There are some basic tests in the packages implementing the hashes,
but this one is meant to be comprehensive for the standard library
as a whole.
Most importantly, it locks in the current representations and makes
sure that they do not change from release to release (and also, as a
result, that future releases can parse the representations generated
by older releases).
The crypto/* MarshalBinary implementations are being changed
in this CL to write only d.x[:d.nx] to the encoding, with zeros for
the remainder of the slice d.x[d.nx:]. The old encoding wrote the
whole d.x, but that exposed an internal detail: whether d.x is
cleared after a full buffer is accumulated, and also whether d.x was
used at all for previous blocks (consider 1-byte writes vs 1024-byte writes).
The new encoding writes only what the decoder needs to know,
nothing more.
In fact the old encodings were arguably also a security hole,
because they exposed data written even before the most recent
call to the Reset method, data that clearly has no impact on the
current hash and clearly should not be exposed. The leakage
is clearly visible in the old crypto/sha1 golden test tables also
being modified in this CL.
Change-Id: I4e9193a3ec5f91d27ce7d0aa24c19b3923741416
Reviewed-on: https://go-review.googlesource.com/82136
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
String method comments should explain what they do,
not that they are attempting to implement fmt.Stringer.
Change-Id: If51dd1ff2f0c2f9ef9dca569bfa0c3914be2e8fe
Reviewed-on: https://go-review.googlesource.com/82081
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The docs make it seem like they are all things a single object
would implement. That's true of Driver and DriverContext,
but Connector is really something else. Attempt to clarify.
Change-Id: I8fdf1cff855a0fbe37ea22720c082045c719a267
Reviewed-on: https://go-review.googlesource.com/82082
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Theophanes <kardianos@gmail.com>
Go 1.10 is adding new API MarshalPKCS1PublicKey and
ParsePKCS1PublicKey for converting rsa.PublicKeys.
Even though we'd prefer that users did not, check that
if users call asn1.Marshal and asn1.Unmarshal directly instead,
they get the same results. We know that code exists in the
wild that depends on this.
Change-Id: Ia385d6954fda2eba7da228dc42f229b6839ef11e
Reviewed-on: https://go-review.googlesource.com/82080
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Originally these routines could not fail except by
returning errors from the underlying writer.
Then we realized that header keys containing colons
needed to be rejected, and we started returning an error
from Encode. But that only happens after writing a
partial PEM block to the underlying writer, which is
unfortunate, but at least it was undocumented.
CL 77790 then documented this unfortunate behavior.
Instead of documenting unfortunate behavior, fix it.
Change-Id: Ic7467a576c4cecd16a99138571a1269cc4f96204
Reviewed-on: https://go-review.googlesource.com/82076
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
They do not convert a plural into a singular.
(Introduced recently, in CL 77050.)
Change-Id: I3b6c4d03b1866d4133e90b8ab05e8d4bfbd55125
Reviewed-on: https://go-review.googlesource.com/82078
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The new example is shorter but illustrates the
interesting parts of the Unix function and methods.
Change-Id: Ief8ec38909d4ed7829e8d3da58e7b7f712537f99
Reviewed-on: https://go-review.googlesource.com/82079
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Historically, DetectContentType has returned "text/plain; charset=utf-8"
for an empty body, there was a test for this, and there should continue
to be one.
CL 46631 changed the content-serving handlers to avoid setting any
Content-Type header when serving empty content. Even if that change
in behavior is correct, the CL is explicitly not changing DetectContentType,
so it must also not change DetectContentType's tests.
Change-Id: I7a19c9fabb43be47e349b40e729e49fceb3f2894
Reviewed-on: https://go-review.googlesource.com/82077
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This fixes a regression where only CRLF was folded into LF at EOF.
Now, we also truncate trailing CR at EOF to preserve the old behavior.
Every one of the test cases added exactly matches the behavior
of Go1.9, even if the results are somewhat unexpected.
Fixes#22937
Change-Id: I1bc6550533163ae489ea77ec1e598163267b7eec
Reviewed-on: https://go-review.googlesource.com/81577
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The previous implementation of net.Pipe was just a thin wrapper around
io.Pipe and did not wrap any of the io.Pipe errors as net.Errors.
As a result of Hyrum's law, users have come to depend on the fact that
net.Pipe returns io.ErrClosedPipe when the pipe is closed.
Thus, we preserve this behavior to avoid regressing such use cases.
Change-Id: I06b387877b944c1c08527601f58983872b7557b4
Reviewed-on: https://go-review.googlesource.com/81777
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Sometimes people use run.bash repeatedly
or run go tool dist test by hand for cgo tests.
Avoid test caching in that case, by request.
Refactor code so that all go test commands
share a common prefix.
If not caching is problematic it will be a one-line
change to turn caching back on.
Fixes#22758.
Change-Id: I17d721b832d97bffe26629d21f85b05dbbf2b3ec
Reviewed-on: https://go-review.googlesource.com/80735
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
There are, unfortunately, intermediate CA ceritificates in circulation
that contain the invalid character '&' in some PrintableString fields,
notably Organization Name. This patch allows for ampersand
to be parsed as though it is valid in an ASN.1 PrintableString.
Fixes#22970
Change-Id: Ifab1a10bbff1cdac68e843c6b857ff1a031051aa
Reviewed-on: https://go-review.googlesource.com/81635
Reviewed-by: Adam Langley <agl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When the user context which passed in (*DB)BeginTx is canceled or
timeout, the current implementation could cause db transaction leak
in some extreme scenario.
Goroutine 1:
Call (*DB) BeginTx begins a transaction with a userContext.
In (*DB)BeginTx, a new goroutine (*Tx)awaitDone
which monitor context and rollback tx if needed will be created
Goroutine 2(awaitDone):
block on tx.ctx.Done()
Goroutine 1:
Execute some insert or update sqls on the database
Goroutine 1:
Commit the transaction, (*Tx)Commit set
the atomic variable tx.done to 1
Goroutine 3(maybe global timer):
Cancel userContext which be passed in Tx
Goroutine 1:
(*Tx)Commit checks tx.ctx.Done().
Due to the context has been canceled, it will return
context.Canceled or context.DeadlineExceeded error immediately
and abort the real COMMIT operation of transaction
Goroutine 2:
Release with tx.ctx.Done() signal, execute (*Tx)rollback.
However the atomic variable tx.done is 1 currently,
it will return ErrTxDone error immediately and
abort the real ROLLBACK operation of transaction
Fixes#22976
Change-Id: I3bc23adf25db823861d91e33d3cca6189fb1171d
Reviewed-on: https://go-review.googlesource.com/81736
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Daniel Theophanes <kardianos@gmail.com>
Make sure that when we're assigning to a map, we evaluate the
right-hand side before we attempt to insert into the map.
We used to evaluate the left-hand side to a pointer-to-slot-in-bucket
(which as a side effect does len(m)++), then evaluate the right-hand side,
then do the assignment. That clearly isn't correct when the right-hand side
might panic.
Fixes#22881
Change-Id: I42a62870ff4bf480568c9bdbf0bb18958962bdf0
Reviewed-on: https://go-review.googlesource.com/81817
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Turn off append-to-itself optimization if optimizations are turned off.
This optimization triggered a bug when doing
s = append(s, s)
where we write to the leftmost s before reading the rightmost s.
Update #17039
Change-Id: I21996532d20a75db6ec8d49db50cb157a1360b80
Reviewed-on: https://go-review.googlesource.com/81816
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This test was added recently as a regress test for the spec relaxation
in #9060, but doesn't work correctly yet. Disable for now to fix noopt
builders.
Updates #22444.
Change-Id: I45c521ae0da7ffb0c6859d6f7220c59828ac6149
Reviewed-on: https://go-review.googlesource.com/81775
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The DWARF inline info generation hooks weren't properly
handling unused auto vars in certain cases, triggering an assert (now
fixed). Also with this change, introduce a new autom "flavor" to
use for autom entries that are added to insure that a specific
auto type makes it into the linker (this is a follow-on to the fix
for 22941).
Fixes#22962.
Change-Id: I7a2d8caf47f6ca897b12acb6a6de0eb25f5cac8f
Reviewed-on: https://go-review.googlesource.com/81557
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The iOS test harness dumps the output of its lldb session to stdout,
but only if the lldb session was successfully started.
Make sure the log is always dumpede, so that lldb startup failures
such as
lldb setup error: exited (lldb start: exit status 253)
can be diagnosed.
For the iOS builders.
Change-Id: Ie0e3341dd8f84a88d26509c34816668d3ebbfaa0
Reviewed-on: https://go-review.googlesource.com/76195
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
The whole GOROOT/pkg tree is installed using the GOHOSTOS/GOHOSTARCH
toolchain (installed in GOROOT/pkg/tool/GOHOSTOS_GOHOSTARCH).
The testgo.exe we run during the cmd/go test will be built
for GOOS/GOARCH, which means it will use the GOOS/GOARCH toolchain
(installed in GOROOT/pkg/tool/GOOS_GOARCH).
If these are not the same toolchain, then the entire standard library
will look out of date to testgo.exe (the compilers in those two different
tool directories are built for different architectures and have different
buid IDs), which will cause many tests to do unnecessary rebuilds
and some tests to attempt to overwrite the installed standard library,
which will in turn make it look out of date to whatever runs after the
cmd/go test exits.
Bail out entirely in this case instead of destroying the world.
The changes outside TestMain are checks that might have caught
this a bit earlier and made it much less confusing to debug.
Fixes#22709.
Fixes#22965.
Change-Id: Ibf28fa19e29a1f1b8f17875f446d3474dd04a924
Reviewed-on: https://go-review.googlesource.com/81516
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If we're using -covermode=atomic with -coverpkg, to add coverage
to more than just the package being tested, then we need to make sure
to make sync/atomic available to the compiler for every package
being recompiled for coverage.
Fixes#22728.
Change-Id: I27f88f6a62e37d4a7455554cd03c8ca2b21f81a4
Reviewed-on: https://go-review.googlesource.com/81497
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change updates runtime.semasleep to no longer call
runtime.nanotime and instead calls lwp_park with a duration to sleep
relative to the monotonic clock, so the nanotime is never called.
(This requires updating to a newer version of the lwp_park system
call, which is safe, because Go 1.10 will require the unreleased
NetBSD 8+ anyway)
Additionally, this change makes the nanotime function use the
monotonic clock for netbsd/arm, which was forgotten from
https://golang.org/cl/81135 which updated netbsd/amd64 and netbsd/386.
Because semasleep previously depended on nanotime, the past few days
of netbsd have likely been unstable because lwp_park was then mixing
the monotonic and wall clocks. After this CL, lwp_park no longer
depends on nanotime.
Original patch submitted at:
https://www.netbsd.org/~christos/go-lwp-park-clock-monotonic.diff
This commit message (any any mistakes therein) were written by Brad
Fitzpatrick. (Brad migrated the patch to Gerrit and checked CLAs)
Updates #6007Fixes#22968
Also updates netbsd/arm to use monotonic time for
Change-Id: If77ef7dc610b3025831d84cdfadfbbba2c52acb2
Reviewed-on: https://go-review.googlesource.com/81715
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Note that Interrupt will compile but not work on Windows.
Fixes#22454
Change-Id: If011c32211f4bb45d458317e113b9794d5b4a4b1
Reviewed-on: https://go-review.googlesource.com/81035
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The full truth seems too complicated to write in this method's doc, so
I'm going with a simple half truth.
The full truth is that Fd returns the descriptor in blocking mode,
because that is historically how it worked, and existing programs
would be surprised if the descriptor is suddenly non-blocking. On Unix
systems whether a file is non-blocking or not is a property of the
underlying file description, not of a particular file descriptor, so
changing the returned descriptor to blocking mode also changes the
existing File to blocking mode. Blocking mode works fine, althoug I/O
operations now take up a thread. SetDeadline and friends rely on the
runtime poller, and the runtime poller only works if the descriptor is
non-blocking. So it's correct that calling Fd disables SetDeadline.
The other half of the truth is that if the program is willing to work
with a non-blocking descriptor, it could call
syscall.SetNonblock(descriptor, true) to change the descriptor, and
the original File, to non-blocking mode. At that point SetDeadline
would start working again. I tried to write that in a way that is
short and comprehensible but failed. Since deadlines mostly work on
pipes, and there isn't much reason to call Fd on a pipe, and few
people use SetDeadline, I decided to punt.
Fixes#22934
Change-Id: I2e49e036f0bcf71f5365193831696f9e4120527c
Reviewed-on: https://go-review.googlesource.com/81636
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
That Parse doesn't parse ("foo.com/path" or "foo.com:443/path") has
become something of a FAQ.
Updates #19779
Updates #21415
Updates #22955
Change-Id: Ib68efddb67f59b1374e8ed94effd4a326988dee7
Reviewed-on: https://go-review.googlesource.com/81436
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Simply choose an extremely unlikely path name in the test is fine.
Fixes#21013.
Change-Id: I56c0a1986b5ef5d618c7fe2b14701f584fe81c37
Reviewed-on: https://go-review.googlesource.com/81578
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
MAP_ANON is the deprecated but more portable spelling of
MAP_ANONYMOUS. Use MAP_ANON to un-break the Darwin 10.10 builder.
Updates #22930.
Change-Id: Iedd6232b94390b3b2a7423c45cdcb25c1a5b3323
Reviewed-on: https://go-review.googlesource.com/81615
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The test binaries accept -timeout=0 to mean no timeout,
but then the backup timer in cmd/go kills the test after 1 minute.
Make cmd/go understand this special case and change
behavior accordingly.
Fixes#14780.
Change-Id: I66bf517173a4ad21d53a5ee88d163f04b8929fb6
Reviewed-on: https://go-review.googlesource.com/81499
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Also be clear that go test output is not suitable for piping into test2json.
Fixes#22710.
Fixes#22789.
Change-Id: I3d850c8a2288be7f9a27d638bbf847cb8707dcce
Reviewed-on: https://go-review.googlesource.com/81555
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
1. Apply JSON conversion when -bench is in use.
2. Apply JSON conversion to "no test files" result.
3. Apply JSON conversion to test case-ending SKIP status.
Fixes#22769.
Fixes#22790.
Change-Id: I67ad656fc58bacae8c51d23b1e6d543cad190f08
Reviewed-on: https://go-review.googlesource.com/81535
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The cover variable indices could vary from build to build,
but they were not included in the build ID hash, so that
reusing the previously built package was not safe.
Make the indices no longer vary from build to build,
so that caching is safe.
Fixes#22652.
Change-Id: Ie26d73c648aadd285f97e0bf39619cabc3da54f2
Reviewed-on: https://go-review.googlesource.com/81515
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For Go 1.10, works around a go/types bug that can't typecheck
a corner-case type cycle. Once we are confident that bugs like
this are gone from go/types then we can stop ignoring these
failures.
For #22890.
Change-Id: I38da57e01a0636323e1af4484c30871786125df3
Reviewed-on: https://go-review.googlesource.com/81500
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Earlier versions of Go were not very picky about leading spaces
in the -gcflags values. Make the new pattern-enhanced parser
equally lax.
Fixes#22943.
Change-Id: I5cf4d3e81412e895a4b52af325853ed48d0b73f4
Reviewed-on: https://go-review.googlesource.com/81498
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It's not safe to do p+x with unsafe if that would point past the
end of the object. (Valid in C, not safe in Go.)
Pass a "whySafe" reason (compiled away) to explain at each
call site why it's safe.
Fixes#21733.
Change-Id: I5da8c25bde66f5c9beac232f2135dcab8e8bf3b1
Reviewed-on: https://go-review.googlesource.com/80738
Reviewed-by: Austin Clements <austin@google.com>
The number of threads in syscall presented by execution tracer's
trace view includes not only the threads calling system calls on behalf
of user created goroutines, but also those running on behalf of system
goroutines.
When the number of such system goroutines was small, the graph was
useful when examining where a program was saturating the CPU.
But as more and more system goroutines are invloved the graph became
less useful for the purpose - for example, after golang.org/cl/34784,
the timer goroutines dominate in the graph with large P
because the runtime creates per-P timer goroutines.
This change excludes the threads in syscall on behalf of runtime (system
goroutines) from the visualization. Alternatively, I could visualize the
count of such threads in a separate counter but in the same graph.
Given that many other debug endpoints (e.g. /debug/pprof/goroutine) hide
the system goroutines, including them in the same graph can confuse users.
Update #22574
Change-Id: If758cd6b9ed0596fde9a471e846b93246580b9d5
Reviewed-on: https://go-review.googlesource.com/81315
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Minor.
Makes reading failing runtime test stacktraces easier (by having fewer
goroutines to read) on machines where these gdb tests wouldn't have
ever run anyway.
Change-Id: I3fab0667e017f20ef3bf96a8cc4cfcc614d25b5c
Reviewed-on: https://go-review.googlesource.com/81575
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This adds logging for the expected duration of a growStack, plus
progress information on the growStack that timed out.
Updates #19381.
Change-Id: Ic358f8350f499ff22dd213b658aece7d1aa62675
Reviewed-on: https://go-review.googlesource.com/81556
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Per the decision for #14844, index expressions that are non-constant
shifts where the LHS operand is representable as an int are now valid.
Fixes#21693.
Change-Id: Ifafad2c0c65975e0200ce7e28d1db210e0eacd9d
Reviewed-on: https://go-review.googlesource.com/81277
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
