1
0
mirror of https://github.com/golang/go synced 2024-10-05 18:31:28 -06:00
go/src/runtime/os1_freebsd.go

222 lines
5.2 KiB
Go
Raw Normal View History

// Copyright 2011 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package runtime
import "unsafe"
// From FreeBSD's <sys/sysctl.h>
const (
_CTL_HW = 6
_HW_NCPU = 3
)
var sigset_none = sigset{}
var sigset_all = sigset{[4]uint32{^uint32(0), ^uint32(0), ^uint32(0), ^uint32(0)}}
func getncpu() int32 {
mib := [2]uint32{_CTL_HW, _HW_NCPU}
out := uint32(0)
nout := unsafe.Sizeof(out)
ret := sysctl(&mib[0], 2, (*byte)(unsafe.Pointer(&out)), &nout, nil, 0)
if ret >= 0 {
return int32(out)
}
return 1
}
// FreeBSD's umtx_op syscall is effectively the same as Linux's futex, and
// thus the code is largely similar. See Linux implementation
// and lock_futex.c for comments.
//go:nosplit
func futexsleep(addr *uint32, val uint32, ns int64) {
[dev.cc] runtime: delete scalararg, ptrarg; rename onM to systemstack Scalararg and ptrarg are not "signal safe". Go code filling them out can be interrupted by a signal, and then the signal handler runs, and if it also ends up in Go code that uses scalararg or ptrarg, now the old values have been smashed. For the pieces of code that do need to run in a signal handler, we introduced onM_signalok, which is really just onM except that the _signalok is meant to convey that the caller asserts that scalarg and ptrarg will be restored to their old values after the call (instead of the usual behavior, zeroing them). Scalararg and ptrarg are also untyped and therefore error-prone. Go code can always pass a closure instead of using scalararg and ptrarg; they were only really necessary for C code. And there's no more C code. For all these reasons, delete scalararg and ptrarg, converting the few remaining references to use closures. Once those are gone, there is no need for a distinction between onM and onM_signalok, so replace both with a single function equivalent to the current onM_signalok (that is, it can be called on any of the curg, g0, and gsignal stacks). The name onM and the phrase 'm stack' are misnomers, because on most system an M has two system stacks: the main thread stack and the signal handling stack. Correct the misnomer by naming the replacement function systemstack. Fix a few references to "M stack" in code. The main motivation for this change is to eliminate scalararg/ptrarg. Rick and I have already seen them cause problems because the calling sequence m.ptrarg[0] = p is a heap pointer assignment, so it gets a write barrier. The write barrier also uses onM, so it has all the same problems as if it were being invoked by a signal handler. We worked around this by saving and restoring the old values and by calling onM_signalok, but there's no point in keeping this nice home for bugs around any longer. This CL also changes funcline to return the file name as a result instead of filling in a passed-in *string. (The *string signature is left over from when the code was written in and called from C.) That's arguably an unrelated change, except that once I had done the ptrarg/scalararg/onM cleanup I started getting false positives about the *string argument escaping (not allowed in package runtime). The compiler is wrong, but the easiest fix is to write the code like Go code instead of like C code. I am a bit worried that the compiler is wrong because of some use of uninitialized memory in the escape analysis. If that's the reason, it will go away when we convert the compiler to Go. (And if not, we'll debug it the next time.) LGTM=khr R=r, khr CC=austin, golang-codereviews, iant, rlh https://golang.org/cl/174950043
2014-11-12 12:54:31 -07:00
systemstack(func() {
futexsleep1(addr, val, ns)
})
}
func futexsleep1(addr *uint32, val uint32, ns int64) {
var tsp *timespec
if ns >= 0 {
var ts timespec
ts.tv_nsec = 0
ts.set_sec(timediv(ns, 1000000000, (*int32)(unsafe.Pointer(&ts.tv_nsec))))
tsp = &ts
}
ret := sys_umtx_op(addr, _UMTX_OP_WAIT_UINT_PRIVATE, val, nil, tsp)
if ret >= 0 || ret == -_EINTR {
return
}
print("umtx_wait addr=", addr, " val=", val, " ret=", ret, "\n")
*(*int32)(unsafe.Pointer(uintptr(0x1005))) = 0x1005
}
//go:nosplit
func futexwakeup(addr *uint32, cnt uint32) {
ret := sys_umtx_op(addr, _UMTX_OP_WAKE_PRIVATE, cnt, nil, nil)
if ret >= 0 {
return
}
[dev.cc] runtime: delete scalararg, ptrarg; rename onM to systemstack Scalararg and ptrarg are not "signal safe". Go code filling them out can be interrupted by a signal, and then the signal handler runs, and if it also ends up in Go code that uses scalararg or ptrarg, now the old values have been smashed. For the pieces of code that do need to run in a signal handler, we introduced onM_signalok, which is really just onM except that the _signalok is meant to convey that the caller asserts that scalarg and ptrarg will be restored to their old values after the call (instead of the usual behavior, zeroing them). Scalararg and ptrarg are also untyped and therefore error-prone. Go code can always pass a closure instead of using scalararg and ptrarg; they were only really necessary for C code. And there's no more C code. For all these reasons, delete scalararg and ptrarg, converting the few remaining references to use closures. Once those are gone, there is no need for a distinction between onM and onM_signalok, so replace both with a single function equivalent to the current onM_signalok (that is, it can be called on any of the curg, g0, and gsignal stacks). The name onM and the phrase 'm stack' are misnomers, because on most system an M has two system stacks: the main thread stack and the signal handling stack. Correct the misnomer by naming the replacement function systemstack. Fix a few references to "M stack" in code. The main motivation for this change is to eliminate scalararg/ptrarg. Rick and I have already seen them cause problems because the calling sequence m.ptrarg[0] = p is a heap pointer assignment, so it gets a write barrier. The write barrier also uses onM, so it has all the same problems as if it were being invoked by a signal handler. We worked around this by saving and restoring the old values and by calling onM_signalok, but there's no point in keeping this nice home for bugs around any longer. This CL also changes funcline to return the file name as a result instead of filling in a passed-in *string. (The *string signature is left over from when the code was written in and called from C.) That's arguably an unrelated change, except that once I had done the ptrarg/scalararg/onM cleanup I started getting false positives about the *string argument escaping (not allowed in package runtime). The compiler is wrong, but the easiest fix is to write the code like Go code instead of like C code. I am a bit worried that the compiler is wrong because of some use of uninitialized memory in the escape analysis. If that's the reason, it will go away when we convert the compiler to Go. (And if not, we'll debug it the next time.) LGTM=khr R=r, khr CC=austin, golang-codereviews, iant, rlh https://golang.org/cl/174950043
2014-11-12 12:54:31 -07:00
systemstack(func() {
print("umtx_wake_addr=", addr, " ret=", ret, "\n")
})
}
func thr_start()
func newosproc(mp *m, stk unsafe.Pointer) {
if false {
print("newosproc stk=", stk, " m=", mp, " g=", mp.g0, " thr_start=", funcPC(thr_start), " id=", mp.id, "/", mp.tls[0], " ostk=", &mp, "\n")
}
// NOTE(rsc): This code is confused. stackbase is the top of the stack
// and is equal to stk. However, it's working, so I'm not changing it.
param := thrparam{
start_func: funcPC(thr_start),
arg: unsafe.Pointer(mp),
stack_base: mp.g0.stack.hi,
stack_size: uintptr(stk) - mp.g0.stack.hi,
child_tid: unsafe.Pointer(&mp.procid),
parent_tid: nil,
tls_base: unsafe.Pointer(&mp.tls[0]),
tls_size: unsafe.Sizeof(mp.tls),
}
mp.tls[0] = uintptr(mp.id) // so 386 asm can find it
var oset sigset
sigprocmask(&sigset_all, &oset)
thr_new(&param, int32(unsafe.Sizeof(param)))
sigprocmask(&oset, nil)
}
func osinit() {
ncpu = getncpu()
}
var urandom_data [_HashRandomBytes]byte
var urandom_dev = []byte("/dev/random\x00")
//go:nosplit
func get_random_data(rnd *unsafe.Pointer, rnd_len *int32) {
fd := open(&urandom_dev[0], 0 /* O_RDONLY */, 0)
if read(fd, unsafe.Pointer(&urandom_data), _HashRandomBytes) == _HashRandomBytes {
*rnd = unsafe.Pointer(&urandom_data[0])
*rnd_len = _HashRandomBytes
} else {
*rnd = nil
*rnd_len = 0
}
close(fd)
}
func goenvs() {
goenvs_unix()
}
// Called to initialize a new m (including the bootstrap m).
// Called on the parent thread (main thread in case of bootstrap), can allocate memory.
func mpreinit(mp *m) {
mp.gsignal = malg(32 * 1024)
mp.gsignal.m = mp
}
// Called to initialize a new m (including the bootstrap m).
// Called on the new thread, can not allocate memory.
func minit() {
_g_ := getg()
// m.procid is a uint64, but thr_new writes a uint32 on 32-bit systems.
// Fix it up. (Only matters on big-endian, but be clean anyway.)
if ptrSize == 4 {
_g_.m.procid = uint64(*(*uint32)(unsafe.Pointer(&_g_.m.procid)))
}
// Initialize signal handling.
signalstack((*byte)(unsafe.Pointer(_g_.m.gsignal.stack.lo)), 32*1024)
sigprocmask(&sigset_none, nil)
}
// Called from dropm to undo the effect of an minit.
func unminit() {
signalstack(nil, 0)
}
func memlimit() uintptr {
/*
TODO: Convert to Go when something actually uses the result.
Rlimit rl;
extern byte runtime·text[], runtime·end[];
uintptr used;
if(runtime·getrlimit(RLIMIT_AS, &rl) != 0)
return 0;
if(rl.rlim_cur >= 0x7fffffff)
return 0;
// Estimate our VM footprint excluding the heap.
// Not an exact science: use size of binary plus
// some room for thread stacks.
used = runtime·end - runtime·text + (64<<20);
if(used >= rl.rlim_cur)
return 0;
// If there's not at least 16 MB left, we're probably
// not going to be able to do much. Treat as no limit.
rl.rlim_cur -= used;
if(rl.rlim_cur < (16<<20))
return 0;
return rl.rlim_cur - used;
*/
return 0
}
func sigtramp()
type sigactiont struct {
sa_handler uintptr
sa_flags int32
sa_mask sigset
}
func setsig(i int32, fn uintptr, restart bool) {
var sa sigactiont
sa.sa_flags = _SA_SIGINFO | _SA_ONSTACK
if restart {
sa.sa_flags |= _SA_RESTART
}
sa.sa_mask = sigset_all
if fn == funcPC(sighandler) {
fn = funcPC(sigtramp)
}
sa.sa_handler = fn
sigaction(i, &sa, nil)
}
func getsig(i int32) uintptr {
var sa sigactiont
sigaction(i, nil, &sa)
if sa.sa_handler == funcPC(sigtramp) {
return funcPC(sighandler)
}
return sa.sa_handler
}
func signalstack(p *byte, n int32) {
var st stackt
st.ss_sp = uintptr(unsafe.Pointer(p))
st.ss_size = uintptr(n)
st.ss_flags = 0
if p == nil {
st.ss_flags = _SS_DISABLE
}
sigaltstack(&st, nil)
}
func unblocksignals() {
sigprocmask(&sigset_none, nil)
}