We should preserve the fact that a roundtrip read on fields with the zero
value should remain the zero for those that are reasonable to stay that way.
If the zero value for a MS-DOS timestamp was used, then it is sensible for
that zero value to also be read back later.
Fixes#17403
Change-Id: I32c3915eab180e91ddd2499007374f7b85f0bd76
Reviewed-on: https://go-review.googlesource.com/30811
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Also, fix a byte-ordering problem with stack maps for assembly
function signatures on big-endian targets.
Change-Id: I6e8698f5fbb04b31771a65f4a8f3f9c045ff3c98
Reviewed-on: https://go-review.googlesource.com/30816
Reviewed-by: Austin Clements <austin@google.com>
We save and restore the link register in non-leaf functions because
it is clobbered by CALLs. It is therefore available for general
purpose use.
Only enabled on s390x currently. The RC4 benchmarks in particular
benefit from the extra register:
name old speed new speed delta
RC4_128 243MB/s ± 2% 341MB/s ± 2% +40.46% (p=0.008 n=5+5)
RC4_1K 267MB/s ± 0% 359MB/s ± 1% +34.32% (p=0.008 n=5+5)
RC4_8K 271MB/s ± 0% 362MB/s ± 0% +33.61% (p=0.008 n=5+5)
Change-Id: Id23bff95e771da9425353da2f32668b8e34ba09f
Reviewed-on: https://go-review.googlesource.com/30597
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The Subject and Issuer names in a certificate look like they should be a
list of key-value pairs. However, they're actually a list of lists of
key-value pairs. Previously we only looked at the first element of each
sublist and the vast majority of certificates only have one element per
sublist.
However, it's possible to have multiple elements and some 360
certificates from the “Pilot” log are so constructed.
This change causes all elements of the sublists to be processed.
Fixes#16836.
Change-Id: Ie0a5159135b08226ec517fcf251aa17aada37857
Reviewed-on: https://go-review.googlesource.com/30810
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In some cases the members of the root set from which flood
runs themselves escape, without their referents being also
tagged as escaping. Fix this by reflooding from those roots
whose escape increases, and also enhance the "leak" test to
include reachability from a heap-escaped root.
Fixes#17318.
Change-Id: Ied1e75cee17ede8ca72a8b9302ce8201641ec593
Reviewed-on: https://go-review.googlesource.com/30693
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
A later CL will be adding more code here.
It will help to keep it separate from the other code.
Change-Id: I971ba53de819cd10991b51fdec665984939a5f9b
Reviewed-on: https://go-review.googlesource.com/30709
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The Montgomery multiply code is applicable to this case
but was being bypassed. Don't do that.
The old test len(x) > 1 was really just a bad approximation to x > 1.
name old time/op new time/op delta
Exp-8 5.56ms ± 4% 5.73ms ± 3% ~ (p=0.095 n=5+5)
Exp2-8 7.59ms ± 1% 5.66ms ± 1% -25.40% (p=0.008 n=5+5)
This comes up especially when doing Fermat (Miller-Rabin)
primality tests with base 2.
Change-Id: I4cc02978db6dfa93f7f3c8f32718e25eedb4f5ed
Reviewed-on: https://go-review.googlesource.com/30708
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This way you can still run 'go test' or 'go bench -run Foo'
without wondering why it is taking so very long.
Change-Id: Icfa097a6deb1d6682acb7be9f34729215c29eabb
Reviewed-on: https://go-review.googlesource.com/30707
Reviewed-by: Robert Griesemer <gri@golang.org>
ARM direct CALL/JMP instruction has 24 bit offset, which can only
encodes jumps within +/-32M. When the target is too far, the top
bits get truncated and the program jumps wild.
This CL detects too-far jumps and automatically insert trampolines,
currently only internal linking on ARM.
It is necessary to make the following changes to the linker:
- Resolve direct jump relocs when assigning addresses to functions.
this allows trampoline insertion without moving all code that
already laid down.
- Lay down packages in dependency order, so that when resolving a
inter-package direct jump reloc, the target address is already
known. Intra-package jumps are assumed never too far.
- a linker flag -debugtramp is added for debugging trampolines:
"-debugtramp=1 -v" prints trampoline debug message
"-debugtramp=2" forces all inter-package jump to use
trampolines (currently ARM only)
"-debugtramp=2 -v" does both
- Some data structures are changed for bookkeeping.
On ARM, pseudo DIV/DIVU/MOD/MODU instructions now clobber R8
(unfortunate). In the standard library there is no ARM assembly
code that uses these instructions, and the compiler no longer emits
them (CL 29390).
all.bash passes with -debugtramp=2, except a disassembly test (this
is unavoidable as we changed the instruction).
TBD: debug info of trampolines?
Fixes#17028.
Change-Id: Idcce347ea7e0af77c4079041a160b2f6e114b474
Reviewed-on: https://go-review.googlesource.com/29397
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If we get a SIGPROF on a non-Go thread, and the program has not called
runtime.SetCgoTraceback so we have no way to collect a stack trace, then
record a profile that is just the PC where the signal occurred. That
will at least point the user to the right area.
Retrieving the PC from the sigctxt in a signal handler on a non-G thread
required marking a number of trivial sigctxt methods as nosplit, and,
for extra safety, nowritebarrierrec.
The test shows that the existing test CgoPprofThread test does not test
the stack trace, just the profile signal. Leaving that for later.
Change-Id: I8f8f3ff09ac099fc9d9df94b5a9d210ffc20c4ab
Reviewed-on: https://go-review.googlesource.com/30252
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
When starting tracing, EvGoCreate events are added for existing
goroutines that may have been blocking in syscall. EvGoCreate
increments the runnable goroutine count. This change makes the
following EvGoInSyscall event decrement the runnable goroutine count
because we now know that goroutine is in syscall, and not runnable.
Made generateTrace return an error, at any given time, the number
of runnable/running/insyscall goroutines becomes non-negative.
Added a basic test that checks the number of runnable/running
goroutines don't include the goroutines in syscall - the test failed
before this change.
Change-Id: Ib732c382e7bd17158a437576f9d589ab89097ce6
Reviewed-on: https://go-review.googlesource.com/25552
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
CL 14472 solved issue #12030 by explicitly linking msvcrt.dll
to every cgo executable we build. This CL achieves the same
by manually loading ntdll.dll during startup.
Updates #12030
Change-Id: I5d9cd925ef65cc34c5d4031c750f0f97794529b2
Reviewed-on: https://go-review.googlesource.com/30737
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
The (pc, line) deltas in the line number information are currently encoded
either with a special opcode, or with a triplet of DW_LNS_advance_pc,
DW_LNS_advance_line, and DW_LNS_copy instructions. Instead of DW_LNS_copy,
this change always uses a special opcode, which can make DW_LNS_advance_pc or
DW_LNS_advance_line unnecessary, or make their operands take fewer bytes. It
chooses the special opcode so that the encoding of the remaining deltas is as
small as possible.
Use DW_LNS_const_add_pc or DW_LNS_fixed_advance_pc instead of DW_LNS_advance_pc
for deltas where they save a byte.
Update LINE_BASE and LINE_RANGE constants to optimal values for this strategy.
This reduces line number information by about 35% and total size by about 2%
for a typical binary.
Change-Id: Ia61d6bf19c95c1d34ba63c67ed32b376beda225f
Reviewed-on: https://go-review.googlesource.com/30577
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
- Add new BenchmarkQuoRem.
- Eliminate allocation in divLarge nat pool
- Unroll mulAddVWW body 4x
- Remove some redundant slice loads in divLarge
name old time/op new time/op delta
QuoRem-8 2.18µs ± 1% 1.93µs ± 1% -11.38% (p=0.000 n=19+18)
The starting point in the comparison here is Cherry's
pending CL to turn mulWW and divWW into intrinsics.
The optimizations in divLarge work best because all
the function calls are gone. The effect of this CL is not
as large if you don't assume Cherry's CL.
Change-Id: Ia6138907489c5b9168497912e43705634e163b35
Reviewed-on: https://go-review.googlesource.com/30613
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This, along with CL 30140, removes ~50% of stack write barriers
mentioned in issue #17330. The remaining are most due to Phi and
FwdRef, which is not resolved when building SSA. We might be
able to do it at a later stage where Phi and Copy propagations
are done, but matching an if-(store-store-call)+ sequence seems
not very pleasant.
Updates #17330.
Change-Id: Iaa36c7b1f4c4fc3dc10a27018a3b0e261094cb21
Reviewed-on: https://go-review.googlesource.com/30290
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Inputs to store[BHW] and cmpW(U) need not be correct
in more bits than are used by the instruction.
Added a pattern tailored to what appears to be cgo boilerplate.
Added a pattern (also seen in cgo boilerplate and hashing)
to replace {EQ,NE}-CMP-ANDconst with {EQ-NE}-ANDCCconst.
Added a pattern to clean up ANDconst shift distance inputs
(this was seen in hashing).
Simplify repeated and,or,xor.
Fixes#17109.
Change-Id: I68eac83e3e614d69ffe473a08953048c8b066d88
Reviewed-on: https://go-review.googlesource.com/30455
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This is a followup to issue #13805. That change avoid leaks for types that
don't have any pointers for the single assignment form of a dottype expression.
This does the same for the double assignment form.
Fixes#15796
Change-Id: I27474cade0ff1f3025cb6392f47b87b33542bc0f
Reviewed-on: https://go-review.googlesource.com/24906
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Renamed TestPOSTQuery to TestParseFormQuery and added testing
for the ";" delimiter, an empty key, an empty value and an
empty key + value.
Also added TestParseFormQueryMethods to make sure forms sent in
PATCH and PUT (and no others) request are parsed correctly in
ParseForm.
Fixes#17368
Change-Id: I445aad324ffc7b38d179ea41953bffbac0cddffe
Reviewed-on: https://go-review.googlesource.com/30555
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL removes support for MOVD instructions that store the address
of a global variable. For example:
MOVD $main·a(SB), (R1)
MOVD $main·b(SB), main·c(SB)
These instructions are emulated and the new backend doesn't need them
(the stores now always go through an intermediate register).
Change-Id: I3a1bcb3f19c5096ad0426afd76d35a4d7975733b
Reviewed-on: https://go-review.googlesource.com/30720
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
With this change, the code in bug #15609 compiles and runs properly:
0000000000401070 <main.jump>:
401070: ff 15 aa 7e 06 00 callq *0x67eaa(%rip) # 468f20 <main.pointer>
401076: c3 retq
0000000000468f20 g O .rodata 0000000000000008 main.pointer
Fixes#15609
Change-Id: Iebb4d5a9f9fff335b693f4efcc97882fe04eefd7
Reviewed-on: https://go-review.googlesource.com/22950
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
With help of a new interactive commit classifier tool (tool location
TBD, likely x/build/cmd/writenotes), classify all commits from go1.7
up to 56d35d4.
We can selectively cull this list later. When in doubt, I erred on the
side of inclusion for now.
Change-Id: I458945004e1b1a148fb2f294b454a390ef4f92c2
Reviewed-on: https://go-review.googlesource.com/30696
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TESTB was implemented as AND $0xff, Rx, REGTMP. Unfortunately there
is no 3-operand AND-with-immediate instruction and so it was emulated
by the assembler using two instructions.
This CL uses CMPW instead of AND and also optimizes CMPW to use
the chi instruction where possible.
Overall this CL reduces the size of the .text section of the
bin/go binary by ~2%.
Change-Id: Ic335c29fc1129378fcbb1265bfb10f5b744a0f3f
Reviewed-on: https://go-review.googlesource.com/30690
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
No need to build a bespoke dom tree here when we might
have one cached already. The allocations for the dom tree
were also more expensive than they needed to be.
Fixes#12021
Change-Id: I6a967880aee03660ad6fc293f8fc783779cae11d
Reviewed-on: https://go-review.googlesource.com/30671
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The algorithm for placing a phi nodes in small functions now
unreachable. This patch fix that.
Change-Id: I253d745b414fa12ee0719459c28e78a69c6861ae
Reviewed-on: https://go-review.googlesource.com/30106
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Currently these are labeled "MARK", which was accurate in the STW
collector, but these really indicate mark termination now, since
marking happens for the full duration of the concurrent GC. Re-label
them as "MARK TERMINATION" to clarify this.
Change-Id: Ie98bd961195acde49598b4fa3f9e7d90d757c0a6
Reviewed-on: https://go-review.googlesource.com/30018
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Currently, the process-wide GC state is attributed to the P that
happened to perform the allocation that exceeded the GC trigger. This
is pretty arbitrary and makes it hard to see when GC is running since
the GC spans are intermingled with a lot of other trace noise.
The current display is particularly confusing because it creates three
sub-rows in the P row that can overlap each other. Usually a P has
just two sub-rows: one showing the current G and another showing that
G's activity. However, because GC is attributed to a proc, it winds up
as a third row that neither subsumes nor is subsumed by any other row.
This in turn screws up the trace's layout and results in overlapping
events.
Fix these problems by creating a new dedicated row like the existing
"Network" and "Timer" rows and displaying process-wide GC events in
this row. Mark termination and sweep events still appear in their
respective P rows because these are meaningfully attributed.
Change-Id: Ie1a1c6cf8c446e4b043f10f3968f91ff1b546d15
Reviewed-on: https://go-review.googlesource.com/30017
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
When GC is disabled, we set gcpercent to -1. However, we still use
gcpercent to compute several values, such as next_gc and gc_trigger.
These calculations are meaningless when gcpercent is -1 and result in
meaningless values. This is okay in a sense because we also never use
these values if gcpercent is -1, but they're confusing when exposed to
the user, for example via MemStats or the execution trace. It's
particularly unfortunate in the execution trace because it attempts to
plot the underflowed value of next_gc, which scales all useful
information in the heap row into oblivion.
Fix this by making next_gc ^0 when gcpercent < 0. This has the
advantage of being true in a way: next_gc is effectively infinite when
gcpercent < 0. We can also detect this special value when updating the
execution trace and report next_gc as 0 so it doesn't blow up the
display of the heap line.
Change-Id: I4f366e4451f8892a4908da7b2b6086bdc67ca9a9
Reviewed-on: https://go-review.googlesource.com/30016
Reviewed-by: Rick Hudson <rlh@golang.org>
No point doing this check all the time.
Fixes#15621
Change-Id: I1966c061986fe98fe9ebe146d6b9738c13cef724
Reviewed-on: https://go-review.googlesource.com/30670
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL makes minor adjustment to the handling of spaces and newlines
and then documents the result.
The semantic adjustment mainly concerns the handling of a run of
spaces following a newline in the format, like in "\n ".
Previously, that run of spaces was ignored entirely, leading to paradoxes
like the format "1 \n 2" not matching itself as input.
Now, spaces following a newline in the format match zero or more
spaces following the corresponding newline in the input.
The changes to the test suite show how minor the semantic adjustments are
and how they make the behavior more regular than previously.
This CL also updates the documentation to explain the handling of
spaces more precisely, incorporating the draft from CL 17723 but
describing the newly introduced behavior.
Fixes#13565.
Change-Id: I129666e9ba42de3c28b67f75cb47488e9a4c1867
Reviewed-on: https://go-review.googlesource.com/30611
Reviewed-by: Rob Pike <r@golang.org>
There are no semantic changes here, just tests to establish
the status quo. A followup CL will make some semantic changes,
the (limited) scope of which should be clear from the number of
tests that change.
For #13565.
Change-Id: I960749cf59d4dfe39c324875bcc575096654f883
Reviewed-on: https://go-review.googlesource.com/30610
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
On 64-bit big-endian GNU/Linux machines we need to treat sigset as a
single uint64, not as a pair of uint32 values. This fix was already made
for s390x, but not for ppc64 (which is big-endian--the little endian
version is known as ppc64le). So copy os_linux_390.x to
os_linux_be64.go, and use build constraints as needed.
Fixes#17361
Change-Id: Ia0eb18221a8f5056bf17675fcfeb010407a13fb0
Reviewed-on: https://go-review.googlesource.com/30602
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This simply documents the status quo accepted by cmd/compile, gccgo,
and go/types. The new language matches the language used for indices
of index expressions for arrays and slices.
Fixes#16679.
Change-Id: I65447889fbda9d222f2a9e6c10334d1b38c555f0
Reviewed-on: https://go-review.googlesource.com/30474
Reviewed-by: Rob Pike <r@golang.org>
