This patch reworks how inlheur.AnalyzeFunc is called by the top level
inliner. Up until this point the strategy was to analyze a function at
the point where CanInline is invoked on it, however it simplifies
things to instead make the call outside of CanInline (for example, so
that directly recursive functions can be analyzed).
Also as part of this patch, change things so that we no longer run
some of the more compile-time intensive analysis on functions that
haven't been marked inlinable (so as to safe compile time), and add a
teardown/cleanup hook in the inlheur package to be invoked by the
inliner when we're done inlining.
Change-Id: Id0772a285d891b0bed66dd86adaffa69d973c26a
Reviewed-on: https://go-review.googlesource.com/c/go/+/539318
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This test erroneously assumes that there will always be at least one
live object accounted for in a MemProfileRecord. This is not true; all
memory allocated from a particular location could be dead.
Fixes#64153.
Change-Id: Iadb783ea9b247823439ddc74b62a4c8b2ce8e33e
Reviewed-on: https://go-review.googlesource.com/c/go/+/542736
Reviewed-by: Cherry Mui <cherryyz@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Generate the CC version of many opcodes whose result is compared against
signed 0. The approach taken here works even if the opcode result is used in
multiple places too.
Add support for ADD, ADDconst, ANDN, SUB, NEG, CNTLZD, NOR conversions
to their CC opcode variant. These are the most commonly used variants.
Also, do not set clobberFlags of CNTLZD and CNTLZW, they do not clobber
flags.
This results in about 1% smaller text sections in kubernetes binaries,
and no regressions in the crypto benchmarks.
Change-Id: I9e0381944869c3774106bf348dead5ecb96dffda
Reviewed-on: https://go-review.googlesource.com/c/go/+/538636
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Jayanth Krishnamurthy <jayanth.krishnamurthy@ibm.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
This optab matching rule was used to match signed 16 bit values shifted
left by 16 bits. Unsigned 16 bit values greater than 0x7FFF<<16 were
classified as C_U32CON which led to larger than necessary codegen.
Instead, rewrite logical/arithmetic operations in the preprocessor pass
to use the 16 bit shifted immediate operation (e.g ADDIS vs ADD). This
simplifies the optab matching rules, while also minimizing codegen size
for large unsigned values.
Note, ADDIS sign-extends the constant argument, all others do not.
For matching opcodes, this means:
MOVD $is<<16,Rx becomes ADDIS $is,Rx or ORIS $is,Rx
MOVW $is<<16,Rx becomes ADDIS $is,Rx
ADD $is<<16,[Rx,]Ry becomes ADDIS $is[Rx,]Ry
OR $is<<16,[Rx,]Ry becomes ORIS $is[Rx,]Ry
XOR $is<<16,[Rx,]Ry becomes XORIS $is[Rx,]Ry
Change-Id: I1a988d9f52517a04bb8dc2e41d7caf3d5fff867c
Reviewed-on: https://go-review.googlesource.com/c/go/+/536735
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Range over integer is enabled now without the GOEXPERIMENT. The
GOEXPERIMENT is only for range over func. Rename it to rangefunc.
For #61405.
Change-Id: I9405fb8e2e30827875716786823856090a1a0cad
Reviewed-on: https://go-review.googlesource.com/c/go/+/539277
Reviewed-by: Russ Cox <rsc@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Fix#63955
parseIndVar, prove and maybe more are on the assumption that the loop header
is a single block. This can be wrong, ensure we don't match theses cases we
don't know how to handle.
In the future we could update them so that they know how to handle such cases
but theses cases seems rare so I don't think the value would be really high.
We could also run a loop canonicalization pass first which could handle this.
The repro case looks weird because I massaged it so it would crash with the
previous compiler.
Change-Id: I4aa8afae9e90a17fa1085832250fc1139c97faa6
Reviewed-on: https://go-review.googlesource.com/c/go/+/539977
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Move the range-over-function tests into range4.go.
Change-Id: Idccf30a0c7d7e8d2a17fb1c5561cf21e00506135
Reviewed-on: https://go-review.googlesource.com/c/go/+/539095
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Have nil checks return a pointer that is known non-nil. Users of
that pointer can use the result, ensuring that they are ordered
after the nil check itself.
The order dependence goes away after scheduling, when we've fixed
an order. At that point we move uses back to the original pointer
so it doesn't change regalloc any.
This prevents pointer arithmetic on nil from being spilled to the
stack and then observed by a stack scan.
Fixes#63657
Change-Id: I1a5fa4f2e6d9000d672792b4f90dfc1b7b67f6ea
Reviewed-on: https://go-review.googlesource.com/c/go/+/537775
Reviewed-by: David Chase <drchase@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Keith Randall <khr@google.com>
The compiler is currently sign extending 32 bit signed integers to
64 bits before right shifting them using a 64 bit shift instruction.
There's no need to do this as RISC-V has instructions for right
shifting 32 bit signed values (sraw and sraiw) which sign extend
the result of the shift to 64 bits. Change the compiler so that
it uses sraw and sraiw for shifts of signed 32 bit integers reducing
in most cases the number of instructions needed to perform the shift.
Here are some examples of code sequences that are changed by this
patch:
int32(a) >> 2
before:
sll x5,x10,0x20
sra x10,x5,0x22
after:
sraw x10,x10,0x2
int32(v) >> int(s)
before:
sext.w x5,x10
sltiu x6,x11,64
add x6,x6,-1
or x6,x11,x6
sra x10,x5,x6
after:
sltiu x5,x11,32
add x5,x5,-1
or x5,x11,x5
sraw x10,x10,x5
int32(v) >> (int(s) & 31)
before:
sext.w x5,x10
and x6,x11,63
sra x10,x5,x6
after:
and x5,x11,31
sraw x10,x10,x5
int32(100) >> int(a)
before:
bltz x10,<target address calls runtime.panicshift>
sltiu x5,x10,64
add x5,x5,-1
or x5,x10,x5
li x6,100
sra x10,x6,x5
after:
bltz x10,<target address calls runtime.panicshift>
sltiu x5,x10,32
add x5,x5,-1
or x5,x10,x5
li x6,100
sraw x10,x6,x5
int32(v) >> (int(s) & 63)
before:
sext.w x5,x10
and x6,x11,63
sra x10,x5,x6
after:
and x5,x11,63
sltiu x6,x5,32
add x6,x6,-1
or x5,x5,x6
sraw x10,x10,x5
In most cases we eliminate one instruction. In the case where
we shift a int32 constant by a variable the number of instructions
generated is identical. A sra is simply replaced by a sraw. In the
unusual case where we shift right by a variable anded with a constant
> 31 but < 64, we generate two additional instructions. As this is
an unusual case we do not try to optimize for it.
Some improvements can be seen in some of the existing benchmarks,
notably in the utf8 package which performs right shifts of runes
which are signed 32 bit integers.
| utf8-old | utf8-new |
| sec/op | sec/op vs base |
EncodeASCIIRune-4 17.68n ± 0% 17.67n ± 0% ~ (p=0.312 n=10)
EncodeJapaneseRune-4 35.34n ± 0% 34.53n ± 1% -2.31% (p=0.000 n=10)
AppendASCIIRune-4 3.213n ± 0% 3.213n ± 0% ~ (p=0.318 n=10)
AppendJapaneseRune-4 36.14n ± 0% 35.35n ± 0% -2.19% (p=0.000 n=10)
DecodeASCIIRune-4 28.11n ± 0% 27.36n ± 0% -2.69% (p=0.000 n=10)
DecodeJapaneseRune-4 38.55n ± 0% 38.58n ± 0% ~ (p=0.612 n=10)
Change-Id: I60a91cbede9ce65597571c7b7dd9943eeb8d3cc2
Reviewed-on: https://go-review.googlesource.com/c/go/+/535115
Run-TryBot: Joel Sing <joel@sing.id.au>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: M Zhuo <mzh@golangcn.org>
Reviewed-by: David Chase <drchase@google.com>
I will shortly be sending CLs to let the gofrontend code pass
these tests.
Change-Id: I53ccbdac3ac224a4fdc9577270f48136ca73a62c
Reviewed-on: https://go-review.googlesource.com/c/go/+/536537
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Most of the test cases in the test directory use the new go:build syntax
already. Convert the rest. In general, try to place the build constraint
line below the test directive comment in more places.
For #41184.
For #60268.
Change-Id: I11c41a0642a8a26dc2eda1406da908645bbc005b
Cq-Include-Trybots: luci.golang.try:gotip-linux-386-longtest,gotip-linux-amd64-longtest,gotip-windows-amd64-longtest
Reviewed-on: https://go-review.googlesource.com/c/go/+/536236
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Commit 061d77cb70 was published in parallel with another commit
36ecff0893 which changed how certain constants were generated.
Update the test to account for the changes.
Change-Id: I314b735a34857efa02392b7a0dd9fd634e4ee428
Reviewed-on: https://go-review.googlesource.com/c/go/+/536256
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Auto-Submit: Paul Murphy <murp@ibm.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
This is only supported power10/linux/PPC64. This generates smaller,
faster code by merging a pli + add into paddi.
Change-Id: I1f4d522fce53aea4c072713cc119a9e0d7065acc
Reviewed-on: https://go-review.googlesource.com/c/go/+/531717
Run-TryBot: Paul Murphy <murp@ibm.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
The funcdata is encoded as varint, with the upper limit set to 1e9.
However, the stack offsets could be up to 1<<30. Thus emitOpenDeferInfo
will trigger an ICE for function with large frame size.
By using binary.PutUvarint, the frame offset could be encoded correctly
for value larger than 1<<35, allow the compiler to report the error.
Further, the runtime also do validation when reading in the funcdata
value, so a bad offset won't likely cause mis-behavior.
Fixes#52697
Change-Id: I084c243c5d24c5d31cc22d5b439f0889e42b107c
Reviewed-on: https://go-review.googlesource.com/c/go/+/535077
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
In the PPC64 ISA, the instruction to do an 'and' operation
using an immediate constant is only available in the form that
also sets CR0 (i.e. clobbers the condition register.) This means
CR0 is being clobbered unnecessarily in many cases. That
affects some decisions made during some compiler passes
that check for it.
In those cases when the constant used by the ANDCC is a right
justified consecutive set of bits, a shift instruction can
be used which has the same effect if CR0 does not need to be
set. The rule to do that has been added to the late rules file
after other rules using ANDCCconst have been processed in the
main rules file.
Some codegen tests had to be updated since ANDCC is no
longer generated for some cases. A new test case was added to
verify the ANDCC is present if the results for both the AND
and CR0 are used.
Change-Id: I304f607c039a458e2d67d25351dd00aea72ba542
Reviewed-on: https://go-review.googlesource.com/c/go/+/531435
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Paul Murphy <murp@ibm.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Reviewed-by: Jayanth Krishnamurthy <jayanth.krishnamurthy@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
var p *[2]uint32 = ...
p[0] = 0
p[1] = 0
When we combine these two 32-bit stores into a single 64-bit store,
use the line number of the first store, not the second one.
This differs from the default behavior because usually with the combining
that the compiler does, we use the line number of the last instruction
in the combo (e.g. load+add, we use the line number of the add).
This is the same behavior that gcc does in C (picking the line
number of the first of a set of combined stores).
Change-Id: Ie70bf6151755322d33ecd50e4d9caf62f7881784
Reviewed-on: https://go-review.googlesource.com/c/go/+/521678
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
The immediate-data interface shortcuts also apply to pointer-shaped
things like maps, channels, and functions.
Fixes#63505.
Change-Id: I43982441bf523f53e9e5d183e95aea7c6655dd6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/534657
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Auto-Submit: David Chase <drchase@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Do this by removing all stores of zero-sized anything.
Fixes#63433.
Change-Id: I5d8271edab992d15d02005fa3fe31835f2eff8fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/534296
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
It is one less dependent load away, and right next to another
field in the itab we also load as part of the type switch or
type assert.
Change-Id: If7aaa7814c47bd79a6c7ed4232ece0bc1d63550e
Reviewed-on: https://go-review.googlesource.com/c/go/+/533117
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Before range over integer, types2 leaves constant expression in RHS of
non-constant shift untyped, so idealType do the validation to ensure
that constant value must be an int >= 0.
With range over int, the range expression can also be left untyped, and
can be an negative integer, causing the validation false.
Fixing this by relaxing the validation in idealType, and moving the
check to Unified IR reader.
Fixes#63378
Change-Id: I43042536c09afd98d52c5981adff5dbc5e7d882a
Reviewed-on: https://go-review.googlesource.com/c/go/+/532835
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Keith Randall <khr@golang.org>
This is the last of the getitab users to receive a cache.
We should now no longer see getitab (and callees) in profiles.
Hopefully.
Change-Id: I2ed72b9943095bbe8067c805da7f08e00706c98c
Reviewed-on: https://go-review.googlesource.com/c/go/+/531055
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 419456 starts using lookupObj to find types2.Object associated with
builtin functions. However, the new code does not un-parenthesized the
callee expression, causing an ICE because of nil obj returned.
Un-parenthesizing the callee expression fixes the problem.
Fixes#63436
Change-Id: Iebb4fbc08575e7d0b1dbd026c98e8f949ca16460
Reviewed-on: https://go-review.googlesource.com/c/go/+/533476
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Change-Id: If9089f8afd78de3e62cd575f642ff96ab69e2099
GitHub-Last-Rev: 14165018d6
GitHub-Pull-Request: golang/go#63386
Reviewed-on: https://go-review.googlesource.com/c/go/+/532895
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Jorropo <jorropo.pgm@gmail.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Auto-Submit: Michael Pratt <mpratt@google.com>
Convert expand calls into a smaller number of focused
recursive rewrites, and rely on an enhanced version of
"decompose" to clean up afterwards.
Debugging information seems to emerge intact.
Change-Id: Ic46da4207e3a4da5c8e2c47b637b0e35abbe56bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/507295
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
That way we don't need to call into the runtime for every
type assertion (to an interface type).
name old time/op new time/op delta
TypeAssert-24 3.78ns ± 3% 1.00ns ± 1% -73.53% (p=0.000 n=10+8)
Change-Id: I0ba308aaf0f24a5495b4e13c814d35af0c58bfde
Reviewed-on: https://go-review.googlesource.com/c/go/+/529316
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
That way we don't need to call into the runtime when the type being
switched on has been seen many times before.
The cache is just a hash table of a sample of all the concrete types
that have been switched on at that source location. We record the
matching case number and the resulting itab for each concrete input
type.
The caches seldom get large. The only two in a run of all.bash that
get more than 100 entries, even with the sampling rate set to 1, are
test/fixedbugs/issue29264.go, with 101
test/fixedbugs/issue29312.go, with 254
Both happen at the type switch in fmt.(*pp).handleMethods, perhaps
unsurprisingly.
name old time/op new time/op delta
SwitchInterfaceTypePredictable-24 25.8ns ± 2% 2.5ns ± 3% -90.43% (p=0.000 n=10+10)
SwitchInterfaceTypeUnpredictable-24 37.5ns ± 2% 11.2ns ± 1% -70.02% (p=0.000 n=10+10)
Change-Id: I4961ac9547b7f15b03be6f55cdcb972d176955eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/526658
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
For type switches where the targets are interface types,
call into the runtime once instead of doing a sequence
of assert* calls.
name old time/op new time/op delta
SwitchInterfaceTypePredictable-24 26.6ns ± 1% 25.8ns ± 2% -2.86% (p=0.000 n=10+10)
SwitchInterfaceTypeUnpredictable-24 39.3ns ± 1% 37.5ns ± 2% -4.57% (p=0.000 n=10+10)
Not super helpful by itself, but this code organization allows
followon CLs that add caching to the lookups.
Change-Id: I7967f85a99171faa6c2550690e311bea8b54b01c
Reviewed-on: https://go-review.googlesource.com/c/go/+/526657
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
The types2 typechecker already reported all invalid conversions required
by the Go language spec. However, the conversion involves go pragma is
not specified in the spec, so is not checked by types2.
Fixing this by handling the error gracefully during typecheck, just like
how old typechecker did before CL 394575.
Fixes#63333
Change-Id: I04c4121971c62d96f75ded1794ab4bdf3a6cd0ea
Reviewed-on: https://go-review.googlesource.com/c/go/+/532515
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Add a new form of RLDC which maps directly to the ISA definition
of rldc: RLDC Rs, $sh, $mb, Ra. This is used to generate mask
constants described below.
Using MOVD $-1, Rx; RLDC Rx, $sh, $mb, Rx, any mask constant
can be generated. A mask is a contiguous series of 1 bits, which
may wrap.
Change-Id: Ifcaae1114080ad58b5fdaa3e5fc9019e2051f282
Reviewed-on: https://go-review.googlesource.com/c/go/+/531120
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Check for shifted 16b constants, and transform them to avoid the load
penalty. This should be much faster than loading, and reduce binary
size by reducing the constant pool size.
Change-Id: I6834e08be7ca88e3b77449d226d08d199db84299
Reviewed-on: https://go-review.googlesource.com/c/go/+/531119
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Change-Id: I8787458f9ccd3b5cdcdda820d8a45deb4f77eade
GitHub-Last-Rev: be865d67ef
GitHub-Pull-Request: golang/go#63165
Reviewed-on: https://go-review.googlesource.com/c/go/+/530120
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
This sequence can show up in the lowering pass on PPC64. If it
makes it to the latelower pass, it will cause an error because
it looks like it can be turned into RLDICL, but -1 isn't an
accepted mask.
Also, print more debug info if panic is called from
encodePPC64RotateMask.
Fixes#62698
Change-Id: I0f3322e2205357abe7fc28f96e05e3f7ad65567c
Reviewed-on: https://go-review.googlesource.com/c/go/+/529195
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Add compiler support for range over functions.
See the large comment at the top of
cmd/compile/internal/rangefunc/rewrite.go for details.
This is only reachable if GOEXPERIMENT=range is set,
because otherwise type checking will fail.
For proposal #61405 (but behind a GOEXPERIMENT).
For #61717.
Change-Id: I05717f94e63089c503acc49b28b47edeb4e011b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/510541
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Russ Cox <rsc@golang.org>
Add compiler implementation of range over integers.
This is only reachable if GOEXPERIMENT=range is set,
because otherwise type checking will fail.
For proposal #61405 (but behind a GOEXPERIMENT).
For #61717.
Change-Id: I4e35a73c5df1ac57f61ffb54033a433967e5be51
Reviewed-on: https://go-review.googlesource.com/c/go/+/510538
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Russ Cox <rsc@golang.org>
Add type-checking logic for range over integers and functions,
behind GOEXPERIMENT=range.
For proposal #61405 (but behind a GOEXPERIMENT).
For #61717.
Change-Id: Ibf78cf381798b450dbe05eb922df82af2b009403
Reviewed-on: https://go-review.googlesource.com/c/go/+/510537
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Auto-Submit: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
This patch changes the inliner to use callsite scores when deciding to
inline as opposed to looking only at callee cost/hairyness.
For this to work, we have to relax the inline budget cutoff as part of
CanInline to allow for the possibility that a given function might
start off with a cost of N where N > 80, but then be called from a
callsites whose score is less than 80. Once a given function F in
package P has been approved by CanInline (based on the relaxed budget)
it will then be emitted as part of the export data, meaning that other
packages importing P will need to also need to compute callsite scores
appropriately.
For a function F that calls function G, if G is marked as potentially
inlinable then the hairyness computation for F will use G's cost for
the call to G as opposed to the default call cost; for this to work
with the new scheme (given relaxed cost change described above) we
use G's cost only if it falls below inlineExtraCallCost, otherwise
just use inlineExtraCallCost.
Included in this patch are a bunch of skips and workarounds to
selected 'errorcheck' tests in the <GOROOT>/test directory to deal
with the additional "can inline" messages emitted when the new inliner
is turned on.
Change-Id: I9be5f8cd0cd8676beb4296faf80d2f6be7246335
Reviewed-on: https://go-review.googlesource.com/c/go/+/519197
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
There's several copies of this function. We only need one.
While here, normalize so that we always declare parameters, and always
use the names ~pNN for params and ~rNN for results.
Change-Id: I49e90d3fd1820f3c07936227ed5cfefd75d49a1c
Reviewed-on: https://go-review.googlesource.com/c/go/+/528415
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Than McIntosh <thanm@google.com>
sparse conditional constant propagation can discover optimization
opportunities that cannot be found by just combining constant folding
and constant propagation and dead code elimination separately.
This is a re-submit of PR#59575, which fix a broken dominance relationship caught by ssacheck
Updates https://github.com/golang/go/issues/59399
Change-Id: I57482dee38f8e80a610aed4f64295e60c38b7a47
GitHub-Last-Rev: 830016f24e
GitHub-Pull-Request: golang/go#60469
Reviewed-on: https://go-review.googlesource.com/c/go/+/498795
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Previously, the unified frontend implemented unsafe.Sizeof, etc that
involved derived types by constructing a normal OSIZEOF, etc
expression, including fully instantiating their argument. (When
unsafe.Sizeof is applied to a non-generic type, types2 handles
constant folding it.)
This worked, but involves unnecessary work, since all we really need
to track is the argument type (and the field selections, for
unsafe.Offsetof).
Further, the argument expression could generate temporary variables,
which would then go unused after typecheck replaced the OSIZEOF
expression with an OLITERAL. This results in compiler failures after
CL 523315, which made later passes stricter about expecting the
frontend to not construct unused temporaries.
Fixes#62515.
Change-Id: I37baed048fd2e35648c59243f66c97c24413aa94
Reviewed-on: https://go-review.googlesource.com/c/go/+/527097
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Currently, cmd/compile optimizes `var a = true; var b = a` into `var a
= true; var b = true`. But this may not be safe if we need to
initialize any other global variables between `a` and `b`, and the
initialization involves calling a user-defined function that reassigns
`a`.
This CL changes staticinit to keep track of the initialization
expressions that we've seen so far, and to stop applying the
staticcopy optimization once we've seen an initialization expression
that might have modified another global variable within this package.
To help identify affected initializers, this CL adds a -d=staticcopy
flag to warn when a staticcopy is suppressed and turned into a dynamic
copy.
Currently, `go build -gcflags=all=-d=staticcopy std` reports only four
instances:
```
encoding/xml/xml.go:1600:5: skipping static copy of HTMLEntity+0 with map[string]string{...}
encoding/xml/xml.go:1869:5: skipping static copy of HTMLAutoClose+0 with []string{...}
net/net.go:661:5: skipping static copy of .stmp_31+0 with poll.ErrNetClosing
net/http/transport.go:2566:5: skipping static copy of errRequestCanceled+0 with ~R0
```
Fixes#51913.
Change-Id: Iab41cf6f84c44f7f960e4e62c28a8aeaade4fbcf
Reviewed-on: https://go-review.googlesource.com/c/go/+/395541
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
When creating the struct type to hold variables captured by a function
literal, we currently reuse the captured variable names as fields.
However, there's no particular reason to do this: these struct types
aren't visible to users, and it adds extra complexity in making sure
fields belong to the correct packages.
Further, it turns out we were getting that subtly wrong. If two
function literals from different packages capture variables with
identical names starting with an uppercase letter (and in the same
order and with corresponding identical types) end up in the same
function (e.g., due to inlining), then we could end up creating
closure struct types that are "different" (i.e., not types.Identical)
yet end up with equal LinkString representations (which violates
LinkString's contract).
The easy fix is to just always use simple, exported, generated field
names in the struct. This should allow further struct reuse across
packages too, and shrink binary sizes slightly.
Fixes#62498.
Change-Id: I9c973f5087bf228649a8f74f7dc1522d84a26b51
Reviewed-on: https://go-review.googlesource.com/c/go/+/527135
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
One of the more tedious quirks of the original frontend (i.e.,
typecheck) to preserve was that it preserved the original
representation of constants into the backend. To fit into the unified
IR model, I ended up implementing a fairly heavyweight workaround:
simply record the original constant's string expression in the export
data, so that diagnostics could still report it back, and match the
old test expectations.
But now that there's just a single frontend to support, it's easy
enough to just update the test expectations and drop this support for
"raw" constant expressions.
Change-Id: I1d859c5109d679879d937a2b213e777fbddf4f2f
Reviewed-on: https://go-review.googlesource.com/c/go/+/526376
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Unfortunately, there isn't a single op that provides the resulting
computation.
At least, I couldn't find one.
Fixes#62469
Change-Id: I236f3965b827aaeb3d70ef9fe89be66b116494f5
Reviewed-on: https://go-review.googlesource.com/c/go/+/526276
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Generate RLDIC[LR] instead of MOVD mask, Rx; AND Rx, Ry, Rz.
This helps reduce code size, and reduces the latency caused
by the constant load.
Similarly, for smaller-than-register values, truncate constants
which exceed the range of the value's type to avoid needing to
load a constant.
Change-Id: I6019684795eb8962d4fd6d9585d08b17c15e7d64
Reviewed-on: https://go-review.googlesource.com/c/go/+/515576
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
This reverts commit c1dfbf72e1.
Reason for revert: TESTL rule is wrong when the result is used for an ordered comparison.
Fixes#62360
Change-Id: I4d5b6aca24389b0a2bf767bfbc0a9d085359eb38
Reviewed-on: https://go-review.googlesource.com/c/go/+/524255
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Jakub Ciolek <jakub@ciolek.dev>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
In CL 522879, I moved the logic for setting Addrtaken from typecheck's
markAddrOf and ComputeAddrtaken directly into ir.NewAddrExpr. However,
I took the logic from markAddrOf, and failed to notice that
ComputeAddrtaken also set Addrtaken on the canonical ONAME.
The result is that if the only address-of expressions were within a
function literal, the canonical variable never got marked Addrtaken.
In turn, this could cause the consistency check in ir.Reassigned to
fail. (Yay for consistency checks turning mistakes into ICEs, rather
than miscompilation.)
Fixes#62313.
Change-Id: Ieab2854cd7fcc1b6c5d1e61de66453add9890a4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/523375
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
