This cuts 6 seconds off all.bash with the new go command.
Not a ton, but also an easy 6 seconds to grab.
The -tags=use_go_run in the misc/cgo tests is just some
go command flag that will make run.go use go run,
but without making everything look stale.
(Those tests have relative imports,
so go tool compile+link is not enough.)
Change-Id: I43bf4bb661d3adde2b2d4aad5e8f64b97bc69ba9
Reviewed-on: https://go-review.googlesource.com/73994
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL changes the go command to base all its rebuilding decisions
on the content of the files being processed and not their file system
modification times. It also eliminates the special handling of release
toolchains, which were previously considered always up-to-date
because modification time order could not be trusted when unpacking
a pre-built release.
The go command previously tracked "build IDs" as a backup to
modification times, to catch changes not reflected in modification times.
For example, if you remove one .go file in a package with multiple .go
files, there is no modification time remaining in the system that indicates
that the installed package is out of date. The old build ID was the hash
of a list of file names and a few other factors, expected to change if
those factors changed.
This CL moves to using this kind of build ID as the only way to
detect staleness, making sure that the build ID hash includes all
possible factors that need to influence the rebuild decision.
One such factor is the compiler flags. As of this CL, if you run
go build -gcflags -N cmd/gofmt
you will get a gofmt where every package is built with -N,
regardless of what may or may not be installed already.
Another such factor is the linker flags. As of this CL, if you run
go install myprog
go install -ldflags=-s myprog
the second go install will now correctly build a new myprog with
the updated linker flags. (Previously the installed myprog appeared
up-to-date, because the ldflags were not included in the build ID.)
Because we have more precise information we can also validate whether
the target of a "go test -c" operation is already the right binary and
therefore can avoid a rebuild.
This CL sets us up for having a more general build artifact cache,
maybe even a step toward not having a pkg directory with .a files,
but this CL does not take that step. For now the result of go install
is the same as it ever was; we just do a better job of what needs to
be installed.
This CL does slow down builds a small amount by reading all the
dependent source files in full. (The go command already read the
beginning of every dependent source file to discover build tags
and imports.) On my MacBook Pro, before this CL all.bash takes
3m58s, while after this CL and a few optimizations stacked above it
all.bash takes 4m28s. Given that CL 73850 cut 1m43s off the all.bash
time earlier today, we can afford adding 30s back for now.
More optimizations are planned that should make the go command
more efficient than it was even before this CL.
Fixes#15799.
Fixes#18369.
Fixes#19340.
Fixes#21477.
Change-Id: I10d7ca0e31ca3f58aabb9b1f11e2e3d9d18f0bc9
Reviewed-on: https://go-review.googlesource.com/73212
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The upcoming CL 73212 will see through mtime modifications.
Change the underlying file too.
Change-Id: Ib23b4136a62ee87bce408b76bb0385451ae7dcd2
Reviewed-on: https://go-review.googlesource.com/74130
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Both the linker and the plugin package were inconsistent
about when they applied the path encoding defined in
objabi.PathToPrefix. As a result, only some symbols from
a package path that required encoding were being found.
So always encoding the path.
Fixes#22295
Change-Id: Ife86c79ca20b2e9307008ed83885e193d32b7dc4
Reviewed-on: https://go-review.googlesource.com/72390
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Running test.bash goes from 30s to 10s on a linux workstation.
(The coming pkg cache work in cmd/go would presumably do the same thing,
but this makes all.bash faster today.)
Change-Id: I8c9b0400071a412fce55b386e939906bb1c1d84d
Reviewed-on: https://go-review.googlesource.com/72330
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Previously, cover printed directives (//go: comments) near the top of
the file unless they were in doc comments. However, directives
frequently apply to specific definitions, and they are not written in
doc comments to prevent godoc from printing them. Moving all
directives to the top of the file affected semantics of tests.
With this change, directives are kept together with the following
top-level declarations. Only directives that occur after all top-level
declarations are moved.
Fixes#22022
Change-Id: Ic5c61c4d3969996e4ed5abccba0989163789254c
Reviewed-on: https://go-review.googlesource.com/69630
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
Currently we look to see if the main.main symbol address is in the
module data text range. This requires access to the main.main
symbol, which usually the runtime has, but does not when building
a plugin.
To avoid a dynamic relocation to main.main (which I haven't worked
out how to have the linker generate on darwin), stop using the
symbol. Instead record a boolean in the moduledata if the module
has the main function.
Fixes#22175
Change-Id: If313a118f17ab499d0a760bbc2519771ed654530
Reviewed-on: https://go-review.googlesource.com/69370
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Starting in gcc 6, -pie is passed to the linker by default
on some platforms, including ppc64le. If the objects
being linked are not built for -pie then in some cases the
executable could be in error. To avoid that problem, -no-pie
should be used with gcc to override the default -pie option
and generate a correct executable that can be run without error.
Fixes#22126
Change-Id: I4a052bba8b9b3bd6706f5d27ca9a7cebcb504c95
Reviewed-on: https://go-review.googlesource.com/70072
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL does a few things.
1. It moves the existing "read a build ID" code out of the go command
and into cmd/internal/buildid.
2. It adds new code there to "write a build ID".
3. It adds better tests.
4. It encapsulates cmd/internal/buildid into a new standalone program
"go tool buildid".
The go command is going to use the new "write a build ID" functionality
in a future CL. Adding the separate "go tool buildid" gives "go build -x"
a printable command to explain what it is doing in that new step.
(This is similar to the go command printing "go tool pack" commands
equivalent to the actions it is taking, even though it's not invoking pack
directly.) Keeping go build -x honest means that other build systems can
potentially keep up with the go command.
Change-Id: I01c0a66e30a80fa7254e3f2879283d3cd7aa03b4
Reviewed-on: https://go-review.googlesource.com/69053
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Everything got a bit tangled together in b.action1.
Try to tease things apart again.
In general this is a refactoring of the existing code, with limited
changes to the effect of the code.
The main additional change is to complete a.Deps for link actions.
That list now directly contains all the inputs the linker will attempt
to read, eliminating the need for a transitive traversal of the entire
action graph to find those. The comepleteness of a.Deps will be
important when we eventually use it to decide whether an cached
action output can be reused.
all.bash passes, but it's possible I've broken some subtety of
buildmode=shared again. Certainly that code took the longest
to get working.
Change-Id: I34e849eda446dca45a9cfce02b07bec6edb6d0d4
Reviewed-on: https://go-review.googlesource.com/69831
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Updates #11058
Change-Id: I2a8bf4403b680ab8bf06fff18291f3bf67261e27
Reviewed-on: https://go-review.googlesource.com/69090
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Otherwise we end up with testp?.exe files after the tests run.
Updates #11058
Change-Id: Ieccfc42da6192622bdab1f9a411ccd50bb59fd5b
Reviewed-on: https://go-review.googlesource.com/68770
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TestUnexportedSymbols requires dup2 that
my gcc installation does not have.
TestSignalHandlersWithNotify fails with:
undefined: syscall.SIGIO.
TestSignalHandlers fails with:
sched.h: No such file or directory.
TestExportedSymbolsWithDynamicLoad fails with:
dlfcn.h: No such file or directory.
Also add t.Helper calls to better error messages.
Updates #11058
Change-Id: I7eb514968464256b8337e45f57fcb7d7fe0e4693
Reviewed-on: https://go-review.googlesource.com/68410
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Moves type symbol name mangling out of the object reader
and into a separate pass. Requires some care, as changing
the name of a type may require dealing with duplicate
symbols for the first time.
Disables DWARF for both plugins and programs that use plugin.Open,
because type manging is currently incompatible with the go.info.*
symbol generator in cmd/link. (It relies on the symbol names to
find type information.) A future fix for this would be moving the
go.info.* generation into the compiler, with the logic we use
for generating the type.* symbols.
Fixes#19529
Change-Id: I75615f8bdda86ff9e767e536d9aa36e15c194098
Reviewed-on: https://go-review.googlesource.com/67312
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The lldb child process is killed if a test runs too long. Also
kill it when the setup times out (and is retried).
Might help with builder flakes where all 5 attempts to start up
lldb fail even though the tests before and after the timeouts
succeed. For example:
...
ok vendor/golang_org/x/net/route 37.797s
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
go_darwin_arm_exec: failed to start test harness (retry attempted)
FAIL vendor/golang_org/x/text/transform 115.185s
ok vendor/golang_org/x/text/unicode/norm 122.773s
...
Change-Id: I6638860522896491dccfa12f1e520c0f23df6d66
Reviewed-on: https://go-review.googlesource.com/67791
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is a step toward using cached build artifacts: the importcfg
will direct the compiler and linker to read them right from the cache
if necessary. However, this CL does not have a cache yet, so it still
reads them from the usual install location or build location.
Even so, this fixes a long-standing issue that -I and -L (no longer used)
are not expressive enough to describe complex GOPATH setups.
Shared libraries are handled enough that all.bash passes, but
there may still be more work to do here. If so, tests and fixes
can be added in follow-up CLs.
Gccgo will need updating to support -importcfg as well.
Fixes#14271.
Change-Id: I5c52a0a5df0ffbf7436e1130c74e9e24fceff80f
Reviewed-on: https://go-review.googlesource.com/56279
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When rewriting loads and stores accessing global variables to use the
GOT we were making use of REGTMP (R10). Unfortunately loads and stores
with large offsets (larger than 20-bits) were also using REGTMP,
causing it to be clobbered and subsequently a segmentation fault.
This can be fixed by using REGTMP2 (R11) for the rewrite. This is fine
because REGTMP2 only has a couple of uses in the assembler (division,
high multiplication and storage-to-storage instructions). We didn't
use REGTMP2 originally because it used to be used more frequently,
in particular for stores of constants to memory. However we have now
eliminated those uses.
This was found while writing a test case for CL 63030. That test case
is included in this CL.
Change-Id: I13956f1f3ca258a7c8a7ff0a7570d2848adf7f68
Reviewed-on: https://go-review.googlesource.com/65011
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It's not needed, and the current expectation is that it will go away
in the future.
Change-Id: I5f46800e748d9ffa484bda6d1738290c8e00ac2b
Reviewed-on: https://go-review.googlesource.com/63751
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
rune has a well-defined size, but C.int is implementation-specified.
Using one as the other should require an explicit conversion.
updates #13467
Change-Id: I53ab2478427dca790efdcc197f6b8d9fbfbd1847
Reviewed-on: https://go-review.googlesource.com/63730
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I had passed 1 instead of 2 to the SplitAfterN call in
errorstest.check, so all of the cases were erroneously falling through
to the non-regexp case (and passing even if the actual error didn't
match).
Now, we use bytes.HasSuffix to check for the non-regexp case, so we
will not incorrectly match a regexp comment to the non-regexp case.
updates #13467
Change-Id: Ia6be928a495425f2b7bae5001bd01346e115dcfa
Reviewed-on: https://go-review.googlesource.com/63692
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This makes the test easier to run in isolation and easier to change,
and simplifies the code to run the tests in parallel.
updates #13467
Change-Id: I5622b5cc98276970347da18e95d071dbca3c5cc1
Reviewed-on: https://go-review.googlesource.com/63276
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Previously, test7978 failed if the user did not invoke it with
GOTRACEBACK=2 already set in their environment. Environment-sensitive
test are awkward, and in this case there is a very simple workaround:
set the traceback level to the necessary value explicitly.
Change-Id: I7d576f24138aa8a41392148eae11bbeaef558573
Reviewed-on: https://go-review.googlesource.com/63275
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 62593 broken TestExportedSymbols and TestUnexportedSymbols
because it started executing android test binary on host.
Make them run on android.
Hopefully fixes android build.
Change-Id: Ic0bb9f0cbbefca23828574282caa33a03ef72431
Reviewed-on: https://go-review.googlesource.com/62830
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Elias Naur <elias.naur@gmail.com>
Change-Id: Ib35bb7fc9c5b4ccc9b8e1bd16443e0b307be9406
Reviewed-on: https://go-review.googlesource.com/62593
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#21809
Change-Id: Ic43077c6bea3c7cdc9611e74abf07b6deab70433
Reviewed-on: https://go-review.googlesource.com/62670
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: Id1b5939cfcd210a0cb5f61915ce2d077c7fcec11
Reviewed-on: https://go-review.googlesource.com/62592
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The noopt builder sets GO_GCFLAGS when building the standard library.
Set it when building plugins to ensure the -shared packages built for it
have the same inlining in the export data (and thus the same package
version).
Tested locally with GO_GCFLAGS="-N -l" ./all.bash
Fixes#17937
Change-Id: Id037cfbf4af744c05c47bdc58eea60a5dba69533
Reviewed-on: https://go-review.googlesource.com/62511
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
1. remove broken verification
The runtime check assumes that no-pcln symbol entry have zero value,
but the linker emit no entries if the symbol is no-pcln.
As a result, if there are no-pcln symbols at the very end of pcln
table, it will panic.
2. correct condition of export
Handle special chracters in pluginpath correcty.
Export "go.itab.*", so different plugins can share the same itab.
Fixes#18190
Change-Id: Ia4f9c51d83ce8488a9470520f1ee9432802cfc1d
Reviewed-on: https://go-review.googlesource.com/61091
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Along the way, track bad modules. Make sure they don't end up on
the active modules list, and aren't accidentally reprocessed as
new plugins.
Fixes#19004
Change-Id: I8a5e7bb11f572f7b657a97d521a7f84822a35c07
Reviewed-on: https://go-review.googlesource.com/61171
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It is common to have multiple plugins built from ephemeral
source files all with the same name:
# generate main.go
go build -buildmode=plugin -o=p1.so main.go
# rm main.go, generate new main.go
go build -buildmode=plugin -o=p2.so main.go
...
These different plugins currently have the same build ID,
and hence the same package path. This means only one can be
loaded.
To remove this restriction, this commit adds the contents of the
main package source files to the plugin hash.
Fixes#19358
Change-Id: Icd42024b085feb29c09c2771aaecb85f8b528dd3
Reviewed-on: https://go-review.googlesource.com/61170
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When compiling a plugin, package main gets a new name so as not to
conflict with the main package in the host binary, or any other
plugins. It is already defined by cmd/go, and used by cmd/link when
filling out the "" package placeholder in symbols.
With this CL, the plugin-specific name for main is also passed to
cmd/compile's -p flag. This is used to fill out the pkgpath field
of types, and ensures that two types defined in two different plugin
mains with the same name will not be mistaken for one another at
runtime.
Fixes#21386
Change-Id: I8a646d8d7451caff533fe0007343ea8b8e1704ed
Reviewed-on: https://go-review.googlesource.com/60910
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The approach of https://golang.org/cl/43476 turned out incorrect.
The problem is that the sniff introduced by the CL only work for simple
expression. And when it fails it fallback to uint64, not int64, which
breaks backward compatibility.
In this CL, we use DWARF for guessing kind instead. That should be more
reliable than previous approach. And importanly, it fallbacks to int64 even
if it fails to guess kind.
Fixes#21708
Change-Id: I39a18cb2efbe4faa9becdcf53d5ac68dba180d46
Reviewed-on: https://go-review.googlesource.com/60510
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, cgo supports only macros which can be reduced to constants
or variables. The CL addresses remaining parts, macros which can be
represented as niladic functions.
The basic idea is simple:
1. make a thin wrapper function per macros.
2. replace macro expansions with function calls.
Fixes#10715Fixes#18720
Change-Id: I150b4fb48e9dc4cc34466ef6417c04ac93d4bc1a
Reviewed-on: https://go-review.googlesource.com/43970
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Current code uses names like "x" and "s" which can conflict with user's
code easily. Use cryptographic names.
Fixes#21668
Change-Id: Ib6d3d6327aa5b92d95c71503d42e3a79d96c8e15
Reviewed-on: https://go-review.googlesource.com/59710
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When running multiple iOS builds on the same host, GOIOS_DEVICE_ID
is used to distinguish the devices. To improve support,
- Only restart the particular device when invoking iostest.bash
with the -restart flag.
- Make the exec wrapper lock file per-device.
For the iOS builder.
Change-Id: Id6f222981f25036399a43c3202a393dba89d87cb
Reviewed-on: https://go-review.googlesource.com/57970
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Generated with
github.com/catapult/tracing/bin/vulcanize_trace_viewer
catapult @ ab4d571fa
Renamed trace_viewer_lean.html to trace_viewer_full.html
to make it clear we are using the full version of trace viewer
(waiting for https://github.com/catapult-project/catapult/issues/2247
to be fixed).
Update #15302
Change-Id: Ice808bb27ab79a1dec9fc863e0c5a761027ebfbe
Reviewed-on: https://go-review.googlesource.com/58750
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
If set, GOIOS_DEVICE_ID specifies the device id for the iOS exec
wrapper. With that, a single builder can host multiple iOS devices.
Change-Id: If3cc049552f5edbd7344befda7b8d7f73b4236e2
Reviewed-on: https://go-review.googlesource.com/57296
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: JBD <jbd@google.com>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
This reverts commit a6ffab6b67.
Reason for revert: with CL 57290 the tests run on Android again.
Change-Id: Ifeb29762a4cd0178463acfeeb3696884d99d2993
Reviewed-on: https://go-review.googlesource.com/57310
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
The testcshared test.bash was rewritten in Go, but the rewritten script
broke on Android. Make the tests run on Android again by:
- Restoring the LD_LIBRARY_PATH path (.).
- Restoring the Android specific C flags (-pie -fuse-ld=gold).
- Adding runExe to run test executables. All other commands must run on
the host.
Fixes#21513.
Change-Id: I3ea617a943c686b15437cc5c118e9802a913d93a
Reviewed-on: https://go-review.googlesource.com/57290
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Hopefully this will fix android build.
Maybe fixes#21513
Change-Id: I98f760562646f06b56e385c36927e79458465b92
Reviewed-on: https://go-review.googlesource.com/56790
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Another attempt to fix build
Change-Id: I26137c115ad4b5f5a69801ed981c146adf6e824c
Reviewed-on: https://go-review.googlesource.com/56750
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Hopefully fixes build.
Change-Id: If0629b95b923a65e4507073cf7aa44a5e178fc0f
Reviewed-on: https://go-review.googlesource.com/56711
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
