The postinstall script causes the installation to fail because the last
step that copies files for Xcode is broken. Two details can cause the
command to fail:
1. The XCODE_MISC_DIR value has a space. Without quotes in the cp
command, cp will just complain that this is an invalid syntax.
2. The source of the cp is a directory with two subdirectories.
We actually want the files for either Xcode 3 or Xcode 4 to be copied.
Using xcodebuild -version, we check for the Xcode version and
select which of xcode/3/* or xcode/4/* should be the source
of the copy.
Fixes#5874.
R=golang-dev, minux.ma, adg
CC=golang-dev
https://golang.org/cl/10893044
Before:
$ go test -c -cover fmt
$ ./fmt.test -test.covermode=set
PASS
coverage: 65.1% of statements in strconv
$
After:
$ go test -c -cover fmt
$ ./fmt.test
PASS
coverage: 65.1% of statements in strconv
$
In addition to being cumbersome, the old flag didn't make sense:
the cover mode cannot be changed after the binary has been built.
Another useful effect of this CL is that if you happen to do
$ go test -c -covermode=atomic fmt
and then forget you did that and run benchmarks,
the final line of the output (the coverage summary) reminds you
that you are benchmarking with coverage enabled, which might
not be what you want.
$ ./fmt.test -test.bench .
PASS
BenchmarkSprintfEmpty 10000000 217 ns/op
BenchmarkSprintfString 2000000 755 ns/op
BenchmarkSprintfInt 2000000 774 ns/op
BenchmarkSprintfIntInt 1000000 1363 ns/op
BenchmarkSprintfPrefixedInt 1000000 1501 ns/op
BenchmarkSprintfFloat 1000000 1257 ns/op
BenchmarkManyArgs 500000 5346 ns/op
BenchmarkScanInts 1000 2562402 ns/op
BenchmarkScanRecursiveInt 500 3189457 ns/op
coverage: 91.4% of statements
$
As part of passing the new mode setting in via _testmain.go, merge
the two registration mechanisms into one extensible mechanism
(a struct).
R=r
CC=golang-dev
https://golang.org/cl/11219043
I want to think more carefully about this.
We put this in because Marshal encoded named []byte but Unmarshal rejected them.
And we noticed that Marshal's behavior was undocumented so we documented it.
But I am starting to think the docs and Unmarshal were correct and Marshal's
behavior was the problem.
Rolling back to give us more time to think.
««« original CL description
json: unmarshal types that are byte slices.
The json package cheerfully would marshal
type S struct {
IP net.IP
}
but would give an error when unmarshalling. This change allows any
type whose concrete type is a byte slice to be unmarshalled from a
string.
Fixes#5086.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/11161044
»»»
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/11042046
In practice, rejecting an entire structure due to a single invalid byte
in a string is just too picky, and too hard to track down.
Be consistent with the bulk of the standard library by converting
invalid UTF-8 into UTF-8 with replacement runes.
R=golang-dev, crawshaw
CC=golang-dev
https://golang.org/cl/11211045
Recently addition to runtime test makes it take very close to 720s
of timeout limit on the netbsd-arm-qemu builder.
R=golang-dev, go.peter.90, rsc
CC=golang-dev
https://golang.org/cl/10935043
Deferred functions are not run by a call instruction. They are run by
the runtime editing registers to make the call start with a caller PC
returning to a
CALL deferreturn
instruction.
That instruction has always had the line number of the function's
closing brace, but that instruction's line number is irrelevant.
Stack traces show the line number of the instruction before the
return PC, because normally that's what started the call. Not so here.
The instruction before the CALL deferreturn could be almost anywhere
in the function; it's unrelated and its line number is incorrect to show.
Fix the line number by inserting a true hardware no-op with the right
line number before the returned-to CALL instruction. That is, the deferred
calls now appear to start with a caller PC returning to the second instruction
in this sequence:
NOP
CALL deferreturn
The traceback will show the line number of the NOP, which we've set
to be the line number of the function's closing brace.
The NOP here is not the usual pseudo-instruction, which would be
elided by the linker. Instead it is the real hardware instruction:
XCHG AX, AX on 386 and amd64, and AND.EQ R0, R0, R0 on ARM.
Fixes#5856.
R=ken2, ken
CC=golang-dev
https://golang.org/cl/11223043
If the stack frame size is larger than the known-unmapped region at the
bottom of the address space, then the stack split prologue cannot use the usual
condition:
SP - size >= stackguard
because SP - size may wrap around to a very large number.
Instead, if the stack frame is large, the prologue tests:
SP - stackguard >= size
(This ends up being a few instructions more expensive, so we don't do it always.)
Preemption requests register by setting stackguard to a very large value, so
that the first test (SP - size >= stackguard) cannot possibly succeed.
Unfortunately, that same very large value causes a wraparound in the
second test (SP - stackguard >= size), making it succeed incorrectly.
To avoid *that* wraparound, we have to amend the test:
stackguard != StackPreempt && SP - stackguard >= size
This test is only used for functions with large frames, which essentially
always split the stack, so the cost of the few instructions is noise.
This CL and CL 11085043 together fix the known issues with preemption,
at the beginning of a function, so we will be able to try turning it on again.
R=ken2
CC=golang-dev
https://golang.org/cl/11205043
This is a transcript before this change. I've capitalized the text being removed.
Note that it is always near another line that already says fmt, marked with <<<
$ cd $GOROOT/src/pkg/fmt
$ go test -cover
PASS
coverage FOR FMT: 91.3% of statements
ok fmt 0.040s <<<
$ go test -coverpkg strconv
PASS
coverage FOR FMT: 64.9% of statements in strconv
ok fmt 0.039s <<<
$ go test -cover -c
$ ./fmt.test -test.covermode=set <<<
PASS
coverage FOR FMT: 91.3% of statements
$ go test -coverpkg strconv -c
$ ./fmt.test -test.covermode=set <<<
PASS
coverage FOR FMT: 64.9% of statements in strconv
That the summary printed by 'go test [options] fmt' is unchanged:
$ go test -cover fmt
ok fmt 0.040s coverage: 91.3% of statements
$ go test -coverpkg strconv fmt
ok fmt 0.038s coverage: 64.9% of statements in strconv
R=r
CC=gobot, golang-dev
https://golang.org/cl/10932045
The current cas64 definition hard-codes the x86 behavior
of updating *old with the new value when the cas fails.
This is inconsistent with cas32 and casp.
Make it consistent.
This means that the cas64 uses will be epsilon less efficient
than they might be, because they have to do an unnecessary
memory load on x86. But so be it. Code clarity and consistency
is more important.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/10909045
The static func named thread in issue5337.go's C snippet
conflicts with the static func named thread in issue3350.go's C snippet.
I don't know why (they're both static) but I also don't care,
because -linkmode=internal only needs to be able to handle
the cgo in the standard library, and it does.
Change the test to avoid this problem.
Fixes build (after run.bash is fixed to detect the breakage).
R=minux.ma
TBR=minux.ma
CC=golang-dev
https://golang.org/cl/11201043
STRINGSZ (200) is fine for lines generated by things like
instruction dumps, but an error containing a couple file
names can easily exceed that, especially on Macs with
the ridiculous default $TMPDIR.
R=ken2
CC=golang-dev
https://golang.org/cl/11199043
The json package cheerfully would marshal
type S struct {
IP net.IP
}
but would give an error when unmarshalling. This change allows any
type whose concrete type is a byte slice to be unmarshalled from a
string.
Fixes#5086.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/11161044
when the program is not main package, `go run x.go` can't return the
link error message. so use `go run x.go` in instead `go build x.go`.
Fixes#5865.
R=golang-dev, adg
CC=golang-dev
https://golang.org/cl/11165043
1. "int e;" is unused, generating "unused variable" error.
2. a->e was typed void *[2], but was accessed with *(int *)(a->e), this
generated "dereferencing type-punned pointer will break strict-aliasing rules" error.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/11009043
runtime.newproc/ready are deliberately sloppy about waking new M's,
they only ensure that there is at least 1 spinning M.
Currently to compensate for that, schedule() checks if the current P
has local work and there are no spinning M's, it wakes up another one.
It does not work if goroutines do not call schedule.
With this change a spinning M wakes up another M when it finds work to do.
It's also not ideal, but it fixes the underutilization.
A proper check would require to know the exact number of runnable G's,
but it's too expensive to maintain.
Fixes#5586.
This is reincarnation of cl/9776044 with the bug fixed.
The bug was due to code added after cl/9776044 was created:
if(tick - (((uint64)tick*0x4325c53fu)>>36)*61 == 0 && runtime·sched.runqsize > 0) {
runtime·lock(&runtime·sched);
gp = globrunqget(m->p, 1);
runtime·unlock(&runtime·sched);
}
If M gets gp from global runq here, it does not reset m->spinning.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/10743044
Currently it crashes as follows:
fatal error: unknown pc
...
goroutine 71698 [runnable]:
runtime.racegoend()
src/pkg/runtime/race.c:171
runtime.goexit()
src/pkg/runtime/proc.c:1276 +0x9
created by runtime_test.testConcurrentReadsAfterGrowth
src/pkg/runtime/map_test.go:264 +0x332
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/10674047
If you compute the size by subtraction from the address
of the next symbol, it helps to wait until the symbols have
been sorted by address.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/11143043
The notion of a named type is crucial for the definition
of type identity, assignability, definitions of methods.
Explicitly introduce the notion with an extra sentence.
Fixes#5682.
R=r, rsc, iant
CC=golang-dev
https://golang.org/cl/11055043
Merging a couple of CLs into one, since they collided in my client
and I'm lazy.
1) Fix up output in "go test -cover" case.
We need to tell the testing package the name of the package being tested
and the name of the package being covered. It can then sort out the report.
2) Filter out the _test.go files from coverage processing. We want to measure
what the tests cover, not what's covered in the tests,
The coverage for encoding/gob goes from 82.2% to 88.4%.
There may be a cleaner way to do this - suggestions welcome - but ça suffit.
Fixes#5810.
R=rsc
CC=golang-dev
https://golang.org/cl/10868047
