When scanning a hex byte at EOF, the code was ungetting the eof,
which backed up the input and caused double-scanning of a byte.
Delete the call to UnreadRune.
This line appeared in 1.5 for some reason; it was not in 1.4 and
should be removed again for 1.5
Fixes#12090.
Change-Id: Iad1ce8e7db8ec26615c5271310f4b0228cca7d78
Reviewed-on: https://go-review.googlesource.com/13461
Reviewed-by: Andrew Gerrand <adg@golang.org>
Fixes#12062
Updates #11961
The sRPC nameservice was removed in pepper 42. For Go 1.5 stipulate
that NaCl requires pepper 41 only.
Change-Id: Ic88ba342d41f673391efaa96fb581712fa10a0fd
Reviewed-on: https://go-review.googlesource.com/13341
Reviewed-by: Andrew Gerrand <adg@golang.org>
Changes the torture test in #12068 from failing about 1/10 times
to not failing in almost 2,000 runs.
This was only happening in -race mode because functions are
bigger in -race mode, so a few of the helpers for heapBitsBulkBarrier
were not being inlined, and they were not marked nosplit,
so (only in -race mode) the write barrier was being preempted by GC,
causing missed pointer updates.
Filed issue #12069 for diagnosis of any other similar errors.
Fixes#12068.
Change-Id: Ic174d9b050ba278b18b08ab0d85a73c33bd5b175
Reviewed-on: https://go-review.googlesource.com/13364
Reviewed-by: Austin Clements <austin@google.com>
Also, crash early on non-Linux SMP ARM systems when GOARM < 7;
without the proper synchronization, SMP cannot work.
Linux is okay because we call kernel-provided routines for
synchronization and barriers, and the kernel takes care of
providing the right routines for the current system.
On non-Linux systems we are left to fend for ourselves.
It is possible to use different synchronization on GOARM=6,
but it's too late to do that in the Go 1.5 cycle.
We don't believe there are any non-Linux SMP GOARM=6 systems anyway.
Fixes#12067.
Change-Id: I771a556e47893ed540ec2cd33d23c06720157ea3
Reviewed-on: https://go-review.googlesource.com/13363
Reviewed-by: Austin Clements <austin@google.com>
Currently, runtime.Goexit() calls goexit()—the goroutine exit stub—to
terminate the goroutine. This *mostly* works, but can cause a
"leftover stack barriers" panic if the following happens:
1. Goroutine A has a reasonably large stack.
2. The garbage collector scan phase runs and installs stack barriers
in A's stack. The top-most stack barrier happens to fall at address X.
3. Goroutine A unwinds the stack far enough to be a candidate for
stack shrinking, but not past X.
4. Goroutine A calls runtime.Goexit(), which calls goexit(), which
calls goexit1().
5. The garbage collector enters mark termination.
6. Goroutine A is preempted right at the prologue of goexit1() and
performs a stack shrink, which calls gentraceback.
gentraceback stops as soon as it sees goexit on the stack, which is
only two frames up at this point, even though there may really be many
frames above it. More to the point, the stack barrier at X is above
the goexit frame, so gentraceback never sees that stack barrier. At
the end of gentraceback, it checks that it saw all of the stack
barriers and panics because it didn't see the one at X.
The fix is simple: call goexit1, which actually implements the process
of exiting a goroutine, rather than goexit, the exit stub.
To make sure this doesn't happen again in the future, we also add an
argument to the stub prototype of goexit so you really, really have to
want to call it in order to call it. We were able to reliably
reproduce the above sequence with a fair amount of awful code inserted
at the right places in the runtime, but chose to change the goexit
prototype to ensure this wouldn't happen again rather than pollute the
runtime with ugly testing code.
Change-Id: Ifb6fb53087e09a252baddadc36eebf954468f2a8
Reviewed-on: https://go-review.googlesource.com/13323
Reviewed-by: Russ Cox <rsc@golang.org>
This makes TestTraceStressStartStop much less flaky.
Running under stress, it changes the failure rate from
above 1/100 to under 1/50000. That very unlikely
failure happens when an unexpected GoSysExit is
written. Not sure how that happens yet, but it is much
less important.
Fixes#11953.
Change-Id: I034671936334b4f3ab733614ef239aa121d20247
Reviewed-on: https://go-review.googlesource.com/13321
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
The old code was only allowing the chars we choose not to escape.
We sometimes prefer to escape chars that do not strictly need it.
Allowing those to be used in RawPath lets people override that
preference, which is in fact the whole point of RawPath (new in Go 1.5).
While we are here, also allow [ ] in RawPath.
This is not strictly spec-compliant, but it is what modern browers
do and what at least some people expect, and the [ ] do not cause
any ambiguity (the usual reason they would be escaped, as they are
part of the RFC gen-delims class).
The argument for allowing them now instead of waiting until Go 1.6
is that this way RawPath has one fixed meaning at the time it is
introduced, that we should not need to change or expand.
Fixes#5684.
Change-Id: If9c82a18f522d7ee1d10310a22821ada9286ee5c
Reviewed-on: https://go-review.googlesource.com/13258
Reviewed-by: Andrew Gerrand <adg@golang.org>
The code in question was added as part of allowing zone identifiers
in IPv6 literals like http://[ipv6%zone]:port/foo, in golang.org/cl/2431.
The old condition makes no sense. It refers to §3.2.1, which is the wrong section
of the RFC, it excludes all the sub-delims, which §3.2.2 (the right section)
makes clear are valid, and it allows ':', which is not actually valid,
without an explanation as to why (because we keep :port in the Host field
of the URL struct).
The new condition allows all the sub-delims, as specified in RFC 3986,
plus the additional characters [ ] : seen in IP address literals and :port suffixes,
which we also keep in the Host field.
This allows mysql://a,b,c/path to continue to parse, as it did in Go 1.4 and earlier.
This CL does not break any existing tests, suggesting the over-conservative
behavior was not intended and perhaps not realized.
It is especially important not to over-escape the host field, because
Go does not unescape the host field during parsing: it rejects any
host field containing % characters.
Fixes#12036.
Change-Id: Iccbe4985957b3dc58b6dfb5dcb5b63a51a6feefb
Reviewed-on: https://go-review.googlesource.com/13254
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Go 1.4 and earlier accepted mysql://x@y(z:123)/foo
and I don't see any compelling reason to break that.
The CL during Go 1.5 that broke this syntax was
trying to fix#11208 and was probably too aggressive.
I added a test case for #11208 to make sure that stays
fixed.
Relaxing the check did not re-break #11208 nor did
it cause any existing test to fail. I added a test for the
mysql://x@y(z:123)/foo syntax being preserved.
Fixes#12023.
Change-Id: I659d39f18c85111697732ad24b757169d69284fc
Reviewed-on: https://go-review.googlesource.com/13253
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Strengthening VerifyHostname exposed the fact that for resumed
connections, ConnectionState().VerifiedChains was not being saved
and restored during the ClientSessionCache operations.
Do that.
This change just saves the verified chains in the client's session
cache. It does not re-verify the certificates when resuming a
connection.
There are arguments both ways about this: we want fast, light-weight
resumption connections (thus suggesting that we shouldn't verify) but
it could also be a little surprising that, if the verification config
is changed, that would be ignored if the same session cache is used.
On the server side we do re-verify client-auth certificates, but the
situation is a little different there. The client session cache is an
object in memory that's reset each time the process restarts. But the
server's session cache is a conceptual object, held by the clients, so
can persist across server restarts. Thus the chance of a change in
verification config being surprisingly ignored is much higher in the
server case.
Fixes#12024.
Change-Id: I3081029623322ce3d9f4f3819659fdd9a381db16
Reviewed-on: https://go-review.googlesource.com/13164
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Prior to this change, broken trailers would be handled by body.Read, and
an error would be returned to its caller (likely a Handler), but that
error would go completely unnoticed by the rest of the server flow
allowing a broken connection to be reused. This is a possible request
smuggling vector.
Fixes#12027.
Change-Id: I077eb0b8dff35c5d5534ee5f6386127c9954bd58
Reviewed-on: https://go-review.googlesource.com/13148
Reviewed-by: Russ Cox <rsc@golang.org>
This change alters the certificate used in many tests so that it's no
longer self-signed. This allows some tests to exercise the standard
certificate verification paths in the future.
Change-Id: I9c3fcd6847eed8269ff3b86d9b6966406bf0642d
Reviewed-on: https://go-review.googlesource.com/13244
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
88e945f introduced a non-speculative double check of the heap trigger
before actually starting a concurrent GC. This was necessary to fix a
race for heap-triggered GC, but broke sysmon-triggered periodic GC,
since the heap check will of course fail for periodically triggered
GC.
Fix this by telling startGC whether or not this GC was triggered by
heap size or a timer and only doing the heap size double check for GCs
triggered by heap size.
Fixes#12026.
Change-Id: I7c3f6ec364545c36d619f2b4b3bf3b758e3bcbd6
Reviewed-on: https://go-review.googlesource.com/13168
Reviewed-by: Russ Cox <rsc@golang.org>
First step towards cleaning up the operator section - no language
changes. Specifically:
- Grouped arithmetic operations by types (integer, floating-point,
string), with corresponding h4 headings.
- Changed Operator precedence title from h3 to h4.
- Moved Integer Overflow section after integer operations and changed
its title from h3 to h4.
This puts things that belong together closer. No heading id's were
lost (in case of references from outside the spec).
Change-Id: I6b349ba8d86a6ae29b596beb297cc45c81e69399
Reviewed-on: https://go-review.googlesource.com/13143
Reviewed-by: Rob Pike <r@golang.org>
Missed in CL 13074.
Change-Id: Ic0600341abbc423cd8d7b2201bf50e3b0bf398a7
Reviewed-on: https://go-review.googlesource.com/13167
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Now that it works we need to turn it back on.
Fixes#10119.
Change-Id: I9c62d3026f7bb62c49a601ad73f33bf655372915
Reviewed-on: https://go-review.googlesource.com/13162
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It is just far too slow.
I have a CL for Go 1.6 that makes many of these into internal tests.
That will improve the coverage.
It does not matter much, because basically none of the go command
tests are architecture dependent, so the other builders will catch
any problems.
Fixes freebsd-arm builder.
Change-Id: I8b2f6ac2cc1e7657019f7731c6662dc43e20bfb5
Reviewed-on: https://go-review.googlesource.com/13166
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This works after golang.org/cl/13120 is running on the
coordinator (maybe it already is).
Change-Id: I4053d8e2f32fafd47b927203a6f66d5858e23376
Reviewed-on: https://go-review.googlesource.com/13165
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Tracing functionality was moved from runtime/pprof to runtime/trace.
Change-Id: I694e0f209d043c7ffecb113f1825175bf963dde3
Reviewed-on: https://go-review.googlesource.com/13074
Reviewed-by: Rob Pike <r@golang.org>
This is what is causing freebsd/arm to crash mysteriously when using cgo.
The bug was introduced in golang.org/cl/4030, which moved this code out
of rt0_go and into its own function. The ARM ABI says that calls must
be made with the stack pointer at an 8-byte boundary, but only FreeBSD
seems to crash when this is violated.
Fixes#10119.
Change-Id: Ibdbe76b2c7b80943ab66b8abbb38b47acb70b1e5
Reviewed-on: https://go-review.googlesource.com/13161
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
This change allows the download page to redirect the user to
/doc/install?download=filename so the user can see installation
instructions specific to the file they are downloading.
This change also expands the "Test your Go installation" section
to instruct the user to create a workspace, hopefully leading
to less confusion down the line.
It also changes the front page download link to go directly
to the downloads page, which will in turn take them to the
installation instructions (the original destination).
This is related to this change to the tools repo:
https://golang.org/cl/13180
Change-Id: I658327bdb93ad228fb1846e389b281b15da91b1d
Reviewed-on: https://go-review.googlesource.com/13151
Reviewed-by: Chris Broadfoot <cbro@golang.org>
When commit 510fd13 enabled assists during the scan phase, it failed
to also update the code in the GC controller that computed the assist
CPU utilization and adjusted the trigger based on it. Fix that code so
it uses the start of the scan phase as the wall-clock time when
assists were enabled rather than the start of the mark phase.
Change-Id: I05013734b4448c3e2c730dc7b0b5ee28c86ed8cf
Reviewed-on: https://go-review.googlesource.com/13048
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
At the start of a GC cycle, the garbage collector computes the assist
ratio based on the total scannable heap size. This was intended to be
conservative; after all, this assumes the entire heap may be reachable
and hence needs to be scanned. But it only assumes that the *current*
entire heap may be reachable. It fails to account for heap allocated
during the GC cycle. If the trigger ratio is very low (near zero), and
most of the heap is reachable when GC starts (which is likely if the
trigger ratio is near zero), then it's possible for the mutator to
create new, reachable heap fast enough that the assists won't keep up
based on the assist ratio computed at the beginning of the cycle. As a
result, the heap can grow beyond the heap goal (by hundreds of megs in
stress tests like in issue #11911).
We already have some vestigial logic for dealing with situations like
this; it just doesn't run often enough. Currently, every 10 ms during
the GC cycle, the GC revises the assist ratio. This was put in before
we switched to a conservative assist ratio (when we really were using
estimates of scannable heap), and it turns out to be exactly what we
need now. However, every 10 ms is far too infrequent for a rapidly
allocating mutator.
This commit reuses this logic, but replaces the 10 ms timer with
revising the assist ratio every time the heap is locked, which
coincides precisely with when the statistics used to compute the
assist ratio are updated.
Fixes#11911.
Change-Id: I377b231ab064946228378fa10422a46d1b50f4c5
Reviewed-on: https://go-review.googlesource.com/13047
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This was useful in debugging the mutator assist behavior for #11911,
and it fits with the other gcpacertrace output.
Change-Id: I1e25590bb4098223a160de796578bd11086309c7
Reviewed-on: https://go-review.googlesource.com/13046
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Proportional concurrent sweep is currently based on a ratio of spans
to be swept per bytes of object allocation. However, proportional
sweeping is performed during span allocation, not object allocation,
in order to minimize contention and overhead. Since objects are
allocated from spans after those spans are allocated, the system tends
to operate in debt, which means when the next GC cycle starts, there
is often sweep debt remaining, so GC has to finish the sweep, which
delays the start of the cycle and delays enabling mutator assists.
For example, it's quite likely that many Ps will simultaneously refill
their span caches immediately after a GC cycle (because GC flushes the
span caches), but at this point, there has been very little object
allocation since the end of GC, so very little sweeping is done. The
Ps then allocate objects from these cached spans, which drives up the
bytes of object allocation, but since these allocations are coming
from cached spans, nothing considers whether more sweeping has to
happen. If the sweep ratio is high enough (which can happen if the
next GC trigger is very close to the retained heap size), this can
easily represent a sweep debt of thousands of pages.
Fix this by making proportional sweep proportional to the number of
bytes of spans allocated, rather than the number of bytes of objects
allocated. Prior to allocating a span, both the small object path and
the large object path ensure credit for allocating that span, so the
system operates in the black, rather than in the red.
Combined with the previous commit, this should eliminate all sweeping
from GC start up. On the stress test in issue #11911, this reduces the
time spent sweeping during GC (and delaying start up) by several
orders of magnitude:
mean 99%ile max
pre fix 1 ms 11 ms 144 ms
post fix 270 ns 735 ns 916 ns
Updates #11911.
Change-Id: I89223712883954c9d6ec2a7a51ecb97172097df3
Reviewed-on: https://go-review.googlesource.com/13044
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Currently it's possible for the next_gc heap size trigger computed for
the next GC cycle to be less than the current allocated heap size.
This means the next cycle will start immediately, which means there's
no time to perform the concurrent sweep between GC cycles. This places
responsibility for finishing the sweep on GC itself, which delays GC
start-up and hence delays mutator assist.
Fix this by ensuring that next_gc is always at least a little higher
than the allocated heap size, so we won't trigger the next cycle
instantly.
Updates #11911.
Change-Id: I74f0b887bf187518d5fedffc7989817cbcf30592
Reviewed-on: https://go-review.googlesource.com/13043
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Currently there are two sensitive periods during which a mutator can
allocate past the heap goal but mutator assists can't be enabled: 1)
at the beginning of GC between when the heap first passes the heap
trigger and sweep termination and 2) at the end of GC between mark
termination and when the background GC goroutine parks. During these
periods there's no back-pressure or safety net, so a rapidly
allocating mutator can allocate past the heap goal. This is
exacerbated if there are many goroutines because the GC coordinator is
scheduled as any other goroutine, so if it gets preempted during one
of these periods, it may stay preempted for a long period (10s or 100s
of milliseconds).
Normally the mutator does scan work to create back-pressure against
allocation, but there is no scan work during these periods. Hence, as
a fall back, if a mutator would assist but can't yet, simply yield the
CPU. This delays the mutator somewhat, but more importantly gives more
CPU time to the GC coordinator for it to complete the transition.
This is obviously a workaround. Issue #11970 suggests a far better but
far more invasive way to fix this.
Updates #11911. (This very nearly fixes the issue, but about once
every 15 minutes I get a GC cycle where the assists are enabled but
don't do enough work.)
Change-Id: I9768b79e3778abd3e06d306596c3bd77f65bf3f1
Reviewed-on: https://go-review.googlesource.com/13026
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently allocation checks the GC trigger speculatively during
allocation and then triggers the GC without rechecking. As a result,
it's possible for G 1 and G 2 to detect the trigger simultaneously,
both enter startGC, G 1 actually starts GC while G 2 gets preempted
until after the whole GC cycle, then G 2 immediately starts another GC
cycle even though the heap is now well under the trigger.
Fix this by re-checking the GC trigger non-speculatively just before
actually kicking off a new GC cycle.
This contributes to #11911 because when this happens, we definitely
don't finish the background sweep before starting the next GC cycle,
which can significantly delay the start of concurrent scan.
Change-Id: I560ab79ba5684ba435084410a9765d28f5745976
Reviewed-on: https://go-review.googlesource.com/13025
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Do not assume that if stat shows multiple links that we should mark the
file as a hardlink in the tar format. If the hardlink link was not
referenced, this caused a link to "/". On an overlay file system, all
files have multiple links.
The caller must keep the inode references and set TypeLink, Size = 0,
and LinkName themselves.
Change-Id: I873b8a235bc8f8fbb271db74ee54232da36ca013
Reviewed-on: https://go-review.googlesource.com/13045
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The buildmode docs mention exported functions, but don't say anything
about how to export them. Mention the cgo tool to make this somewhat
clearer.
Fixes#11955.
Change-Id: Ie5420445daa87f5aceec6ad743465d5d32d0a786
Reviewed-on: https://go-review.googlesource.com/13080
Reviewed-by: Russ Cox <rsc@golang.org>
