This was removed in change 285692, however we need to explicitly pull libc.so
in when libpthread.so is being used. The current code works on openbsd/amd64
since we pull libc.so in via runtime/sys_openbsd2.go, however openbsd/arm64
does not do this currently.
Change-Id: Ibe93d936a22e69e2fe12620f6d27ccca7a91dba5
Reviewed-on: https://go-review.googlesource.com/c/go/+/285912
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
The example for WriteFile assumed the existence of a testdata/ directory, which is not present on the playground. The example now writes the file to the current working directory, rather than to testdata/.
Fixes#32916
Change-Id: I577caac7e67ba9d9941b2dd19346ad5ff61e78d9
GitHub-Last-Rev: 40f14e0adc
GitHub-Pull-Request: golang/go#43757
Reviewed-on: https://go-review.googlesource.com/c/go/+/284452
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Bryan C. Mills <bcmills@google.com>
In msan mode we instrument code with msan* functions, including
msanmove. In some configurations the code is instrumented by the
compiler but msan is not actually linked in, so we need dummy
definitions for those functions so the program links. msanmove is
newly added in CL 270859 but a dummy definition in msan0.go was
not added, causing link failures. Add it.
Change-Id: I91f8e749919f57f1182e90b43412b0282cf4767c
Reviewed-on: https://go-review.googlesource.com/c/go/+/285955
Trust: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In the signal handler, we adjust gsingal's stack to the stack
where the signal is delivered. TSAN may deliver signals to the
g0 stack, so we have a special case for the g0 stack. However,
we don't have very good accuracy in determining the g0 stack's
bounds, as it is system allocated and we don't know where it is
exactly. If g0.stack.lo is too low, the condition may be
triggered incorrectly, where we thought the signal is delivered to
the g0 stack but it is actually not. In this case, as the stack
bounds is actually wrong, when the stack grows, it may go below
the (inaccurate) lower bound, causing "morestack on gsignal"
crash.
Check for g0 stack last to avoid this situation. There could still
be false positives, but for those cases we'll crash either way.
(If we could in some way determine the g0 stack bounds accurately,
this would not matter (but probably doesn't hurt).)
Fixes#43853.
Change-Id: I759717c5aa2b0deb83ffb23e57b7625a6b249ee8
Reviewed-on: https://go-review.googlesource.com/c/go/+/285772
Trust: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Previously, if CC was a path without separators (like gcc or clang),
we'd look it up in PATH in cmd/go using internal/execabs.LookPath,
then pass the resolved path to cgo in CC.
This caused a regression: if the directory in PATH containing CC has a
space, cgo splits it and interprets it as multiple arguments.
With this change, cmd/go no longer resolves CC before invoking
cgo. cgo does the path lookup on each invocation. This reverts the
security fix CL 284780, but that was redundant with the addition of
internal/execabs (CL 955304), which still protects us.
Fixes#43808
Updates #41400
Change-Id: I65d91a1e303856df8653881eb6e2e75a3bf95c49
Reviewed-on: https://go-review.googlesource.com/c/go/+/285873
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Use libc rather than performing direct system calls for the runtime on
openbsd/amd64.
Updates #36435
Change-Id: Ib708009c3743f56a3fd6cb3bc731451e4a398849
Reviewed-on: https://go-review.googlesource.com/c/go/+/270379
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The TestEmbedPatterns, TestEmbedFiles, XTestEmbedPatterns, and
XTestEmbedFiles fields were left out of golang.org/cl/282195 which was
supposed to document the embed fields available in the go list
output. Add documentation for them in this CL.
Fixes#43081
Change-Id: Ifc256c476daec7c0f0e2c41f86b82f958b3e2b1a
Reviewed-on: https://go-review.googlesource.com/c/go/+/284258
Trust: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
We're now using getthrid() and thrkill() instead.
Updates #36435
Change-Id: I1c6bcfb9b46d149e0a2a10e936a244576489a88e
Reviewed-on: https://go-review.googlesource.com/c/go/+/285692
Trust: Joel Sing <joel@sing.id.au>
Run-TryBot: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This test hijacks a connection. It was reading from the net.Conn
returned by Hijack, not the bufio.ReadWriter, causing flaky failures
when a read-ahead byte was held in the read buffer.
Fixes#43073.
Change-Id: Ic3e7f704fba9635fd851cb3c0c0c74e312b75f6e
Reviewed-on: https://go-review.googlesource.com/c/go/+/285596
Trust: Damien Neil <dneil@google.com>
Run-TryBot: Damien Neil <dneil@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Anmol Sethi <nhooyr@gmail.com>
For #40700
Change-Id: If105d2f043539bb0893f577a984f14ee3e7ca753
Reviewed-on: https://go-review.googlesource.com/c/go/+/285212
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
If the program path is resolved, replace the first argument of the
exec.Cmd, which is the bare program name with the resolved path.
Change-Id: I92cf5e6f4bb7c8fef9b59f5eab963f4e75b90d07
Reviewed-on: https://team-review.git.corp.google.com/c/golang/go-private/+/957908
Reviewed-by: Katie Hockman <katiehockman@google.com>
Reviewed-by: Russ Cox <rsc@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-on: https://go-review.googlesource.com/c/go/+/284784
Trust: Roland Shoemaker <roland@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Roland Shoemaker <roland@golang.org>
Introduces a wrapper around os/exec, internal/execabs, for use in
all commands. This wrapper prevents exec.LookPath and exec.Command from
running executables in the current directory.
All imports of os/exec in non-test files in cmd/ are replaced with
imports of internal/execabs.
This issue was reported by RyotaK.
Fixes CVE-2021-3115
Fixes#43783
Change-Id: I0423451a6e27ec1e1d6f3fe929ab1ef69145c08f
Reviewed-on: https://team-review.git.corp.google.com/c/golang/go-private/+/955304
Reviewed-by: Russ Cox <rsc@google.com>
Reviewed-by: Katie Hockman <katiehockman@google.com>
Reviewed-on: https://go-review.googlesource.com/c/go/+/284783
Run-TryBot: Roland Shoemaker <roland@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Change-Id: I0e6bebf0e2e6efdef4be880e0c6c7451b938924b
Reviewed-on: https://team-review.git.corp.google.com/c/golang/go-private/+/949417
Reviewed-by: Katie Hockman <katiehockman@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-on: https://go-review.googlesource.com/c/go/+/284781
Run-TryBot: Roland Shoemaker <roland@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
This makes sure the go command and cgo agree about
exactly which compiler is being used.
This issue was reported by RyotaK.
Fixes CVE-2021-3115
Fixes#43783
Change-Id: If171c5c8b2523efb5ea2d957e5ad1380a038149c
Reviewed-on: https://team-review.git.corp.google.com/c/golang/go-private/+/949416
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-on: https://go-review.googlesource.com/c/go/+/284780
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
This switches openbsd/arm64 to thread creation via pthreads, rather than doing
direct system calls.
Update #36435
Change-Id: I7cf60fa954f92628e05f15d2732833a2fbdccdb9
Reviewed-on: https://go-review.googlesource.com/c/go/+/250182
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This patch fixes two independent bugs in p224Contract, the function that
performs the final complete reduction in the P-224 field. Incorrect
outputs due to these bugs were observable from a high-level
P224().ScalarMult() call.
The first bug was in the calculation of out3GT. That mask was supposed
to be all ones if the third limb of the value is greater than the third
limb of P (out[3] > 0xffff000). Instead, it was also set if they are
equal. That meant that if the third limb was equal, the value was always
considered greater than or equal to P, even when the three bottom limbs
were all zero. There is exactly one affected value, P - 1, which would
trigger the subtraction by P even if it's lower than P already.
The second bug was more easily hit, and is the one that caused the known
high-level incorrect output: after the conditional subtraction by P, a
potential underflow of the lowest limb was not handled. Any values that
trigger the subtraction by P (values between P and 2^224-1, and P - 1
due to the bug above) but have a zero lowest limb would produce invalid
outputs. Those conditions apply to the intermediate representation
before the subtraction, so they are hard to trace to precise inputs.
This patch also adds a test suite for the P-224 field arithmetic,
including a custom fuzzer that automatically explores potential edge
cases by combining limb values that have various meanings in the code.
contractMatchesBigInt in TestP224Contract finds the second bug in less
than a second without being tailored to it, and could eventually find
the first one too by combining 0, (1 << 28) - 1, and the difference of
(1 << 28) and (1 << 12).
The incorrect P224().ScalarMult() output was found by the
elliptic-curve-differential-fuzzer project running on OSS-Fuzz and
reported by Philippe Antoine (Catena cyber).
Fixes CVE-2021-3114
Fixes#43786
Change-Id: I50176602d544de3da854270d66a293bcaca57ad7
Reviewed-on: https://go-review.googlesource.com/c/go/+/284779
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Ian Lance Taylor <iant@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Expand the scope of the TestAllDependenciesVendored test to check
that all modules in GOROOT are tidy, that packages are vendored,
the vendor content matches the upstream copy exactly, and that
bundled packages are re-generated (using x/tools/cmd/bundle at
the version selected in cmd module; this is deterministic and
guaranteed to be updated over time).
This is done in a conceptually simple way:
1. Make a temporary copy of the entire GOROOT tree (except .git),
one that is safe to modify.
2. Run a list of high-level commands, the same commands we expect
Go developers should be able to run in a normal complete GOROOT
tree to make it clean and tidy.
3. Diff the end result with the original GOROOT tree being tested
to catch any unexpected differences.
The current set of commands that are run require the cmd/go command,
and a functional compiler itself (because re-generating the syscall
package involves a directive like //go:generate go run [...]). As a
result, copying a large majority of the GOROOT tree is a requirement.
Instead of looking for the few files or directories that can we can
get away not copying (e.g., the testdata directories aren't strictly
needed at this time), we opt not to optimize and just do the simple
copy. This is motivated by these reasons:
• We end up having a complete, normal GOROOT tree, one that happens
to be located at another path. There's a very high likelihood that
module management/code generation commands, both the ones we run
today and any additional ones that we might want to add in the
future, will result in correct results even as the Go project
evolves over time.
• Having a completely stand-alone copy of the GOROOT tree without
symlinks minimizes the risk of some of the module management/code
generation commands, either now or in the future, from modifying
the user's original GOROOT tree, something that should not happen
during test execution. Overlays achieved with symlinks work well
when we can guarantee only new files are added, but that isn't
the case here.
• Copying the entire GOROOT (without .git), takes around 5 seconds
on a fairly modern computer with an SSD. The most we can save is
a couple of seconds.
(We make some minor exceptions: the GOROOT/.git directory isn't copied,
and GOROOT/{bin,pkg} are deemed safe to share and thus symlink instead
of copying. If these optimizations cease to be viable to make, we'll
need to remove them.)
Since this functionality is fairly expensive to execute and requires
network access, it runs only when the test is executed without -short
flag. The previous behavior of the TestAllDependenciesVendored test is
kept in -short test mode. all.bash runs package tests with -short flag,
so its behavior is unchanged. The expectation is that the new test will
run on some of the longtest builders to catch problems. Users can invoke
the test manually 'go test cmd/internal/moddeps' (and it's run as part
of 'go test cmd', again, only when -short flag isn't provided).
On a 2017 MacBook Pro, a successful long test takes under 15 seconds,
which should be within scope of all long tests that are selected by
'go test std cmd'. We may further adjust when and where the test runs
by default based on our experience.
Fixes#36852.
Fixes#41409.
Fixes#43687.
Updates #43440.
Change-Id: I9eb85205fec7ec62e3f867831a0a82e3c767f618
Reviewed-on: https://go-review.googlesource.com/c/go/+/283643
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Before this CL, the following sequence was possible:
* GC scavenger starts and sets up scavenge.timer
* GC calls readyForScavenger, but sysmon is sleeping
* program calls runtime.GOMAXPROCS to shrink number of processors
* procresize destroys a P, the one that scavenge.timer is on
* (*pp).destroy calls moveTimers, which gets to the scavenger timer
* scavenger timer is timerWaiting, and moveTimers clears t.pp
* sysmon wakes up and calls wakeScavenger
* wakeScavengers calls stopTimer on scavenger.timer, still timerWaiting
* stopTimer calls deltimer which loads t.pp, which is still nil
* stopTimer tries to increment deletedTimers on nil t.pp, and crashes
The point of vulnerability is the time that t.pp is set to nil by
moveTimers and the time that t.pp is set to non-nil by moveTimers,
which is a few instructions at most. So it's not likely and in
particular is quite unlikely on x86. But with a more relaxed memory
model the area of vulnerability can be somewhat larger. This appears
to tbe the cause of two builder failures in a few months on linux-mips.
This CL fixes the problem by making moveTimers change the status from
timerWaiting to timerMoving while t.pp is clear. That will cause
deltimer to wait until the status is back to timerWaiting, at which
point t.pp has been set again.
Fixes#43712
Change-Id: I66838319ecfbf15be66c1fac88d9bd40e2295852
Reviewed-on: https://go-review.googlesource.com/c/go/+/284775
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
If no files match the embed pattern, the Error field will be set on
the package output by go list. Also set the Incomplete field for
consistency.
Fixes#43727
Change-Id: I5b4bb2a03a751269641a9bc4ef1d0fa0e37d46aa
Reviewed-on: https://go-review.googlesource.com/c/go/+/284257
Trust: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
If a package vendored with go mod vendor depends on embedded
files contained in subdirectories, copy them into the the
corresponding place in the module's vendor tree. (Embeds in
parent directories are disallowed by the embed pattern rules, and
embeds in the same directory are copied because go mod vendor
already copies the non-go files in the package's own directory).
Export the vendor pattern expansion code in internal/load so
internal/modcmd's vendor code can use it.
Fixes#43077
Change-Id: I61edb344d73df590574a6498ffb6069e8d72a147
Reviewed-on: https://go-review.googlesource.com/c/go/+/283641
Trust: Michael Matloob <matloob@golang.org>
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Switch openbsd/amd64 to locking via libc, rather than performing direct
system calls.
Update #36435
Change-Id: I5e92bd70ce557b78ff385577088a9775cc468ea9
Reviewed-on: https://go-review.googlesource.com/c/go/+/270378
Trust: Joel Sing <joel@sing.id.au>
Run-TryBot: Joel Sing <joel@sing.id.au>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This will produce better errors when earlier versions of
Go compile code using //go:embed. (The import will cause
a compilation error but then the go command will add to
the output that the Go toolchain in use looks too old
and maybe that's the problem.)
This CL also adds a test for disallowing embed of a var inside a func.
It's a bit too difficult to rebase down into that CL.
The build system configuration check is delayed in order to
make it possible to use errorcheck for these tests.
Change-Id: I12ece4ff2d8d53380b63f54866e8f3497657d54c
Reviewed-on: https://go-review.googlesource.com/c/go/+/282718
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
If there are already errors emitted, don't run the Asmb2 pass
and just exit. At the point of Asmb2 relocations are already
resolved and errors should have been reported, if any. Asmb2 is
unlikely to emit additional useful users errors. Instead, the
invalid input may cause inconsistencies and crash the linker, or
it may emit some internal errors which are more confusing than
helpful. Exit on error before Asmb2.
Fixes#43748.
Change-Id: Icf6e27f2eef5b6259e921ec0e64bebad5dd805f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/284576
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
As described in the FS documentation.
This prevents http.FS and other clients from panicking when the
go:embed directive is missing.
For #43682
Related #43698
Change-Id: Iecf26d229a099e55d24670c3119cd6c6d17ecc6e
Reviewed-on: https://go-review.googlesource.com/c/go/+/283852
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This switches openbsd/amd64 to thread creation via pthreads, rather than doing
direct system calls.
Update #36435
Change-Id: I1105d5c392aa3e4c445d99c8cb80b927712e3529
Reviewed-on: https://go-review.googlesource.com/c/go/+/250180
Trust: Joel Sing <joel@sing.id.au>
Run-TryBot: Joel Sing <joel@sing.id.au>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Rather than inline lists of GOOS values, factor out the code that checks
if a runtime makes system calls via libcall.
Change-Id: Ib19d7e63a2b4b8314f1841c0ff26e1b3a16b4b22
Reviewed-on: https://go-review.googlesource.com/c/go/+/259239
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Joel Sing <joel@sing.id.au>
TryBot-Result: Go Bot <gobot@golang.org>
Rather than repeat long lists of GOOS values, factor out the code that checks
if a runtime starts on a system allocated stack. Note that this adds aix to
one case, which appears to have been previously missed.
Change-Id: I5cecb0bb47dd79cde8d723e5a42ba541e43cbfff
Reviewed-on: https://go-review.googlesource.com/c/go/+/250179
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Joel Sing <joel@sing.id.au>
TryBot-Result: Go Bot <gobot@golang.org>
Calls to lock may need to use global members of mOS that also need to be
cleaned up before the thread exits. Before this commit, these resources
would leak. Moving them to be cleaned up in unminit, however, would race
with gstack on unix. So this creates a new helper, mdestroy, to release
resources that must be destroyed only after locks are no longer
required. We also move highResTimer lifetime to the same semantics,
since it doesn't help to constantly acquire and release the timer object
during dropm.
Updates #43720.
Change-Id: Ib3f598f3fda1b2bbcb608099616fa4f85bc1c289
Reviewed-on: https://go-review.googlesource.com/c/go/+/284137
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Trust: Alex Brainman <alex.brainman@gmail.com>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
By calling NewConsoleFile on syscall.Stdin, we wind up closing it when
the function returns, which causes errors when all the tests are run in
a loop. To fix this, we instead create a duplicate handle of stdin.
Fixes#43720.
Change-Id: Ie6426e6306c7e1e39601794f4ff48bbf2fe67502
Reviewed-on: https://go-review.googlesource.com/c/go/+/284140
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
These functions rely on DuplicateHandle succeeding, but they don't check
the return value, which might be masking subtle bugs that cause other
problems down the line.
Updates #43720.
Change-Id: I77f0e6645affa534777ffc173144a52e4afa5f81
Reviewed-on: https://go-review.googlesource.com/c/go/+/284135
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Austin Clements <austin@google.com>
Trust: Alex Brainman <alex.brainman@gmail.com>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
Tests should avoid writing to GOROOT when possible. Such writes
would fail if GOROOT is non-writeable, and it can interfere with
other tests that don't expect GOROOT to change during test execution.
Updates #28387.
Change-Id: I7d72614f218df3375540f5c2f9c9f8c11034f602
Reviewed-on: https://go-review.googlesource.com/c/go/+/284293
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The current implementation requires saying "string" or "[]byte"
and disallows aliases, defined types, and even "[]uint8".
This was not 100% intended and mostly just fell out of when
the checks were being done in the implementation (too early,
before typechecking).
After discussion on #43217 (forked into #43602),
the consensus was to allow all string and byte slice types,
same as we do for string conversions in the language itself.
This CL does that.
It's more code than you'd expect because the decision has
to be delayed until after typechecking.
But it also more closely aligns with the version that's
already on dev.regabi.
Fixes#43602.
Change-Id: Iba919cfadfbd5d7116f2bf47e2512fb1d5c36731
Reviewed-on: https://go-review.googlesource.com/c/go/+/282715
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Allowing embedding into []byte inside a func creates an
unfortunate problem: either all calls start with the same
underlying data and can see each other's changes to the
underlying data (surprising and racy!) or all calls start
by making their own copy of the underlying data
(surprising and expensive!).
After discussion on #43216, the consensus was to remove
support for all vars embedded inside functions.
Fixes#43216.
Change-Id: I01e62b5f0dcd9e8566c6d2286218e97803f54704
Reviewed-on: https://go-review.googlesource.com/c/go/+/282714
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
The docs were never updated for the change to the placement
of the DO NOT EDIT line.
Also, the description of the DO NOT EDIT line interrupted the
description of the //go:generate line, which made for some
confusing references in the text that followed. Move it lower.
Fixes#41196.
Change-Id: I6af2a199fa98d45f5ccac7cdf7e9e54257699e61
Reviewed-on: https://go-review.googlesource.com/c/go/+/283633
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
There's on need to expose this to the frozen syscall package, and it
also doesn't need to be unsafe. So we move it into internal/syscall and
have the generator make a safer function signature.
Fixes#43704.
Change-Id: Iccae69dc273a0aa97ee6846eb537f1dc1412f2de
Reviewed-on: https://go-review.googlesource.com/c/go/+/283992
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
Previously, testKillProcess needlessly invoked processKiller in a
separate goroutine and failed to wait for that goroutine to complete,
causing the calls to t.Fatalf in that goroutine to potentially occur
after the test function had already returned.
Fixes#43722
Change-Id: I5d03cb24af51bb73f0ff96419dac57ec39776967
Reviewed-on: https://go-review.googlesource.com/c/go/+/284153
Trust: Bryan C. Mills <bcmills@google.com>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Go Bot <gobot@golang.org>
On Apple Silicon Mac, the C compiler has an annoying default
target selection, depending on the ancestor processes'
architecture. In particular, if the shell or IDE is x86, when
running "go build" even with a native ARM64 Go toolchain, the C
compiler defaults to x86, causing build failures. We pass "-arch"
flag explicitly to avoid this situation.
Fixes#43692.
Fixes#43476.
Updates golang/vscode-go#1087.
Change-Id: I80b6a116a114e11e273c6886e377a1cc969fa3f6
Reviewed-on: https://go-review.googlesource.com/c/go/+/283812
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The cgo header has an unnecessary space in the exported function
definition on non-windows goos.
This was introduced in go1.16 so it would be good to fix it before
release.
Example:
// Current behavior, notice there is an unecessary space
// between extern and void
extern void Foo();
// With this CL
extern void Foo();
Change-Id: Ic2c21f8d806fe35a7be7183dbfe35ac605b6e4f6
Reviewed-on: https://go-review.googlesource.com/c/go/+/283892
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Katie Hockman <katie@golang.org>
