1
0
mirror of https://github.com/golang/go synced 2024-11-13 20:30:27 -07:00
go/misc/cgo/test/issue1435.go

185 lines
6.5 KiB
Go
Raw Normal View History

syscall: support POSIX semantics for Linux syscalls This change adds two new methods for invoking system calls under Linux: syscall.AllThreadsSyscall() and syscall.AllThreadsSyscall6(). These system call wrappers ensure that all OSThreads mirror a common system call. The wrappers serialize execution of the runtime to ensure no race conditions where any Go code observes a non-atomic OS state change. As such, the syscalls have higher runtime overhead than regular system calls, and only need to be used where such thread (or 'm' in the parlance of the runtime sources) consistency is required. The new support is used to enable these functions under Linux: syscall.Setegid(), syscall.Seteuid(), syscall.Setgroups(), syscall.Setgid(), syscall.Setregid(), syscall.Setreuid(), syscall.Setresgid(), syscall.Setresuid() and syscall.Setuid(). They work identically to their glibc counterparts. Extensive discussion of the background issue addressed in this patch can be found here: https://github.com/golang/go/issues/1435 In the case where cgo is used, the C runtime can launch pthreads that are not managed by the Go runtime. As such, the added syscall.AllThreadsSyscall*() return ENOTSUP when cgo is enabled. However, for the 9 syscall.Set*() functions listed above, when cgo is active, these functions redirect to invoke their C.set*() equivalents in glibc, which wraps the raw system calls with a nptl:setxid fixup mechanism. This achieves POSIX semantics for these functions in the combined Go and C runtime. As a side note, the glibc/nptl:setxid support (2019-11-30) does not extend to all security related system calls under Linux so using native Go (CGO_ENABLED=0) and these AllThreadsSyscall*()s, where needed, will yield more well defined/consistent behavior over all threads of a Go program. That is, using the syscall.AllThreadsSyscall*() wrappers for things like setting state through SYS_PRCTL and SYS_CAPSET etc. Fixes #1435 Change-Id: Ib1a3e16b9180f64223196a32fc0f9dce14d9105c Reviewed-on: https://go-review.googlesource.com/c/go/+/210639 Trust: Emmanuel Odeke <emm.odeke@gmail.com> Trust: Ian Lance Taylor <iant@golang.org> Trust: Michael Pratt <mpratt@google.com> Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> Reviewed-by: Michael Pratt <mpratt@google.com> Reviewed-by: Austin Clements <austin@google.com>
2019-12-09 22:50:16 -07:00
// Copyright 2019 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// +build linux,cgo
package cgotest
import (
"fmt"
"io/ioutil"
"strings"
"syscall"
"testing"
)
// #include <stdio.h>
// #include <stdlib.h>
// #include <pthread.h>
// #include <unistd.h>
// #include <sys/types.h>
//
// pthread_t *t = NULL;
// pthread_mutex_t mu;
// int nts = 0;
// int all_done = 0;
//
// static void *aFn(void *vargp) {
// int done = 0;
// while (!done) {
// usleep(100);
// pthread_mutex_lock(&mu);
// done = all_done;
// pthread_mutex_unlock(&mu);
// }
// return NULL;
// }
//
// void trial(int argc) {
// int i;
// nts = argc;
// t = calloc(nts, sizeof(pthread_t));
// pthread_mutex_init(&mu, NULL);
// for (i = 0; i < nts; i++) {
// pthread_create(&t[i], NULL, aFn, NULL);
// }
// }
//
// void cleanup(void) {
// int i;
// pthread_mutex_lock(&mu);
// all_done = 1;
// pthread_mutex_unlock(&mu);
// for (i = 0; i < nts; i++) {
// pthread_join(t[i], NULL);
// }
// pthread_mutex_destroy(&mu);
// free(t);
// }
import "C"
// compareStatus is used to confirm the contents of the thread
// specific status files match expectations.
func compareStatus(filter, expect string) error {
expected := filter + expect
syscall: support POSIX semantics for Linux syscalls This change adds two new methods for invoking system calls under Linux: syscall.AllThreadsSyscall() and syscall.AllThreadsSyscall6(). These system call wrappers ensure that all OSThreads mirror a common system call. The wrappers serialize execution of the runtime to ensure no race conditions where any Go code observes a non-atomic OS state change. As such, the syscalls have higher runtime overhead than regular system calls, and only need to be used where such thread (or 'm' in the parlance of the runtime sources) consistency is required. The new support is used to enable these functions under Linux: syscall.Setegid(), syscall.Seteuid(), syscall.Setgroups(), syscall.Setgid(), syscall.Setregid(), syscall.Setreuid(), syscall.Setresgid(), syscall.Setresuid() and syscall.Setuid(). They work identically to their glibc counterparts. Extensive discussion of the background issue addressed in this patch can be found here: https://github.com/golang/go/issues/1435 In the case where cgo is used, the C runtime can launch pthreads that are not managed by the Go runtime. As such, the added syscall.AllThreadsSyscall*() return ENOTSUP when cgo is enabled. However, for the 9 syscall.Set*() functions listed above, when cgo is active, these functions redirect to invoke their C.set*() equivalents in glibc, which wraps the raw system calls with a nptl:setxid fixup mechanism. This achieves POSIX semantics for these functions in the combined Go and C runtime. As a side note, the glibc/nptl:setxid support (2019-11-30) does not extend to all security related system calls under Linux so using native Go (CGO_ENABLED=0) and these AllThreadsSyscall*()s, where needed, will yield more well defined/consistent behavior over all threads of a Go program. That is, using the syscall.AllThreadsSyscall*() wrappers for things like setting state through SYS_PRCTL and SYS_CAPSET etc. Fixes #1435 Change-Id: Ib1a3e16b9180f64223196a32fc0f9dce14d9105c Reviewed-on: https://go-review.googlesource.com/c/go/+/210639 Trust: Emmanuel Odeke <emm.odeke@gmail.com> Trust: Ian Lance Taylor <iant@golang.org> Trust: Michael Pratt <mpratt@google.com> Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> Reviewed-by: Michael Pratt <mpratt@google.com> Reviewed-by: Austin Clements <austin@google.com>
2019-12-09 22:50:16 -07:00
pid := syscall.Getpid()
fs, err := ioutil.ReadDir(fmt.Sprintf("/proc/%d/task", pid))
if err != nil {
return fmt.Errorf("unable to find %d tasks: %v", pid, err)
}
expectedProc := fmt.Sprintf("Pid:\t%d", pid)
foundAThread := false
syscall: support POSIX semantics for Linux syscalls This change adds two new methods for invoking system calls under Linux: syscall.AllThreadsSyscall() and syscall.AllThreadsSyscall6(). These system call wrappers ensure that all OSThreads mirror a common system call. The wrappers serialize execution of the runtime to ensure no race conditions where any Go code observes a non-atomic OS state change. As such, the syscalls have higher runtime overhead than regular system calls, and only need to be used where such thread (or 'm' in the parlance of the runtime sources) consistency is required. The new support is used to enable these functions under Linux: syscall.Setegid(), syscall.Seteuid(), syscall.Setgroups(), syscall.Setgid(), syscall.Setregid(), syscall.Setreuid(), syscall.Setresgid(), syscall.Setresuid() and syscall.Setuid(). They work identically to their glibc counterparts. Extensive discussion of the background issue addressed in this patch can be found here: https://github.com/golang/go/issues/1435 In the case where cgo is used, the C runtime can launch pthreads that are not managed by the Go runtime. As such, the added syscall.AllThreadsSyscall*() return ENOTSUP when cgo is enabled. However, for the 9 syscall.Set*() functions listed above, when cgo is active, these functions redirect to invoke their C.set*() equivalents in glibc, which wraps the raw system calls with a nptl:setxid fixup mechanism. This achieves POSIX semantics for these functions in the combined Go and C runtime. As a side note, the glibc/nptl:setxid support (2019-11-30) does not extend to all security related system calls under Linux so using native Go (CGO_ENABLED=0) and these AllThreadsSyscall*()s, where needed, will yield more well defined/consistent behavior over all threads of a Go program. That is, using the syscall.AllThreadsSyscall*() wrappers for things like setting state through SYS_PRCTL and SYS_CAPSET etc. Fixes #1435 Change-Id: Ib1a3e16b9180f64223196a32fc0f9dce14d9105c Reviewed-on: https://go-review.googlesource.com/c/go/+/210639 Trust: Emmanuel Odeke <emm.odeke@gmail.com> Trust: Ian Lance Taylor <iant@golang.org> Trust: Michael Pratt <mpratt@google.com> Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> Reviewed-by: Michael Pratt <mpratt@google.com> Reviewed-by: Austin Clements <austin@google.com>
2019-12-09 22:50:16 -07:00
for _, f := range fs {
tf := fmt.Sprintf("/proc/%s/status", f.Name())
d, err := ioutil.ReadFile(tf)
if err != nil {
// There are a surprising number of ways this
// can error out on linux. We've seen all of
// the following, so treat any error here as
// equivalent to the "process is gone":
// os.IsNotExist(err),
// "... : no such process",
// "... : bad file descriptor.
continue
syscall: support POSIX semantics for Linux syscalls This change adds two new methods for invoking system calls under Linux: syscall.AllThreadsSyscall() and syscall.AllThreadsSyscall6(). These system call wrappers ensure that all OSThreads mirror a common system call. The wrappers serialize execution of the runtime to ensure no race conditions where any Go code observes a non-atomic OS state change. As such, the syscalls have higher runtime overhead than regular system calls, and only need to be used where such thread (or 'm' in the parlance of the runtime sources) consistency is required. The new support is used to enable these functions under Linux: syscall.Setegid(), syscall.Seteuid(), syscall.Setgroups(), syscall.Setgid(), syscall.Setregid(), syscall.Setreuid(), syscall.Setresgid(), syscall.Setresuid() and syscall.Setuid(). They work identically to their glibc counterparts. Extensive discussion of the background issue addressed in this patch can be found here: https://github.com/golang/go/issues/1435 In the case where cgo is used, the C runtime can launch pthreads that are not managed by the Go runtime. As such, the added syscall.AllThreadsSyscall*() return ENOTSUP when cgo is enabled. However, for the 9 syscall.Set*() functions listed above, when cgo is active, these functions redirect to invoke their C.set*() equivalents in glibc, which wraps the raw system calls with a nptl:setxid fixup mechanism. This achieves POSIX semantics for these functions in the combined Go and C runtime. As a side note, the glibc/nptl:setxid support (2019-11-30) does not extend to all security related system calls under Linux so using native Go (CGO_ENABLED=0) and these AllThreadsSyscall*()s, where needed, will yield more well defined/consistent behavior over all threads of a Go program. That is, using the syscall.AllThreadsSyscall*() wrappers for things like setting state through SYS_PRCTL and SYS_CAPSET etc. Fixes #1435 Change-Id: Ib1a3e16b9180f64223196a32fc0f9dce14d9105c Reviewed-on: https://go-review.googlesource.com/c/go/+/210639 Trust: Emmanuel Odeke <emm.odeke@gmail.com> Trust: Ian Lance Taylor <iant@golang.org> Trust: Michael Pratt <mpratt@google.com> Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> Reviewed-by: Michael Pratt <mpratt@google.com> Reviewed-by: Austin Clements <austin@google.com>
2019-12-09 22:50:16 -07:00
}
lines := strings.Split(string(d), "\n")
for _, line := range lines {
// Different kernel vintages pad differently.
line = strings.TrimSpace(line)
if strings.HasPrefix(line, "Pid:\t") {
// On loaded systems, it is possible
// for a TID to be reused really
// quickly. As such, we need to
// validate that the thread status
// info we just read is a task of the
// same process PID as we are
// currently running, and not a
// recently terminated thread
// resurfaced in a different process.
if line != expectedProc {
break
}
// Fall through in the unlikely case
// that filter at some point is
// "Pid:\t".
}
syscall: support POSIX semantics for Linux syscalls This change adds two new methods for invoking system calls under Linux: syscall.AllThreadsSyscall() and syscall.AllThreadsSyscall6(). These system call wrappers ensure that all OSThreads mirror a common system call. The wrappers serialize execution of the runtime to ensure no race conditions where any Go code observes a non-atomic OS state change. As such, the syscalls have higher runtime overhead than regular system calls, and only need to be used where such thread (or 'm' in the parlance of the runtime sources) consistency is required. The new support is used to enable these functions under Linux: syscall.Setegid(), syscall.Seteuid(), syscall.Setgroups(), syscall.Setgid(), syscall.Setregid(), syscall.Setreuid(), syscall.Setresgid(), syscall.Setresuid() and syscall.Setuid(). They work identically to their glibc counterparts. Extensive discussion of the background issue addressed in this patch can be found here: https://github.com/golang/go/issues/1435 In the case where cgo is used, the C runtime can launch pthreads that are not managed by the Go runtime. As such, the added syscall.AllThreadsSyscall*() return ENOTSUP when cgo is enabled. However, for the 9 syscall.Set*() functions listed above, when cgo is active, these functions redirect to invoke their C.set*() equivalents in glibc, which wraps the raw system calls with a nptl:setxid fixup mechanism. This achieves POSIX semantics for these functions in the combined Go and C runtime. As a side note, the glibc/nptl:setxid support (2019-11-30) does not extend to all security related system calls under Linux so using native Go (CGO_ENABLED=0) and these AllThreadsSyscall*()s, where needed, will yield more well defined/consistent behavior over all threads of a Go program. That is, using the syscall.AllThreadsSyscall*() wrappers for things like setting state through SYS_PRCTL and SYS_CAPSET etc. Fixes #1435 Change-Id: Ib1a3e16b9180f64223196a32fc0f9dce14d9105c Reviewed-on: https://go-review.googlesource.com/c/go/+/210639 Trust: Emmanuel Odeke <emm.odeke@gmail.com> Trust: Ian Lance Taylor <iant@golang.org> Trust: Michael Pratt <mpratt@google.com> Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> Reviewed-by: Michael Pratt <mpratt@google.com> Reviewed-by: Austin Clements <austin@google.com>
2019-12-09 22:50:16 -07:00
if strings.HasPrefix(line, filter) {
if line != expected {
return fmt.Errorf("%q got:%q want:%q (bad) [pid=%d file:'%s' %v]\n", tf, line, expected, pid, string(d), expectedProc)
syscall: support POSIX semantics for Linux syscalls This change adds two new methods for invoking system calls under Linux: syscall.AllThreadsSyscall() and syscall.AllThreadsSyscall6(). These system call wrappers ensure that all OSThreads mirror a common system call. The wrappers serialize execution of the runtime to ensure no race conditions where any Go code observes a non-atomic OS state change. As such, the syscalls have higher runtime overhead than regular system calls, and only need to be used where such thread (or 'm' in the parlance of the runtime sources) consistency is required. The new support is used to enable these functions under Linux: syscall.Setegid(), syscall.Seteuid(), syscall.Setgroups(), syscall.Setgid(), syscall.Setregid(), syscall.Setreuid(), syscall.Setresgid(), syscall.Setresuid() and syscall.Setuid(). They work identically to their glibc counterparts. Extensive discussion of the background issue addressed in this patch can be found here: https://github.com/golang/go/issues/1435 In the case where cgo is used, the C runtime can launch pthreads that are not managed by the Go runtime. As such, the added syscall.AllThreadsSyscall*() return ENOTSUP when cgo is enabled. However, for the 9 syscall.Set*() functions listed above, when cgo is active, these functions redirect to invoke their C.set*() equivalents in glibc, which wraps the raw system calls with a nptl:setxid fixup mechanism. This achieves POSIX semantics for these functions in the combined Go and C runtime. As a side note, the glibc/nptl:setxid support (2019-11-30) does not extend to all security related system calls under Linux so using native Go (CGO_ENABLED=0) and these AllThreadsSyscall*()s, where needed, will yield more well defined/consistent behavior over all threads of a Go program. That is, using the syscall.AllThreadsSyscall*() wrappers for things like setting state through SYS_PRCTL and SYS_CAPSET etc. Fixes #1435 Change-Id: Ib1a3e16b9180f64223196a32fc0f9dce14d9105c Reviewed-on: https://go-review.googlesource.com/c/go/+/210639 Trust: Emmanuel Odeke <emm.odeke@gmail.com> Trust: Ian Lance Taylor <iant@golang.org> Trust: Michael Pratt <mpratt@google.com> Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> Reviewed-by: Michael Pratt <mpratt@google.com> Reviewed-by: Austin Clements <austin@google.com>
2019-12-09 22:50:16 -07:00
}
foundAThread = true
syscall: support POSIX semantics for Linux syscalls This change adds two new methods for invoking system calls under Linux: syscall.AllThreadsSyscall() and syscall.AllThreadsSyscall6(). These system call wrappers ensure that all OSThreads mirror a common system call. The wrappers serialize execution of the runtime to ensure no race conditions where any Go code observes a non-atomic OS state change. As such, the syscalls have higher runtime overhead than regular system calls, and only need to be used where such thread (or 'm' in the parlance of the runtime sources) consistency is required. The new support is used to enable these functions under Linux: syscall.Setegid(), syscall.Seteuid(), syscall.Setgroups(), syscall.Setgid(), syscall.Setregid(), syscall.Setreuid(), syscall.Setresgid(), syscall.Setresuid() and syscall.Setuid(). They work identically to their glibc counterparts. Extensive discussion of the background issue addressed in this patch can be found here: https://github.com/golang/go/issues/1435 In the case where cgo is used, the C runtime can launch pthreads that are not managed by the Go runtime. As such, the added syscall.AllThreadsSyscall*() return ENOTSUP when cgo is enabled. However, for the 9 syscall.Set*() functions listed above, when cgo is active, these functions redirect to invoke their C.set*() equivalents in glibc, which wraps the raw system calls with a nptl:setxid fixup mechanism. This achieves POSIX semantics for these functions in the combined Go and C runtime. As a side note, the glibc/nptl:setxid support (2019-11-30) does not extend to all security related system calls under Linux so using native Go (CGO_ENABLED=0) and these AllThreadsSyscall*()s, where needed, will yield more well defined/consistent behavior over all threads of a Go program. That is, using the syscall.AllThreadsSyscall*() wrappers for things like setting state through SYS_PRCTL and SYS_CAPSET etc. Fixes #1435 Change-Id: Ib1a3e16b9180f64223196a32fc0f9dce14d9105c Reviewed-on: https://go-review.googlesource.com/c/go/+/210639 Trust: Emmanuel Odeke <emm.odeke@gmail.com> Trust: Ian Lance Taylor <iant@golang.org> Trust: Michael Pratt <mpratt@google.com> Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> Reviewed-by: Michael Pratt <mpratt@google.com> Reviewed-by: Austin Clements <austin@google.com>
2019-12-09 22:50:16 -07:00
break
}
}
}
if !foundAThread {
return fmt.Errorf("found no thread /proc/<TID>/status files for process %q", expectedProc)
}
syscall: support POSIX semantics for Linux syscalls This change adds two new methods for invoking system calls under Linux: syscall.AllThreadsSyscall() and syscall.AllThreadsSyscall6(). These system call wrappers ensure that all OSThreads mirror a common system call. The wrappers serialize execution of the runtime to ensure no race conditions where any Go code observes a non-atomic OS state change. As such, the syscalls have higher runtime overhead than regular system calls, and only need to be used where such thread (or 'm' in the parlance of the runtime sources) consistency is required. The new support is used to enable these functions under Linux: syscall.Setegid(), syscall.Seteuid(), syscall.Setgroups(), syscall.Setgid(), syscall.Setregid(), syscall.Setreuid(), syscall.Setresgid(), syscall.Setresuid() and syscall.Setuid(). They work identically to their glibc counterparts. Extensive discussion of the background issue addressed in this patch can be found here: https://github.com/golang/go/issues/1435 In the case where cgo is used, the C runtime can launch pthreads that are not managed by the Go runtime. As such, the added syscall.AllThreadsSyscall*() return ENOTSUP when cgo is enabled. However, for the 9 syscall.Set*() functions listed above, when cgo is active, these functions redirect to invoke their C.set*() equivalents in glibc, which wraps the raw system calls with a nptl:setxid fixup mechanism. This achieves POSIX semantics for these functions in the combined Go and C runtime. As a side note, the glibc/nptl:setxid support (2019-11-30) does not extend to all security related system calls under Linux so using native Go (CGO_ENABLED=0) and these AllThreadsSyscall*()s, where needed, will yield more well defined/consistent behavior over all threads of a Go program. That is, using the syscall.AllThreadsSyscall*() wrappers for things like setting state through SYS_PRCTL and SYS_CAPSET etc. Fixes #1435 Change-Id: Ib1a3e16b9180f64223196a32fc0f9dce14d9105c Reviewed-on: https://go-review.googlesource.com/c/go/+/210639 Trust: Emmanuel Odeke <emm.odeke@gmail.com> Trust: Ian Lance Taylor <iant@golang.org> Trust: Michael Pratt <mpratt@google.com> Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> Reviewed-by: Michael Pratt <mpratt@google.com> Reviewed-by: Austin Clements <austin@google.com>
2019-12-09 22:50:16 -07:00
return nil
}
// test1435 test 9 glibc implemented setuid/gid syscall functions are
// mapped. This test is a slightly more expansive test than that of
// src/syscall/syscall_linux_test.go:TestSetuidEtc() insofar as it
// launches concurrent threads from C code via CGo and validates that
// they are subject to the system calls being tested. For the actual
// Go functionality being tested here, the syscall_linux_test version
// is considered authoritative, but non-trivial improvements to that
// should be mirrored here.
func test1435(t *testing.T) {
if syscall.Getuid() != 0 {
t.Skip("skipping root only test")
}
// Launch some threads in C.
const cts = 5
C.trial(cts)
defer C.cleanup()
vs := []struct {
call string
fn func() error
filter, expect string
}{
{call: "Setegid(1)", fn: func() error { return syscall.Setegid(1) }, filter: "Gid:", expect: "\t0\t1\t0\t1"},
{call: "Setegid(0)", fn: func() error { return syscall.Setegid(0) }, filter: "Gid:", expect: "\t0\t0\t0\t0"},
syscall: support POSIX semantics for Linux syscalls This change adds two new methods for invoking system calls under Linux: syscall.AllThreadsSyscall() and syscall.AllThreadsSyscall6(). These system call wrappers ensure that all OSThreads mirror a common system call. The wrappers serialize execution of the runtime to ensure no race conditions where any Go code observes a non-atomic OS state change. As such, the syscalls have higher runtime overhead than regular system calls, and only need to be used where such thread (or 'm' in the parlance of the runtime sources) consistency is required. The new support is used to enable these functions under Linux: syscall.Setegid(), syscall.Seteuid(), syscall.Setgroups(), syscall.Setgid(), syscall.Setregid(), syscall.Setreuid(), syscall.Setresgid(), syscall.Setresuid() and syscall.Setuid(). They work identically to their glibc counterparts. Extensive discussion of the background issue addressed in this patch can be found here: https://github.com/golang/go/issues/1435 In the case where cgo is used, the C runtime can launch pthreads that are not managed by the Go runtime. As such, the added syscall.AllThreadsSyscall*() return ENOTSUP when cgo is enabled. However, for the 9 syscall.Set*() functions listed above, when cgo is active, these functions redirect to invoke their C.set*() equivalents in glibc, which wraps the raw system calls with a nptl:setxid fixup mechanism. This achieves POSIX semantics for these functions in the combined Go and C runtime. As a side note, the glibc/nptl:setxid support (2019-11-30) does not extend to all security related system calls under Linux so using native Go (CGO_ENABLED=0) and these AllThreadsSyscall*()s, where needed, will yield more well defined/consistent behavior over all threads of a Go program. That is, using the syscall.AllThreadsSyscall*() wrappers for things like setting state through SYS_PRCTL and SYS_CAPSET etc. Fixes #1435 Change-Id: Ib1a3e16b9180f64223196a32fc0f9dce14d9105c Reviewed-on: https://go-review.googlesource.com/c/go/+/210639 Trust: Emmanuel Odeke <emm.odeke@gmail.com> Trust: Ian Lance Taylor <iant@golang.org> Trust: Michael Pratt <mpratt@google.com> Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> Reviewed-by: Michael Pratt <mpratt@google.com> Reviewed-by: Austin Clements <austin@google.com>
2019-12-09 22:50:16 -07:00
{call: "Seteuid(1)", fn: func() error { return syscall.Seteuid(1) }, filter: "Uid:", expect: "\t0\t1\t0\t1"},
{call: "Setuid(0)", fn: func() error { return syscall.Setuid(0) }, filter: "Uid:", expect: "\t0\t0\t0\t0"},
syscall: support POSIX semantics for Linux syscalls This change adds two new methods for invoking system calls under Linux: syscall.AllThreadsSyscall() and syscall.AllThreadsSyscall6(). These system call wrappers ensure that all OSThreads mirror a common system call. The wrappers serialize execution of the runtime to ensure no race conditions where any Go code observes a non-atomic OS state change. As such, the syscalls have higher runtime overhead than regular system calls, and only need to be used where such thread (or 'm' in the parlance of the runtime sources) consistency is required. The new support is used to enable these functions under Linux: syscall.Setegid(), syscall.Seteuid(), syscall.Setgroups(), syscall.Setgid(), syscall.Setregid(), syscall.Setreuid(), syscall.Setresgid(), syscall.Setresuid() and syscall.Setuid(). They work identically to their glibc counterparts. Extensive discussion of the background issue addressed in this patch can be found here: https://github.com/golang/go/issues/1435 In the case where cgo is used, the C runtime can launch pthreads that are not managed by the Go runtime. As such, the added syscall.AllThreadsSyscall*() return ENOTSUP when cgo is enabled. However, for the 9 syscall.Set*() functions listed above, when cgo is active, these functions redirect to invoke their C.set*() equivalents in glibc, which wraps the raw system calls with a nptl:setxid fixup mechanism. This achieves POSIX semantics for these functions in the combined Go and C runtime. As a side note, the glibc/nptl:setxid support (2019-11-30) does not extend to all security related system calls under Linux so using native Go (CGO_ENABLED=0) and these AllThreadsSyscall*()s, where needed, will yield more well defined/consistent behavior over all threads of a Go program. That is, using the syscall.AllThreadsSyscall*() wrappers for things like setting state through SYS_PRCTL and SYS_CAPSET etc. Fixes #1435 Change-Id: Ib1a3e16b9180f64223196a32fc0f9dce14d9105c Reviewed-on: https://go-review.googlesource.com/c/go/+/210639 Trust: Emmanuel Odeke <emm.odeke@gmail.com> Trust: Ian Lance Taylor <iant@golang.org> Trust: Michael Pratt <mpratt@google.com> Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> Reviewed-by: Michael Pratt <mpratt@google.com> Reviewed-by: Austin Clements <austin@google.com>
2019-12-09 22:50:16 -07:00
{call: "Setgid(1)", fn: func() error { return syscall.Setgid(1) }, filter: "Gid:", expect: "\t1\t1\t1\t1"},
{call: "Setgid(0)", fn: func() error { return syscall.Setgid(0) }, filter: "Gid:", expect: "\t0\t0\t0\t0"},
syscall: support POSIX semantics for Linux syscalls This change adds two new methods for invoking system calls under Linux: syscall.AllThreadsSyscall() and syscall.AllThreadsSyscall6(). These system call wrappers ensure that all OSThreads mirror a common system call. The wrappers serialize execution of the runtime to ensure no race conditions where any Go code observes a non-atomic OS state change. As such, the syscalls have higher runtime overhead than regular system calls, and only need to be used where such thread (or 'm' in the parlance of the runtime sources) consistency is required. The new support is used to enable these functions under Linux: syscall.Setegid(), syscall.Seteuid(), syscall.Setgroups(), syscall.Setgid(), syscall.Setregid(), syscall.Setreuid(), syscall.Setresgid(), syscall.Setresuid() and syscall.Setuid(). They work identically to their glibc counterparts. Extensive discussion of the background issue addressed in this patch can be found here: https://github.com/golang/go/issues/1435 In the case where cgo is used, the C runtime can launch pthreads that are not managed by the Go runtime. As such, the added syscall.AllThreadsSyscall*() return ENOTSUP when cgo is enabled. However, for the 9 syscall.Set*() functions listed above, when cgo is active, these functions redirect to invoke their C.set*() equivalents in glibc, which wraps the raw system calls with a nptl:setxid fixup mechanism. This achieves POSIX semantics for these functions in the combined Go and C runtime. As a side note, the glibc/nptl:setxid support (2019-11-30) does not extend to all security related system calls under Linux so using native Go (CGO_ENABLED=0) and these AllThreadsSyscall*()s, where needed, will yield more well defined/consistent behavior over all threads of a Go program. That is, using the syscall.AllThreadsSyscall*() wrappers for things like setting state through SYS_PRCTL and SYS_CAPSET etc. Fixes #1435 Change-Id: Ib1a3e16b9180f64223196a32fc0f9dce14d9105c Reviewed-on: https://go-review.googlesource.com/c/go/+/210639 Trust: Emmanuel Odeke <emm.odeke@gmail.com> Trust: Ian Lance Taylor <iant@golang.org> Trust: Michael Pratt <mpratt@google.com> Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> Reviewed-by: Michael Pratt <mpratt@google.com> Reviewed-by: Austin Clements <austin@google.com>
2019-12-09 22:50:16 -07:00
{call: "Setgroups([]int{0,1,2,3})", fn: func() error { return syscall.Setgroups([]int{0, 1, 2, 3}) }, filter: "Groups:", expect: "\t0 1 2 3"},
{call: "Setgroups(nil)", fn: func() error { return syscall.Setgroups(nil) }, filter: "Groups:", expect: ""},
{call: "Setgroups([]int{0})", fn: func() error { return syscall.Setgroups([]int{0}) }, filter: "Groups:", expect: "\t0"},
syscall: support POSIX semantics for Linux syscalls This change adds two new methods for invoking system calls under Linux: syscall.AllThreadsSyscall() and syscall.AllThreadsSyscall6(). These system call wrappers ensure that all OSThreads mirror a common system call. The wrappers serialize execution of the runtime to ensure no race conditions where any Go code observes a non-atomic OS state change. As such, the syscalls have higher runtime overhead than regular system calls, and only need to be used where such thread (or 'm' in the parlance of the runtime sources) consistency is required. The new support is used to enable these functions under Linux: syscall.Setegid(), syscall.Seteuid(), syscall.Setgroups(), syscall.Setgid(), syscall.Setregid(), syscall.Setreuid(), syscall.Setresgid(), syscall.Setresuid() and syscall.Setuid(). They work identically to their glibc counterparts. Extensive discussion of the background issue addressed in this patch can be found here: https://github.com/golang/go/issues/1435 In the case where cgo is used, the C runtime can launch pthreads that are not managed by the Go runtime. As such, the added syscall.AllThreadsSyscall*() return ENOTSUP when cgo is enabled. However, for the 9 syscall.Set*() functions listed above, when cgo is active, these functions redirect to invoke their C.set*() equivalents in glibc, which wraps the raw system calls with a nptl:setxid fixup mechanism. This achieves POSIX semantics for these functions in the combined Go and C runtime. As a side note, the glibc/nptl:setxid support (2019-11-30) does not extend to all security related system calls under Linux so using native Go (CGO_ENABLED=0) and these AllThreadsSyscall*()s, where needed, will yield more well defined/consistent behavior over all threads of a Go program. That is, using the syscall.AllThreadsSyscall*() wrappers for things like setting state through SYS_PRCTL and SYS_CAPSET etc. Fixes #1435 Change-Id: Ib1a3e16b9180f64223196a32fc0f9dce14d9105c Reviewed-on: https://go-review.googlesource.com/c/go/+/210639 Trust: Emmanuel Odeke <emm.odeke@gmail.com> Trust: Ian Lance Taylor <iant@golang.org> Trust: Michael Pratt <mpratt@google.com> Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> Reviewed-by: Michael Pratt <mpratt@google.com> Reviewed-by: Austin Clements <austin@google.com>
2019-12-09 22:50:16 -07:00
{call: "Setregid(101,0)", fn: func() error { return syscall.Setregid(101, 0) }, filter: "Gid:", expect: "\t101\t0\t0\t0"},
{call: "Setregid(0,102)", fn: func() error { return syscall.Setregid(0, 102) }, filter: "Gid:", expect: "\t0\t102\t102\t102"},
{call: "Setregid(0,0)", fn: func() error { return syscall.Setregid(0, 0) }, filter: "Gid:", expect: "\t0\t0\t0\t0"},
syscall: support POSIX semantics for Linux syscalls This change adds two new methods for invoking system calls under Linux: syscall.AllThreadsSyscall() and syscall.AllThreadsSyscall6(). These system call wrappers ensure that all OSThreads mirror a common system call. The wrappers serialize execution of the runtime to ensure no race conditions where any Go code observes a non-atomic OS state change. As such, the syscalls have higher runtime overhead than regular system calls, and only need to be used where such thread (or 'm' in the parlance of the runtime sources) consistency is required. The new support is used to enable these functions under Linux: syscall.Setegid(), syscall.Seteuid(), syscall.Setgroups(), syscall.Setgid(), syscall.Setregid(), syscall.Setreuid(), syscall.Setresgid(), syscall.Setresuid() and syscall.Setuid(). They work identically to their glibc counterparts. Extensive discussion of the background issue addressed in this patch can be found here: https://github.com/golang/go/issues/1435 In the case where cgo is used, the C runtime can launch pthreads that are not managed by the Go runtime. As such, the added syscall.AllThreadsSyscall*() return ENOTSUP when cgo is enabled. However, for the 9 syscall.Set*() functions listed above, when cgo is active, these functions redirect to invoke their C.set*() equivalents in glibc, which wraps the raw system calls with a nptl:setxid fixup mechanism. This achieves POSIX semantics for these functions in the combined Go and C runtime. As a side note, the glibc/nptl:setxid support (2019-11-30) does not extend to all security related system calls under Linux so using native Go (CGO_ENABLED=0) and these AllThreadsSyscall*()s, where needed, will yield more well defined/consistent behavior over all threads of a Go program. That is, using the syscall.AllThreadsSyscall*() wrappers for things like setting state through SYS_PRCTL and SYS_CAPSET etc. Fixes #1435 Change-Id: Ib1a3e16b9180f64223196a32fc0f9dce14d9105c Reviewed-on: https://go-review.googlesource.com/c/go/+/210639 Trust: Emmanuel Odeke <emm.odeke@gmail.com> Trust: Ian Lance Taylor <iant@golang.org> Trust: Michael Pratt <mpratt@google.com> Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> Reviewed-by: Michael Pratt <mpratt@google.com> Reviewed-by: Austin Clements <austin@google.com>
2019-12-09 22:50:16 -07:00
{call: "Setreuid(1,0)", fn: func() error { return syscall.Setreuid(1, 0) }, filter: "Uid:", expect: "\t1\t0\t0\t0"},
{call: "Setreuid(0,2)", fn: func() error { return syscall.Setreuid(0, 2) }, filter: "Uid:", expect: "\t0\t2\t2\t2"},
{call: "Setreuid(0,0)", fn: func() error { return syscall.Setreuid(0, 0) }, filter: "Uid:", expect: "\t0\t0\t0\t0"},
syscall: support POSIX semantics for Linux syscalls This change adds two new methods for invoking system calls under Linux: syscall.AllThreadsSyscall() and syscall.AllThreadsSyscall6(). These system call wrappers ensure that all OSThreads mirror a common system call. The wrappers serialize execution of the runtime to ensure no race conditions where any Go code observes a non-atomic OS state change. As such, the syscalls have higher runtime overhead than regular system calls, and only need to be used where such thread (or 'm' in the parlance of the runtime sources) consistency is required. The new support is used to enable these functions under Linux: syscall.Setegid(), syscall.Seteuid(), syscall.Setgroups(), syscall.Setgid(), syscall.Setregid(), syscall.Setreuid(), syscall.Setresgid(), syscall.Setresuid() and syscall.Setuid(). They work identically to their glibc counterparts. Extensive discussion of the background issue addressed in this patch can be found here: https://github.com/golang/go/issues/1435 In the case where cgo is used, the C runtime can launch pthreads that are not managed by the Go runtime. As such, the added syscall.AllThreadsSyscall*() return ENOTSUP when cgo is enabled. However, for the 9 syscall.Set*() functions listed above, when cgo is active, these functions redirect to invoke their C.set*() equivalents in glibc, which wraps the raw system calls with a nptl:setxid fixup mechanism. This achieves POSIX semantics for these functions in the combined Go and C runtime. As a side note, the glibc/nptl:setxid support (2019-11-30) does not extend to all security related system calls under Linux so using native Go (CGO_ENABLED=0) and these AllThreadsSyscall*()s, where needed, will yield more well defined/consistent behavior over all threads of a Go program. That is, using the syscall.AllThreadsSyscall*() wrappers for things like setting state through SYS_PRCTL and SYS_CAPSET etc. Fixes #1435 Change-Id: Ib1a3e16b9180f64223196a32fc0f9dce14d9105c Reviewed-on: https://go-review.googlesource.com/c/go/+/210639 Trust: Emmanuel Odeke <emm.odeke@gmail.com> Trust: Ian Lance Taylor <iant@golang.org> Trust: Michael Pratt <mpratt@google.com> Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> Reviewed-by: Michael Pratt <mpratt@google.com> Reviewed-by: Austin Clements <austin@google.com>
2019-12-09 22:50:16 -07:00
{call: "Setresgid(101,0,102)", fn: func() error { return syscall.Setresgid(101, 0, 102) }, filter: "Gid:", expect: "\t101\t0\t102\t0"},
{call: "Setresgid(0,102,101)", fn: func() error { return syscall.Setresgid(0, 102, 101) }, filter: "Gid:", expect: "\t0\t102\t101\t102"},
{call: "Setresgid(0,0,0)", fn: func() error { return syscall.Setresgid(0, 0, 0) }, filter: "Gid:", expect: "\t0\t0\t0\t0"},
syscall: support POSIX semantics for Linux syscalls This change adds two new methods for invoking system calls under Linux: syscall.AllThreadsSyscall() and syscall.AllThreadsSyscall6(). These system call wrappers ensure that all OSThreads mirror a common system call. The wrappers serialize execution of the runtime to ensure no race conditions where any Go code observes a non-atomic OS state change. As such, the syscalls have higher runtime overhead than regular system calls, and only need to be used where such thread (or 'm' in the parlance of the runtime sources) consistency is required. The new support is used to enable these functions under Linux: syscall.Setegid(), syscall.Seteuid(), syscall.Setgroups(), syscall.Setgid(), syscall.Setregid(), syscall.Setreuid(), syscall.Setresgid(), syscall.Setresuid() and syscall.Setuid(). They work identically to their glibc counterparts. Extensive discussion of the background issue addressed in this patch can be found here: https://github.com/golang/go/issues/1435 In the case where cgo is used, the C runtime can launch pthreads that are not managed by the Go runtime. As such, the added syscall.AllThreadsSyscall*() return ENOTSUP when cgo is enabled. However, for the 9 syscall.Set*() functions listed above, when cgo is active, these functions redirect to invoke their C.set*() equivalents in glibc, which wraps the raw system calls with a nptl:setxid fixup mechanism. This achieves POSIX semantics for these functions in the combined Go and C runtime. As a side note, the glibc/nptl:setxid support (2019-11-30) does not extend to all security related system calls under Linux so using native Go (CGO_ENABLED=0) and these AllThreadsSyscall*()s, where needed, will yield more well defined/consistent behavior over all threads of a Go program. That is, using the syscall.AllThreadsSyscall*() wrappers for things like setting state through SYS_PRCTL and SYS_CAPSET etc. Fixes #1435 Change-Id: Ib1a3e16b9180f64223196a32fc0f9dce14d9105c Reviewed-on: https://go-review.googlesource.com/c/go/+/210639 Trust: Emmanuel Odeke <emm.odeke@gmail.com> Trust: Ian Lance Taylor <iant@golang.org> Trust: Michael Pratt <mpratt@google.com> Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> Reviewed-by: Michael Pratt <mpratt@google.com> Reviewed-by: Austin Clements <austin@google.com>
2019-12-09 22:50:16 -07:00
{call: "Setresuid(1,0,2)", fn: func() error { return syscall.Setresuid(1, 0, 2) }, filter: "Uid:", expect: "\t1\t0\t2\t0"},
{call: "Setresuid(0,2,1)", fn: func() error { return syscall.Setresuid(0, 2, 1) }, filter: "Uid:", expect: "\t0\t2\t1\t2"},
{call: "Setresuid(0,0,0)", fn: func() error { return syscall.Setresuid(0, 0, 0) }, filter: "Uid:", expect: "\t0\t0\t0\t0"},
syscall: support POSIX semantics for Linux syscalls This change adds two new methods for invoking system calls under Linux: syscall.AllThreadsSyscall() and syscall.AllThreadsSyscall6(). These system call wrappers ensure that all OSThreads mirror a common system call. The wrappers serialize execution of the runtime to ensure no race conditions where any Go code observes a non-atomic OS state change. As such, the syscalls have higher runtime overhead than regular system calls, and only need to be used where such thread (or 'm' in the parlance of the runtime sources) consistency is required. The new support is used to enable these functions under Linux: syscall.Setegid(), syscall.Seteuid(), syscall.Setgroups(), syscall.Setgid(), syscall.Setregid(), syscall.Setreuid(), syscall.Setresgid(), syscall.Setresuid() and syscall.Setuid(). They work identically to their glibc counterparts. Extensive discussion of the background issue addressed in this patch can be found here: https://github.com/golang/go/issues/1435 In the case where cgo is used, the C runtime can launch pthreads that are not managed by the Go runtime. As such, the added syscall.AllThreadsSyscall*() return ENOTSUP when cgo is enabled. However, for the 9 syscall.Set*() functions listed above, when cgo is active, these functions redirect to invoke their C.set*() equivalents in glibc, which wraps the raw system calls with a nptl:setxid fixup mechanism. This achieves POSIX semantics for these functions in the combined Go and C runtime. As a side note, the glibc/nptl:setxid support (2019-11-30) does not extend to all security related system calls under Linux so using native Go (CGO_ENABLED=0) and these AllThreadsSyscall*()s, where needed, will yield more well defined/consistent behavior over all threads of a Go program. That is, using the syscall.AllThreadsSyscall*() wrappers for things like setting state through SYS_PRCTL and SYS_CAPSET etc. Fixes #1435 Change-Id: Ib1a3e16b9180f64223196a32fc0f9dce14d9105c Reviewed-on: https://go-review.googlesource.com/c/go/+/210639 Trust: Emmanuel Odeke <emm.odeke@gmail.com> Trust: Ian Lance Taylor <iant@golang.org> Trust: Michael Pratt <mpratt@google.com> Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> Reviewed-by: Michael Pratt <mpratt@google.com> Reviewed-by: Austin Clements <austin@google.com>
2019-12-09 22:50:16 -07:00
}
for i, v := range vs {
if err := v.fn(); err != nil {
t.Errorf("[%d] %q failed: %v", i, v.call, err)
continue
}
if err := compareStatus(v.filter, v.expect); err != nil {
t.Errorf("[%d] %q comparison: %v", i, v.call, err)
}
}
}