgo.
C compilers should still be GCC-compatible.
This CL is about allowing to include, without further modifications,
a DLL export header generated by cgo, normally using Mingw-W64 compiler,
into a MSVC project. This was already possible if the export header
changes introduced in this CL were done outside cgo, either manually or
in a post-build script.
Fixes#36233
1: https://docs.microsoft.com/en-us/cpp/c-runtime-library/complex-math-support
2: https://docs.microsoft.com/en-us/cpp/overview/visual-cpp-language-conformance?c-standard-library-features-1
Change-Id: Iad8f26984b115c728e3b73f3a8334ade7a11cfa1
Reviewed-on: https://go-review.googlesource.com/c/go/+/397134
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Auto-Submit: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
When ASan is enabled, treat conversions to unsafe.Pointer as
an escaping operation. In this way, all pointer operations on
the stack objects will become operations on the escaped heap
objects. As we've already supported ASan detection of error
memory accesses to heap objects. With this trick, we can use
-asan option to report errors on bad stack operations.
Add test cases.
Updates #44853.
Change-Id: I6281e77f6ba581d7008d610f0b24316078b6e746
Reviewed-on: https://go-review.googlesource.com/c/go/+/393315
Trust: Fannie Zhang <Fannie.Zhang@arm.com>
Run-TryBot: Fannie Zhang <Fannie.Zhang@arm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Eric Fang <eric.fang@arm.com>
This reverts commit 5fd0ed7aaf.
Reason for revert: <The internal information in commit message is not removed.>
Change-Id: Id6845a9c8114ac71c56a1007a4d133a560a37fbc
Reviewed-on: https://go-review.googlesource.com/c/go/+/393314
Trust: Fannie Zhang <Fannie.Zhang@arm.com>
Reviewed-by: Eric Fang <eric.fang@arm.com>
When plugin is used, we already mark all exported methods
reachable. However, when the plugin and the host program share
a common package, an unexported method could also be reachable
from both the plugin and the host via interfaces. We need to mark
them as well.
Fixes#51621.
Change-Id: I1a70d3f96b66b803f2d0ab14d00ed0df276ea500
Reviewed-on: https://go-review.googlesource.com/c/go/+/393365
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
