Alpine has a known issue where setgid clobbers the Go stack (#39857).
misc/cgo/test skips other tests that use setgid on Alpine, but not
this one. It's not clear to me why this test *used to* pass, but when
I refactored misc/cgo/test in CL 447355 it started failing.
Disable this test on Alpine, like the other setgid tests.
Change-Id: I2e646ef55e2201a4f0b377319d719a011ec847f0
Reviewed-on: https://go-review.googlesource.com/c/go/+/448355
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
When we were first introducing module mode, CL 163418 moved many of
the tests in misc/cgo/test into their own test binary under testdata
so misc/cgo/test continued to work in both GOPATH mode and module
mode. This introduce a somewhat complicated test driver into
misc/cgo/test. Since the misc/cgo/test test had to invoke "go test" as
a subprocess, this required care to thread any build flags down into
the subprocess. The output from any failures of the sub-process was
also less than ideal.
Now that we don't have to worry about running these in GOPATH mode any
more, this CL moves all of the tests back into misc/cgo/test and drops
the test driver.
There are two slight complications:
- Test41761 was added after this split and has a C type "S" that's
also present in misc/cgo/test itself. We rename that to keep that
test working.
- TestCgo in go/internal/srcimporter now fails to import misc/cgo/test
because misc/cgo/test now contains imports of other "misc" module
packages and the importer it sets up isn't configured to allow that.
We fix this by setting up a build context that's configured for
this.
Preparation for #37486.
Change-Id: I3c4f73540e0482bbd493823cca44b0ce7fac01f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/447355
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
We don't have a good musl detection mechanism, so we detect Alpine (the
most common user of musl) instead.
For #39857.
For #19938.
Change-Id: I2fa39248682aed75884476374fe2212be4427347
Reviewed-on: https://go-review.googlesource.com/c/go/+/425001
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
When we create a thread with signals blocked. But glibc's
pthread_sigmask doesn't really allow us to block SIGSETXID. So we
may get a signal early on before the signal stack is set. If we
get a signal on the current stack, it will clobber anything below
the SP. This CL makes it to save LR and decrement SP in a single
MOVD.W instruction for small frames, so we don't write below the
SP.
We used to use a single MOVD.W instruction before CL 379075.
CL 379075 changed to use an STP instruction to save the LR and FP,
then decrementing the SP. This CL changes it back, just this part
(epilogues and large frame prologues are unchanged). For small
frames, it is the same number of instructions either way.
This decreases the size of a "small" frame from 0x1f0 to 0xf0.
For frame sizes in between, it could benefit from using an
STP instruction instead of using the prologue for the "large"
frame case. We don't bother it for now as this is a stop-gap
solution anyway.
This only addresses the issue with small frames. Luckily, all
functions from thread entry to setting up the signal stack have
samll frames.
Other possible ideas:
- Expand the unwind info metadata, separate SP delta and the
location of the return address, so we can express "SP is
decremented but the return address is in the LR register". Then
we can always create the frame first then write the LR, without
writing anything below the SP (except the frame pointer at SP-8,
which is minor because it doesn't really affect program
execution).
- Set up the signal stack immediately in mstart in assembly.
For Go 1.19 we do this simple fix. We plan to do the metadata fix
in Go 1.20 ( #53609 ).
Other LR architectures are addressed in CL 413428.
Fix#53374.
Change-Id: I9d6582ab14ccb06ac61ad43852943d9555e22ae5
Reviewed-on: https://go-review.googlesource.com/c/go/+/412474
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Eric Fang <eric.fang@arm.com>
This change adds two new methods for invoking system calls
under Linux: syscall.AllThreadsSyscall() and
syscall.AllThreadsSyscall6().
These system call wrappers ensure that all OSThreads mirror
a common system call. The wrappers serialize execution of the
runtime to ensure no race conditions where any Go code observes
a non-atomic OS state change. As such, the syscalls have
higher runtime overhead than regular system calls, and only
need to be used where such thread (or 'm' in the parlance
of the runtime sources) consistency is required.
The new support is used to enable these functions under Linux:
syscall.Setegid(), syscall.Seteuid(), syscall.Setgroups(),
syscall.Setgid(), syscall.Setregid(), syscall.Setreuid(),
syscall.Setresgid(), syscall.Setresuid() and syscall.Setuid().
They work identically to their glibc counterparts.
Extensive discussion of the background issue addressed in this
patch can be found here:
https://github.com/golang/go/issues/1435
In the case where cgo is used, the C runtime can launch pthreads that
are not managed by the Go runtime. As such, the added
syscall.AllThreadsSyscall*() return ENOTSUP when cgo is enabled.
However, for the 9 syscall.Set*() functions listed above, when cgo is
active, these functions redirect to invoke their C.set*() equivalents
in glibc, which wraps the raw system calls with a nptl:setxid fixup
mechanism. This achieves POSIX semantics for these functions in the
combined Go and C runtime.
As a side note, the glibc/nptl:setxid support (2019-11-30) does not
extend to all security related system calls under Linux so using
native Go (CGO_ENABLED=0) and these AllThreadsSyscall*()s, where
needed, will yield more well defined/consistent behavior over all
threads of a Go program. That is, using the
syscall.AllThreadsSyscall*() wrappers for things like setting state
through SYS_PRCTL and SYS_CAPSET etc.
Fixes#1435
Change-Id: Ib1a3e16b9180f64223196a32fc0f9dce14d9105c
Reviewed-on: https://go-review.googlesource.com/c/go/+/210639
Trust: Emmanuel Odeke <emm.odeke@gmail.com>
Trust: Ian Lance Taylor <iant@golang.org>
Trust: Michael Pratt <mpratt@google.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Austin Clements <austin@google.com>
This change preserves the ability to test misc/cgo/test in GOPATH
mode, at the cost of indirection through a 'go test' subprocess.
Updates #30228
Change-Id: I08de855e62278d30fa622b2f7478e43dd2ab0e96
Reviewed-on: https://go-review.googlesource.com/c/163418
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
https://golang.org/cl/10173 intrduced msigsave, ensureSigM and
_SigUnblock but didn't enable the new signal save/restore mechanism for
SIG{HUP,INT,QUIT,ABRT,TERM} on DragonFly BSD, FreeBSD and OpenBSD.
At present, it looks like they have the implementation. This change
enables the new mechanism on DragonFly BSD, FreeBSD and OpenBSD the same
as Darwin, NetBSD.
Change-Id: Ifb4b4743b3b4f50bfcdc7cf1fe1b59c377fa2a41
Reviewed-on: https://go-review.googlesource.com/18657
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Ian proposed an improved way of handling signals masks in Go, motivated
by a problem where the Android java runtime expects certain signals to
be blocked for all JVM threads. Discussion here
https://groups.google.com/forum/#!topic/golang-dev/_TSCkQHJt6g
Ian's text is used in the following:
A Go program always needs to have the synchronous signals enabled.
These are the signals for which _SigPanic is set in sigtable, namely
SIGSEGV, SIGBUS, SIGFPE.
A Go program that uses the os/signal package, and calls signal.Notify,
needs to have at least one thread which is not blocking that signal,
but it doesn't matter much which one.
Unix programs do not change signal mask across execve. They inherit
signal masks across fork. The shell uses this fact to some extent;
for example, the job control signals (SIGTTIN, SIGTTOU, SIGTSTP) are
blocked for commands run due to backquote quoting or $().
Our current position on signal masks was not thought out. We wandered
into step by step, e.g., http://golang.org/cl/7323067 .
This CL does the following:
Introduce a new platform hook, msigsave, that saves the signal mask of
the current thread to m.sigsave.
Call msigsave from needm and newm.
In minit grab set up the signal mask from m.sigsave and unblock the
essential synchronous signals, and SIGILL, SIGTRAP, SIGPROF, SIGSTKFLT
(for systems that have it).
In unminit, restore the signal mask from m.sigsave.
The first time that os/signal.Notify is called, start a new thread whose
only purpose is to update its signal mask to make sure signals for
signal.Notify are unblocked on at least one thread.
The effect on Go programs will be that if they are invoked with some
non-synchronous signals blocked, those signals will normally be
ignored. Previously, those signals would mostly be ignored. A change
in behaviour will occur for programs started with any of these signals
blocked, if they receive the signal: SIGHUP, SIGINT, SIGQUIT, SIGABRT,
SIGTERM. Previously those signals would always cause a crash (unless
using the os/signal package); with this change, they will be ignored
if the program is started with the signal blocked (and does not use
the os/signal package).
./all.bash completes successfully on linux/amd64.
OpenBSD is missing the implementation.
Change-Id: I188098ba7eb85eae4c14861269cc466f2aa40e8c
Reviewed-on: https://go-review.googlesource.com/10173
Reviewed-by: Ian Lance Taylor <iant@golang.org>
These signals are used by glibc to broadcast setuid/setgid to all
threads and to send pthread cancellations. Unlike other signals, the
Go runtime does not intercept these because they must invoke the libc
handlers (see issues #3871 and #6997). However, because 1) these
signals may be issued asynchronously by a thread running C code to
another thread running Go code and 2) glibc does not set SA_ONSTACK
for its handlers, glibc's signal handler may be run on a Go stack.
Signal frames range from 1.5K on amd64 to many kilobytes on ppc64, so
this may overflow the Go stack and corrupt heap (or other stack) data.
Fix this by ensuring that these signal handlers have the SA_ONSTACK
flag (but not otherwise taking over the handler).
This has been a problem since Go 1.1, but it's likely that people
haven't encountered it because it only affects setuid/setgid and
pthread_cancel.
Fixes#9600.
Change-Id: I6cf5f5c2d3aa48998d632f61f1ddc2778dcfd300
Reviewed-on: https://go-review.googlesource.com/1887
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Some systems, like Ubuntu, pass --build-id when linking. The
effect is to put a note in the output file. This is not
useful when generating an object file with the -r option, as
it eventually causes multiple build ID notes in the final
executable, all but one of which are for tiny portions of the
file and are therefore useless.
Disable that by passing an explicit --build-id=none when
linking with -r on systems that might do this.
LGTM=bradfitz
R=golang-codereviews, bradfitz
CC=golang-codereviews
https://golang.org/cl/119460043
NPTL uses SIGRTMIN (signal 32) to effect thread cancellation.
Go's runtime replaces NPTL's signal handler with its own, and
ends up aborting if a C library that ends up calling
pthread_cancel is used.
This patch prevents runtime from replacing NPTL's handler.
Fixes#6997.
R=golang-codereviews, iant, dvyukov
CC=golang-codereviews
https://golang.org/cl/47540043
