For #44513.
For #23011.
Change-Id: Ic092e38da3601a43d7e2110f500db4a6a6f845f5
Reviewed-on: https://go-review.googlesource.com/c/go/+/316889
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
We were already setting GIT_SSH_COMMAND (if unset) to explicitly
include 'ControlMaster=no' in order to disable connection pooling.
Now we also set 'BatchMode=yes' to suppress password prompts for
password-protected keys.
While we're here, we also set GCM_INTERACTIVE=never to suppress
similar prompts from the Git Credential Manager for Windows.
Fixes#44904
Change-Id: Iebb050079ff7dd54d5b944c459ae212e9e6f2579
Reviewed-on: https://go-review.googlesource.com/c/go/+/300157
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Previously calling fmt.Sprintf("%#v", t) on a time.Time value would
yield a result like:
time.Time{wall:0x0, ext:63724924180, loc:(*time.Location)(nil)}
which does not compile when embedded in a Go program, and does not
tell you what value is represented at a glance.
This change adds a GoString method that returns much more legible
output:
"time.Date(2009, time.February, 5, 5, 0, 57, 12345600, time.UTC)"
which gives you more information about the time.Time and also can be
usefully embedded in a Go program without additional work.
Update Quote() to hex escape non-ASCII characters (copying logic
from strconv), which makes it safer to embed them in the output of
GoString().
Fixes#39034.
Change-Id: Ic985bafe4e556f64e82223c643f65143c9a45c3b
Reviewed-on: https://go-review.googlesource.com/c/go/+/267017
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
In order to prevent edit wars with previous cmd/go releases,
the new version annotations are only included if the main module
specifies 'go 1.17' or higher.
Fixes#36876
Change-Id: Iba15e47dd1ac2c16d754679a9b501db4069fa250
Reviewed-on: https://go-review.googlesource.com/c/go/+/315409
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This change adds two possible upgrade paths for lazy loading:
1. Run 'go mod tidy -go=1.17'.
2. Starting in a module with no existing 'go' directive,
run any 'go' command that updates the go.mod file.
In the latter case, commands other than 'go mod tidy'
may leave the go.mod file *very* untidy if it had non-trivial
dependencies. (The 'go' invocation will promote all
implicit eager dependencies to explicit lazy ones,
which preserves the original module graph — most of which is
not actually relevant.)
'go mod tidy -go=1.17' can be used to enable lazy loading without
accidentally downgrading existing transitive dependencies.
'go mod tidy -go=1.16' can be used to disable lazy loading and clear
away redundant roots in a single step (if reducing the go version), or
to prune away dependencies of tests-of-external-tests (if increasing
the go version).
'go mod tidy -go=1.15' can be used to add dependencies of
tests-of-external-tests, although there isn't much point to that.
DO NOT MERGE
This change still needs an explicit test and a release note.
Fixes#45094
For #36460
Change-Id: I68f057e39489dfd6a667cd11dc1e320c1ee1aec1
Reviewed-on: https://go-review.googlesource.com/c/go/+/315210
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This change activates the dormant “lazy loading” codepaths added in CL
265777 and its predecessors. Dependencies of modules that declare 'go
1.17' or higher are loaded lazily, and the dependencies in the go.mod
file maintain additional invariants to support more efficient lazy
loading for downstream dependent modules.
See https://golang.org/design/36460-lazy-module-loading for the
detailed design.
For #36460
Change-Id: Ic12ee7842aef9580357fcf8909d87654fcb2ad12
Reviewed-on: https://go-review.googlesource.com/c/go/+/314634
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
1. The existing prose implied that a switch expression type must
be comparable because it is tested for equality against all case
expressions. But for an empty switch (no case expressions), it
was not clear if the switch expression needed to be comparable.
Require it to match the behavior of compiler and type checkers.
2. While making this change, remove redundant language explaining
what happens with untyped boolean switch expression values: the
default type of an untyped boolean value is bool, this is already
covered by the first part of the relevant sentence.
Fixes#43200.
Change-Id: Id8e0f29cfa8722b57cd2b7b58cba85b58c5f842b
Reviewed-on: https://go-review.googlesource.com/c/go/+/314411
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Rob Pike <r@golang.org>
A non-trivial Cgo program may need to use callbacks and interact with
go objects per goroutine. Because of the rules for passing pointers
between Go and C, such a program needs to store handles to associated
Go values. This often causes much extra effort to figure out a way to
correctly deal with: 1) map collision; 2) identifying leaks and 3)
concurrency.
This CL implements a Handle representation in runtime/cgo package, and
related methods such as Value, Delete, etc. which allows Go users can
use a standard way to handle the above difficulties.
In addition, the CL allows a Go value to have multiple handles, and the
NewHandle always returns a different handle compare to the previously
returned handles. In comparison, CL 294670 implements a different
behavior of NewHandle that returns a unique handle when the Go value is
referring to the same object.
Benchmark:
name time/op
Handle/non-concurrent-16 487ns ± 1%
Handle/concurrent-16 674ns ± 1%
Fixes#37033
Change-Id: I0eadb9d44332fffef8fb567c745246a49dd6d4c1
Reviewed-on: https://go-review.googlesource.com/c/go/+/295369
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Cherry Zhang <cherryyz@google.com>
Then, write the 'go.mod' file with that version before further
processing. That way, if the command errors out due to a change in
behavior, the reason for the change in behavior will be visible in the
file diffs.
If the 'go.mod' file cannot be written (due to -mod=readonly or
-mod=vendor), assume Go 1.11 instead of the current Go release.
(cmd/go has added 'go' directives automatically, including in 'go mod
init', since Go 1.12.)
For #44976
Change-Id: If9d4af557366f134f40ce4c5638688ba3bab8380
Reviewed-on: https://go-review.googlesource.com/c/go/+/302051
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
In Go1.13 and above, signed integers are permitted as shift counts as long as they are >=0.
However, the comments in the "Arithmetic operators" section says shift operators accept "unsigned integer" as of right operands. Replacing this with "integer>=0" resolves the misunderstanding that shift
operators permit only unsigned integers.
Reference: Go1.13 Release Notes: https://golang.org/doc/go1.13
Change-Id: Icd3c7734d539ab702590e992a618c9251c653c37
GitHub-Last-Rev: 4f263a48d3
GitHub-Pull-Request: golang/go#44664
Reviewed-on: https://go-review.googlesource.com/c/go/+/297249
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Trust: Robert Griesemer <gri@golang.org>
Adds the (*tls.Conn).HandshakeContext method. This allows
us to pass the context provided down the call stack to
eventually reach the tls.ClientHelloInfo and
tls.CertificateRequestInfo structs.
These contexts are exposed to the user as read-only via Context()
methods.
This allows users of (*tls.Config).GetCertificate and
(*tls.Config).GetClientCertificate to use the context for
request scoped parameters and cancellation.
Replace uses of (*tls.Conn).Handshake with (*tls.Conn).HandshakeContext
where appropriate, to propagate existing contexts.
Fixes#32406
Change-Id: I259939c744bdc9b805bf51a845a8bc462c042483
Reviewed-on: https://go-review.googlesource.com/c/go/+/295370
Run-TryBot: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Katie Hockman <katie@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Change-Id: I453d06da2f596eb0b99905aec46a05547d73c62c
Reviewed-on: https://go-review.googlesource.com/c/go/+/290872
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Trust: Robert Griesemer <gri@golang.org>
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This template is based on CL 248198 and previous ones like it.
Continue to eagerly include often-used sections, and clarify that
the TODO is about completing the section, or removing if it turns
out not to be needed.
Move the Go 1.16 release notes to x/website, since that's the new
home for past Go release notes as of CL 291711. They're added to
x/website in CL 295249.
'relnote -html' does not report any CLs with RELNOTE annotations
since 2021/02/01.
For #44513.
Updates #40700.
Change-Id: Idd389335500ec4dec2764cbbaa385918cc8a79ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/295209
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Updates #40700
Change-Id: Ifff622ccadaa31c0c0684c3c695aadcaa2305623
Reviewed-on: https://go-review.googlesource.com/c/go/+/294669
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The spec states that a type "may" have a method set associated with it.
Yet every type has a method set, which may be empty. This is clarified
later in the same paragraph. Be clear in the first sentence as well.
Per the suggestion from https://github.com/DQNEO.
Fixes#44318.
Change-Id: I6097b1c7062853e404b7fead56d18a7f9c576fc3
Reviewed-on: https://go-review.googlesource.com/c/go/+/292853
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#40700.
Change-Id: I99ed479d1bb3cdf469c0209720c728276182a7a9
Reviewed-on: https://go-review.googlesource.com/c/go/+/291809
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Trust: Alexander Rakoczy <alex@golang.org>
Run-TryBot: Alexander Rakoczy <alex@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
They have moved to x/website in CL 291693.
The docs that are left are the ones that are edited at the same time
as development in this repository and are tied to the specific version
of Go being developed. Those are:
- the language spec
- the memory model
- the assembler manual
- the current release's release notes
Change-Id: I437c4d33ada1b1716b1919c3c939c2cacf407e83
Reviewed-on: https://go-review.googlesource.com/c/go/+/291711
Trust: Russ Cox <rsc@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
These live in x/website/content/doc now.
The copies here just attract edits that have no actual effect.
For #40496.
For #41861.
Change-Id: I2fdd7375e373949eb9a88f4cdca440b6a5d45eea
Reviewed-on: https://go-review.googlesource.com/c/go/+/291709
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
For #43985
Change-Id: I1a16f66800c5c648703f0a0d2ad75024525a710f
Reviewed-on: https://go-review.googlesource.com/c/go/+/291389
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
A caller is not always in a function.
For example, a call can appear in top level declarations.
e.g. var x = f()
Change-Id: I29c4c3b7663249434fb2b8a6d0003267c77268cf
Reviewed-on: https://go-review.googlesource.com/c/go/+/290849
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Robert Griesemer <gri@golang.org>
This vet check was added in CL 243397.
For #40700.
Change-Id: Ibff6df9395d37bb2b84a791443578009f23af4fb
GitHub-Last-Rev: e47c38f630
GitHub-Pull-Request: golang/go#44147
Reviewed-on: https://go-review.googlesource.com/c/go/+/290330
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Add missed heading tag in CL 276373.
For #40700
Change-Id: Ida9e8861589bbc296a5a1cecbf9fe33fa09ed0ca
GitHub-Last-Rev: d218f8d4b7
GitHub-Pull-Request: golang/go#44111
Reviewed-on: https://go-review.googlesource.com/c/go/+/289869
Reviewed-by: Tim King <taking@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Trust: Tim King <taking@google.com>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
The example, var v, ok T1 = x.(T), can be interpreted as type T1 interface{} or type T = bool; type T1 = T.
Separating the example would help understanding for readers.
Change-Id: I179f4564e67f4d503815d29307df2cebb50c82f9
GitHub-Last-Rev: b34fffb6bb
GitHub-Pull-Request: golang/go#44040
Reviewed-on: https://go-review.googlesource.com/c/go/+/288472
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Robert Griesemer <gri@golang.org>
For #40700
For #41184Fixes#43957
Change-Id: Ia346f4cf160431b721efeba7dc5f1fb8814efd95
Reviewed-on: https://go-review.googlesource.com/c/go/+/287472
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
A parenthesis of go list "-f" flag format is double curly braces.
Change-Id: Ifd38e0b0ae3c46272a4acd65584818228168b7c6
GitHub-Last-Rev: b46030492b
GitHub-Pull-Request: golang/go#43924
Reviewed-on: https://go-review.googlesource.com/c/go/+/286752
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Currently the only mention of go_asm.h is buried in a confusing
section about the runtime-specific go_tls.h header. We actually want
people to use go_asm.h, so this CL adds a section with a proper
discussion of this header. As part of this, we remove the discussion
of go_asm.h from the go_tls.h section and clean up what remains.
I stumbled on this when working on the internal ABI specification. I
wanted to refer to stable documentation on how to access struct fields
from assembly and found there was none.
Change-Id: I0d53741e7685e65794611939e76285f7c82e1d65
Reviewed-on: https://go-review.googlesource.com/c/go/+/286052
Trust: Austin Clements <austin@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
