runtime: use RDTSCP for instruction stream serialized read of TSC

To measure all instructions having been completed before reading
the time stamp counter with RDTSC an instruction sequence that
has instruction stream serializing properties which guarantee
waiting until all previous instructions have been executed is
needed. This does not necessary mean to wait for all stores to
be globally visible.

This CL aims to remove vendor specific logic for determining the
instruction sequence with CPU feature flag checks that are
CPU vendor independent.

For intel LFENCE has the wanted properties at least
since it was introduced together with SSE2 support.

On AMD instruction stream serializing LFENCE is supported by setting
an MSR C001_1029[1]=1 on AMD family 10h/12h/14h/15h/16h/17h processors.
AMD family 0Fh/11h processors support LFENCE as serializing always.
AMD plans support for this MSR and access to this bit for all future processors.
Source: https://developer.amd.com/wp-content/resources/Managing-Speculation-on-AMD-Processors.pdf

Reading the MSR to determine LFENCE properties is not always possible
or reliable (hypervisors). The Linux kernel is relying on serializing
LFENCE on AMD CPUs since a commit in July 2019: https://lkml.org/lkml/2019/7/22/295
and the MSR C001_1029 to enable serialization has been set by default
with the Spectre v1 mitigations.

Using an MFENCE on AMD is waiting on previous instructions having been executed
but in addition also flushes store buffers.

To align the serialization properties without runtime detection
of CPU manufacturers we can use the newer RDTSCP instruction which
waits until all previous instructions have been executed.

RDTSCP is available on Intel since around 2008 and on AMD CPUs since
around 2006. Support for RDTSCP can be checked independently
of manufacturer by checking CPUID bits.

Using RDTSCP is the default in Linux to read TSC in program order
when the instruction is available.
e22ce8eb63/arch/x86/include/asm/msr.h (L231)

Change-Id: Ifa841843b9abb2816f8f0754a163ebf01385306d
Reviewed-on: https://go-review.googlesource.com/c/go/+/344429
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Martin Möhrmann <martin@golang.org>
Run-TryBot: Martin Möhrmann <martin@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>

src/internal/cpu/cpu.go

@@ -36,6 +36,7 @@ var X86 struct {
 	HasOSXSAVE   bool
 	HasPCLMULQDQ bool
 	HasPOPCNT    bool
+	HasRDTSCP    bool
 	HasSSE2      bool
 	HasSSE3      bool
 	HasSSSE3     bool

src/internal/cpu/cpu_x86.go

@@ -37,6 +37,9 @@ const (
 	cpuid_BMI2 = 1 << 8
 	cpuid_ERMS = 1 << 9
 	cpuid_ADX  = 1 << 19
+
+	// edx bits for CPUID 0x80000001
+	cpuid_RDTSCP = 1 << 27
 )
 
 var maxExtendedFunctionInformation uint32
@@ -53,6 +56,7 @@ func doinit() {
 		{Name: "fma", Feature: &X86.HasFMA},
 		{Name: "pclmulqdq", Feature: &X86.HasPCLMULQDQ},
 		{Name: "popcnt", Feature: &X86.HasPOPCNT},
+		{Name: "rdtscp", Feature: &X86.HasRDTSCP},
 		{Name: "sse3", Feature: &X86.HasSSE3},
 		{Name: "sse41", Feature: &X86.HasSSE41},
 		{Name: "sse42", Feature: &X86.HasSSE42},
@@ -112,6 +116,16 @@ func doinit() {
 	X86.HasBMI2 = isSet(ebx7, cpuid_BMI2)
 	X86.HasERMS = isSet(ebx7, cpuid_ERMS)
 	X86.HasADX = isSet(ebx7, cpuid_ADX)
+
+	var maxExtendedInformation uint32
+	maxExtendedInformation, _, _, _ = cpuid(0x80000000, 0)
+
+	if maxExtendedInformation < 0x80000001 {
+		return
+	}
+
+	_, _, _, edxExt1 := cpuid(0x80000001, 0)
+	X86.HasRDTSCP = isSet(edxExt1, cpuid_RDTSCP)
 }
 
 func isSet(hwc uint32, value uint32) bool {

src/runtime/asm_386.s

@@ -137,9 +137,6 @@ has_cpuid:
 	CMPL	AX, $0
 	JE	nocpuinfo
 
-	// Figure out how to serialize RDTSC.
-	// On Intel processors LFENCE is enough. AMD requires MFENCE.
-	// Don't know about the rest, so let's do MFENCE.
 	CMPL	BX, $0x756E6547  // "Genu"
 	JNE	notintel
 	CMPL	DX, $0x49656E69  // "ineI"
@@ -147,7 +144,6 @@ has_cpuid:
 	CMPL	CX, $0x6C65746E  // "ntel"
 	JNE	notintel
 	MOVB	$1, runtime·isIntel(SB)
-	MOVB	$1, runtime·lfenceBeforeRdtsc(SB)
 notintel:
 
 	// Load EAX=1 cpuid flags
@@ -838,19 +834,36 @@ TEXT runtime·stackcheck(SB), NOSPLIT, $0-0
 
 // func cputicks() int64
 TEXT runtime·cputicks(SB),NOSPLIT,$0-8
+	// LFENCE/MFENCE instruction support is dependent on SSE2.
+	// When no SSE2 support is present do not enforce any serialization
+	// since using CPUID to serialize the instruction stream is
+	// very costly.
 	CMPB	internal∕cpu·X86+const_offsetX86HasSSE2(SB), $1
-	JNE	done
-	CMPB	runtime·lfenceBeforeRdtsc(SB), $1
-	JNE	mfence
-	LFENCE
-	JMP	done
-mfence:
-	MFENCE
+	JNE	rdtsc
+	CMPB	internal∕cpu·X86+const_offsetX86HasRDTSCP(SB), $1
+	JNE	fences
+	// Instruction stream serializing RDTSCP is supported.
+	// RDTSCP is supported by Intel Nehalem (2008) and
+	// AMD K8 Rev. F (2006) and newer.
+	RDTSCP
 done:
-	RDTSC
 	MOVL	AX, ret_lo+0(FP)
 	MOVL	DX, ret_hi+4(FP)
 	RET
+fences:
+	// MFENCE is instruction stream serializing and flushes the
+	// store buffers on AMD. The serialization semantics of LFENCE on AMD
+	// are dependent on MSR C001_1029 and CPU generation.
+	// LFENCE on Intel does wait for all previous instructions to have executed.
+	// Intel recommends MFENCE;LFENCE in its manuals before RDTSC to have all
+	// previous instructions executed and all previous loads and stores to globally visible.
+	// Using MFENCE;LFENCE here aligns the serializing properties without
+	// runtime detection of CPU manufacturer.
+	MFENCE
+	LFENCE
+rdtsc:
+	RDTSC
+	JMP done
 
 TEXT ldt0setup<>(SB),NOSPLIT,$16-0
 	// set up ldt 7 to point at m0.tls

src/runtime/asm_amd64.s

@@ -103,9 +103,6 @@ TEXT runtime·rt0_go(SB),NOSPLIT|TOPFRAME,$0
 	CMPL	AX, $0
 	JE	nocpuinfo
 
-	// Figure out how to serialize RDTSC.
-	// On Intel processors LFENCE is enough. AMD requires MFENCE.
-	// Don't know about the rest, so let's do MFENCE.
 	CMPL	BX, $0x756E6547  // "Genu"
 	JNE	notintel
 	CMPL	DX, $0x49656E69  // "ineI"
@@ -113,7 +110,6 @@ TEXT runtime·rt0_go(SB),NOSPLIT|TOPFRAME,$0
 	CMPL	CX, $0x6C65746E  // "ntel"
 	JNE	notintel
 	MOVB	$1, runtime·isIntel(SB)
-	MOVB	$1, runtime·lfenceBeforeRdtsc(SB)
 notintel:
 
 	// Load EAX=1 cpuid flags
@@ -928,18 +924,30 @@ TEXT runtime·stackcheck(SB), NOSPLIT, $0-0
 
 // func cputicks() int64
 TEXT runtime·cputicks(SB),NOSPLIT,$0-0
-	CMPB	runtime·lfenceBeforeRdtsc(SB), $1
-	JNE	mfence
-	LFENCE
-	JMP	done
-mfence:
-	MFENCE
+	CMPB	internal∕cpu·X86+const_offsetX86HasRDTSCP(SB), $1
+	JNE	fences
+	// Instruction stream serializing RDTSCP is supported.
+	// RDTSCP is supported by Intel Nehalem (2008) and
+	// AMD K8 Rev. F (2006) and newer.
+	RDTSCP
 done:
-	RDTSC
 	SHLQ	$32, DX
 	ADDQ	DX, AX
 	MOVQ	AX, ret+0(FP)
 	RET
+fences:
+	// MFENCE is instruction stream serializing and flushes the
+	// store buffers on AMD. The serialization semantics of LFENCE on AMD
+	// are dependent on MSR C001_1029 and CPU generation.
+	// LFENCE on Intel does wait for all previous instructions to have executed.
+	// Intel recommends MFENCE;LFENCE in its manuals before RDTSC to have all
+	// previous instructions executed and all previous loads and stores to globally visible.
+	// Using MFENCE;LFENCE here aligns the serializing properties without
+	// runtime detection of CPU manufacturer.
+	MFENCE
+	LFENCE
+	RDTSC
+	JMP done
 
 // func memhash(p unsafe.Pointer, h, s uintptr) uintptr
 // hash function using AES hardware instructions

src/runtime/cpuflags.go

@@ -11,10 +11,11 @@ import (
 
 // Offsets into internal/cpu records for use in assembly.
 const (
-	offsetX86HasAVX  = unsafe.Offsetof(cpu.X86.HasAVX)
-	offsetX86HasAVX2 = unsafe.Offsetof(cpu.X86.HasAVX2)
-	offsetX86HasERMS = unsafe.Offsetof(cpu.X86.HasERMS)
-	offsetX86HasSSE2 = unsafe.Offsetof(cpu.X86.HasSSE2)
+	offsetX86HasAVX    = unsafe.Offsetof(cpu.X86.HasAVX)
+	offsetX86HasAVX2   = unsafe.Offsetof(cpu.X86.HasAVX2)
+	offsetX86HasERMS   = unsafe.Offsetof(cpu.X86.HasERMS)
+	offsetX86HasRDTSCP = unsafe.Offsetof(cpu.X86.HasRDTSCP)
+	offsetX86HasSSE2   = unsafe.Offsetof(cpu.X86.HasSSE2)
 
 	offsetARMHasIDIVA = unsafe.Offsetof(cpu.ARM.HasIDIVA)
 

src/runtime/runtime2.go

@@ -1128,7 +1128,6 @@ var (
 	// Set on startup in asm_{386,amd64}.s
 	processorVersionInfo uint32
 	isIntel              bool
-	lfenceBeforeRdtsc    bool
 
 	goarm uint8 // set by cmd/link on arm systems
 )